Leaderboard

thanks for reply eSaF AND Miliuco, it was from my giba modem(bell) I just adjusted and now the speed is 32MB/sec, thanks a lot mates

Installing Windows from macOS. Suitable for Hackintosh and Macintosh (install drivers yourself). Possibility to make a backup. Utilities are used - wimlib and ntfs-3g. There is a drag and drop support function. Compatible with Mac OS X 10.13 and up. Intel only! Training video - Download App - https://sourceforge.net/projects/windows-install/

Direct download link for macOS Ventura 13.5.1 http://swcdn.apple.com/content/downloads/25/45/042-25643-A_KS23W0LI3U/f93qd41yyv7b4a4jmubqoiq89ldcpl6bbp/InstallAssistant.pkg

No, the problem I had was that I couldn't apply a patch on a 200g disk on a Hasweel computer, but on the SSD with the highest capacity, the patch was applied perfectly without a problem using this method.

A couple of days ago, I've tested booting Window from an SSD via an Exteral USB enclosure using OpenCore on my iMac11,3. It booted without any issues. Windows update even found drivers for it. So no need to use Boot Camp Assistant, etc.. This was just a test in my case, but you could install Windows on a disk on the PC, mount the EFI add the OC folder put in the drive into the mac and boot it. This eleminates all the prep work with Boot Camp Assistant and then just run Brigardier from within Windows to download and installe the relevant Bootcamp/Device drivers. Of course this only workson macs that support removable drives.

@maly70 My Fenvi gets same speed on Sonoma after OCLP patch than in previous macOS OOTB.

@maly70 - I don't know what to suggest at this point as I get the same speed in Sonoma as I do in Ventura and Big Sur.

@Stefanalmare i tried your efi,It opens but unfortunately it stays on a black screen.😒 I don't know where am I doing wrong? igpu settings in bios PEG, intel hd4000 enabled (64MHz),even in monterey 12.6 it boots with rx560.. My bios settings are ok, I changed hdmi ports,I waited for half an hour, apple logo did not appear.. thank you for your help good man EDITED OpenCore Legacy Patcher Guide

no vacation at apple...

On another hard drive without a problem, the installation is completely satisfactory, see photo. The problem may be the available space on the other hard drive which is only 200g. I will use this without OCPL patching

Trillions of good photo and artworks? Any criteria to chose from?

For me HDMI audio works in Ventura but not at boot time with AudioDxe connected to AMD RX570. AFAIK the driver AudioDxe can't work with AMD HDMI audio. May be it will work with Intel or Nvidia HDMI audio.

Working fine in Beta 5, don't forget you have to give it permission to access the Disk and then reboot.

I gave my HackBookPro15,2 (HP Envy x360 i5-8250U) to my wife after restoring Windows (was running macOS Monterey perfectly). My laptop is now the HackBookPro6,2 that I documented here. Before I gave her the HP Envy laptop, I removed the BCM94360NG and replaced it with the original Intel Wi-Fi/Bluetooth card. I installed the BCM94360NG in my HP EliteDesk 800 G4 Mini 65W using the steps below and Wi-Fi / Bluetooth are working without any problems in macOS Ventura 13.1 Beta 3. BCM94360NG Installation Steps Install BCM94360NG card and connect antennas Enable Bluetooth USB in BIOS (there are two items in BIOS that must be configured for working Bluetooth) BIOS System Options BIOS Built-in Device Options Revise EFI as follows: Create a new USBPorts.kext by editing the USBPorts-16.kext that I include in my EFI: Edit USBPorts-16.kext/Contents/Info.plist to remove port SS10 so that the Info.plist has only 15 USB ports while enabling port HS14 (for Bluetooth). 15 USB ports is the max allowed by macOS Ventura. Replace the existing USBPorts kext in my EFI with this new USBPorts.kext that now includes USB port HS14 Add AirportBrcmFixup.kext to OC/Kexts and in the config.plist Kexts > Add (addition of this kext is probably optional but just a habit for me) Boot Ventura and configure Wi-Fi Turn-on Bluetooth and connect to Bluetooth devices When I installed the Wi-Fi card in the EliteDesk 800 G4 Mini, I didn't like that the antenna connector made contact with the mounting screw (which is grounded) (this doesn't happen with the Intel card, because the Intel card's antenna ports are both to one side of the mounting screw). To insulate the antenna connector from the mounting screw, I placed electrical tape over the mounting screw as shown below. Installed BCM94360NG Card My home Internet connection is 75 Mbps down and 5 Mbps up. As you can see, with an 802.11a Wi-Fi link, I'm maxing out my home Internet speed. For the test below, I'm 100 feet way from my router / AP on a different floor through several walls (wood / drywall construction). This Wi-Fi / Bluetooth card is fine for me. If you have blazing fast Internet with a modern router / 802.11ac AP, this card will limit your performance as discussed here. I am using the antennas that came with the EliteDesk 800 G4 Mini 65W. My home Internet connection is 75 Mbps down / 5 Mpbs up, so this card is fine for me EDIT: New Internet connection speedtest I checked with my Internet provider and learned that I'm supposed to be getting 10Mbps up, so I re-ran the test with a different speedtest (still connected via Wi-Fi). New results are below. Up and down speeds are good. It appears that different speed tests produce different results.