martisti Posted February 14, 2009 Share Posted February 14, 2009 Hi, I've installed it on my desktop and it RULEZZZZZZZZZ!!! Now the question: I saw that at the end of the list in installation is Netbook MSI Wind U100...If I want to install it on MSI what should I select?Only this or something else too? Thanks for the good job!!! Link to comment https://www.insanelymac.com/forum/topic/151791-ideneb-v14-1056-released/page/5/#findComment-1080134 Share on other sites More sharing options...
crosis Posted February 14, 2009 Share Posted February 14, 2009 Hi all, I tried to prepare an USB stick to install from. I used "Leopard install helper" (dd.exe), as described here, but after booting from the USB stick all I get is a screen with 4 or 5 lines of some random characters. The ISO I have is correct (checked md5). Unfortunately I don't have an external DVD drive to use (I use Acer Aspire One netbook). Have any of you experienced such issues? How to solve it? How to install the iDeneb on AA1? I've got exactly the same issue. I "burned" iso on the ocz rally 2 8gb and all I got was bunch of hex numbers and some }*!'s. I'm trying this both on PC (AB9Pro) and MSI Wind with either ahci disabled or enabled. On Wind i'm trying this using pendrive, on PC - burned on DVD. Both ways brings the same results. Any advice? Link to comment https://www.insanelymac.com/forum/topic/151791-ideneb-v14-1056-released/page/5/#findComment-1080192 Share on other sites More sharing options...
yidakee Posted February 14, 2009 Share Posted February 14, 2009 Success !! Running Asus A6JC laptop! Everything seems nice and dandy except I didnt get QE working with NVinject Go 128 from the distro. Loaded NYC Coyote's modified kext and video plays really nice + dual monitor support! my xbech went from 89 to 120 with this kext. Rock on! link to kext; http://www.insanelymac.com/forum/index.php...p;#entry1080236 Link to comment https://www.insanelymac.com/forum/topic/151791-ideneb-v14-1056-released/page/5/#findComment-1080243 Share on other sites More sharing options...
Tengaar Posted February 14, 2009 Share Posted February 14, 2009 So far iDeneb is still the most compatible distro for my shuttle SP35P2. <3 However this time my USB speaker doesn't work . Not sure if i should reinstall again or if there is a quicker fix. nvm about the USB speaker thing, it worked perfectly. Link to comment https://www.insanelymac.com/forum/topic/151791-ideneb-v14-1056-released/page/5/#findComment-1080332 Share on other sites More sharing options...
cfbarrerap Posted February 14, 2009 Share Posted February 14, 2009 hi everyone i have a problem in the disk utility, the ideneb 1.4 dvd boots, i switch between the IDE and AHCI mode, but dont show the SATA disk in the disk utility. My Mother Board is an Asus m2a-vm, chipset amd 690g, athlon 6000+, 2 gb ram 800mhz i had installed iDeneb 1.3, with 0 problems. could someone help me? please, please help me! thanks for your help! Link to comment https://www.insanelymac.com/forum/topic/151791-ideneb-v14-1056-released/page/5/#findComment-1080414 Share on other sites More sharing options...
xpertvision Posted February 14, 2009 Share Posted February 14, 2009 this is the first distro i can install (all others freeze in the first lines at install dvd boot) but after install i cant boot... and there is no error message , the osx get stuck in the first lines i heard P45 chipsets are now suported and doenst need to flash the mobo bios to a moded one , but is that true? i cant install NONE releases... (and all of them work good in my old pcs) my specs are: intel quad 6600 mobo asus P5Q dvdrw samsung sata hard drive 500GB samsung sata 2 any tips please? I've tried in my Core i7... and... IT INSTALL!!!! It's the first distribution of hackintosch that works! But... when it restarts (at the finish of installation)... can't boot! Appear one second the apple at center and restart! Can anyone help me? Thx! ByE! Thanks to iDeneb team for this My specs: MSI P7NGM mobo with NVIDIA Geforce 9300/nForce 730i (MCP7A) Chipset 8gb ram WD Sata internal hhd 80gb Intel e2140 cpu I've tried various combinations in installing this but when after installation and reboot shows mac framework successfully initialized using 16384 buffer headers and 4096 cluster io buffer headers and stops. I'm an osx86 noob and I can't figure out how to get around this. Can anyone help??? I'm desperately tearing my hair out!! Thanks... i have the same problem in all distros , this was the first i cant boot to install dvd , but after install sucessefull i have the same problem... it stops with "mac framework successfully initialized" message funny i have all distros installed in my old pcs , P4 3200mhz and amd 64 3200+ and they work fine motherboards with P45 chipsets must be flashed with a modified bios (but this scare me a alot) and recently i heard this is not needed anymore... anyone can answer this please? what options i must install in my asus P5Q motherboard? Link to comment https://www.insanelymac.com/forum/topic/151791-ideneb-v14-1056-released/page/5/#findComment-1080525 Share on other sites More sharing options...
svopp2000 Posted February 14, 2009 Share Posted February 14, 2009 Hi! I have installed iDeneb 10.5.6 with Voodoo kernel and it acts the same as with iPC 10.5.6, every apps can not start. EXC_BAD_ADDRESS on all apps! In iDeneb 10.5.6 installation I used seatbelt fix Voodoo 9.6. Did not work. Have also tried to install iDeneb with only IHCx driver and Vanilla kernel 9.6. Reboot direct in the beginning. Can no see even in -v verbose mode. I have Gigabyte P35-DS4 v2.0, Nvidia 8800GTS 640Mb dev.id:0x0193. CPU Q6600 Quad core. Audio ALC889, NIC Realtek R8111. How shall I do to make vanilla kernel 9.6 work? Give some howto... I still use iDeneb 10.5.5 on another disk. Still working great. I realy want vanilla kernel to work. Regards svopp2000 Link to comment https://www.insanelymac.com/forum/topic/151791-ideneb-v14-1056-released/page/5/#findComment-1080566 Share on other sites More sharing options...
Gabi Boucher Posted February 15, 2009 Share Posted February 15, 2009 I had a problem in release 1.3...when I used the latest nforce drivers I had a kernel panic when the hard drive was reading/writing big files, when I used older nforce drivers that problem was gone but my SATA DVD was not reading any disc....do you know if in 1.4 I have the same problem? My spec is Asus M2N-MX AMD 4200+ GeForce 8600GT 256/128, SATA HDD and SATA DVD-ROM...please reply to this post as I am kinda desperate because of this problem. Thanks. PS: That motherboard has nForce 4 chipset LE: I tried installing it and i can't even boot from the DVD...it stucks at AppleNForceATA: found 1 units. ...and after booting with -x -v -s -f I have the Still waiting for root device problem. Please help!!! Link to comment https://www.insanelymac.com/forum/topic/151791-ideneb-v14-1056-released/page/5/#findComment-1080910 Share on other sites More sharing options...
hamada2232313 Posted February 15, 2009 Share Posted February 15, 2009 i have the same problem as V 1.3 after installation completed and restart my pc i have the grey screen with apple logo with cross over the apple !!!! and nothing happen after that i have choosed Voodoo Kernel + "Seatbelt Fix" my pc gigabyte 945 ps3 8600 Gt 256 mb ddr3 2 gb ddr2 cpu 3/4 mb cash dual core any help to continue installation perfectly ???? Link to comment https://www.insanelymac.com/forum/topic/151791-ideneb-v14-1056-released/page/5/#findComment-1081061 Share on other sites More sharing options...
Gabi Boucher Posted February 15, 2009 Share Posted February 15, 2009 i have the same problem as V 1.3 after installation completed and restart my pc i have the grey screen with apple logo with cross over the apple !!!! and nothing happen after that i have choosed Voodoo Kernel + "Seatbelt Fix" my pc gigabyte 945 ps3 8600 Gt 256 mb ddr3 2 gb ddr2 cpu 3/4 mb cash dual core any help to continue installation perfectly ???? You had same problem as me in version 1.3? Link to comment https://www.insanelymac.com/forum/topic/151791-ideneb-v14-1056-released/page/5/#findComment-1081079 Share on other sites More sharing options...
yauhui Posted February 15, 2009 Share Posted February 15, 2009 What could make iDeneb even awesomer would be iLife and iWork bundled together. Link to comment https://www.insanelymac.com/forum/topic/151791-ideneb-v14-1056-released/page/5/#findComment-1081109 Share on other sites More sharing options...
twilight.lee Posted February 15, 2009 Share Posted February 15, 2009 Hi all, I tried to prepare an USB stick to install from. I used "Leopard install helper" (dd.exe), as described here, but after booting from the USB stick all I get is a screen with 4 or 5 lines of some random characters. The ISO I have is correct (checked md5). Unfortunately I don't have an external DVD drive to use (I use Acer Aspire One netbook). Have any of you experienced such issues? How to solve it? How to install the iDeneb on AA1? Here is the guide of Leopard HD Install helper. You can download attachment , and see english_gui.png in it. NOTE: the files boot1h , boot_v8 , boot , CHAIN0 in the attachment are necessary , be sure they with the main program ddmac.exe at same folder. I suggest you uncheck PC_EFI v8 when you use Leopard HD install helper dump ISO to your USB stick. If it's still don't work , read this [HOW TO] Install OS X without CD/DVD drive, but with a USB stick Good Luck! Link to comment https://www.insanelymac.com/forum/topic/151791-ideneb-v14-1056-released/page/5/#findComment-1081145 Share on other sites More sharing options...
DeDDi Posted February 15, 2009 Share Posted February 15, 2009 Were to download?? Does anybody have an demonoid inv code to me?? PM me if so Thanks, I will be seeding!!! Link to comment https://www.insanelymac.com/forum/topic/151791-ideneb-v14-1056-released/page/5/#findComment-1081213 Share on other sites More sharing options...
Gabi Boucher Posted February 15, 2009 Share Posted February 15, 2009 Can someone please help me and answer me to my 2 simple questions I asked earlier?! I am kinda desperate...sorry... Link to comment https://www.insanelymac.com/forum/topic/151791-ideneb-v14-1056-released/page/5/#findComment-1081356 Share on other sites More sharing options...
zayane Posted February 15, 2009 Share Posted February 15, 2009 Works fine on my Dell Precision 390. - Intel Core 2 Quad 2,40 GHz - 6 GB 667 MHz - Pioneer DVD-RW DVR-115D + Philips DVD+/-RW DVD8801 - SATA HD : 500 GB + 750 GB - Nvidia 8600 GT 512 MB Link to comment https://www.insanelymac.com/forum/topic/151791-ideneb-v14-1056-released/page/5/#findComment-1081394 Share on other sites More sharing options...
DeDDi Posted February 15, 2009 Share Posted February 15, 2009 Were to download? I would really like this. Last time I used the Kalyway 10.5.2. Worked but nok so good... So if you know about a place to download please informe me Link to comment https://www.insanelymac.com/forum/topic/151791-ideneb-v14-1056-released/page/5/#findComment-1081420 Share on other sites More sharing options...
pvutop Posted February 15, 2009 Share Posted February 15, 2009 Tried this great release on a Acer Aspire One. Installation goes fine but boot hangs the screen. Music plays but the screen never comes back. Mouse pointer can be seen randomly. Any one has a tip on this? install does not work if bios is 3309 must be lower. Installed with AA1 selected as only customization. iDeneb v1.4 10.5.6 for Intel/AMD ( SSE2/SSE3): Developed by Layne, Cri900 and insanelymac Team. Artwork by The captain. Thanks to Tester, Piper2. Thanks to all the OSx86 developers. For More info you can visit the official site: http://ideneb.net Link to comment https://www.insanelymac.com/forum/topic/151791-ideneb-v14-1056-released/page/5/#findComment-1081511 Share on other sites More sharing options...
facelessone Posted February 15, 2009 Share Posted February 15, 2009 go safe mode and install graphic driver. Then it will boot into normal mode. Link to comment https://www.insanelymac.com/forum/topic/151791-ideneb-v14-1056-released/page/5/#findComment-1081612 Share on other sites More sharing options...
DeDDi Posted February 15, 2009 Share Posted February 15, 2009 Hello?? Were can I download this??? Torrent or FTP please!!! Would really be nice of you guys to give me a link At this time I'm only finding the 10.5.5 release.... Link to comment https://www.insanelymac.com/forum/topic/151791-ideneb-v14-1056-released/page/5/#findComment-1081638 Share on other sites More sharing options...
Iced Angel Posted February 16, 2009 Share Posted February 16, 2009 I installed this several time and after the first restart I got a white error on apple logo and nothing happens. I went back to 10.5.5 which was working fine, and installed it again, but now it recognizes only one core of my CPU. I know a lot of people have had the same problem and got no answer ... anyone can help me with this?? I have a core2Duo @ 2.2GHZ, and now only one core works on iDeneb v1.3 Link to comment https://www.insanelymac.com/forum/topic/151791-ideneb-v14-1056-released/page/5/#findComment-1081813 Share on other sites More sharing options...
Amit Meena Posted February 16, 2009 Share Posted February 16, 2009 hello mac pros...... today i finished my ideneb v1.4 leopard 10.5.2 download and installed it on my PC........and it installed perfectly.......but after the whole installation when i restarted my PC i got that reboot error than i booted mac in verbose mode and got that error(displayed in pic).......... it was also showing 64bit enabled but i'm working on 32 bit......... can someone please help me.........i selected sleep kernal...... hey friends i got this problem fixed by changing kernal............but i got new problem......... here is it what i got when i booted in verbose mode............ that was from normal mode.............. Link to comment https://www.insanelymac.com/forum/topic/151791-ideneb-v14-1056-released/page/5/#findComment-1081970 Share on other sites More sharing options...
DeDDi Posted February 16, 2009 Share Posted February 16, 2009 I'm just wondering, does this actually work on my system? Abit IP35 PRO XE with Intel P35 chipset Intel core2duo E8500 SATA dvd burner/reader SATA Hard drives... Anyone?? Amit Meena have u tryed the flag cpus=1?? Last time I installed I needed to use -v -f cpus=1 Link to comment https://www.insanelymac.com/forum/topic/151791-ideneb-v14-1056-released/page/5/#findComment-1082083 Share on other sites More sharing options...
deven_suicidal Posted February 16, 2009 Share Posted February 16, 2009 i think yes....first try, if you have an error post here for help... try to change kernel.... hi i can't install, it dosen't recognize my disk:( srry for the bad quality of pic Link to comment https://www.insanelymac.com/forum/topic/151791-ideneb-v14-1056-released/page/5/#findComment-1082316 Share on other sites More sharing options...
Amit Meena Posted February 16, 2009 Share Posted February 16, 2009 I'm just wondering, does this actually work on my system? Abit IP35 PRO XE with Intel P35 chipset Intel core2duo E8500 SATA dvd burner/reader SATA Hard drives... Anyone?? Amit Meena have u tryed the flag cpus=1?? Last time I installed I needed to use -v -f cpus=1 i think your hardware is perfect and ya i used flag cpus=1 i also used 2-3 kernels but not a single one worked.....now i'm going to try with not selecting a kernel........ Link to comment https://www.insanelymac.com/forum/topic/151791-ideneb-v14-1056-released/page/5/#findComment-1082325 Share on other sites More sharing options...
Cris900 Posted February 16, 2009 Share Posted February 16, 2009 hello mac pros...... today i finished my ideneb v1.4 leopard 10.5.2 download and installed it on my PC........and it installed perfectly.......but after the whole installation when i restarted my PC i got that reboot error than i booted mac in verbose mode and got that error(displayed in pic).......... it was also showing 64bit enabled but i'm working on 32 bit......... can someone please help me.........i selected sleep kernal...... hey friends i got this problem fixed by changing kernal............but i got new problem......... here is it what i got when i booted in verbose mode............ that was from normal mode.............. have you select correct chipset during installation? Link to comment https://www.insanelymac.com/forum/topic/151791-ideneb-v14-1056-released/page/5/#findComment-1082374 Share on other sites More sharing options...
Recommended Posts