Jump to content

LawlessPPC-Leo-10.5.4-Phenom&AMD


246 posts in this topic

Recommended Posts

Hey Guys

 

I have been trying to install Mac OS X since i bought my computer... With this release i was able to get through the "waiting for root device" error but i cant get past the apple logo when OS X is booting.

 

If i use the -v and -x flags, it works successfully, and ive tried to change the kexts to find out the source of the problem but i still get the blue screen when i try to boot into OSX.

 

My specs are:

Motherboard: GA-MA790X-DS4 (SB600 southbridge)

Graphics card: Sapphire 3870 GDDR4 1GB

HDs- 100GB and 80GBs (both IDE)

DVD drive- ASUS SATA Drive

Wireless Card- Linksys WMP54G- not Working

Audio- AC889- not working

 

Thanks in advance :D

Link to comment
Share on other sites

Hopefully This Will Work On My System Please Tell Me Because All Other Versions Of "AMD Compatible OS X Leopard" Don't:

 

CPU: AMD Phenom 9600 x4 2.3 Ghz

Graphics Card: Nvidia 8800 GTS 320 Mb PCIE Supercharged

System Case: Antec 900 Advanced Gaming Case

MOBO: ASUS M3N78-EMH HDMI

HDD: 160 WD Caviar Internal EIDE

Wireless: Encore ENLWI-G2

Card Reader: Manhattan Multimedia Card Reader/Writer

Monitor: 26" Samsung TV

Optical Drive: OEM Internal Sata CD/DVD+RW With Lightscribe

OS': Microsoft Windows XP Home SP3, NTFS File System

RAM: 2Gb (1 x 2gb) DDR2 - 800

 

Thanks In Advance ;)

 

PS: Could you tell me anything i should do in setup like cpu=1 or -x -v or Something in the setup menu and stuff because i am so confused, LawlessPPC could you email me a set of instructions or something please? droideka214@bellsouth.net

 

Thanks Again :D

 

 

 

Phenom9600

 

l8rs

Link to comment
Share on other sites

Installed successful on my system (had to add my dev id's for my 6800xt however):

AMD x2 3800+

GIGABYTE GA-M51GM-S2G

3 GIGs

 

~What does not work (has never worked really...):

6 port sound (only single output).

Built in Ethernet

 

Thank you Lawless & Zephyroth for a near perfect install.

 

BTW, could some one give me advise on how to get all channels on my audio working? i use ACL883. Also i would like to find out why my onboard ethernet is not working. I have a feeling there may be some modifications i need to make to some kext files but i would like a 100% working system. Also, i installed the system on 3 GB's memory at 677, now if i remove one of the non paired memory modules the mghz is then changed to 800, but i get a kernel panic when running the system like this, is there away around this or would i have to install the system when the memory is running at 800mhz?

 

BTWx2: I use "idlehalt=0" under the 'kernel flag' to get rid of the mouse lag which would usually present itself after a few hours. Also this fixed the random crashing of my apps and the -10810 error i would receive. > http://wiki.osx86project.org/wiki/index.php/Tips_And_Tricks

Link to comment
Share on other sites

@ LawlessPPC

 

This is what i get when i'm using -v -f ( Have'nt removed the kext yet ).

 

rkqzup.jpg

 

I had this same issue when i tried Lawless for the first time and i was pissed. But i tried it again on secondary drive, possibly after making some changes to the bios and it worked. Tried again on main drive and it worked. Its been working fine ever since i have used the disc a few times to install on the system. Its possibly its strictly related to a setting in the bios. I would set your bios to default maybe and enable only what is needed? Dont know honestly.

Link to comment
Share on other sites

Hello!

 

After ideneb won't working correctly for me, i will try LawlessPPC, but i got some questions.

 

How about updating LawlessPPC? Can i Update to 10.5.5 without problems? Or is there something i should know?

Or Can i Update iTunes? or iPhoto?

 

edit:

System successfull installed, but Problems with Shutdown? If i shutdown the Computer i get the Mac "Blue Screen".

How to solve this problem?

 

 

Greets

Link to comment
Share on other sites

Installed succesful. Thnx! All works fine! (but i have add AppleOnboardPCATA and change AppleVIAATA in .mkext on DVD< because have before @still waiting for root device@ error while boot from DVD for install)

AMD64 X2 6000+

ASUS M3A (AMD700+SB600)

SATA HD Seagate 500gb

Link to comment
Share on other sites

K first off i hope Lawless u can help me out with my problem.....i have spent the whole day on this site reading and re-reading trying to get a fix of the problem with my installation

The problem lies with pre-installation of the mac-os-x. It shows "Still waiting for boot Device"

I have a clean burn with verified by Nero. Burnt at 4x speed.

1)Their is no problem with the CD or the detecting of the startup installation.

2) it starts with the whole process of instalation but stops at something liek UUID: USBF: soemthing like that and then goes to the "Still waiting for boot device".

Now for my hardware whyit might now be functioning.

i have

 

((((((((((((((Processors Map

------------------------------------------------------------------------------------

 

Number of processors 1

Number of threads 4

 

Processor 0

-- Core 0

-- Thread 0

-- Core 1

-- Thread 0

-- Core 2

-- Thread 0

-- Core 3

-- Thread 0

 

 

Processors Information

------------------------------------------------------------------------------------

 

Processor 1 (ID = 0)

Number of cores 4 (max 4)

Number of threads 4 (max 4)

Name AMD Phenom X4 9550

Codename Agena

Specification AMD Phenom 9550 Quad-Core Processor

Package Socket AM2+ (940)

CPUID F.2.3

Extended CPUID 10.2

Brand ID 10

Core Stepping DR-B3

Technology 65 nm

Core Speed 1100.1 MHz (5.5 x 200.0 MHz)

HT Link speed 1800.2 MHz

Stock frequency 2200 MHz

Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, SSE4A, x86-64

L1 Data cache 4 x 64 KBytes, 2-way set associative, 64-byte line size

L1 Instruction cache 4 x 64 KBytes, 2-way set associative, 64-byte line size

L2 cache 4 x 512 KBytes, 16-way set associative, 64-byte line size

L3 cache 2 MBytes, 32-way set associative, 64-byte line size

FID/VID Control yes

FID range 5.0x - 11.0x

max VID 1.250 V

Features XD, VT

Package Type 0x1

Model 95

String 1 0x2

String 2 0x3

Page 0x0

Attached device PCI device at bus 0, device 24, function 0

Attached device PCI device at bus 0, device 24, function 1

Attached device PCI device at bus 0, device 24, function 2

Attached device PCI device at bus 0, device 24, function 3

Attached device PCI device at bus 0, device 24, function 4

 

 

Thread dumps

------------------------------------------------------------------------------------

 

CPU Thread 0

APIC ID 0

Topology Processor ID 0, Core ID 0, Thread ID 0

Type 02004001h

Max CPUID level 00000005h

Max CPUID ext. level 8000001Ah

 

 

Cache descriptor Level 1 I 64 KB 1 thread(s)

Cache descriptor Level 1 D 64 KB 1 thread(s)

Cache descriptor Level 2 U 512 KB 1 thread(s)

Cache descriptor Level 3 U 2 MB 4 thread(s)

 

 

CPU Thread 1

APIC ID 1

Topology Processor ID 0, Core ID 1, Thread ID 0

Type 02004001h

Max CPUID level 00000005h

Max CPUID ext. level 8000001Ah

 

 

Cache descriptor Level 1 I 64 KB 1 thread(s)

Cache descriptor Level 1 D 64 KB 1 thread(s)

Cache descriptor Level 2 U 512 KB 1 thread(s)

Cache descriptor Level 3 U 2 MB 4 thread(s)

 

CPU Thread 2

APIC ID 2

Topology Processor ID 0, Core ID 2, Thread ID 0

Type 02004001h

Max CPUID level 00000005h

Max CPUID ext. level 8000001Ah

 

 

Cache descriptor Level 1 I 64 KB 1 thread(s)

Cache descriptor Level 1 D 64 KB 1 thread(s)

Cache descriptor Level 2 U 512 KB 1 thread(s)

Cache descriptor Level 3 U 2 MB 4 thread(s)

 

 

CPU Thread 3

APIC ID 3

Topology Processor ID 0, Core ID 3, Thread ID 0

Type 02004001h

Max CPUID level 00000005h

Max CPUID ext. level 8000001Ah

 

Cache descriptor Level 1 I 64 KB 1 thread(s)

Cache descriptor Level 1 D 64 KB 1 thread(s)

Cache descriptor Level 2 U 512 KB 1 thread(s)

Cache descriptor Level 3 U 2 MB 4 thread(s)

 

 

Chipset

------------------------------------------------------------------------------

 

Northbridge NVIDIA GeForce 8200 rev. A2

Southbridge NVIDIA ID075C rev. A2

Memory Type DDR2

Memory Size 3072 MBytes

Channels Dual (Unganged)

Memory Frequency 333.4 MHz (3:5)

CAS# 5.0

RAS# to CAS# 5

RAS# Precharge 5

Cycle Time (tRAS) 15

Bank Cycle Time (tRC) 20

Command Rate 2T

NB Frequency 1800.2 MHz

 

 

Memory SPD

------------------------------------------------------------------------------

 

DIMM #1

 

General

Memory type DDR2

Module format Regular UDIMM

Manufacturer (ID) Transcend Information (7F4F000000000000)

Size 2048 MBytes

Max bandwidth PC2-6400 (400 MHz)

Part number JM800QLU-2G

Serial number 0007CB84

Manufacturing date Week 29/Year 08

 

Attributes

Number of banks 2

Data width 64 bits

Correction None

Nominal Voltage 1.80 Volts

EPP no

XMP no

 

Timings table

Frequency (MHz) 200 266 400

CAS# 3.0 4.0 5.0

RAS# to CAS# delay 3 4 5

RAS# Precharge 3 4 5

TRAS 9 12 18

TRC 12 16 23

 

DIMM #2

 

General

Memory type DDR2

Module format Regular UDIMM

Manufacturer (ID) Hyundai Electronics (AD00000000000000)

Size 1024 MBytes

Max bandwidth PC2-5300 (333 MHz)

Part number HYMP512U64CP8-Y5

Serial number 0000200B

Manufacturing date Week 45/Year 07

 

Attributes

Number of banks 2

Data width 64 bits

Correction None

Nominal Voltage 1.80 Volts

EPP no

XMP no

 

Timings table

Frequency (MHz) 200 266 333

CAS# 3.0 4.0 5.0

RAS# to CAS# delay 3 4 5

RAS# Precharge 3 4 5

TRAS 9 12 15

TRC 12 16 20

 

 

Monitoring

------------------------------------------------------------------------------

 

Mainboard Model M3N78-VM (0x20D - 0xAECC86)

 

LPCIO

-----------------------------------------------------

Vendor ITE

Model IT8712

Vendor ID 0x90

Chip ID 0x8712

Revision ID 0x8

Config Mode I/O address 0x2E

PCI Device List

------------------------------------------------------------------------------

 

RAM Memory Controller

bus 0 (0x00), device 0 (0x00), function 0 (0x00)

Common header

Vendor ID 0x10DE

Model ID 0x0754

Revision ID 0xA2

PI 0x00

SubClass 0x00

BaseClass 0x05

Cache Line 0x00

Latency 0x00

Header 0x00

PCI header

Subvendor ID 0x1043

Subsystem ID 0x82F2

Int. Line 0x00

Int. Pin 0x00

Capabilities

HyperTransport Capability

Offset 94h

Interface type Gen3

HyperTransport Capability

Offset 60h

Interface type Retry Mode

HyperTransport Capability

Offset 44h

Revision 3.00

Interface type Slave/Primary

Link 0 width (in/out) 16 bits/16 bits

Link 0 frequency 1800MHz

Link 1 width (in/out) 8 bits/8 bits

Link 1 frequency 200MHz

HyperTransport Capability

Offset D0h

Interface type Power Management)))))))))))

 

 

 

The problem like i told u was that i just not able to install Mac at all...gets stuck on that screen even after pressing all -v -f -x options also. Just installed it on an intel ACER 5920 Laptop and runned sucessfully but not on the Phenom. Please give some sort of an guide because we are noobs but can understand english and have got so far with the installation. by the reading i have done i could understand that because i have the hardisk and the cd-rom both on the IDE drives i am not able to find and run both together but then i dont have anyother way. Cant afford to buy a sata rom drive now. is their anyother way out PLz Help.

Link to comment
Share on other sites

Been few days now and no reply......I have given all the requirements for my system above can someone help me please??? Thanks.

 

Are you SURE your mobo is supported? Check HCL wiki and remeber Lawless has based this on ZEPHYROTH's v2. If it is, make sure you havnt got your DVD drive slaved to HD (or other way around). Make them on seperate IDEs as master. This caused a problem for me on my first attempt.

 

To my question: can I use this to UPDATE my Zeph 10.5.2, aka install keeping apps and settings? Or will I have to start-a-fresh?

 

-T

Link to comment
Share on other sites

K u are right and i understood that, but i have a problem here because i have only 1 IDE slot in my motherboard and hence running both the harddisk and the Cd-rom dive togehter is my only option. So this means i wont be able to install MAc on my PC unless i either get a SATA rom drive or a sata hardisk. OOOOOHHH!!!!!! Cant afford it right now. Is their another option guys for my problem. Instad of buying a whole new CD-Rom drive.

Link to comment
Share on other sites

Great release, runs the smoothest out of all that I've tried. Had to use the latest NVInject 512 to get my resolution fixed. Not tested dual monitors yet. Only other thing is my sound isn't working. I'm happy to test different drivers myself, where's a good list of the kexts to test for sound? Can't seem to find a decent list of the top ones that are out there.

 

AMD 64 X2 3800+

GeForce 7600 512MB

ECS nForce4 mobo

Link to comment
Share on other sites

Hello. I want to say something about this ISO, so

I have no problem working on my computer. :D

 

But when I use Final Cut Pro i can capture and edit

without problem, but when I want to export the

project to burn a DVD the system freezes or appears a screen that says "You need restart the system"

almost always by 10% and is editing or not. :gathering:

 

I Changed video card and nothing, and I have been reviewing, I found that the system bus speed

Data is 200 MHz, but at the manufacter´s website says

speccifies Bus like 2000 Mhz to 5200 Mhz. I´m looking for some

option to see where the system fails, Actually I don´t know if this is really the problem ...

 

this is my Pc:

 

Mother : Gigabyte GA-MA790FX-DS5

Processor: AMD Phenom 9600BE Quad-Core

Memory: 8 GB DDR2 667 Mhz Kingston

Video: Nvidia 8500GT

Hard Drives: 1 WD 320 Gb SATAII(Windows and aplications backup)

1 Seagate 320 SATAII (video and video ISO)

1 Seagate 500 SATAII (in two partitions one whit leopard and the other for video)

DVD-RW : Samsung SATA and Lite on SATA.

 

When i´m installing the OS, on the custom installation, at the zone of the chipset i select "VIA SIS MARVELL AND SB CHIPSET" only. Does i need to add or select another chipset?

 

Thanks to Everybody, any sugesstions are welcome.

Link to comment
Share on other sites

  • 4 weeks later...

Hey can anyone help me? I'm having a problem installing this. I ALWAYS get stuck at

 

Mac Framework successfully initialized

using 15073 buffer headers and 4096 cluster IO buffer headers

IOAPIC: Version 0x21 Vectors 64:87

 

My specs are

Processor: AMD Turion 64 X2 Mobile TL-60

Northbridge: ATI RS690/RS690M rev. 00

Southbridge: ATI SB600 rev. 00

Harddrive: WD2500BEVS SATA

Dvd Drive: Optiarc DVD RW AD-7560A

 

Thank you.

Link to comment
Share on other sites

somethings i know that will effect the installation of this release and others. Alot of it comes down to your hardware. Slave and master drive configs can make a huge difference. If it wont boot (install or os) with dvd as slave then try master. Bios settings have a dramatic effect on everything. The best process if you have problems is disable everything you can in the bios eg firewire on board sound etc. Then just do an install with your chipset kext. Then once you have a booting system start to add all other kexts. I am shortly going to write a bit of a guide about everything i have found about problems with bios etc. 1 thing i have found is that depending on what your bios settings are will cause the create account loop. This goes for the majority of distros not just mine.

Link to comment
Share on other sites

  • 3 weeks later...
i get to the installation screen but i dont see my Hard drive in disk utility its a SATA 160gb. any HELP

With such vague information no!!!!

 

Have you actually read the readme file. I feel a lot of ppl just avoid the readmes and any aditional information that is available.

Link to comment
Share on other sites

  • 4 weeks later...

Hi

 

i have got a similiar confuguration of you :

 

CPU:- AMD Phenom X4 9850 BE

Motherboard:- ASUS M3A78 (SB700 & AMD770)

Memory:- 3GB 800MHZ DDR2 KINGSTON

Graphix:- GEFORCE 8500 GT CAPTIVA 1gb

Internal DVDRW1: Optiarc AD-7201S 20x SATA

Internal DVDRW2: _NEC DVD ND-4551A

HHD1: Maxtor 6B160M0 SATA

HDD2: Maxtor 6Y120L0 PATA

 

Does anyone know problems with this components? Where I can find a tutorial for Phenom & AMD 10.5.4 ??

Ciao a tutti

Leeonardello

Link to comment
Share on other sites

Hi

 

i have got a similiar confuguration of you :

 

CPU:- AMD Phenom X4 9850 BE

Motherboard:- ASUS M3A78 (SB700 & AMD770)

Memory:- 3GB 800MHZ DDR2 KINGSTON

Graphix:- GEFORCE 8500 GT CAPTIVA 1gb

Internal DVDRW1: Optiarc AD-7201S 20x SATA

Internal DVDRW2: _NEC DVD ND-4551A

HHD1: Maxtor 6B160M0 SATA

HDD2: Maxtor 6Y120L0 PATA

 

Does anyone know problems with this components? Where I can find a tutorial for Phenom & AMD 10.5.4 ??

Ciao a tutti

Leeonardello

 

as far as im aware you need an sb700 kext for your chipset to make this work which you would have to add to the dvd just to install then add it to the hardrive after install all this info has been posted many times (how to add kexts etc)

Link to comment
Share on other sites

  • 2 weeks later...
np glad to help

 

 

It was a sucessfully installation but...... i have got a quadcore but only one core is operating!! What do you think about ?When i installed it used cpus=1. Probably this is the reason, but without it did'nt start installation.

 

 

Nome modello: Mac

Identificatore modello: System Product Name

Nome processore: AMD Phenom 9850 Quad-Core Processor

Velocità processore: 2.7 GHz

Numero totale di nuclei: 1

Cache L2: 512 KB

Caratteristiche CPU: FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT PSE36 CLFSH MMX FXSR SSE SSE2 HTT SSE3 MON CX16 POPCNT

Memoria: 3 GB

Velocità bus: 200 MHz

 

Ciaooooo

Link to comment
Share on other sites

 Share

×
×
  • Create New...