brickman7713 Posted July 26, 2017 Share Posted July 26, 2017 Where/how did you install that kext? Install/ copy that kext to your clover folder under kexts where your other kexts are. Then I assume the installer will recognize it too.I finally got it working using this fix. Thanks tho. https://youtu.be/eKM7IN4X0J0 Sent from my SM-G920V using Tapatalk Link to comment Share on other sites More sharing options...
brickman7713 Posted July 26, 2017 Share Posted July 26, 2017 Now that I got the fixed is there any possible ways to instill OSX beside Windows without deleting windows? Sent from my SM-G920V using Tapatalk Link to comment Share on other sites More sharing options...
MaLd0n Posted July 26, 2017 Author Share Posted July 26, 2017 Any ideas on my hard drive problem MaLd0N? Sent from my SM-G920V using Tapatalk check if have a "ProjSsdt" ssdt, if yes, drop Tried Nvidia GT610 and the onboard Intel 630, both giving me this kp... Also, on GT610 in safe mode i'm getting a black screen, with and without nvidia injection. Replaced the gfx card to GT210 and managed to boot it in safe mode only Update: Updated to 10.12.6 in safe mode with GT210, changed smbios to imac18,1 removed fakecpuid and now it's booting normally without safe mode. However, GT610 always gives a black screen now - with and without injection, with and without webdriver...( Update#2 With imac14,2 smbios i can get the GT610 working (webdriver, no injection) but the mouse cursor becomes invisible Update#3 Shut down doesn't works when any USB storage device connected, it restarts after 10 seconds. Tried enabling FixShutdown in Clover but it doesn't help... i think 610 dont work good anymore update ur bios for last version and send me ur clover folder with original dsdt, extract with f4 Link to comment Share on other sites More sharing options...
brickman7713 Posted July 26, 2017 Share Posted July 26, 2017 check if have a "ProjSsdt" ssdt, if yes, dropHey, I fixes that using this guide. https://youtu.be/eKM7IN4X0J0 Now is there anyway to install OSX beside Windows without deleting windows? Sent from my SM-G920V using Tapatalk Link to comment Share on other sites More sharing options...
MaLd0n Posted July 26, 2017 Author Share Posted July 26, 2017 Hi guys, I installed Sierra 10.12.6 on my Asus Z270-A and I7700k configuration following the guide in this post. I generated Ssdt with ssdtPRGen and copied it to Acpi patched. I would need the Dsdt edited for my configuration. Things I do not currently work on my system are: Recognized video card but I can not simultaneously use my 3 monitors attached to Hdmi - Dvi and Display port respectively. Audio not working in kext clover I've already copied the updated Apple Alc file. All kext files in Clover folder 10.12 are updated to the latest versions. Thank you all for the great help. Below I place the files in my system. CLOVER.zip 1 Link to comment Share on other sites More sharing options...
Glad79 Posted July 26, 2017 Share Posted July 26, 2017 CLOVER.zipThank you so much Mald0n for your help, I deleted my Clover folder replacing it with yours, the audio still does not work,the graphics work on a single monitor. sleep mode not work because the system reboot.How could I fix it? My audio codec is Realtek ALC S1220A 1 Link to comment Share on other sites More sharing options...
memedmedio Posted July 26, 2017 Share Posted July 26, 2017 Hi, Mald0n, i confused where i want to post this as i want your help on building DSDT for my system. Gigabyte GA-H110M-Gaming 3 i7-7700k MSI RX 580 8GB Everything is worked as expected, but having good DSDT would be a great addition for my system here's all required files Thankyou 1 Link to comment Share on other sites More sharing options...
brickman7713 Posted July 26, 2017 Share Posted July 26, 2017 Hi all, so this is my plan. First I have already copied my entire windows 10 drive on to anouther hard drive(hard drive 2) 1. Wipe hard drive 1 (internal hard drive) 2. Install Sierra on it 3. Install clover on it also 4. Partition space for windows in disk utility 5. Boot usb partition manager and copy windows C: partition back to hard drive 1. Is there any thing wrong with this? Sent from my SM-G920V using Tapatalk Link to comment Share on other sites More sharing options...
MaLd0n Posted July 27, 2017 Author Share Posted July 27, 2017 Thank you so much Mald0n for your help, I deleted my Clover folder replacing it with yours, the audio still does not work,the graphics work on a single monitor. sleep mode not work because the system reboot. How could I fix it? what ur audio codec? Hi, Mald0n, i confused where i want to post this as i want your help on building DSDT for my system. Gigabyte GA-H110M-Gaming 3 i7-7700k MSI RX 580 8GB Everything is worked as expected, but having good DSDT would be a great addition for my system here's all required files Thankyou send me files, check first post 1 Link to comment Share on other sites More sharing options...
brickman7713 Posted July 27, 2017 Share Posted July 27, 2017 Hey MaLd0n is there anyway to install OSX beside Windows without deleting windows? Or is there a sure way to backup windows and then restore it after installing OSX? Sent from my SM-G920V using Tapatalk 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted July 27, 2017 Author Share Posted July 27, 2017 i think yes, check forum search, have many good tutorials about it i dont use two systems in same HDD/SSD Link to comment Share on other sites More sharing options...
Glad79 Posted July 27, 2017 Share Posted July 27, 2017 what ur audio codec?Hi MaLd0n, my audio codec is Realtek ALC S1220A in config.plist devices audio/inject I tried different ID for S1220A=7,1,2,5 etc.I have update AppleAlc to last version but not work. 1 Link to comment Share on other sites More sharing options...
brickman7713 Posted July 27, 2017 Share Posted July 27, 2017 i think yes, check forum search, have many good tutorials about it i dont use two systems in same HDD/SSD Ok, I am gonna try this. https://youtu.be/9cA-abAkCzE Sent from my SM-G920V using Tapatalk Link to comment Share on other sites More sharing options...
memedmedio Posted July 27, 2017 Share Posted July 27, 2017 send me files, check first post i thought last night i have attach the file here's my file compressed in one zip... requested.zip 1 Link to comment Share on other sites More sharing options...
VirusX Posted July 27, 2017 Share Posted July 27, 2017 I finally got it working using this fix. Thanks tho. AHCI is of course needed. But that is standard for every mac OSX/ macOS installation since forever. I guess you skipped some tutorials before installing for the first time Glad that it works now though Hey MaLd0n is there anyway to install OSX beside Windows without deleting windows? Or is there a sure way to backup windows and then restore it after installing OSX? create a new partition on your windows hard drive, install macOS on that partition. Select your installation from the clover bootloader during boot. There are tons of tutorials in this forum and online. You are quicker by just searching than posting here and waiting for answers to basic questions... Link to comment Share on other sites More sharing options...
MaLd0n Posted July 27, 2017 Author Share Posted July 27, 2017 what ur audio codec?Hi MaLd0n, my audio codec is Realtek ALC S1220A in config.plist devices audio/inject I tried different ID for S1220A=7,1,2,5 etc. I have update AppleAlc to last version but not work. inject ids in clover, reboot and test DSDT.aml.zip i thought last night i have attach the file here's my file compressed in one zip... requested.zip id 3 work for audio? CLOVER.zip 2 Link to comment Share on other sites More sharing options...
Glad79 Posted July 27, 2017 Share Posted July 27, 2017 Hi MaLd0n with your last dsdt the audio works perfectly, I just modified in config.plist the audio-inject with 11. Good job! Thanks for what you do! It still does not work: Graphics card is recognized but not work in multi-display, only the Display port works. HDMI and DVI are not working. Sleep mode does not work because the system reboots Link to comment Share on other sites More sharing options...
brickman7713 Posted July 27, 2017 Share Posted July 27, 2017 Success! I an now dual booting Windows 10 and OSX Sierra without any flash drives or external drives! Now I just need to fix a couple graphic issues and try to fix Wi-Fi. Thank you all who helped! Sent from my SM-G920V using Tapatalk Link to comment Share on other sites More sharing options...
MaLd0n Posted July 27, 2017 Author Share Posted July 27, 2017 Hi MaLd0n with your last dsdt the audio works perfectly, I just modified in config.plist the audio-inject with 11. Good job! Thanks for what you do! It still does not work: Graphics card is recognized but not work in multi-display, only the Display port works. HDMI and DVI are not working. Sleep mode does not work because the system reboots graphics card is a clover config sleep, try a darkwake option in config.plist Link to comment Share on other sites More sharing options...
memedmedio Posted July 27, 2017 Share Posted July 27, 2017 id 3 work for audio? CLOVER.zip Yes, id 3 works for my audio. Replaced with yours and all work without a hitch. Thank you very much! Link to comment Share on other sites More sharing options...
tbrautaset Posted July 28, 2017 Share Posted July 28, 2017 (edited) Hello MaLd0n, Help me with DSDT/SSDTs. Only tried Clover ACPI fixes.. Edited November 25, 2020 by tbrautaset 1 Link to comment Share on other sites More sharing options...
Just another OSX newbie Posted July 30, 2017 Share Posted July 30, 2017 Hello MaLd0n, Please help me out. I installed High Sierra. I have only the intel hd 630. the gt710 gave me a black screen. I hope you have all the files you need. For now I can live with the hd 630 if I can get it working fully. TIA CLOVER.zip MaciOS High Sierra iMac.ioreg.zip 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted August 2, 2017 Author Share Posted August 2, 2017 ill check files tomorrow need sleep now 1 Link to comment Share on other sites More sharing options...
MaLd0n Posted August 2, 2017 Author Share Posted August 2, 2017 Hello MaLd0n, Please help me with my DSDT/SSDTs. I have only tried Clover ACPI fixes.. - No webcam, midi, surround / multichannel, brightness hotkeys, no usb CP210x USB to UART Bridge Virtual COM Port (VCP) recognition - Howto disable discrete graphics dual-GPU laptop for power saving since it¨s not supported ?, Native Power Management ? - Get the right audio layout, not only built-in Line Output (2nd) etc. Just to name a few on my long wish list Hardware: MSI GE72VR (MS-179B.3) 7RF 272NE Apache Pro (laptop) : Bios E179BIMS.309, EC-Firmware 179BEMS1.107 i7-7700HQ (4 Cores) / HM175 GeForce® GTX 1060 with 3GB GDDR5 1920x1080 32GB Crucial DDR4 2400MHz SODIMM Samsung 960 EVO 1TB M.2 NVMe SSD & WD Blue 1TB 2.5" SATA SSD Qualcomm Atheros Killer™ E2500 PCIe GBE Broadcom BCM94352Z M.2/NGFF 802.11AC 867Mbps Bluetooth 4.0 WIFI (Ordered, not arrived)...) Realtek ALC899 (ALC898! -GR ? ) 7.1+2ch DAC (Nahimic 360⁰ Audio Enhancer 2 , Dynaudio 2.1 Speakers; 4x 2W Speakers +1x 3W Subwoofer) steelSeries PS/2 Keyboard Synaptics PS/2 & SMBus Multi-Touch Touchpad HL-DT-ST GUD0N SATA Int. DVD±RW (±R DL) / DVD-RAM 1x HDMI 1.4 (4K @ 30Hz) 1x Mini DisplayPort 1.2 1x Headset ESS SABRE HiFi AMP + Gold Flash jacks (SPDIF) 1x Microphone jack USB (1 USB Asmedia 3.1 Type-C • 2 USB 3.0 • 1 USB 2.0) Realtek RTS5129 Card Reader (SD/SDHC/SDXC) BisonCam, NB Pro Webcam HD type (30fps@720p) + Int. Mic Clover v2.4k r4128 / macOS 10.12.6 (16G29) / MacBookPro13,3 Any help or clue would be much appreciated Attached are hopefully the files needed. Has added an additional F4 dump from Clover boot screen of my DSDT/SSDTs where nothing is marked under the ACPI tab in Clover Configurator Vibrant edition version 4.46.0 Thank you! need tests in many cases, we need a native support, usb 3,1, card reader, etc CLOVER.zip Hello MaLd0n, Please help me out. I installed High Sierra. I have only the intel hd 630. the gt710 gave me a black screen. I hope you have all the files you need. For now I can live with the hd 630 if I can get it working fully. TIA - SMBIOS : iMac18,3 - KERNEL AND KEXT PATCHES : remove FakeCPUID - DEVICES : Remove “Add Properties” for IntelGFX - GRAPHICS : “ig-platform-id” changed to 0x59120000 - DEVICES : “Fake ID” for IntelGFX changed to 0x59128086 - BOOT : Add “-disablegfxfirmware” under Custom Flags 1 Link to comment Share on other sites More sharing options...
tbrautaset Posted August 2, 2017 Share Posted August 2, 2017 (edited) On 8/2/2017 at 4:19 PM, MaLd0n said: need tests in many cases, we need a native support, usb 3,1, card reader, etc CLOVER.zip 100 series ! Thank you Edited November 25, 2020 by tbrautaset 1 Link to comment Share on other sites More sharing options...
Recommended Posts