The Complete Dell XPS m1210 Installation + Dual Boot Tutorial
Started by seaDonkey, Feb 10 2007 05:58 AM
571 replies to this topic
#561
Posted 05 November 2009 - 11:12 AM
Hello all, I figured I'd post my same question on this thread as well they are both related and I'm unsure which one sees the most traffic.
I've never really had any problems with my OS after following the guide at the beginning. I have since then upgraded to 10.5.6 and now recently to 10.5.8. I never had a problem with the 10.5.6 upgrade nor did I have to enter any safe mode to reinstall drivers.
10.5.8 however is a different story. After making the upgrade, rebooted back into OS X to find my sound was not working working and the touchpad and keyboard do not work on the M1210. I didn't know that at the time as I was using a USB keyboard/mouse setup. I've re-patched the audio with AppleHDAPatcher and successfully brought my sound back. The keyboard and touchpad however, I have no clue what to do.
Also, does anyone know of a later video driver setup? I tried a dvd the other day and it caused all the menus to go a scratchy green; very difficult to find the restart button thereafter. I'm currently using the NVinjectGo setup provided at the beginning of this thread.
Thanks in advance and I'll chime it if I figure anything out on my end.
Cheers,
duff
I've never really had any problems with my OS after following the guide at the beginning. I have since then upgraded to 10.5.6 and now recently to 10.5.8. I never had a problem with the 10.5.6 upgrade nor did I have to enter any safe mode to reinstall drivers.
10.5.8 however is a different story. After making the upgrade, rebooted back into OS X to find my sound was not working working and the touchpad and keyboard do not work on the M1210. I didn't know that at the time as I was using a USB keyboard/mouse setup. I've re-patched the audio with AppleHDAPatcher and successfully brought my sound back. The keyboard and touchpad however, I have no clue what to do.
Also, does anyone know of a later video driver setup? I tried a dvd the other day and it caused all the menus to go a scratchy green; very difficult to find the restart button thereafter. I'm currently using the NVinjectGo setup provided at the beginning of this thread.
Thanks in advance and I'll chime it if I figure anything out on my end.
Cheers,
duff
#562
Posted 09 March 2010 - 03:16 AM
alfdog, on Apr 5 2007, 01:17 PM, said:
Dell XPS M1210: XP + JAS 10.4.8 Mifki
CPU: Intel Core 2 Duo T7200 2.0Ghz - (Only one core works) <---- both cores are working now =)
RAM: 2GB @ 667mhz DDR2
Video: Nvidia Geforce GO7400 - (QE/QE2D/CI supported w/Natit universal 1.0)
Audio: Sigmatel 9220 - (FULLY WORKING! speakers and all!!!)
Storage:100gb 7200RPM Seagate SATA
Optical: Dual layer DVD +/- RW - (Fully working)
Ethernet: Broadcom 440x - (Fully working)
Dell 1390 b/g - (Working as Airport Express)
Bluetooth: Dell 355 - (Working)
Touchpad/usb: works - (no 2 finger scrolling, tapping works)
Webcam: tried macam and Logitech osx drivers - (NOT working)
Interal card reader - (not working)
ACPI- DISPLAY WON'T RECOVER FROM SLEEP HELP!
I hope this isn't too far off topic, but since we are all m1210 owners, and OSx86 users, and macbooks have slot load drives...
I saw this, and now I'm getting tempted to get one just for the hell of it.
http://www.zipzoomfl...ductCode=175305
CPU: Intel Core 2 Duo T7200 2.0Ghz - (Only one core works) <---- both cores are working now =)
RAM: 2GB @ 667mhz DDR2
Video: Nvidia Geforce GO7400 - (QE/QE2D/CI supported w/Natit universal 1.0)
Audio: Sigmatel 9220 - (FULLY WORKING! speakers and all!!!)
Storage:100gb 7200RPM Seagate SATA
Optical: Dual layer DVD +/- RW - (Fully working)
Ethernet: Broadcom 440x - (Fully working)
Dell 1390 b/g - (Working as Airport Express)
Bluetooth: Dell 355 - (Working)
Touchpad/usb: works - (no 2 finger scrolling, tapping works)
Webcam: tried macam and Logitech osx drivers - (NOT working)
Interal card reader - (not working)
ACPI- DISPLAY WON'T RECOVER FROM SLEEP HELP!
Click here for my XPS m1210 Installation Tutorial
"Also, I have not tried the 10.4.9 update yet. I'm kinda scared that one of my apps will quit working properly, I use OSX for work alot. The apps I use the most are Photoshop CS2, garagesale, firefox, thunderbird and aperture."
I can see your point for not wanting to mess with a good thing, I haven't had any problems at all, but I don't use this for work, and I don't use photoshop. A good indicator for what would be affected is probably the official notes for the 10.4.9 install. I've installed ilife, iwork, office 2004, firefox all preupdate and no problems.
Jami,
The mifki kernal is only needed to get the speakers working. I'm sorry about your slow internet speeds, that's rough.
As for getting that card in India, I think your best bet is going through Dell directly
here are the product links for both the 1390 and 1490 cards, so you can get part/model numbers
http://accessories.u...mp;sku=430-1731
http://accessories.u...mp;sku=430-1733
here is the phone number for Dell in India, I'm not sure if the 1-800 number will work there.
Call1800- 425- 4026 Toll Free or Call 080-2506-8026 (standard charges apply)
as I've said before...
Good Luck
you definitely have a challange on your hands
Jami,
The mifki kernal is only needed to get the speakers working. I'm sorry about your slow internet speeds, that's rough.
As for getting that card in India, I think your best bet is going through Dell directly
here are the product links for both the 1390 and 1490 cards, so you can get part/model numbers
http://accessories.u...mp;sku=430-1731
http://accessories.u...mp;sku=430-1733
here is the phone number for Dell in India, I'm not sure if the 1-800 number will work there.
Call1800- 425- 4026 Toll Free or Call 080-2506-8026 (standard charges apply)
as I've said before...
Good Luck
you definitely have a challange on your hands
I hope this isn't too far off topic, but since we are all m1210 owners, and OSx86 users, and macbooks have slot load drives...
I saw this, and now I'm getting tempted to get one just for the hell of it.
http://www.zipzoomfl...ductCode=175305
How did you do for the core CPUs, it only shows one core!
thanks
#563
Posted 17 June 2010 - 06:49 PM
#564
Posted 22 July 2010 - 03:41 PM
Ombaudsman, on Jun 17 2010, 08:49 PM, said:
I used to have Leopard installed on my Dell XPS m1210. Everything (except USB) used to work perfectly, including wi-fi. I had to change the HD for a larger one (500gb) and I have bought an original copy of Snow Leopard that I’m using on my Desktop Hackintosh. For now I can only find tutorials about how to install “Leopard” on it, but I was willing to use my original copy of Snow Leopard instead of downloading those hacked distributions of Leopard. Anyone have already tried to install SL on a Dell XPS m1210?
Yes, 10.6.4 retail with EmpireEFI 1.0.85 R2
I will make a tuto these next days...
but it is easy, you need only three packages
VoodooHDA.kext
VoodooTSCSync.kext
NVEnabler.kext for geforce go 7400
#565
Posted 29 September 2010 - 01:22 AM
#566
Posted 28 October 2010 - 08:20 AM
yES, where is the tuto?!
lol
lol
#567
Posted 01 November 2010 - 12:17 AM
Hi all,
I've just gotten my m1210 set up with dual boot (Win 7 + OSX 10.6.4) with nearly everything working.
Is there still any interest in a tutorial for this?
I've just gotten my m1210 set up with dual boot (Win 7 + OSX 10.6.4) with nearly everything working.
Is there still any interest in a tutorial for this?
#568
Posted 03 November 2010 - 06:41 PM
#569
Posted 10 December 2010 - 04:16 AM
still waiting for the tut
#570
Posted 02 January 2011 - 03:18 PM
callummc, on Oct 31 2010, 06:17 PM, said:
Hi all,
I've just gotten my m1210 set up with dual boot (Win 7 + OSX 10.6.4) with nearly everything working.
Is there still any interest in a tutorial for this?
I've just gotten my m1210 set up with dual boot (Win 7 + OSX 10.6.4) with nearly everything working.
Is there still any interest in a tutorial for this?
I would really love to see this tutorial. I have my m1210 running with mac os x 10.5.6 with everything working. But now I want to upgrade to snow leopard.
Please send me the tutorial or post asap.
Thanks.
#571
Posted 04 January 2011 - 02:32 AM
seaDonkey, on Feb 9 2007, 11:58 PM, said:
Foreword/disclaimer:
how'd you get the external display working?
#572
Posted 03 April 2012 - 03:40 PM
Anyone can help what is the best way! I got to boot but pc super laggy and keep loosing Internet connection please update guide thank you
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users



Sign In
Create Account








