206 replies to this topic

[Devout]

dlambert, on 04 June 2012 - 06:17 PM, said:

So I installed on my AMD x6 system, and I got SL (10.6) running then mounted and installed iAtkos L2. The install failed (towards the end), but I still added kernel and installed chameleon. But now the kexts load, but then the PC reboots. Any ideas? GTX 560 ti, 16GB ram, ASUS M4A87TD EVO.
Right before it reboots:

Also there is some stuff about SMBIOS is there

Should be able to boot without a DSDT.aml, just write "DSDT=Fake.aml" when entering verbose mode. Can you provide more of the log? Picture?

[dlambert]

I'm currently patching DSDT (after reinstall) Will post log if problem persists. Thank you.

[dlambert]

Okay, Got a little farther:

Recorded using phone,

[WARNING] /Extra/DSDT.aml not found
Using PCI-Root-UID value:0
nVidia Unknown NVce [10de:1200] :: PcriRoot(0x0)/Pci(0x2,0x0)
Found Smbios System Information Table 1
Customizing SystemID with : c04e001f-c600-0010-3de4-446d04210650
Patched DMI Table
ACPI Table not found: DSDT.aml
Starting Darwin x86

Then reboots

[Devout]

dlambert, on 04 June 2012 - 08:18 PM, said:

Okay, Got a little farther:

Recorded using phone,

[WARNING] /Extra/DSDT.aml not found
Using PCI-Root-UID value:0
nVidia Unknown NVce [10de:1200] :: PcriRoot(0x0)/Pci(0x2,0x0)
Found Smbios System Information Table 1
Customizing SystemID with : c04e001f-c600-0010-3de4-446d04210650
Patched DMI Table
ACPI Table not found: DSDT.aml
Starting Darwin x86

Then reboots

I wouldn't use a DSDT, I couldn't boot in when there was one. Also, did the reinstall finish correctly this time?

[gedna]

Hello

Cant get pass this line Waiting for DSMOS,
used Iatkos l2, from existing snow,
AMD Phenom 9600, i think its supported,

Can anyone help me?

used these lines -legacy -v arch=i386 npci=0x3000 -f
used V5 kernel

Attached Files

•  DSCN3483.JPG   1.78MB   44 downloads

[alaskantraveler]

Try: -legacy -v -f cpus=2 busratio=20 GraphicsEnabler=Yes PCIRootUID=0

leave off the npci= stuff

From my Chameleon Wizard:Chameleon 2.1svn (svn-r1957) [2012-05-13 13:53:36]
15.0
CPU: Brand String: AMD Athlon™ II X2 250 Processor
CPU: Vendor/Family/ExtFamily:  0x68747541/0xf/0x1
CPU: Model/ExtModel/Stepping:  0x6/0x0/0x2
CPU: MaxCoef/CurrCoef: 0x13/0x1e
CPU: MaxDiv/CurrDiv:    0x0/0x2
CPU: TSCFreq:   3008MHz
CPU: FSBFreq:   200MHz
CPU: CPUFreq:   3008MHz
CPU: NoCores/NoThreads:     2/2
CPU: Features: 0x0000024f

rd=*uuid -legacy cpus=2 busratio=20  -v -f GraphicsEnabler=Yes PCIRootUID=0

I'm using version 6, this will work with version 4.  32bit only, so far.

[theconnactic]

Updating to RAW's new kernel solved that anoying dependence on the dvd to boot.

Devout, you could update the list of working processors/motherboards, if you please.

[gedna]

alaskantraveler, on 05 June 2012 - 10:03 PM, said:

Try: -legacy -v -f cpus=2 busratio=20 GraphicsEnabler=Yes PCIRootUID=0

leave off the npci= stuff

From my Chameleon Wizard:Chameleon 2.1svn (svn-r1957) [2012-05-13 13:53:36]
15.0
CPU: Brand String: AMD Athlon™ II X2 250 Processor
CPU: Vendor/Family/ExtFamily:  0x68747541/0xf/0x1
CPU: Model/ExtModel/Stepping:  0x6/0x0/0x2
CPU: MaxCoef/CurrCoef: 0x13/0x1e
CPU: MaxDiv/CurrDiv:    0x0/0x2
CPU: TSCFreq:   3008MHz
CPU: FSBFreq:   200MHz
CPU: CPUFreq:   3008MHz
CPU: NoCores/NoThreads: 2/2
CPU: Features: 0x0000024f

rd=*uuid -legacy cpus=2 busratio=20  -v -f GraphicsEnabler=Yes PCIRootUID=0

I'm using version 6, this will work with version 4.  32bit only, so far.

Thank you for your replay, but the problem remains the same, no matter what bootloader i use, what line i write, im still stuck at waiting for DSMOS, i feel like im only one cant pass this crap...

[dlambert]

Devout, on 05 June 2012 - 01:37 AM, said:

I wouldn't use a DSDT, I couldn't boot in when there was one. Also, did the reinstall finish correctly this time?

O didn't install one. I tried the DSDT=fake.aml. No the installer failed again.

[Devout]

gedna, on 06 June 2012 - 07:31 AM, said:

Thank you for your replay, but the problem remains the same, no matter what bootloader i use, what line i write, im still stuck at waiting for DSMOS, i feel like im only one cant pass this crap...

If it works in version 4, maybe version 6 (revised) doesn't support your processor. I haven't used the latest kernels either.

dlambert, on 06 June 2012 - 03:38 PM, said:

O didn't install one. I tried the DSDT=fake.aml. No the installer failed again.

Show me the installer log for iATKOS L2.

[QuasaR78]

Confirmed:
CPU: AMD Phenom II X4 965
Mobo: Gigabyte GA-970A-UD3
Ram: 8GB
Graphics: Geforce 560TI not working yet
Network card buildin: Realtek RTL8168/8111 not working yet

32 bit Finder working

[gabrielayumi]

Working 100% in my Phenom II x4 965 3.4Ghz stock

M4a77T USB3.0 With Kext of USB from iatkos l2
AUDIO No Audio ( i forgot to install the kext )
VGA HD6870 Tested and i dont have QE/CI and Lion Recognize its a HD6xxx series with 1024Mb memory
ethernet realtek RTL816D
DVD SATA Optiarc Burning suport yes (sony dvd)
2x 4gb DDR3 1333mhz (Lion can see 8GB 2x 4gbDDR3 1333Mhz
later i'll make a video!

Greetins From Brazil!

Thanks!

[Devout]

gabrielayumi, on 18 June 2012 - 03:09 PM, said:

Working 100% in my Phenom II x4 965 3.4Ghz stock

M4a77T USB3.0 With Kext of USB from iatkos l2
AUDIO No Audio ( i forgot to install the kext )
VGA HD6870 Tested and i dont have QE/CI and Lion Recognize its a HD6xxx series with 1024Mb memory
ethernet realtek RTL816D
DVD SATA Optiarc Burning suport yes (sony dvd)
2x 4gb DDR3 1333mhz (Lion can see 8GB 2x 4gbDDR3 1333Mhz
later i'll make a video!

Greetins From Brazil!

Thanks!

Try this for QE/CI: http://www.osx86.net...do=file&id=1257

[gabrielayumi]

Devout, on 18 June 2012 - 03:23 PM, said:

Try this for QE/CI: http://www.osx86.net...do=file&id=1257

QE/CI Fixed Thanks Sir! Excellent guide!

Edited by gabrielayumi, 18 June 2012 - 09:22 PM.

[gabrielayumi]

I have one Wi-Fi PCI-Card D-Link DWA-525 i think its a Ralink 3060 and how i can change the chameleon boot plist to don't need to write -legacy PCIRoootUID=1 every time? thanks sir

[Devout]

gabrielayumi, on 18 June 2012 - 09:22 PM, said:

I have one Wi-Fi PCI-Card D-Link DWA-525 i think its a Ralink 3060 and how i can change the chameleon boot plist to don't need to write -legacy PCIRoootUID=1 every time? thanks sir

Can you upload your Cham boot file and I'll add it in for you just put it in the <string></string> for Kernel Flags

[gabrielayumi]

Devout, on 21 June 2012 - 07:05 PM, said:

Can you upload your Cham boot file and I'll add it in for you just put it in the <string></string> for Kernel Flags

Is here... Thanks http://www.4shared.c...meleonBoot.html

[new2hacintosh]

QuasaR78, on 13 June 2012 - 10:09 PM, said:

Confirmed:
CPU: AMD Phenom II X4 965
Mobo: Gigabyte GA-970A-UD3
Ram: 8GB
Graphics: Geforce 560TI not working yet
Network card buildin: Realtek RTL8168/8111 not working yet

32 bit Finder working

If you still cannot get you ethernet to work try the driver on this site's Network page.  It has worked for me on my Gigabyte 970A-UD3 board also.  The site that I linked to in the sentence above also shows how the Niresh 10.7.3 V2 version was installed onto the same board with little to no problems!!! Check out its Niresh Success page.  Which video driver did you choose during your install??  There should have been an NVidia choice inside the "Customize" menu.

[new2hacintosh]

I am having a GIGANTIC problem.  I followed your guide and the install worked perferctly...Kudos to you!!!  My issue is with not having finder working at all.  Since it is not working I cannot get to any folders(of course) and cannot install any drivers.  I partitioned the drive with the "old" drive labeled Snow and the second partition labeled iAtkos.  Even when I boot into Snow and install the ethernet driver onto the iAtkos partiton, then boot into iAtkos...I don't have ethernet due to the fact that the network "program" wants me to set it up via dhcp or manual or however.  Before I can do any of this it's window closes, erroring out.  I have tried placing mucommander and Xfolders into the applications folder but I can't even see the Applications folder in the iAtkos partition to try to install it. I have read posts in this forum explaining that the finder or some program in "DP2" is used instead but is that referring to the finder in Mountain Lions Dev 2 or what exactly is that referring to and how do I get to it/download it for install into my iAtkos partition.

[spidy86]

hi i tried your guide...i had a working sl 10.6.8 with chameleon bootloader + legacy kernel
and plist with description:

<key>Kernel</key>
<string>legacy_kernel</string>
<key>Kernel Flags</key>
<string>arch=i386</string>
<key>Theme</key>
<string>LoginToLion</string>
<key>Rename Partition</key>
<string>"System Reserved" Windows-8</string>
<key>Boot Banner</key>
<string>No</string>

Step 1. now as per guide i installed iatkosL2 and replaced mach_kernel with Brazonka's-v4 made the new kernel invisible, replaced finder

now i allready have chamleon installed so i didnt touched it
and tried passing: -legacy -v arch=i386 npci=0x2000 and once with npci=0x3000
                               -legacy usekernelcache=no -v -f

chameleon gave "cant find legacy_kernel"

Step 2. changed legcay_kernel to mach_kernel
             tried to boot lion with -v but restarts saying starting mac os

can anyone tell me what do i need to do?