552 replies to this topic

[Sinetek]

I GOT IT !!!!!!!!!!!

ARCH=x86_64 BOOTS!!!!!!!!!!

hint, it wasn't a KEXT problem

[pauℓzurrr.]

Sinetek, on 19 December 2012 - 10:15 AM, said:

I GOT IT !!!!!!!!!!!

ARCH=x86_64 BOOTS!!!!!!!!!!

hint, it wasn't a KEXT problem

Congrats Sinetek! Please elaborate

[IiTz ShAnE]

Sinetek, on 19 December 2012 - 10:15 AM, said:

I GOT IT !!!!!!!!!!!

ARCH=x86_64 BOOTS!!!!!!!!!!

hint, it wasn't a KEXT problem

Awesome work mate. New kernel to test soon?

[ham4ever]

Sinetek, on 19 December 2012 - 10:15 AM, said:

I GOT IT !!!!!!!!!!!

ARCH=x86_64 BOOTS!!!!!!!!!!

hint, it wasn't a KEXT problem

awesome man ,,is same last kernel ?

[spakk]

So guys, after so many breakdowns that I had in the last few days with my hardware. two hard drives shot! now I have Lion 10.7.2 installed. and will by and by multiple partitions with various versions of OS X install for testing.

the subsequent test are with sinetek lion 10.7 kernel and last sinetek patch file:

first test with boot flag: fips_mode=0 cpus=6 npci=0x3000 maxmem=4096 -enable_ssse3emu darkwake=0 pmVersion=0 -s

it stops at:

http://www.imgbox.de.../P6IfaxqV4z.jpg


the second test with boot flag: fips_mode=0 -enable_ssse3emu usekernelcache=No  -v -f

it stops at:



http://www.imgbox.de.../0EwcD7Tzs1.jpg


the third test with the last kernel for Snow Leopard to Lion 10.7.2, the system goes into an endless loop.

Hi sinetek, Hi theconnatic, when can we expect a new Test-kernel for Lion or Mountain Lion ?

Edited by spakk, 20 December 2012 - 07:46 PM.

[spakk]

it hangs on USBF; 6.669 AppleUSBOHCI

but no kernel panic, I can write with the keys

[spakk]

The stupid thing is there gives no message: waiting for root device
The keyboard is fully functional, which means I can still write with the keyboard

[Deltac0]

spakk, on 20 December 2012 - 11:40 PM, said:

it hangs on USBF; 6.669 AppleUSBOHCI

but no kernel panic, I can write with the keys

Remove all USB devices and try to boot?

[spakk]

Deltac0, on 21 December 2012 - 05:13 AM, said:

Remove all USB devices and try to boot?

Just for your information, I boot from an external USB hard drive.
I made the following adjustments:
The IOUSBFamily.Kext under /Plugins/  I removed the AppleUSBOHCI.kext and then booted the system:

BSD root: disk0s3, major 14, minor 3
jnl; unknown-dev: journal start / end pointers reset! (jnl 0x151e3e60, s e 0x4c0e00 0x4c0e00)

there gives no message: waiting for root device and the keyboard is fully functional

[spakk]

Deltac0, on 21 December 2012 - 08:27 AM, said:

I have a problem with the dyld thing. AnV kernel with custom dyld boots fine, but Sinetek's kernel gives weird error and reboot.
I'll upload a video to show it.

EDIT: heres a video





Hmm, it might be the HDD. Try to boot with -x or something.
Actually, I had that same error today, but I rebooted and it was gone.

on Lion 10.7.3 with ANV_kernel Patch + dyld + corocrypto.kext +TSCSyncAMD.kext+ I get Kernel Panic

I have used almost boot flag variants with sinetek_kernel and ANV_kernel.
I think it's the kernel. The last kernel of Sinetek has yet gone best see above
I need to install on the other partition Mountain Lion 10.8.2 then I'll try ANV_kernel.

PS: a nice video!

Edited by spakk, 21 December 2012 - 10:48 AM.

[Deltac0]

spakk, on 21 December 2012 - 09:55 AM, said:

on Lion 10.7.3 with ANV_kernel Patch + dyld + corocrypto.kext +TSCSyncAMD.kext+ I get Kernel Panic

I have used almost boot flag variants with sinetek_kernel and ANV_kernel.
I think it's the kernel. The last kernel of Sinetek has yet gone best see above
I need to install on the other partition Mountain Lion 10.8.2 then I'll try ANV_kernel.

PS: a nice video!

The Sinetek's latest kernel is for 10.6.8 SL. We have some successful boots with Phenom IIs here...
But I think it's the dyld. Nawcom's legacykernel without custom dyld gives same error as the Sinetek, only AnV kernel with custom dyld boots.

[spakk]

Deltac0, on 21 December 2012 - 11:26 AM, said:

The Sinetek's latest kernel is for 10.6.8 SL. We have some successful boots with Phenom IIs here...
But I think it's the dyld. Nawcom's legacykernel without custom dyld gives same error as the Sinetek, only AnV kernel with custom dyld boots.

I mean the last Sinetek Lion kernel with patch, I test not Snow Leopard.

I need help troubleshooting the problem with the AppleUSBOHCI to circumvent.

Edited by spakk, 21 December 2012 - 12:49 PM.

[Deltac0]

spakk, on 21 December 2012 - 12:42 PM, said:

I mean the last Sinetek Lion kernel with patch, I test not Snow Leopard.

I need help troubleshooting the problem with the AppleUSBOHCI to circumvent.

Sinetek made a Lion patch?!?

[spakk]

here my last Test with Sinetek Lion Kernel!!

Deltac0, on 21 December 2012 - 02:04 PM, said:

Sinetek made a Lion patch?!?

It's great to know that sinetek works one patch programmed to work around the problem. But You let me long testing, Deltac0

PS: the boot without maxmem =4096 - > the System resets and boot again.

[Sinetek]

Hi,

there has been an unprecedented demand for the patchset, so here it is,
http://www.sendspace.com/file/8x74vl

There are some parts missing, but the important bits for x86_64 should be in there.
Additionally, you will need to apply the patches for CPUID patching otherwise the famous hang after "Kernel is LP64" occurs.
More to come.

-- Sinetek

I knew I forgot something, here are the sources to the opcode emulator.
It might require more work...

http://www.sendspace.com/file/p5fz8o

[IiTz ShAnE]

@Sinetek, Any update for Athlon users?

[spakk]

I can boot LION 10.7.5  only with boot flag: sinetek -enable_ssse3emu cpus=1  -force64 maxmem=4096  -v -f
or with: sinetek -s
or with: sinetek cpus=1 arch=x86_64 usekernelcache=no -v -f
then it stops, but no kernel panic at:

BSD root: disk0s3, major 14, minor 3
jnl; unknown-dev: journal start / end pointers reset! (jnl 0x8716e60, s 0x25c800 e 0x25c800)


PS: Lion will not start, it always stops at the same agency. It should be noted that I do not have a kernel panic. The keyboard is fully   
   functional. This means it is waiting for any instructions, either an error in my settings or a missing driver, etc.

Edited by spakk, 22 December 2012 - 01:16 PM.

[Deltac0]

My test kernel: http://www.solidfile...m/d/f481beb48f/

10.7.4 Bronzonka Anv Sinetek patches compiled. x86_64 only.

[instant idiot]

Will test in a moment... Any special boot flags?

How positively surprising! It hangs at Kernel is LP64.

[Deltac0]

instant idiot, on 23 December 2012 - 12:30 AM, said:

Will test in a moment... Any special boot flags?

No idea, same what you would use with Sinetek SL kernel maybe. It's only x86_64 so arch=x86_64 -v would be a good start.
Will probably give instant reboot, get stuck @ kernel is lp64 or something else. It's just compiled from random bits of information and kept together with some black magic.
I'm very surprised it did even compile.

instant idiot, on 23 December 2012 - 12:30 AM, said:

Will test in a moment... Any special boot flags?

How positively surprising! It hangs at Kernel is LP64.

Could you come to IRC? We have interesting discussion @ there.

irc.osx86.hu, #LegacyKernel.



But it's cool to see it atleast booted from the bootloader


EDIT: Added diff as attachment, I think patch -p0 < test-kernel*.diff would work.

Attached Files

•  test-kernel-1699.26.8-deltac0-64bit-combined.diff.zip   1.2MB   25 downloads