117 replies to this topic

[alepro2]

olivier-h, on Nov 6 2007, 06:34 PM, said:

For me the way over windows just worked fine.

I managed to resize partitions, but not the one the OS is installed on with diskutil ( the graphic one too), for that you need a fresh HD ( or a 2G Flashcard for my try), erase all partitions , make 2 new ones (HFS+) and choose GUD in options.Afterthat you can resize the partitions.

Sorry, I don't quite understand how you did this. Could you elaborate a little more?

Cheers, much appreciated!

[mjaleo]

Me either... I did it the same way that olliver-h said, but I could never resize the 15GB partition.

[dhomi]

Ok, haven't tried the clone image yet. But sure, there must be an easier way. It would so great, this flat image is the easiest way to install osx I've ever seen. A 15Gb partition is very little nowadays, especially when the remaining space is not allocated...

[zuza]

My first partition was 15 GB, I've created a second one 45 GB from Vista and then went into Leopard, erase the second partition and then:

sudo diskutil mergePartitions "Journaled HFS+" New disk1s1 disk1s2

Merged successfully, 60 GB!

[raulb]

Hey Zuza, that sounds interesting. A lot of people are stuck with 15gb partitions and trying to figure out how to expand the partition. Can you give more details on how to do this.

[zuza]

Ok, I've started with a 15 GB partition (on a 400GB disk). In Vista I've created a second partition but did not format it. From Leopard I've erased the newly created partition and then used:

diskutil list

that listed back 2 partitions with the identifiers: disk1s1 and disk1s2 (in other cases might be disk0...)

Now,

sudo diskutil mergePartitions "Journaled HFS+" New disk1s1 disk1s2

did the trick (New is the name, it will actually be ignored).

The first partition will be kept intact and the second one will be "merged" therefore you will loose all contents (I made sure it was empty before running the merge just in case).

[raulb]

ok am trying this, lets hope for the best. Since this works for you I am sure it will be a big help for a lot of folks. Just hope it works for me. Cheers.

Edit: Zuza, you are a genuis, It worked! And to think it was so simple all along.

You must make a new thread with this both here and at OSX86scene.com where hundreds of people are still struggling with this and devising lots of complicated schemes to enlarge their leopard partitions. They will be thrilled.

Please do and a huge thank you from me.

[zuza]

raulb, glad to hear that it worked. I've started a new thread on this.

[raulb]

Great. Not only did it work but it was so simple, fast and effortless. As opposed to cloning disks, working from 2 osx installs, restoring, using arcane and time consuming tools and god knows what else has been tried to enlarge the 15gb partition. Cheers.

[alepro2]

zuza, on Nov 7 2007, 09:13 AM, said:

Ok, I've started with a 15 GB partition (on a 400GB disk). In Vista I've created a second partition but did not format it. From Leopard I've erased the newly created partition and then used:

diskutil list

that listed back 2 partitions with the identifiers: disk1s1 and disk1s2 (in other cases might be disk0...)

Now,

sudo diskutil mergePartitions "Journaled HFS+" New disk1s1 disk1s2

did the trick (New is the name, it will actually be ignored).

The first partition will be kept intact and the second one will be "merged" therefore you will loose all contents (I made sure it was empty before running the merge just in case).

This works effortlessly! Thanks a billion!!!

[mjaleo]

Zuza is the MAN!!!!!

Haha, now this is really useful!

[mrfatcatt]

this method  works  and my drive changes to the full size but when i reboot it kills the drive and i cant get into the os anymore.

[Digital Dark Age]

mrfatcat: The exact same thing happened to me.  It ended up that my drive wasn't active.  I used Acronis in Windows XP to set the drive to active and it booted right back up.  I'm not sure why I got a disk out of space message the first time.  Perhpaps it just required a reboot.  At any rate, Zuza kicks ass!

[mrfatcatt]

can i use the dsk management to make the drive active in vista?

[prototype_sx]

I DID IT!!!!!

Go to http://www.jasonmadi...d-installation/ and follow his instructions and you will be successful!!

I downloaded the zip file and followed the instructions from "5. Making it bootable"

Things you will need:
1. A partition thats writable from osx besides the one you install to (it HAS to be on a seperate disk)
2. A install DVD
3 Patience lol



Things I did:

1. Install from flat image, logged into it and made sure it was up and running well
2. booted with the install DVD and went to disk utility
3. made an image of the partition that was created in 1 and saved it to another disk (disk must be hfs or fat32)
4. Partitioned and resized the drive I want leopard to be on in the end., this is the same drive you had created the flat image on.  Make SURE its formatted MBR when partitioning (My drive is a 320gb sata, I made osx 40gb and the rest another partition, you can make it whatever size you like)
5. Restore the image you created in 3 to the new larger partition you created for leopard in 4 (click the restore tab to the far right then right click the partition you created for leopard and select "destination" (i THINK thats what it said) and right click the image file you created and select SOURCE (the image file created in 3 will appear on the left after its created)

After this its just following the instructions on the website posted above.

One thing to note, remember to extract the files to ur thumb drive lol,  

Also the section on the site where it says "Use cd to move into the makebootable folder in our USB drive, e.g. “cd /Volume/MyUSBDrive/makebootable” I had to put cd.. (then press enter) 4 times before it allowed me to change directory.  I also did it step by step as in:
cd ..  (enter)
cd ..  (enter)
cd ..  (enter)
cd ..  (enter)
cd Volumes  (enter)
cd "MyUSBDrive"  (enter) (you put whatever you name for YOUR thumb drive or usb drive)
cd makebootable  (enter)

I'm bad at explaining stuff but I hope its clear enough so you can understand, i'm just so glad i found a way to make it work.


NO credit goes to me of course as I only followed instructions

Thanks to all that made it possible for us noobs

Proof!

[alepro2]

prototype_sx, on Nov 7 2007, 06:43 PM, said:

I DID IT!!!!!

Go to http://www.jasonmadi...d-installation/ and follow his instructions and you will be successful!!

I downloaded the zip file and followed the instructions from "5. Making it bootable"

Things you will need:
1. A partition thats writable from osx besides the one you install to (it HAS to be on a seperate disk)
2. A install DVD
3 Patience lol



Things I did:

1. Install from flat image, logged into it and made sure it was up and running well
2. booted with the install DVD and went to disk utility
3. made an image of the partition that was created in 1 and saved it to another disk (disk must be hfs or fat32)
4. Partitioned and resized the drive I want leopard to be on in the end., this is the same drive you had created the flat image on.  Make SURE its formatted MBR when partitioning (My drive is a 320gb sata, I made osx 40gb and the rest another partition, you can make it whatever size you like)
5. Restore the image you created in 3 to the new larger partition you created for leopard in 4 (click the restore tab to the far right then right click the partition you created for leopard and select "destination" (i THINK thats what it said) and right click the image file you created and select SOURCE (the image file created in 3 will appear on the left after its created)

After this its just following the instructions on the website posted above.

One thing to note, remember to extract the files to ur thumb drive lol,  

Also the section on the site where it says "Use cd to move into the makebootable folder in our USB drive, e.g. “cd /Volume/MyUSBDrive/makebootable” I had to put cd.. (then press enter) 4 times before it allowed me to change directory.  I also did it step by step as in:
cd ..  (enter)
cd ..  (enter)
cd ..  (enter)
cd ..  (enter)
cd Volumes  (enter)
cd "MyUSBDrive"  (enter) (you put whatever you name for YOUR thumb drive or usb drive)
cd makebootable  (enter)

I'm bad at explaining stuff but I hope its clear enough so you can understand, i'm just so glad i found a way to make it work.


NO credit goes to me of course as I only followed instructions

Thanks to all that made it possible for us noobs

Proof!

Wow, this looks a fair bit more complicated then the solution confirmed above. Thanks for the tutorial though. Might come in handy some time.

[mjaleo]

Digital Dark Age, on Nov 7 2007, 01:47 AM, said:

mrfatcat: The exact same thing happened to me.  It ended up that my drive wasn't active.  I used Acronis in Windows XP to set the drive to active and it booted right back up.  I'm not sure why I got a disk out of space message the first time.  Perhpaps it just required a reboot.  At any rate, Zuza kicks ass!

Thanks.  Was coming back (from work) to post "oh no what happened " but it seems you have cleared it up.

I'll boot into vista and try this.  Thanks for the help!

[mrfatcatt]

Digital Dark Age was right...if it doesnt boot after you merge it, reboot back into vista and install acronis and set the big new mac partion drive to "active". That fixed it for me....for me..i have a 250 hfs drive partion and then i also added a 250 ntfs drive=500

he also suggested to do this....... "run fsck -y in single user mode as there might be some disk errors. "

my question is still, do i need acronis? I am surprised the vista dsk mangement wouldnt do it. anyways

thanks

[dhomi]

mrfatcatt, on Nov 7 2007, 09:16 PM, said:

Digital Dark Age was right...if it doesnt boot after you merge it, reboot back into vista and install acronis and set the big new mac partion drive to "active". That fixed it for me....for me..i have a 250 hfs drive partion and then i also added a 250 ntfs drive=500

he also suggested to do this....... "run fsck -y in single user mode as there might be some disk errors. "

my question is still, do i need acronis? I am surprised the vista dsk mangement wouldnt do it. anyways

thanks

Yes, you do. I tried it with Vista disk management, I got an error at the boot something like it doesn't recognise my HFS+ partition. Acronis did the work alright. I'm still struggling to merge those partitions.

This what I have in Terminal :
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *69.2 Gi    disk1
   1:                  Apple_HFS Leopard                 15.0 Gi    disk1s1
   2:                  Apple_HFS disk0s2                 54.2 Gi    disk1s2

This is what I think I should type in :
sudo diskutil mergePartitions "Journaled HFS+" New disk1s1 disk1s2

Gonna try that once more and see, last time I did, nothing happened except the second partition was set to active...

[kfernandes29]

To make it active again after using this method (which words perfectly and quickly btw) just boot up windows and start up diskpart.exe

list disk (I had Leopard on Disk 1 - Partition 1 so I will use that for this walkthrough)

select disk 1

list partition

select partition 1

active

Then exit and restart....boot from Leopard and you're set, no need for Acronis or other Partition programs.