45 replies to this topic

[albert E]

DarwinX, on May 12 2011, 08:17 AM, said:

Chameleon v2.0-RC5 for LION and Snow Leopard

This link is a better implementation: http://www.insanelym...howtopic=256729

[Motawa]

DP1 Works just fine but the 2 doesn't. I always get this when i try to install:


system:
asus P5b
Intel Core 2 Quad Q8400
ATI 5750(tried also with 7800gt)
4gb ddr2 ram.

http://img841.images...i/bild0065.jpg/

[kyndder]

Motawa, on May 16 2011, 01:44 PM, said:

DP1 Works just fine but the 2 doesn't. I always get this when i try to install:


system:
asus P5b
Intel Core 2 Quad Q8400
ATI 5750(tried also with 7800gt)
4gb ddr2 ram.

http://img841.images...i/bild0065.jpg/

http://www.insanelym...howtopic=257192

[albert E]

x64bitdimension, on Mar 30 2011, 06:47 PM, said:

hello guys, I wanted to ask aid is involved if possible. The problem is when i start the bootloader from USB device,  XPC (0.82) and iBoot (1.4a) will not start. I've tested two USB drives, FAT 32 formatted MBR, then installed Boot XPC prepared, or even iBoot by the utility in Windows (I also added on, my and several other DSDT, and some kext which included fakeSMC). When I boot from USB-HDD there is "MBR start", and after black screen, the USB does not load and nothing happens. But if I connect the HDMI port the screen says "loading GUI, please wait. " now, what do you think? I also tried with U, D or W key but nothing change!  http://img27.imagesh...pict0002sg.jpg/  Sorry for my English.

  
I have so much problem with XPC and iBoot; I've tried everything.Use this instead by LifeRice:
GUYS FOLLOW THESE STEPS: http://3rr0rists.net...lion-on-pc.html

IT's EASIER

[SauloMartins]

LifeOnRice, on Mar 5 2011, 04:25 PM, said:

MADE BY DEETOX:

So… I have a Lion working with the following :


- XPC
- NVEnabler (for dual boot on 9800 GTX)
- FakeSMC v.1.0.

What I did :

I used a preconfigured XPC found on applelife.

All files are available here : http://www.fileserve.com/file/MSEcs5H

USB Preparation :

1 – Use “XPC Boot Prepare Tool” to make usb dongle bootable (WARNING : choose the good usb dongle in installer)
2 – Put “bootdisk” content in the usb dongle
3 – Copy my dsdt.aml in efi/xpc in the dongle

Install Preparation (same as usr-sse2 (thank you again)) :

1 – Mount 10.7 image
2 – Found a finder that allow you to show hidden files
3 – Restore “BaseSystem.dmg” (hidden file) from install disk to an external usb drive
4 – Remove “Packages” alias from System/Installation on the usb drive
5 – copy /Packages from 10.7 image to /System/Installation in external usb drive
6 – copy kexts folder from workingxpc to / in external usb drive

Boot :
1 – Boot usb key (it is preconfigured so you do not have to change anything in config ^^)
2 – choose the usb drive where you put BaseSystem.dmg
3 – when the command line prompt, type :
/sbin/mount -uw /
chown -R root:wheel /kexts/FakeSMC.kext
kextload /kexts/FakeSMC.kext
exit
4 – After exit, lion install should start !

Installation :
You are now in Lion Install so follow the steps.

After Installation :
When you reboot after install, you must type in command :
kextload /kexts/FakeSMC.kext
exit

When desktop come, as usr-sse2 said, copy /kexts/FakeSMC.kext to /System/Library/Extensions (to load it after next reboot without command).

After configuration, you can type “M” in XPC to remove -v -s options.

Alright, sorry again for my bad english : I am french  But I hope this help !
I DO NOT TAKE CREDIT FOR THIS: MADE BY DEETOX at NETKAS.org

NEED TESTERS

Hello, can you help me?
I want to install Mac OS on my Sony Vaio Too!

Please help me if you can!

Here goes my hardware:


Notebook Sony Vaio VPCF111FX/B
Intel Core i7 720-QM 1.60ghz - 2.80ghz,
4GB DDR3 1333MHZ,
HD Sata 500GB,
Blu-ray + DVD-RW,
Tela 16.4" WXGA 1600 x 900,
GeForce 310M 512MB DEDICADA,
HDMI, E-sata, Bluetooth, Wireless, IEEE 1394, Windows 7 Home Premium 64 Bits, Leitor de cartões, Webcam


I'm waiting for a answer!
Tks!

[tommix1968]

Hi...

while DP3 is running like a charm (installed from USB created from several howtos), i cant install DP4 in the same way:

USB booted up, i can select the language (choose german of course), after the installer thinking for a while it tells me i can´t install this version on my computer.

What i did:

• follow the howto´s (Restore Base....dmg etc.)
  
• installed chameleon RC5 on the USB
  
• put the fakesmc.kext into S/L/E
  
• netkas boot into /
  
• tryed with boot.efi in /
  
• my DSDT in /E
  
• boot with -arch=i386 -v

Anyone with similar problems and solved this?

Used the Guide from Sticky which says to replace OSinstall.pkg and this worked.

Regards

Tommix