Defender666 Posted February 22, 2007 Share Posted February 22, 2007 This may be a bit numb, and or redundant, but I'm sitting over here on Camp Arifjan in Kuwait and we don't have a whole lot to do at the moment. I've been trying to get my Shuttle SN85G4V2 with an AMD A64 3000+ (Yes, I know old and slow -- but we're Army, what do you expect) running in OSX. For those unaware of this particular system it is NForce3 based. After quite a bit of swearing, cussing, and threats of a 3 round burst from my rifle I've managed to get this far; forcedeth: Initializing. forcedeth: Probing. forcedeth: WARNING - your nVidia device 0x10DE:0x00D6 is not known to work, but it could be supported in the future. Please contact the coder forcedeth: Starting. forcedeth: PCI system 0x10DE:0x00D6, subsystem 0x1297:0xA550 opened. forcedeth: Allocated 2072 bytes of contiguous memory for DMA: rx at 0x29714000, tx at 0x29714400, wired at 0x13824000. forcedeth: Found nForce4 LAN with MAC: 00:30:18:b4:85:b8. forcedeth: Found PHY 0x0000:0x0028 at address 1. com_triton_forcedeth: Ethernet address 00:30:1b:b4:05:b8 forcedeth: Enabling... 1 2 3 4 5 6 7 forcedeth: Starting transmit/receive engines forcedeth: Network link down. forcedeth: Link speed now 100Mbps, code 0x10064 forcedeth: Received irq with events 0x30. Probably TX fail. forcedeth: Received irq with events 0xx. Probably TX fail. ... And it continues to throw random event numbers and failing. Not sure what the hell this means, but it's closer than I've gotten yet. In order to get this far I pulled the 0x00D610DE out of windows device manager and threw it in the Info.plist file. Apparently I'm lame though and it doesn't work. If anyone has any suggestions I'll buy you a beer when I get out of this hellhole. Until then, Thanks, Dan I have nearly the same system. Nforce3 SN85G4 Athon64 3200 I got also that far by changing the Vendor/Device ID thing. Please help us!! Feb 22 12:03:23 jerrys-computer kernel[0]: MMAC: family specific matching fails Feb 22 12:03:23 jerrys-computer kernel[0]: forcedeth: Initializing. Feb 22 12:03:23 jerrys-computer kernel[0]: forcedeth: Probing. Feb 22 12:03:23 jerrys-computer kernel[0]: forcedeth: WARNING - your nVidia device 0x10DE:0x00D6 is not known to work, but it could be supported in the future. Please contact the coder. Continuing anyway... Feb 22 12:03:23 jerrys-computer kernel[0]: forcedeth: Starting. Feb 22 12:03:23 jerrys-computer kernel[0]: forcedeth: PCI system 0x10DE:0x00D6, subsystem 0x1297:0xA550 opened. Feb 22 12:03:23 jerrys-computer kernel[0]: forcedeth: Mapped from 0xEC000000 of length 4096. Feb 22 12:03:23 jerrys-computer kernel[0]: forcedeth: Allocated 3072 bytes of contiguous memory for DMA: rx at 0x2a495000, tx at 0x2a495400, wired at 0x114ff000. Feb 22 12:03:23 jerrys-computer kernel[0]: forcedeth: Found nForce4 LAN with MAC: 00:30:1B:B0:F3:A5. Feb 22 12:03:23 jerrys-computer kernel[0]: forcedeth: Found PHY 0x0000:0x0020 at address 1. Feb 22 12:03:24 jerrys-computer kernel[0]: com_triton_forcedeth: Ethernet address 00:30:1b:b0:f3:a5 Feb 22 12:03:24 jerrys-computer kernel[0]: forcedeth: Enabling... 1 2 3 4 5 6 7 Feb 22 12:03:24 jerrys-computer kernel[0]: forcedeth: Starting transmit/receive engines Feb 22 12:03:24 jerrys-computer kernel[0]: forcedeth: Network link down. Feb 22 12:03:24 jerrys-computer kernel[0]: forcedeth: Received irq with events 0x8. Probably TX fail. Feb 22 12:03:25 jerrys-computer kernel[0]: forcedeth: Link speed now 100Mbps, code 0x10064. Feb 22 12:03:25 jerrys-computer kernel[0]: forcedeth: Received irq with events 0x8. Probably TX fail. Feb 22 12:03:25 jerrys-computer kernel[0]: forcedeth: Received irq with events 0x8. Probably TX fail. Feb 22 12:03:25 jerrys-computer kernel[0]: forcedeth: Received irq with events 0x28. Probably TX fail. Feb 22 12:03:25 jerrys-computer kernel[0]: forcedeth: Received irq with events 0x28. Probably TX fail. Feb 22 12:03:25 jerrys-computer kernel[0]: forcedeth: Received irq with events 0x8. Probably TX fail. Feb 22 12:03:25 jerrys-computer kernel[0]: forcedeth: Received irq with events 0x28. Probably TX fail. Feb 22 12:03:25 jerrys-computer launchd: Server 5147 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[285]: exited abnormally: Hangup Feb 22 12:03:25 jerrys-computer kernel[0]: forcedeth: Received irq with events 0x28. Probably TX fail. Feb 22 12:03:25 jerrys-computer kernel[0]: forcedeth: Received irq with events 0x28. Link to comment Share on other sites More sharing options...
htakada Posted February 23, 2007 Share Posted February 23, 2007 Hello, I installed osx 10.4.6 on a M2N Deluxe, traied to load de forcedeth driver but it "says" that it is already loaded, how do I unload the driver that comes with 10.4.6 and load the one downloaded from this site ?? thanks Hugo Link to comment Share on other sites More sharing options...
Envying Posted February 26, 2007 Share Posted February 26, 2007 I have an onboard Nforce 4 Lan, will give it a try. Link to comment Share on other sites More sharing options...
~Andru~ Posted February 27, 2007 Share Posted February 27, 2007 After about 4 hours of trying the different kext packages I finally got it working on my ASUS A8N-VM. I used the kext package that I will attach, with the -nockd kext. Thank you for all your hardwork!forcedeth6100.zip I am using the version that he attached and whenever I load it I just get this repeated over and over again kernel[0]: forcedeth: packet 80000000 - 8000062e Link to comment Share on other sites More sharing options...
Envying Posted February 27, 2007 Share Posted February 27, 2007 Actually my Lan is Nforce 650i SLI, is there anybody ever tried this driver under Nforce 6? I will follow the instruction and try it out tonight again. Thanks in advance. Link to comment Share on other sites More sharing options...
~Andru~ Posted February 28, 2007 Share Posted February 28, 2007 my nforce4 lan didn't work with the older versions of the nforce driver on linux, I had to upgrade to a newer kernel to get everything to work. If it was possible could you merge in all the changes from the nforce driver into your driver? Link to comment Share on other sites More sharing options...
Envying Posted March 1, 2007 Share Posted March 1, 2007 Here is the message after I enter DMESG, Could you please give me some idea why my card is still not working, even though the driver figured out correct physical MAC address. forcedeth: Initializing. forcedeth: Probing. forcedeth: WARNING - your nVidia device 0x10DE:0x0269 is not known to work, but it could be supported in the future. Please contact the coder. Continuing anyway... forcedeth: Starting. forcedeth: PCI system 0x10DE:0x0269, subsystem 0x1043:0x8221 opened. forcedeth: Mapped from 0xFE02B000 of length 4096. forcedeth: Allocated 3072 bytes of contiguous memory for DMA: rx at 0x3cb73000, tx at 0x3cb73400, wired at 0xaa0000. forcedeth: Found nForce4 LAN with MAC: 00:1A:92:24:A4:CF. forcedeth: Found PHY 0x5040:0x0003 at address 1. forcedeth: Enabling... 1 2 3 4 5 6 7 forcedeth: Starting transmit/receive engines forcedeth: Network link down. Link to comment Share on other sites More sharing options...
~Andru~ Posted March 2, 2007 Share Posted March 2, 2007 Here is the message after I enter DMESG, Could you please give me some idea why my card is still not working, even though the driver figured out correct physical MAC address. forcedeth: Initializing. forcedeth: Probing. forcedeth: WARNING - your nVidia device 0x10DE:0x0269 is not known to work, but it could be supported in the future. Please contact the coder. Continuing anyway... forcedeth: Starting. forcedeth: PCI system 0x10DE:0x0269, subsystem 0x1043:0x8221 opened. forcedeth: Mapped from 0xFE02B000 of length 4096. forcedeth: Allocated 3072 bytes of contiguous memory for DMA: rx at 0x3cb73000, tx at 0x3cb73400, wired at 0xaa0000. forcedeth: Found nForce4 LAN with MAC: 00:1A:92:24:A4:CF. forcedeth: Found PHY 0x5040:0x0003 at address 1. forcedeth: Enabling... 1 2 3 4 5 6 7 forcedeth: Starting transmit/receive engines forcedeth: Network link down. I get that error as well, I have tried all the different drivers, from this thread Link to comment Share on other sites More sharing options...
crucky Posted March 3, 2007 Share Posted March 3, 2007 I also cant get my ASUS P5N-E SLI Ethernet to work when anybody has the right drivers or a tutorial pls let me know ! Link to comment Share on other sites More sharing options...
Ulrik N.O. Posted March 7, 2007 Share Posted March 7, 2007 thanks Link to comment Share on other sites More sharing options...
Vipersfate Posted March 12, 2007 Share Posted March 12, 2007 (edited) So it seems we are having the same error. I wonder if anyone has fixed that and has neglected to tell us lol I'm sitting here thinking "You've gotta be kidding me" I have 3 routers sitting in my room so I can test the ethernet. After continuous browsing, it eventually connects! WTF? OK, what I did, is in EVERY plist file, I change the 0057 to the 0269. I don't care if it was my vendor ID or not. But its working Biostar 6100-M9 Motherboard nForce MCP51 Chipset (Nforce 4) But I cant connect to the router that it's connected to (the GUI of it) Hrm...getting closer Edited March 12, 2007 by Vipersfate Link to comment Share on other sites More sharing options...
Silthrim Posted March 16, 2007 Share Posted March 16, 2007 I can't get my LAN to work either. I have an EVGA 680i SLI nForce motherboard with Dual Gigabit ethernet. Any ideas? Link to comment Share on other sites More sharing options...
etom Posted March 19, 2007 Share Posted March 19, 2007 Thank you vercy much Link to comment Share on other sites More sharing options...
iMotor Posted March 20, 2007 Share Posted March 20, 2007 Hey Planetbeing, thanks you for work on forcedeth. However still problems with nForce 430 chipset (Marvell 88e1111/88e1115). Is there possibility to make driver for Mac from *BSD or Linux system? If it exists - can you provide some links how to do this. I really want Mac OS on my x86 and I ready for work on porting newest version of driver from different OS. Link to comment Share on other sites More sharing options...
linuxkid Posted March 23, 2007 Share Posted March 23, 2007 Worked like a charm, first try. Many thanks PlanetBeing. Gigabyte K8N Pro SLI (posting this from safari, w00t!) Link to comment Share on other sites More sharing options...
12490473 Posted March 24, 2007 Share Posted March 24, 2007 Thans!!!!!!!!!!!! Thanks!!!!!master!!!!!haha!!!!! Link to comment Share on other sites More sharing options...
HUBO Posted March 26, 2007 Share Posted March 26, 2007 I use Abit KN9 Ultra main board. It has 2 lan port and I install JaS Mac OS X 10.4.8 ppf1. I think this version already has forcedeth.kext because when I boot with -v option, it show following message. Mar 27 03:29:55 jungho-lees-computer kernel[0]: MAC1: family specific matching fails Mar 27 03:29:55 jungho-lees-computer kernel[0]: forcedeth: Initializing. Mar 27 03:29:55 jungho-lees-computer kernel[0]: forcedeth: Probing. Mar 27 03:29:55 jungho-lees-computer kernel[0]: forcedeth: WARNING - your nVidia device 0x10DE:0x0373 is not known to work. Continuing anyway... Mar 27 03:29:55 jungho-lees-computer kernel[0]: forcedeth: Starting. Mar 27 03:29:55 jungho-lees-computer kernel[0]: forcedeth: PCI system 0x10DE:0x0373, subsystem 0x147B:0x1C24 opened. Mar 27 03:29:55 jungho-lees-computer kernel[0]: forcedeth: Mapped from 0xFE02A000 of length 4096. Mar 27 03:29:55 jungho-lees-computer kernel[0]: forcedeth: Allocated 3072 bytes of contiguous memory for DMA: rx at 0x23d60000, tx at 0x23d60400, wired at 0x13e65000. Mar 27 03:29:55 jungho-lees-computer kernel[0]: forcedeth: Found nForce4 LAN with MAC: 00:50:8D:93:B5:9A. Mar 27 03:29:55 jungho-lees-computer kernel[0]: forcedeth: Found PHY 0x5040:0x0003 at address 1. Mar 27 03:29:55 jungho-lees-computer kernel[0]: com_triton_forcedeth: Ethernet address 00:50:8d:93:b5:9a Mar 27 03:29:55 jungho-lees-computer kernel[0]: forcedeth: Enabling... 1 2 3 4 5 6 7 Mar 27 03:29:55 jungho-lees-computer kernel[0]: forcedeth: Starting transmit/receive engines Mar 27 03:29:55 jungho-lees-computer kernel[0]: forcedeth: Network link down. I think forcedeth.kext doesn't support KN9-ultra network hardware. How can I solve this problem..? HCL 10.4.8 shows this mainboard is perfect, but I can't solve network problem. Please help me..!! Link to comment Share on other sites More sharing options...
stevetheman Posted March 27, 2007 Share Posted March 27, 2007 has anyone found a solution for this network link down problem yet? Link to comment Share on other sites More sharing options...
Vipersfate Posted March 27, 2007 Share Posted March 27, 2007 Well, after goofing with too many things, the thing just stopped working. What I did was reinstall the complete OS. Make sure that you enter the commands exactly as written! I goofed up each time I did it. Working late into the night makes it hard to type well. I got it to work, although it does get a bit picky. Some times it works, but on a reboot it won't. Link to comment Share on other sites More sharing options...
jethro1138 Posted April 1, 2007 Share Posted April 1, 2007 Well, I'm new to all this... I've got 10.4.1 on here so, no network. So I can't upgrade to 10.4.5 which apparently is what forcedeth wants othewise you get that superclass error. I've seen a post suggesting rebuilding forcedeth on my own computer. And I'll be happy to, if someone tells me, er. How to do it. When I load the project file into xcode, xcode has no idea what to do with it... How do I rebuild forcedeth? Or has someone found some other way of doing this? Link to comment Share on other sites More sharing options...
AndyHughes Posted April 3, 2007 Share Posted April 3, 2007 Looks like alot of people are having the same issues as me. I am getting the "Network link down" message and then it just stays there, no lights on the back of the nick. I am using 10.4.8 JaS and have an Asus M2N-E. I'll watch this topic just in case anything happens and will keep trying. Its the only nic I own that will work with it. Link to comment Share on other sites More sharing options...
mjb10000 Posted April 3, 2007 Share Posted April 3, 2007 Cheers - worked first time on my AMD machine. Safari took me to apple.com and suddenly I felt a whole lot better for having taken the effort to install Tiger. Thanks again, it's much appreciated. Link to comment Share on other sites More sharing options...
snowsquirrel Posted April 9, 2007 Share Posted April 9, 2007 I have an MSI k9n board, and I get the same message regarding the onboard lan: 0x10DE:0x0373 known not to work... Yet according to osx86 wiki's HCL for 10.4.8, it appears that some people have it working. Is there something else I should be trying? I am using the AMD dvd, which came with forcedeth. Is there a newer version of forcedeth I could try? ~S Link to comment Share on other sites More sharing options...
teh.moebius Posted April 9, 2007 Share Posted April 9, 2007 Could someone confirm my Device Id for me from the attached image. I've tried 0x0026910DE but I get Network link down with forcedeth and with forcedeth-nockd I get loads of packet messages but I still can't connect to the Internet. The mobo I'm using is a ASRock K8NF4G-VSTA nForce MCP 410/430. Link to comment Share on other sites More sharing options...
teh.moebius Posted April 10, 2007 Share Posted April 10, 2007 I need help with getting my Ethernet working properly. I believe I can get it working with forcedeth-nockd.kext, everytime I try it it picks up Network Settings picks up the Built-in Ethernet and Network Settings but not ISP or Internet. Link to comment Share on other sites More sharing options...
Recommended Posts