quetzalcoatl2435 Posted January 22, 2009 Share Posted January 22, 2009 Glad I could help. Link to comment Share on other sites More sharing options...
pringles78 Posted January 23, 2009 Share Posted January 23, 2009 hi, i'm writing from my lawlessppc with graphics driver installer and qe/ci activated i have another problem now when try to change monitor resolution i can see only a blu screen i've tried many times to shutdown during the 15 seconds but nothing happened, when restart the resolution come back to 800x600 the output of system information are: nVidia GeForce 8600 GTS: Modello Chipset: nVidia GeForce 8600 GTS Tipo: Monitor Bus: PCIe Larghezza Lane PCIe: x16 VRAM (totale): 512 MB Fornitore: NVIDIA (0x10de) ID dispositivo: 0x0400 ID revisione: 0x00a1 Revisione ROM: nVidia GeForce 8600 GTS OpenGL Engine [EFI] Monitor: Mostra connettore: Stato: Nessun monitor collegato Monitor VGA: Risoluzione: 800 x 600 @ 60 Hz Profondità: Colore 32-bit Core Image: Hardware accelerato Monitor principale: Sì Mirror: Spento Online: Sì Quartz Extreme: Supportata Rotazione: Supportata What's wrong? Thank you again for attention. "Resolved" instead to stop pc through pc button, i've tried to remove the ad-dc cable and, ta da, i have now leo at 1280x1024 Link to comment Share on other sites More sharing options...
X!X! Posted January 26, 2009 Share Posted January 26, 2009 Hello and congratulations for your work ( even i have not downloaded it yet it takes a great deal of effort and patience ) Before getting it i am wondering whether it will work on my hardware or not . CPU : Phenom 8450 VGA: 9800 Gtx+ Motherboard : M3A78 PRO ASUS 4 GB 800 mhz Xtreem Samsung dvd writer LG DVD rom 320 GB HDD sata No duel boot only this OS will be used . thank you Link to comment Share on other sites More sharing options...
ferlie Posted February 9, 2009 Share Posted February 9, 2009 anyone try this with Phenom II 940 BE? Link to comment Share on other sites More sharing options...
leeonardello Posted February 9, 2009 Share Posted February 9, 2009 Hi people! Go on - www.macrespect.com Do you think we know cirillic? Link to comment Share on other sites More sharing options...
quetzalcoatl2435 Posted February 9, 2009 Share Posted February 9, 2009 Do you think we know cirillic? Leave him be. He's been spamming every thread with that message. I'd figure the mods would do something about that very soon... Link to comment Share on other sites More sharing options...
Vishaaal Posted February 14, 2009 Share Posted February 14, 2009 Hello, I am trying to install LawlessPPC-Leo-10.5.4-Phenom&AMD on VmWare 6.5 on my DELL 1501 AMD Turion 64X2. I am getting the "Still waiting for root device" error when the installation starts. Can this be installed on VMware? Lawless did say that the problem comes from the dvd drive. But using a virtual drive, i still get this error. Even get this error while mounting the iso file directly on vmware. I have tried many iso, but got the same error. How can i get this installed? Thanks in advance guys for the great job!!! Link to comment Share on other sites More sharing options...
LawlessPPC Posted February 18, 2009 Author Share Posted February 18, 2009 Hello, I am trying to install LawlessPPC-Leo-10.5.4-Phenom&AMD on VmWare 6.5 on my DELL 1501 AMD Turion 64X2. I am getting the "Still waiting for root device" error when the installation starts. Can this be installed on VMware? Lawless did say that the problem comes from the dvd drive. But using a virtual drive, i still get this error. Even get this error while mounting the iso file directly on vmware. I have tried many iso, but got the same error. How can i get this installed? Thanks in advance guys for the great job!!! you need to find out what chipset you laptop runs then find the kext to drive it that would then need to be injected to the image before burning Link to comment Share on other sites More sharing options...
ka4*- Posted February 23, 2009 Share Posted February 23, 2009 Any Help or that relise install on my Desktop PC Setup: Amd athlon64 x2 4200+ 1gb Ram (kingston) SSE SSE2 SSE3 motherboard: AsusTek model: M2R-FVM chipset : ATI xpress 200 southbridge: ATI SB600 Video Radeon HD 4670 1gb Link to comment Share on other sites More sharing options...
ka4*- Posted February 24, 2009 Share Posted February 24, 2009 Any Help or that relise install on my Desktop PC Setup: Amd athlon64 x2 4200+ 1gb Ram (kingston) SSE SSE2 SSE3 motherboard: AsusTek model: M2R-FVM chipset : ATI xpress 200 southbridge: ATI SB600 Video Radeon HD 4670 1gb I'm installed this realise and when it starts it's alwayse restart on the Start what i need to do ?! Link to comment Share on other sites More sharing options...
kylesan Posted June 4, 2009 Share Posted June 4, 2009 i have: cpu: amd phenom 9500 quad core socket am2 mobo: asus m3a nb770 sb 600 video: Radeon hd 3850 ram 4 gigs hd: 500 gb sata hdd. I used lawless to install osx, and everything installs correctly, but it gets to the restart screen and fails to reboot. does anyone have any ideas how i could get this working? Link to comment Share on other sites More sharing options...
lynxs19 Posted August 17, 2009 Share Posted August 17, 2009 Does Lawless PPC 10.5.4 Leo Phenom&AMD have support for Nvidia graphics cards anyone know. Link to comment Share on other sites More sharing options...
lynxs19 Posted August 18, 2009 Share Posted August 18, 2009 This is where I have problems It tells me i have to restart my computer no matter if its kalyway 10.5.2 or Lawless PPC 10.5.4 Leopard I install on my PC I have a compaq presario SR5710F with a AMD Athlon 64 X2 processor, 80GB IDE HDD, 250GB Sata HDD, IDE DVD RW, Sata DVD RW, PNY Verto 9500GT, a Belkin Wireless G Plus wireless PCI Desktop adaptor, a nvidia nforce chipset, and 3GB of DDR2 RAM. Pleeeeeeeeeze Sommmmmmmebodddddddddy help me Im a noob @ this. Link to comment Share on other sites More sharing options...
lynxs19 Posted August 18, 2009 Share Posted August 18, 2009 This is where i get a problem on my other computer when i put in my 80GB IDE HDD from my compaq. In my other computer i have an AMD Athlon with either 640 or 680MB of RAM with a Diamond viper2 PCI video card and a IDE DVD RW drive and a sound blaster PCI sound card. Link to comment Share on other sites More sharing options...
fenomen1701 Posted August 19, 2009 Share Posted August 19, 2009 LawlessPPC-Leo-10.5.4-Phenom&AMD it's working MyPc Configuration Cpu=Amd Phenom X3 710 Mainboard=Dfi 790FX-M2R ULTRA (RD790+SB600) PCIX16*3 Ram=3*2gb 800mhz Ddr2 Kingston Vga=Ati 3450 (kext iso add in myself) Sound Card=Alc 888T (Pls Selected 888 6 channel No Digital Output) Full İnput+output included mic. hdd=Samsung HDD102UJ (1TeraByte) SATA Optic=Lg Dvd Rw SATA I used lawless to install osx 10.5.4 Link to comment Share on other sites More sharing options...
X-Rom Posted August 30, 2009 Share Posted August 30, 2009 Hi, I am Giuliano, Italy. I am a skilled developer & system administrator on Microsoft Windows Operating Systems... I am a newbe in the "Mac Thinking" I would try to install LawlessPPC-Leo 10.5.04 Phenom & AMD to introduce me in the Apple World and try to develop a little iPhone application using objective-C, than, of course, I would buy a MacBoock Pro Air to contiune my experience. I read a lot of forums about the topic, and sure, I've tried to install by myself on of the osx86 Iso I tried to install different ISOs (iATKOS, iDeneb, Kalyway and finally Lawless) in different ways different PCs different CPUs different RAM different VGA different HD different DVD Units different keyboard and mouse But no luck on my way... It always happends something wrong: the install finishes but can't boot the distro reboots at the darwin bootloader can't see the hard drive panic error install freezes on language selection window install can't recognize mouse (keyboard worked but only one time...) and other strange things I can't remember So finally I decide to ask help directly to the community. I decide to be as clear as possible because I read a lot about the topic and I learned that It is much important to be clear explaining the situation. I am sorry if my english Is not much good, I always make some mistakes. Here we go: Using my windows pc... I've downloaded the iso File name: LawlessPPC-Leo-10.5.4-Phenom&AMD.iso MD5 checksum: 2b88542b49f0680e40cbcb7280314c33 [*] i've burned the iso using: Software: Ultra ISO Premium 9.1.2.2465 DVD Recorder: Pioneer DVD-RW DVR-216D (SATA interface) DVD Recordable Media: TDK ("life on record") DVD-R (1-16x Speed) 4.7 GB Write Speed: 4x (5.540 Kb/s), the slowest in the dropdown list of burn speeds Write Method: DAO (Disc At Once) I would try to install Lawless iso into my AMD Pc, bought and assembled by me in summer 2008. Chasis : Coller Master Centurion 590 Take a look here PSU : EZCOOL NEW 600W - Ver. 2.2 Take a look here (Sorry only italian link for this PSU) 24p(4+4) 4xSata - 2 Pci-e 6p 8p - 14cm Fan Silent, Energy-Efficient Motherboard : ASUS M3A78 Pro Rev 1.00G / Chipset: AMD 780G/SB700 Take a look here CPU : AMD Phenom X4 9950 "Black Edition" (2.6GHz / 140W) Take a look here Cooler : Thermaltake TMGA2 Take a look here RAM : 2GB (2x1GB) Elite Team DDR II 800 Mhz CL=5-5-5-15, Model TEDD1024M800HC5 Take a look here plugged in dual channel configuration. Vga : ATI Radeon HD 3650, 512 Mb GDDR3 SDRAM, HDTV Out Take a look here DVD : 2 x Pioneer DVD-RW DVR-216D (SATA interface) Take a look here Plugged on SATA Channels 4 (Set as First Boot Device) and 6 HDD : Western Digital Caviar Blue SATA HD, 3Gb/s - 500GB - 8 MB Cache - 7200 RPM Take a look here Plugged on SATA Channel 1 Keyb & Mouse : Note i use a KVM switch Corega Changer (Model MiNi18) Take a look here (this is an old product I can't find it in producer site) to use same monitor, mouse and keybord for two PCs (I hit CTRL twice to switch from one to another PC) but i've tried with no luck using microsoft wireless keyboard and mouse too... I didn't try to use normal PS/2 keyboard and mouse because now I haven't... Important BIOS Setting I think to tell you: USB Legacy is Enable SATA is Enable SATA Type is AHCI SATA RAID is disabled DVDs and HD are on different SATA channel DVD is the first bootable device HD is the second bootable device I read in forums about some "Kext files", "kernel version", "boot options" and (if I have understanded well) Kext file may be used during darwin boot and / or selected during the installation procedure (configuration). I don't know how to configure the Iso to use the correct kext files and / or the correct kernel version at boot time and not sure about the correct boot options to use. First, I ask you if you may tell me a link to find a basic tutorial about modifing the Iso so I try by myself to make a correct iso to install in my AMD Second, I write now the main problem i have installing: Once i booted darwin with the -v option (if i not use -v option i get a grey screen with a beautiful bitten gray apple in the center) follows many lines that apparently tells me that Is is all ok.. except for some kind of outputs like OHCI Controller will be unloaded across sleep ApplePS2Keyboard: Unexpected Acknowledge from PS/2 Controller CODE Signing: CS_INVALID_PAGE P=41 [configd] Clearing CS_VALID mDsnResponder [48] cannot contact helper getHelper_Port mDsnDynamicStoreSetConfig Mach Comunication Failed ICPISend Invalid destination port could this lines tell me where is the problem ? After follow the graphic part of the install where I see the window asks for language selection but the PC is freezed, mouse and keyboard doesn't work. So i have to switch off the PC from the PSU because the switch power button doesn't work. During the many installation I tried sometimes happend that the install stops showing "debug kernel panic" and in the detail stack something telling like the cause was in the PS/2 Controller. Now I am currently trying different bios setting... and different boot options using always mach_kernel ... I Hope in your help Regards Giuliano. Link to comment Share on other sites More sharing options...
X-Rom Posted August 30, 2009 Share Posted August 30, 2009 Hi Had no luck with Bios setting so I searched again and found this topic http://www.insanelymac.com/forum/lofiversi...hp/t114378.html When installation was freezed I unplug my ps/2 KVM mouse and keyboard connectors, plugged them into a PS2 To USB converter cable and then plugged the usb cable, in less than 1 minutes i was able to proceed now I am going to install !!! I will tell you the rest of the story. Bye Link to comment Share on other sites More sharing options...
X-Rom Posted August 31, 2009 Share Posted August 31, 2009 Hi, I've done the install without specify any third kext but i got some problems. After reboot i see a screen with corrupted image and can't operate, I think the OS X is installed but i can't get the screen. then i reinstall choosing the ATI RADEON 3650 KEXTS from third-party software and choose ntfs and fat32 too. the install completed but i get blue flash and then black screen no signal to the monitor.. i looked for install correct ATI RADEON 3650 KEXTS http://www.insanelymac.com/forum/index.php?showtopic=107526 i donì't know if they are the same kext i can find personalizing the leopard install selecting ATI RADEON HD 3650 under third-party software i have downloaded and stored in a flash usb drive that mounts perfectly when i plug into the usb during the install procedue. i can use terminal to browse the files stored in the pen drive. but i can figure out how to tell the installer to use the pkg file at the install of Leopard to use the kexts. I looked for guiedes and or instruction, some tells to use the utility Kext Helper 7b, i have downloaded it and stored into the usb pen drive but i don't know how get it to run by terminal (is terminal the only way i have to start commands and apps before install leopard ?) sudo doesn't work in the terminal window. it says "command not found" HELP me, please. Giuliano. Link to comment Share on other sites More sharing options...
Crash! Posted August 31, 2009 Share Posted August 31, 2009 Use this guide to modify your DVD. Modify Installation DVD Link to comment Share on other sites More sharing options...
X-Rom Posted August 31, 2009 Share Posted August 31, 2009 Use this guide to modify your DVD. Modify Installation DVD Hi Crash! i've readed the post but i have a pkg file not single kext file, ito the pkg file i've expanded using the command pkgutil --expand there isn't any kext file... and into the pkg file there are some other files like an install package. i don't have a mac install to help me, i can only use the terminal app. i'm trying now McDrive for windows that may help me to open a mac disc into windows and to burn a modified mac disc... see you soon. Thanks. Giuliano Link to comment Share on other sites More sharing options...
X-Rom Posted August 31, 2009 Share Posted August 31, 2009 Hi, i can read (and maybe write) a mac disc using windows I post the image that shows the contet of the ATI package and the Mac Disc of Lawless Leo shown in windows explorer window Not sure if the content of the package is readable for the mac os installer and how to inject into the iso. Thanks Giuliano Link to comment Share on other sites More sharing options...
Recommended Posts