boldy Posted March 6, 2006 Share Posted March 6, 2006 Hi everyone, I have been experimenting on a Dell Inspiron 630m series and have gotten osx86 10.4.3 with Jas 4.2b Patch running native in a dual-boot environment with windows. I have put up my findings in the wiki on 10.4.3 HCL list. Unfortunately, the only problem left is with the audio, which it using a Sigmatel 9200 HD C-Major HD Audio. The Audio preference console in OSX has listed "Play Alerts and Sound effects through: HD Audio Output" where the "HD Audio Output" is greyed out. So far i found that by leaving AppleAzaliaAudio.kext in the extensions, Audio control works, but nothing is being outputed thru the notebook's speakers. Any attempt to change the defaulted plist of 0x26688086 in AppleAzaliaController.kext (in the plugins folder) would result in no device detected in the Audio preference console. I have no idea on what to do next, and the Sigmatel HD Audio DEV ID is 7690 and VENDOR ID is 8384 (from DXDiag output). Any help would be greatly appreciated. Sincerely, Joe Link to comment https://www.insanelymac.com/forum/topic/11149-sigmatel-9200-hd-c-major-audio-no-audible-output/ Share on other sites More sharing options...
Blackice Posted March 6, 2006 Share Posted March 6, 2006 I also have a SigmaTel HD Audio onboard, Device: 7661. I don't get any recognition under 10.4.3, and 10.4.5 tells me I'm on an "Intel High Definition Audio" device, but nothing more. It also doesn't recognise any more than that. Link to comment https://www.insanelymac.com/forum/topic/11149-sigmatel-9200-hd-c-major-audio-no-audible-output/#findComment-70027 Share on other sites More sharing options...
randomblame Posted March 7, 2006 Share Posted March 7, 2006 same device on my xpsm140 no audio if somebody figures out a solution I'll give them a cookie Link to comment https://www.insanelymac.com/forum/topic/11149-sigmatel-9200-hd-c-major-audio-no-audible-output/#findComment-70554 Share on other sites More sharing options...
ace11 Posted March 13, 2006 Share Posted March 13, 2006 Saim damn problem (630m) If you ask me, I say we should start a M140/630M OSX86 club and help each other with the spacific problems that come along with our littel dells. Link to comment https://www.insanelymac.com/forum/topic/11149-sigmatel-9200-hd-c-major-audio-no-audible-output/#findComment-74872 Share on other sites More sharing options...
insertnamehere Posted March 14, 2006 Share Posted March 14, 2006 Saim damn problem (630m) If you ask me, I say we should start a M140/630M OSX86 club and help each other with the spacific problems that come along with our littel dells. true dat same problem as all you guys Link to comment https://www.insanelymac.com/forum/topic/11149-sigmatel-9200-hd-c-major-audio-no-audible-output/#findComment-74967 Share on other sites More sharing options...
randomblame Posted March 14, 2006 Share Posted March 14, 2006 I have the same id's as boldy "DEV ID is 7690 and VENDOR ID is 8384" I just reinstalled mac os with my new myzar dvd and miraculously sound works in vmware (it never has before) unfortunately it still does not work natively... anyone figure out a fix for this card? Link to comment https://www.insanelymac.com/forum/topic/11149-sigmatel-9200-hd-c-major-audio-no-audible-output/#findComment-75640 Share on other sites More sharing options...
takeawaydave Posted March 14, 2006 Share Posted March 14, 2006 I have similar Sigmatel HD Audio DEV ID is 7680 and VENDOR ID is 8384 (from DXDiag output). I get a v. low hiss crackle when listening through headphones (plugged in to headphone socket) when I move the mouse. Does any one else experience this? Link to comment https://www.insanelymac.com/forum/topic/11149-sigmatel-9200-hd-c-major-audio-no-audible-output/#findComment-75657 Share on other sites More sharing options...
devilhood Posted March 17, 2006 Share Posted March 17, 2006 I also just recieved my brand spanking new laptop and yes, it has a Sigmatel 9200, so no sound Solutions possibly anyone? Link to comment https://www.insanelymac.com/forum/topic/11149-sigmatel-9200-hd-c-major-audio-no-audible-output/#findComment-77504 Share on other sites More sharing options...
Falcon9x5 Posted March 17, 2006 Share Posted March 17, 2006 I've a Sigmatel HD too, (7690). Posting this from a native install, without sound Only solution I can think of is to buy a cheap USB soundcard (one on amazoncouk for £17). Someone write a sigmatel driver, and they'll get the £17 instead Link to comment https://www.insanelymac.com/forum/topic/11149-sigmatel-9200-hd-c-major-audio-no-audible-output/#findComment-77650 Share on other sites More sharing options...
devilhood Posted March 18, 2006 Share Posted March 18, 2006 I've a Sigmatel HD too, (7690). Posting this from a native install, without sound Only solution I can think of is to buy a cheap USB soundcard (one on amazoncouk for £17). Someone write a sigmatel driver, and they'll get the £17 instead maybe this issue will be addressed with 10.4.6, drivers in their current state don't seem to like DEV_7690 at all Link to comment https://www.insanelymac.com/forum/topic/11149-sigmatel-9200-hd-c-major-audio-no-audible-output/#findComment-78226 Share on other sites More sharing options...
takeawaydave Posted March 24, 2006 Share Posted March 24, 2006 Try AppleHDA kext frpom 10.4.3. A simple replace worked for me. Link to comment https://www.insanelymac.com/forum/topic/11149-sigmatel-9200-hd-c-major-audio-no-audible-output/#findComment-82160 Share on other sites More sharing options...
Rockviech Posted March 24, 2006 Share Posted March 24, 2006 you only cp it or did you something like chmod or chown?? Link to comment https://www.insanelymac.com/forum/topic/11149-sigmatel-9200-hd-c-major-audio-no-audible-output/#findComment-82216 Share on other sites More sharing options...
takeawaydave Posted March 25, 2006 Share Posted March 25, 2006 well yeah I chmodded 755 and chowned root:system otherwise repair disk permissions. Link to comment https://www.insanelymac.com/forum/topic/11149-sigmatel-9200-hd-c-major-audio-no-audible-output/#findComment-82515 Share on other sites More sharing options...
xedeon Posted March 26, 2006 Share Posted March 26, 2006 Same Dev id's on my Dell Inspiron B120 installed from the 10.4.4/5 Myzar DVD Everything else works like video (perfect with QE and CI) and Airport Wireless (Dell wireless 1370) sound is really the only thing that is broken I tried replacing AppleHDA.kext and AppleAzaliaAudio.kext from 10.4.3 and adding the dev id although I can see "HD Audio Output" in System Preferences but no sound is coming out of the speakers or audio ports.. VEN_8384 DEV_7690 REV_1022 ? UAA Bus driver VEN_8086 DEV_2668 South Bridge Properties: South Bridge Intel 82801FBM ICH6-M Revision / Stepping D3 / B1 Package Type 609 Pin mBGA Package Size 3.1 cm x 3.1 cm Core Voltage 1.5 V High Definition Audio: Audio Controller Type Intel 82801FB(M) ICH6 Codec Name SigmaTel STAC9200 Codec ID 83847690h Codec Revision 00102201h Link to comment https://www.insanelymac.com/forum/topic/11149-sigmatel-9200-hd-c-major-audio-no-audible-output/#findComment-83436 Share on other sites More sharing options...
Jiggyda Posted May 17, 2006 Share Posted May 17, 2006 Same {censored} here! I have a Dell Inspiron 1300 with 8384/7690 and no sound working. No solutions yet? Same Dev id's on my Dell Inspiron B120 installed from the 10.4.4/5 Myzar DVD Everything else works like video (perfect with QE and CI) and Airport Wireless (Dell wireless 1370) sound is really the only thing that is broken I tried replacing AppleHDA.kext and AppleAzaliaAudio.kext from 10.4.3 and adding the dev id although I can see "HD Audio Output" in System Preferences but no sound is coming out of the speakers or audio ports..VEN_8384 DEV_7690 REV_1022 ? UAA Bus driver VEN_8086 DEV_2668 South Bridge Properties: South Bridge Intel 82801FBM ICH6-M Revision / Stepping D3 / B1 Package Type 609 Pin mBGA Package Size 3.1 cm x 3.1 cm Core Voltage 1.5 V High Definition Audio: Audio Controller Type Intel 82801FB(M) ICH6 Codec Name SigmaTel STAC9200 Codec ID 83847690h Codec Revision 00102201h Link to comment https://www.insanelymac.com/forum/topic/11149-sigmatel-9200-hd-c-major-audio-no-audible-output/#findComment-114286 Share on other sites More sharing options...
Zappadoc Posted May 17, 2006 Share Posted May 17, 2006 Y.A.S.P. (Yet Another Sigmatel Post ) it works on vmware because they use an AC97 emulation on top of the Sigmatel WINDOWS driver... Z Link to comment https://www.insanelymac.com/forum/topic/11149-sigmatel-9200-hd-c-major-audio-no-audible-output/#findComment-114379 Share on other sites More sharing options...
nev6 Posted May 18, 2006 Share Posted May 18, 2006 I also just recieved my brand spanking new laptop and yes, it has a Sigmatel 9200, so no sound Solutions possibly anyone? http://forum.osx86project.org/index.php?sh...l=sigmatel+9200 supposedly THIS patched version has a fix for it. I've yet to try it though. So let's download and seed, shall we : ) Link to comment https://www.insanelymac.com/forum/topic/11149-sigmatel-9200-hd-c-major-audio-no-audible-output/#findComment-115042 Share on other sites More sharing options...
bofors Posted May 18, 2006 Share Posted May 18, 2006 Sound Device: SigmaTel Audio Hardware ID: HDAUDIO\FUNC_01&VEN_8384&DEV_7680&SUBSYS_80860606&REV_1032 I would like to have audio input and output working... I have installed 10.4.3 and 10.4.5 on my Intel G945GTPLKR motherboard, and neither has audio, though everything else seems to work in both. if there is anyone that has resolved this issue with their audio, could you please point me in the right direction... I have seen posts such as use the AudioHDA from 10.4.3 but, unfortunately, I don't understand... use it for what? where do I get it? how do I use it, and do I have to actually edit files. I have also looked into some of the plist files, and don't quite understand anything there, but I see no entry for ICH7 which is ths southbridge used on this board. I hope you have gotten this resolved by now, but just in case: You have a Sigma 9220, not a 9200. You can get audio out the wrong port in the back simply by using the 10.4.3 version of the AppleHDA.kext. Link to comment https://www.insanelymac.com/forum/topic/11149-sigmatel-9200-hd-c-major-audio-no-audible-output/#findComment-115054 Share on other sites More sharing options...
doggyworld Posted May 26, 2006 Share Posted May 26, 2006 Try AppleHDA kext frpom 10.4.3. A simple replace worked for me. Does anyone have the AppleHDA.kext from 10.4.3 they could post? I'm thinking maybe this will work if we can somehow switch the output to be correct. Link to comment https://www.insanelymac.com/forum/topic/11149-sigmatel-9200-hd-c-major-audio-no-audible-output/#findComment-119787 Share on other sites More sharing options...
jya Posted July 20, 2006 Share Posted July 20, 2006 Does anyone have the AppleHDA.kext from 10.4.3 they could post? I'm thinking maybe this will work if we can somehow switch the output to be correct. Well, I have a 10.4.3 original DVD, and there's no AppleHDA.kext in it! Link to comment https://www.insanelymac.com/forum/topic/11149-sigmatel-9200-hd-c-major-audio-no-audible-output/#findComment-147693 Share on other sites More sharing options...
xSuRgEx Posted September 1, 2006 Share Posted September 1, 2006 dell inspiron 1300 sound is showing on the system but no sound is comming out. used the sigmatell drivers at install. any one know how to make it work properly.? Link to comment https://www.insanelymac.com/forum/topic/11149-sigmatel-9200-hd-c-major-audio-no-audible-output/#findComment-179183 Share on other sites More sharing options...
Recommended Posts