485 replies to this topic

[DarwinX]

You could try rolling back to the Snow Leopard's AppleACPIPlatform.kext v1.3.5 as well as setting the hibernate mode to 0 via the following terminal command:

sudo pmset -a hibernatemode 0

Do not forget to rebuild the system caches.

 AppleACPIPlatform.kext.zip   406.84K   55 downloads

[coscos]

Just tried this, still the same: black screen after waken up.

Do I also need to patch AppleRTC by doing this?

[ugokind]

well.. is it good to show battery infos in the asus hp laptops?

[LatinMcG]

coscos, on 15 February 2012 - 05:06 PM, said:

I recently was trying to fix the sleep/wake issue on my hackintosh, and need some help. My hackintosh has a gigabyte p35-ds3l, Sapphire Radeon HD5770. Running 10.7.2, everything is good except wake up.

After the machine sleeps properly, when it is woke up by keyboard or power button, it goes to black screen directly. The power is on, fans spinning, but no output to screen. I tried to ping it from another machine, but no response. Clearly the NIC was not brought up either.

I’ve tried patching AppleRTC file, using SleepEnabler, set darkwake to 0, using official RTL8111B or Lnx2mac network card drivers, but none of them works (all black screen)

Now I'm stucked. Any suggestion?

remove sleep enabler and make sure EHCI and USBx is patched in dsdt with device ids as u have ich9 right ?

[coscos]

I already removed sleep enabler ...

As to patching EHCI & USBx, can you be more Specific about how to do it? I'm new to this. Thanks!

By the way, I aw able to sleep and wake up under 10.6.8 ...

[psycmos]

Thkz a lot!!! i used the second method , patch via terminal, and works well on GA P41T-D3P, 10.7.3 Sleep/wakeup/restart without cmos error!!! Very Very thkz...

[ApexDE]

rayap, on 03 February 2012 - 12:02 PM, said:

The AppleRTC executable file appears to remain unchanged in 10.7.3. However revisiting the perl script in post#340; found the following on a kext copy in Extra is sufficient:-

sudo perl -pi -e 's|\x75\x30\x44\x89\xf8|\xeb\x30\x44\x89\xf8|' /Extra/Extensions/AppleRTC.kext/Contents/MacOS/AppleRTC

Is it possible that your new smaller patch doesn't patch the 32bit part of the kext? After booting in 32bit kernel, i got a cmos reset again.

[rayap]

ApexDE, on 25 February 2012 - 09:39 AM, said:

Is it possible that your new smaller patch doesn't patch the 32bit part of the kext? After booting in 32bit kernel, i got a cmos reset again.

Thanks mate. That must be it.

[redshot]

Hello, I used the patch and there is no CMOS reset anymore, but I still get a black screen upon waking up. Tried to disable hibernation, darkewake=0, but still no avail, and nothing is mentioned on the logs.

Using 10.7.3, sleepenabler, on an Asus A3f laptop.

[DarwinX]

redshot, on 30 March 2012 - 08:35 AM, said:

Hello, I used the patch and there is no CMOS reset anymore, but I still get a black screen upon waking up. Tried to disable hibernation, darkewake=0, but still no avail, and nothing is mentioned on the logs.

Using 10.7.3, sleepenabler, on an Asus A3f laptop.

Roll back the OS X Lion's AppleACPIPlatform.kext v.1.4.0 to the Snow Leopard's AppleACPIPlatform.kext v.1.3.5.
Ensure to rebuild the kernelcache.

 AppleACPIPlatform.kext.zip   407.18K   31 downloads

[LatinMcG]

redshot, on 30 March 2012 - 08:35 AM, said:

Hello, I used the patch and there is no CMOS reset anymore, but I still get a black screen upon waking up. Tried to disable hibernation, darkewake=0, but still no avail, and nothing is mentioned on the logs.

Using 10.7.3, sleepenabler, on an Asus A3f laptop.

try DarkWake=1

[redshot]

DarwinX, on 30 March 2012 - 02:24 PM, said:

Roll back the OS X Lion's AppleACPIPlatform.kext v.1.4.0 to the Snow Leopard's AppleACPIPlatform.kext v.1.3.5.
Ensure to rebuild the kernelcache.

AppleACPIPlatform.kext.zip

LatinMcG, on 30 March 2012 - 04:35 PM, said:

try DarkWake=1

Thanks, but still no change. Goes to sleep, never wakes up, or logs any error. Interesting that after I pull the plug to shut it down, when I plug it in again, it turns itself on automatically.

[ApexDE]

10.7.4 comes with a new AppleRTC.kext. Does the old patch still work?

[rayap]

ApexDE, on 10 May 2012 - 11:35 AM, said:

10.7.4 comes with a new AppleRTC.kext. Does the old patch still work?

Just do it.
Looks like the Lion AppleRTC.kext v1.5 is more like its predecessor, unlike the ML(DP1) AppleRTC.kext v1.5 a bit different.

[OonihiloO]

rayap, on 10 May 2012 - 05:02 PM, said:

Just do it.
Looks like the Lion AppleRTC.kext v1.5 is more like its predecessor, unlike the ML AppleRTC.kext v1.5 a bit different.

I've just done it...
And it works !!!
Used the last patch proposed in first post :

rayap, on 04 April 2011 - 06:43 AM, said:

Added 10th day of July, 2011
An alternate patch for AppleRTC.kext of Lion GM. (Post # 340)

sudo perl -pi -e 's|\x75\x30\x44\x89\xf8|\xeb\x30\x44\x89\xf8|; s|\x75\x3d\x8b\x75\x08|\xeb\x3d\x8b\x75\x08|' /System/Library/Extensions/AppleRTC.kext/Contents/MacOS/AppleRTC

[fredouille]

OonihiloO, on 10 May 2012 - 06:08 PM, said:

I've just done it...
And it works !!!
Used the last patch proposed in first post :

well not for everyone ... unfortunately !
can someone send the applertc.kext from 10.7.3 please ?

EDIT : my bad, i forgot to "onyx" before rebooting... after deleting boot cache and repairing permissions with onyx app, everythings works as expected !
Thangs again to everyone

[EnzoFX]

10.7.4 brought this back for me, off to try the same old patch.

Edit: Worked after repairing perms =P.

[mitch_de]

I never had any probs with sleep/wakeup for looong time.
But now, with 10.7.4 i get an reboot after wakeup (from working sleep). No CMOS reset because i use that patched AppleRTC - but now the wakeup = rebbot problem.
Which other .kext maybe the reason for that? (i use C2D/Gigabyte G35)

[DarwinX]

mitch_de, on 20 May 2012 - 09:14 PM, said:

I never had any probs with sleep/wakeup for looong time.
But now, with 10.7.4 i get an reboot after wakeup (from working sleep). No CMOS reset because i use that patched AppleRTC - but now the wakeup = rebbot problem.
Which other .kext maybe the reason for that? (i use C2D/Gigabyte G35)

Possibly, the AppleACPIPlatform.kext v1.5. Try this one:

 AppleACPIPlatform.kext v1.3.5.zip   407.18K   26 downloads

[mitch_de]

No changes using AppleACPI V 1.3.5
I know that newer Chameleon has some internal RESTARTFIX, which is enabled by default - i will try so disable it for an test (RestartFIX=No).