bertmannaustria Posted April 8, 2010 Author Share Posted April 8, 2010 now i am getting the nanoseconds error how do i resolve this one? nanoseconds is not an error, it just shows you how long your system was running until the kernel panic occurred. if you get a black screen, try all ports on your graphiccard, try it with and without a dvi2vga adapter now i am getting the nanoseconds error how do i resolve this one? btw boot into 64 bit mode, use the latest pcefi from netkas Link to comment Share on other sites More sharing options...
Hakintos Posted April 10, 2010 Share Posted April 10, 2010 Results 229.89 System Info Xbench Version 1.3 System Version 10.6.1 (10B504) Physical RAM 6144 MB Model MacPro4,1 Drive Type WDC WD1500HLFS-01G6U0 CPU Test 200.29 Thread Test 736.39 Memory Test 418.18 System 454.33 Stream 387.36 Quartz Graphics Test 297.58 OpenGL Graphics Test 168.01 User Interface Test 309.12 Sequential 188.62 Random 76.82 -------------------------------------------------------------------------------- Results 234.17 System Info Xbench Version 1.3 System Version 10.6.2 (10C540) Physical RAM 6144 MB Model MacPro4,1 Drive Type WDC WD1500HLFS-01G6U0 CPU Test 190.85 Thread Test 895.28 Memory Test 350.94 System 369.90 Stream 333.84 Quartz Graphics Test 285.51 OpenGL Graphics Test 188.83 User Interface Test 387.73 Disk Test 107.42 Sequential 182.21 Random 76.16 -------------------------------------------------------------------------------- Results 191.29 System Info Xbench Version 1.3 System Version 10.6.3 (10D573) Physical RAM 6144 MB Model MacPro4,1 Drive Type WDC WD1500HLFS-01G6U0 CPU Test 190.61 Thread Test 777.72 Memory Test 364.43 System 401.25 Stream 333.79 Quartz Graphics Test 284.26 OpenGL Graphics Test 259.15 User Interface Test 384.85 Disk Test 57.66 Sequential 79.05 :angry2: Random 45.38 :angry2: -------------------------------------------------------------------------------- Results 242.52 System Info Xbench Version 1.3 System Version 10.6.4 (10F569) Physical RAM 6144 MB Model MacPro4,1 Drive Type WDC WD1500HLFS-01G6U0 CPU Test 190.51 Thread Test 908.71 Memory Test 384.30 System 450.11 Stream 335.28 Quartz Graphics Test 289.61 OpenGL Graphics Test 298.91 User Interface Test 395.99 Disk Test 94.44 Sequential 170.71 Random 65.28 ---------------------------------------------------------------------------------- Results 257.88 System Info Xbench Version 1.3 System Version 10.6.6 (10J567) Physical RAM 6144 MB Model MacPro4,1 Drive Type WDC WD1500HLFS-01G6U0 CPU Test 188.67 Thread Test 923.94 Memory Test 385.07 System 453.31 Stream 334.69 Quartz Graphics Test 285.87 OpenGL Graphics Test 299.19 User Interface Test 413.81 Disk Test 112.26 Sequential 200.46 Random 77.96 ---------------------------------------------------------------------------------- Results 249.57 System Info Xbench Version 1.3 System Version 10.6.7 (10J858) Physical RAM 6144 MB Model MacPro4,1 Drive Type WDC WD1500HLFS-01G6U0 CPU Test 189.44 Thread Test 934.05 Memory Test 388.39 System 452.91 Stream 339.95 Quartz Graphics Test 288.69 OpenGL Graphics Test 299.79 User Interface Test 447.21 Disk Test 99.12 Sequential 157.17 Random 72.39 Link to comment Share on other sites More sharing options...
CrAkD Posted May 19, 2010 Share Posted May 19, 2010 I have everything working but Ive noticed some weird bugs. Like sometimes some apps will crash. I had to load itunes twice before it showed up. Also im only getting around 6800 on geekbench 64. when I've seen some other users here that are getting 9000+ with my setup. I installed via Kakewalk. heres my setup. i7 920 Gigabyte UD4P 6gb OCZ Platinum 1600mhz DDR3 Nvidia 9500GT 2x 640gb WD Caviar Black SATA I also noticed in system profiler it shows my computer as a MacPro 3,1 where I see alot of others with the same setup showing up as MacPro4,1 The modelname key in the apple boot.plist didnt work either still says macpro3,1 anyone know if theres anything I can check or any tweaks I can do to get the geekbench score up or just a bit more stable. Link to comment Share on other sites More sharing options...
bertmannaustria Posted May 19, 2010 Author Share Posted May 19, 2010 I have everything working but Ive noticed some weird bugs. Like sometimes some apps will crash. I had to load itunes twice before it showed up. Also im only getting around 6800 on geekbench 64. when I've seen some other users here that are getting 9000+ with my setup. I installed via Kakewalk. heres my setup. i7 920 Gigabyte UD4P 6gb OCZ Platinum 1600mhz DDR3 Nvidia 9500GT 2x 640gb WD Caviar Black SATA I also noticed in system profiler it shows my computer as a MacPro 3,1 where I see alot of others with the same setup showing up as MacPro4,1 The modelname key in the apple boot.plist didnt work either still says macpro3,1 anyone know if theres anything I can check or any tweaks I can do to get the geekbench score up or just a bit more stable. hi, download gigabyte package and use my smbios.plist Link to comment Share on other sites More sharing options...
CrAkD Posted May 19, 2010 Share Posted May 19, 2010 hi, download gigabyte package and use my smbios.plist thank you for replying! where would I get both the package and your smbios.plist? I tried searching this thread and didnt find the smbios file. did you mean your aboutthismac.pkg? And which gigabyte package? the 10.6.3. on the first page? Link to comment Share on other sites More sharing options...
bertmannaustria Posted June 11, 2010 Author Share Posted June 11, 2010 thank you for replying! where would I get both the package and your smbios.plist? I tried searching this thread and didnt find the smbios file. did you mean your aboutthismac.pkg? And which gigabyte package? the 10.6.3. on the first page? ja, everything from the first page Link to comment Share on other sites More sharing options...
cfreakyo Posted June 15, 2010 Share Posted June 15, 2010 hey guys, i know this just came out today but has anyone tried the update to 10.6.4? EDIT: Just did the combo update and all is well so far. audio is working and everything else that I can tell. Link to comment Share on other sites More sharing options...
lmps56 Posted June 16, 2010 Share Posted June 16, 2010 hey guys, i know this just came out today but has anyone tried the update to 10.6.4? EDIT: Just did the combo update and all is well so far. audio is working and everything else that I can tell. Thanks for the info. What about sleepenabler? Is there a new version out there yet? Thank you Link to comment Share on other sites More sharing options...
sk8er000 Posted June 18, 2010 Share Posted June 18, 2010 10.6.4 is avaiable..Bert HELP US PLEASE!!! Link to comment Share on other sites More sharing options...
JustinAiken Posted June 18, 2010 Share Posted June 18, 2010 Seemed to be a smooth update... just deleted SleepEnabler (and my mkext), installed from Software Update... Sound, gfx, ethernet... everything's working EDIT - I'm using 32 bit mode. Link to comment Share on other sites More sharing options...
cfreakyo Posted June 19, 2010 Share Posted June 19, 2010 Yeah worked fine for me. I never had SleepEnabler on my system. All I did was download the combo update, ran it, and it worked fine. Everything seems to be working fine for me, that I can tell at the moment. Link to comment Share on other sites More sharing options...
Hakintos Posted June 20, 2010 Share Posted June 20, 2010 Visit My Post update 10.6.4 64bits Link to comment Share on other sites More sharing options...
sk8er000 Posted June 21, 2010 Share Posted June 21, 2010 does anyone know if Sleepenabler posted by bertmanaustria in the last update works with 10.6.4? Link to comment Share on other sites More sharing options...
sk8er000 Posted June 30, 2010 Share Posted June 30, 2010 does anyone know if Sleepenabler posted by bertmanaustria in the last update works with 10.6.4? if you install the combo update 10.6.4 with sleepenabler you'll got a kernel panic... if you want update to 10.6.4 you have to erase SleepEnabler.kext from S/L/E and E/E Link to comment Share on other sites More sharing options...
sk8er000 Posted June 30, 2010 Share Posted June 30, 2010 if you install the combo update 10.6.4 with sleepenabler you'll got a kernel panic... if you want update to 10.6.4 you have to erase SleepEnabler.kext from S/L/E and E/E With the new kext posted by Bertmannaustria on the first topic sleep mode works again!!! thank you very much!!! I appreciate your commitment!! Link to comment Share on other sites More sharing options...
FlavioX Posted July 31, 2010 Share Posted July 31, 2010 I have installed the Delock Gigabit LAN PCI Express Karte, 1 Port (89156) based on the recommendation on the first page of this topic but I cannot get JumboFrames activated. The card was recognized immediately. I can only set the MTU to 1500 in System Preferences. Any idea how to do set it to 9000? Link to comment Share on other sites More sharing options...
Skaptor Posted August 13, 2010 Share Posted August 13, 2010 Hey thanks for the guide, everything is fine. I have two hard drives (1 with win 7 and the other 1 with OSX) When i boot onto OSX and change time somehow osx manages to screw up my BIOS settings and windows 7 time. Any fix? Link to comment Share on other sites More sharing options...
swisspeep Posted August 14, 2010 Share Posted August 14, 2010 Hey all, I have my machine up and running thanks to this guide for over 8 months now. Never had serious issues. Only this time I have a slight annoyance... My sleep is broken! It goes to sleep fine but doesn't wake up (Power LED goes on, screen stays blank) Using 10.6.4 with appropriate SleepEnabler.kext Is anyone else seeing this behavior? Link to comment Share on other sites More sharing options...
swisspeep Posted August 14, 2010 Share Posted August 14, 2010 Hey thanks for the guide, everything is fine. I have two hard drives (1 with win 7 and the other 1 with OSX) When i boot onto OSX and change time somehow osx manages to screw up my BIOS settings and windows 7 time. Any fix? I think this got fixed in one of the later versions of Chameleon 2. If you are on RC 2/3, try 4. Link to comment Share on other sites More sharing options...
bertmannaustria Posted August 14, 2010 Author Share Posted August 14, 2010 Hey all, I have my machine up and running thanks to this guide for over 8 months now. Never had serious issues. Only this time I have a slight annoyance... My sleep is broken! It goes to sleep fine but doesn't wake up (Power LED goes on, screen stays blank) Using 10.6.4 with appropriate SleepEnabler.kext Is anyone else seeing this behavior? hi there chameleon 5 pre12 try the latest bootloader, i need to test it and add it to my guide if it works fine but i'm at starbucks right now good luck Link to comment Share on other sites More sharing options...
swisspeep Posted August 14, 2010 Share Posted August 14, 2010 hi therechameleon 5 pre12 try the latest bootloader, i need to test it and add it to my guide if it works fine but i'm at starbucks right now good luck Updated the bootloader. Not really miracle salvation With the dsdt I found here, Black screen on boot. With a dsdt found on kexts.com boot works. Audio broken. In the end I was able to go into sleep and wake-up. A few minutes after wake-up, kernel panic. Ouch... Searched the logs but couldn't find a reason. So, reboot... Try to sleep again. Wake up... Black screen. It worked once (well, with a nice Kernel Panic to top it off), but now I'm back to black screening. Some dsdt tweaking should do the trick. But I have no idea where to start. Is there like good documentation or a commented file to be found anywhere? In any case, Bertmann. Vielen dank! I'm sure if you would post a 'donate now' button somewhere here, your fans would show their gratitude Link to comment Share on other sites More sharing options...
bertmannaustria Posted August 15, 2010 Author Share Posted August 15, 2010 Updated the bootloader. Not really miracle salvation With the dsdt I found here, Black screen on boot. With a dsdt found on kexts.com boot works. Audio broken. In the end I was able to go into sleep and wake-up. A few minutes after wake-up, kernel panic. Ouch... Searched the logs but couldn't find a reason. So, reboot... Try to sleep again. Wake up... Black screen. It worked once (well, with a nice Kernel Panic to top it off), but now I'm back to black screening. Some dsdt tweaking should do the trick. But I have no idea where to start. Is there like good documentation or a commented file to be found anywhere? In any case, Bertmann. Vielen dank! I'm sure if you would post a 'donate now' button somewhere here, your fans would show their gratitude bitte gerne i'm working on it, many things have changed and i need to start tweaking my dsdt to work probably again with the newest bootloader. hmm donate ... donate hardware i would think about it *g* Link to comment Share on other sites More sharing options...
Skaptor Posted August 16, 2010 Share Posted August 16, 2010 I think this got fixed in one of the later versions of Chameleon 2.If you are on RC 2/3, try 4. Im on chameleon 2 RC4 Link to comment Share on other sites More sharing options...
Skaptor Posted August 22, 2010 Share Posted August 22, 2010 Hey how can i (please tell me how to do it) undo 64 bits mac os x for compatibility? i want to be on 32 bits please help Link to comment Share on other sites More sharing options...
Ske Posted September 29, 2010 Share Posted September 29, 2010 Hi guys, I formatted my computer and installed additional hdds... Now I have 2x320 GB in raid 0 and 2x1000GB in raid 0...previously I had OSx on a external HDD, but it got "burnt", so it's completely dead. Now I was wondering if it's possibile to do so: HDD0 2x320GB: - Partition 1: System _ 500MB mirrored with the partition 1 on the other raid - Partition 2: Windows 7 64 Bit _ 250 GB - Partition 3: Snow Leopard 10.6.4 _ 200 GB - Partition 4: Ubuntu 10.04 _ 157,5 GB - Partition 5: Linux Swap _ 12 GB HDD1 2x1000GB - Partition 1: System _ 500MB (mirrored from the other one, to have a copy of the boot root) - Partition 2: Windows 7 64 Bit _ 50 GB (as a system for urgency) - Partition 3: Data0 _ 1000 GB - Partition 4: Data1 _ 500 GB - Partition 5: Backups _ 449.5 GB In your opinion, is this possibile, starting without any operable osx system? And if it's possibile, can you give me some advice or link guide? PS: I was forgetting my system: GA-EX58-UD4P Radeon Sapphire 4870 1GB Vapor-X 2x320GB raid 0 2x1000GB raid 0 3x2GB Corsairs 1600mhz ddr3 i7 920 @ 3,8 Ghz Link to comment Share on other sites More sharing options...
Recommended Posts