Asus P5N7A-VM

Hugo_bee · April 6, 2009

hey!

thanks to you now i've a stable boot..

but after loading kexts (chameleon 2 rc1) it give me every time a

pause 5 second for boot problems and afret a lot of decrypt messages!!!

i'll post my log.. please if anyone could answer to me.. i'll be great!

audio is working (ext spk, mic in, hp)

video nvkush work and detecd my lcd screen (75kHZ)

sometime a freeze (yesterday 2 times) when i've opened a dozen of dmg, have forefox opened, 6-7 windows opened and injected a wifi usb pen in the usb!

SORRY.. another question..

i an't have 1900x of display res..

i used nvkush.. and ok.. i'm QE/CI

but the res limit depend on what monitor it detects??

Ayla · April 6, 2009

Diabolik

Your setup is "rock solid" you say, no crashes etc.

Could you please tell me the exact model number of the RAM you use?

Then I will buy the same RAM for my next build with this motherboard.

Thanks

Martin

General_Cartman · April 6, 2009

I haven't been able to get sleep or shutdown working on this board either. And correct me if I'm wrong, but I'm pretty sure the orange icon issue is something you'll experience with any hackintosh. Just give your hard drives custom icons or the default internal icons and they'll always stay that way, unless you erase or repartition them. I installed an orange icon fix when I first installed OS X on mine, but my transfer speeds became horrible.

Sleep and Shutdown don't work when you install an external video card, and/or a PCI card in PCI slot 2 Take it out and use the iGPU and you will get sleep and shutdown.

DiaboliK · April 6, 2009

Diabolik

Your setup is "rock solid" you say, no crashes etc.

Could you please tell me the exact model number of the RAM you use?

Then I will buy the same RAM for my next build with this motherboard.

Thanks

Martin

rock solid, {censored} even better, more solid than diamonds.

this is the ram i run: http://www.newegg.com/Product/Product.aspx...N82E16820144074

this ram will work fine: http://www.newegg.com/Product/Product.aspx...N82E16820144240

word of advice, always follow the qvl for the appropriate ram : Asus P5N7A-VM RAM QVL

-D-

Hugo_bee · April 6, 2009

hello

i'd like to exibit my boot log.. in order to verify with you if somethings can be improved

bye

Apr  5 23:53:31 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/chum.plist
Apr  5 23:53:31 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
Apr  5 23:53:31 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/pilotfish.plist
Apr  5 23:53:31 localhost com.apple.launchd[1] (com.apple.blued): Unknown key for boolean: EnableTransactions
Apr  5 23:53:31 localhost com.apple.launchd[1] (com.apple.distccdConfigd): Unknown key: SHAuthorizationRight
Apr  5 23:53:31 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
Apr  5 23:53:31 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
Apr  5 23:53:31 localhost kernel[0]: 790	AppleUSBHub[0x6ac4200]::start -  USB Generic Hub @ 1 (0x26000000)
Apr  5 23:53:31 localhost DirectoryService[11]: Launched version 5.6 (v514.24)
Apr  5 23:53:31 localhost kernel[0]: Extension "com.jmicron.JMicronATA" has no explicit kernel dependency; using version 6.0.
Apr  5 23:53:31 localhost DirectoryService[11]: Improper shutdown detected
Apr  5 23:53:31 localhost kernel[0]: HDAEnabler: 05/05/2008 Added SPAudio support:Taruga
Apr  5 23:53:31 localhost kernel[0]: [JMicronATA] JMicronATAPCIRoot start
Apr  5 23:53:31 localhost kernel[0]: [JMicronATA] JMicronATAPCIRoot saveHwRegisters
Apr  5 23:53:31 localhost kernel[0]: USBF:	0.834	AppleUSBHub[0x6ae8e00]::start -  USB Generic Hub @ 1 (0x4000000)[JMicronATA]   BMBaseAddr = e400
Apr  5 23:53:31 localhost kernel[0]: [JMicronATA] _tfDataReg 13a
Apr  5 23:53:31 localhost kernel[0]: [JMicronATA] _tfFeatureReg 1
Apr  5 23:53:31 localhost kernel[0]: [JMicronATA] _tfSCountReg 1
Apr  5 23:53:31 localhost kernel[0]: [JMicronATA] _tfSectorNReg 1
Apr  5 23:53:31 localhost kernel[0]: [JMicronATA] _tfCylLoReg 14
Apr  5 23:53:31 localhost kernel[0]: [JMicronATA] _tfCylHiReg eb
Apr  5 23:53:31 localhost kernel[0]: [JMicronATA] _tfSDHReg a0
Apr  5 23:53:31 localhost kernel[0]: [JMicronATA]   BMBaseAddr = e408
Apr  5 23:53:31 localhost kernel[0]: [JMicronATA] _tfDataReg 0
Apr  5 23:53:31 localhost kernel[0]: [JMicronATA] _tfFeatureReg 0
Apr  5 23:53:31 localhost kernel[0]: [JMicronATA] _tfSCountReg 0
Apr  5 23:53:31 localhost kernel[0]: [JMicronATA] _tfSectorNReg 0
Apr  5 23:53:31 localhost kernel[0]: [JMicronATA] _tfCylLoReg 0
Apr  5 23:53:31 localhost kernel[0]: [JMicronATA] _tfCylHiReg 0
Apr  5 23:53:31 localhost kernel[0]: [JMicronATA] _tfSDHReg 0
Apr  5 23:53:31 localhost kernel[0]: [JMicronATA] JMicronATA::scanForDrives( 0x6ae8400 )
Apr  5 23:53:31 localhost kernel[0]: [JMicronATA] Bus is ready for scan
Apr  5 23:53:31 localhost kernel[0]: [JMicronATA] JMicronATA::scanForDrives( 0x6ae8200 )
Apr  5 23:53:31 localhost kernel[0]: [JMicronATA] Bus is ready for scan
Apr  5 23:53:31 localhost kernel[0]: [JMicronATA] Unit 0, bus is ready for scan
Apr  5 23:53:31 localhost kernel[0]: [JMicronATA] ATAPI regs _tfCylLoReg 14[JMicronATA] _tfCylHiReg eb
Apr  5 23:53:31 localhost kernel[0]: [JMicronATA] Unit 0, bus is ready for scan
Apr  5 23:53:31 localhost kernel[0]: [JMicronATA] ATAPI regs _tfCylLoReg 0[JMicronATA] _tfCylHiReg 0
[b]Apr  5 23:53:31 localhost kernel[0]: [JMicronATA] Unknown device[/b]
Apr  5 23:53:31 localhost kernel[0]: [JMicronATA] Unit 1, bus is ready for scan
Apr  5 23:53:31 localhost kernel[0]: [JMicronATA] ATAPI regs _tfCylLoReg 0[JMicronATA] _tfCylHiReg 0
[b]Apr  5 23:53:31 localhost kernel[0]: [JMicronATA] Unknown device[/b]
Apr  5 23:53:31 localhost kernel[0]: [JMicronATA] Unit 1, bus is ready for scan
Apr  5 23:53:31 localhost kernel[0]: [JMicronATA] ATAPI regs _tfCylLoReg 0[JMicronATA] _tfCylHiReg 0
[b]Apr  5 23:53:31 localhost kernel[0]: [JMicronATA] Unknown device[/b]
Apr  5 23:53:31 localhost kernel[0]: JMicronATA: JMB368 (CMD 0xe800, CTR 0xe480, IRQ 19, BM 0xe408)
Apr  5 23:53:31 localhost kernel[0]: JMicronATA: JMB368 (CMD 0xec00, CTR 0xe880, IRQ 19, BM 0xe400)
Apr  5 23:53:31 localhost kernel[0]: [JMicronATA]   PIO mode 0 @ 600 ns
Apr  5 23:53:31 localhost kernel[0]: [JMicronATA]   selected PIO timing entry 4
Apr  5 23:53:32 localhost kernel[0]: [JMicronATA]   selected Ultra mode 2
Apr  5 23:53:32 localhost kernel[0]: [JMicronATA]   PIO mode 4 @ 120 ns
Apr  5 23:53:32 localhost kernel[0]: [JMicronATA]   Ultra mode 2
Apr  5 23:53:32 localhost kernel[0]: Extension "com.apple.driver.iTunesPhoneDriver" has no explicit kernel dependency; using version 6.0.
Apr  5 23:53:32 localhost kernel[0]: [ProcessEventData] kBluetoothHCIEventHardwareError occurred, status = 0x37
Apr  5 23:53:32 localhost kernel[0]: [HCIController][configurePM] power parent ready after 1 tries
Apr  5 23:53:32 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/EHC1@4,1/AppleUSBEHCI/little disk@24500000/MSC Bulk-Only Transfer@0/IOUSBMassStorageClass/IOSCSIPeripheralDeviceNub/IOSCSIPeripheralDeviceType00/IOBlockStorageServices/IOBlockStorageDriver/SAMSUNG HM500LI Media/IOFDiskPartitionScheme/Untitled 1@1
Apr  5 23:53:32 localhost kernel[0]: BSD root: disk1s1, major 14, minor 5
Apr  5 23:53:32 localhost kernel[0]: USBF:	5.765	AppleUSBHub[0x6d75e00]::start -  USB Generic Hub @ 1 (0x6000000)
Apr  5 23:53:32 localhost kernel[0]: USBF:	6. 72	[0x6d77100] USB HID Interface #0 of device USB Receiver @ 2 (0x6300000)
Apr  5 23:53:32 localhost kernel[0]: Jettisoning kernel linker.
Apr  5 23:53:32 localhost kernel[0]: NVEthernet: Ethernet address 00:23:54:9c:01:7d
Apr  5 23:53:32 localhost kernel[0]: Resetting IOCatalogue.
Apr  5 23:53:32 localhost kextd[10]: 0 cached, 417 uncached personalities to catalog
Apr  5 23:53:33 localhost mDNSResponder mDNSResponder-176.3 (Sep 30 2008 16:59:38)[16]: starting
Apr  5 23:53:33 localhost mDNSResponder[16]: mDNS_SetSecretForDomain: ERROR: Could not convert shared secret from base64: domain dyndns.org. key xcortese@gmail.com. 
Apr  5 23:53:34 localhost kernel[0]: IGPU: family specific matching fails
Apr  5 23:53:34 localhost kernel[0]: Matching service count = 1
Apr  5 23:53:34 localhost kernel[0]: Matching service count = 2
Apr  5 23:53:34: --- last message repeated 4 times ---
Apr  5 23:53:34 localhost kernel[0]: USBF:	11.141	[0x72f6900] USB HID Interface #0 of device USB Receiver @ 3 (0x4300000)USBF:	11.141	[0x73e4200] USB HID Interface #1 of device USB Receiver @ 2 (0x6300000)
Apr  5 23:53:34 localhost kernel[0]: NVEthernet::mediaChanged - Link Down
Apr  5 23:53:34 localhost kernel[0]: NVDANV50HAL loaded and registered.
Apr  5 23:53:34 localhost kernel[0]: IGPU: family specific matching fails
Apr  5 23:53:34 Medardo-2 configd[14]: setting hostname to "Medardo-2.local"
[b]Apr  5 23:53:34 Medardo-2 kernel[0]: IGPU: family specific matching fails[/b]
Apr  5 23:53:34 Medardo-2 mDNSResponder[16]: mDNS_SetSecretForDomain: ERROR: Could not convert shared secret from base64: domain dyndns.org. key xcortese@gmail.com. 
[b]Apr  5 23:53:34 Medardo-2 kernel[0]: IGPU: family specific matching fails[/b]
Apr  5 23:53:34 Medardo-2 kernel[0]: HDAEnabler: Copyright (c) 2008 by Kabyl
Apr  5 23:53:34 Medardo-2 kernel[0]: HDAEnabler: 05/05/2008 Added SPAudio support:Taruga
Apr  5 23:53:34 Medardo-2 kernel[0]: HDAEnabler: Copyright (c) 2008 by Kabyl
Apr  5 23:53:34 Medardo-2 kernel[0]: HDAEnabler: 05/05/2008 Added SPAudio support:Taruga
[b]Apr  5 23:53:34 Medardo-2 kernel[0]: IGPU: family specific matching fails[/b]
Apr  5 23:53:34 Medardo-2 kernel[0]: ------------------------------
Apr  5 23:53:34 Medardo-2 kernel[0]: NVKush: By DiaboliK
Apr  5 23:53:34 Medardo-2 kernel[0]: NVKush: I Can Has Model? Detected
Apr  5 23:53:34 Medardo-2 kernel[0]: NVkush: a DiaboliK Joint
Apr  5 23:53:34 Medardo-2 kernel[0]: ------------------------------
Apr  5 23:53:35 Medardo-2 kernel[0]: Matching service count = 0
Apr  5 23:53:36 Medardo-2 kernel[0]: NVEthernet::mediaChanged - Link Up: Ctrl 1140, Adv 0de1-0200, Lpa 45e1-0000 Autoneg capable 1
Apr  5 23:53:36 Medardo-2 mDNSResponder[16]: mDNS_SetSecretForDomain: ERROR: Could not convert shared secret from base64: domain dyndns.org. 
Apr  5 23:53:38 Medardo-2 bootlog[66]: BOOT_TIME: 1238968403 0
Apr  5 23:53:38 Medardo-2 rpc.statd[50]: statd.notify - no notifications needed
Apr  5 23:53:39 Medardo-2 kernel[0]: ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out
Apr  5 23:53:39 Medardo-2 fseventsd[58]: bumping event counter to: 0xcb4d3c0e (current 0x0) from log file '00000000cb4d2989'
Apr  5 23:53:39 Medardo-2 com.apple.launchd[1] (com.apple.distccdConfigd[62]): Exited with exit code: 255
[b]Apr  5 23:53:42 Medardo-2 kernel[0]: AppleDecrypt: page_transform: in_blk = 0x54fa9000, out_blk = 0x54faa000[/b]

DiaboliK · April 6, 2009

hello
i'd like to exibit my boot log.. in order to verify with you if somethings can be improved

bye

by the looks of it you can remove the following: nvkush and the 2 hdaenablers. theres one inside the plugins of the applehda.kext and one that lives outside. (no reason to have either if its injected thru dsdt)

-D-

ImDunn · April 7, 2009

rock solid, {censored} even better, more solid than diamonds.

this is the ram i run: http://www.newegg.com/Product/Product.aspx...N82E16820144074

this ram will work fine: http://www.newegg.com/Product/Product.aspx...N82E16820144240

word of advice, always follow the qvl for the appropriate ram : Asus P5N7A-VM RAM QVL

-D-

Thanks for the RAM info...

How about the kexts you are running, Uinstaller with essential kexts? Audio kexts, which? What version of DSDT (yours, feb 16?). BIOS version, still 4.07? BIOS settings? Vanilla kernal, voodoo? Any post install scripts? The use of -f in com.apple.boot.plist, etc.

I just want mine to be as rock solid as yours.

DiaboliK · April 7, 2009

Thanks for the RAM info...

How about the kexts you are running, Uinstaller with essential kexts? Audio kexts, which? What version of DSDT (yours, feb 16?). BIOS version, still 4.07? BIOS settings? Vanilla kernal, voodoo? Any post install scripts? The use of -f in com.apple.boot.plist, etc.

I just want mine to be as rock solid as yours.

that is is so heres the list:

disabler.kext for disabling userupstreamclient.kext

frodokenny's first applehda.kext w/ hdaenablers ripped out

smbiosresolver.kext set for macbookpro5,1

slightly modified version of my feb 16th dsdt. (has hda enabler and gfx injection in dsdt)

voodoo kernel

i also run a bootloader that runs -f always w/o being set in the boot.plist

as for bios settings, i have my iGPU oc set and i have legacy usb disabled, the rest is basically default.

that is it. like i said a long time ago, its not that hard to get this board running perfectly.

-D-

FrodoKenny · April 8, 2009

FrodoKenny,

I used Uinstaller to install the kexts in my system with the new DSDT and didn't pay proper attention. Later I saw I failed to remove NVkush. Maybe that did it. I was careless in my updating and in trying to get back to a stable system, which made things worse.

If you want to add a warning, maybe something like: Pay attention and read. Don't be like me(Eastwind).

Should be ok then

FrodoKenny -

What happened to your great post about DSDT?

Also having trouble with sleep and proper shutdown on this end...

Can you let us know what hardware you are using...keyboard, mouse, SATA drives?

What BIOS, Kexts? Vanilla, retail, installed from real mac or hack?

All my installs, and I mean many, have resulted in Orange HD Icons, using -f in the plist to boot and lack of sleep (both the computer and me) and shutdown that results in the computer shutting down but the fans keep running.

Post is still there... #355...

I have a relatively plain system:

Asus P5N7A-VM mainboard, Intel Pentium Dual Core E2200, Kingston ValueRam Dual Channel 2 GB PC6400, 800 MHz 5 Kit Of 2, SATA hd and one PCI slot occupied with a supported Broadcom based WLAN card.

This is what I use for a clean install:

BIOS: v0407, set SATA to AHCI, USB 2.0 to FullSpeed

Boot loader: EFIv9 or Chameleon 2.0

ACPI fixes: dsdt.aml (post #355)

Decrypter in /Extra: AppleDecrypt.kext or dsmos.kext

Kexts in /Extra: LegacyAppleAHCIPort.kext, LegacyIOAHCIBlockStorage.kext, LegacyAppleLPC.kext (post #355)

Kexts in /S/L/E: LegacyAppleHDAController.kext, LegacyAppleHDAPlatformDriver.kext, AppleHDA.kext (post #364)

That's all! No need for HDAEnabler, Disabler, NVKush or any of that.

I use a 10.5.6 retail DVD to install:

1. Restore the 10.5.6 retail dvd image to a partition <partition>.

2. Install the boot loader

3. Place dsdt.aml in root of partition or <partition>/Extra depending on boot loader

4. Place kexts in <partition>/Extra

5. Create kextcache: sudo kextcache -m <partition>/Extra/Extensions.mkext <partition>/Extra/Extensions/

6. Place kexts in <partition>/System/Library/Extensions

7. Make sure the kextcache rebuilts: sudo touch <partition>/System/Library/Extensions

8. Reboot, install and repeat for the installed version!

As DiaboliK my system is rock solid, no problems at all. Also work fine, booting without -f is you're done messing with the kexts.

Orange icons should be resolved by LegacyIOAHCIBlockStorage.kext as you can find anywhere on insanelymac. If they are still orange, it means it is not loading!

Hugo_bee · April 8, 2009

excuse me

i've done all the steps.. the system boots fine in 17 seconds.. it's stable..quickly.. i'm so happy

but

1: shall I remove really nvkush?

2: why every memory stick or usb drive or usb sata drive doesn't want to run? in the system.log I never see activities!!

..

and as diabolik wrote.. i've removed hdaenabler.

Hugo_bee · April 9, 2009

ok

everything is ok

BIOS: v0407, set SATA to AHCI, USB 2.0 to FullSpeed
Boot loader: EFIv9 or Chameleon 2.0

ACPI fixes: dsdt.aml (post #355)

Kexts in /Extra: LegacyAppleAHCIPort.kext, LegacyIOAHCIBlockStorage.kext, LegacyAppleLPC.kext (post #355)

Kexts in /S/L/E: LegacyAppleHDAController.kext, LegacyAppleHDAPlatformDriver.kext, AppleHDA.kext (post #364)

That's all! No need for HDAEnabler, Disabler, NVKush or any of that.

I use a 10.5.6 retail DVD to install:

1. Restore the 10.5.6 retail dvd image to a partition <partition>.

2. Install the boot loader

3. Place dsdt.aml in root of partition or <partition>/Extra depending on boot loader

4. Place kexts in <partition>/Extra

5. Create kextcache: sudo kextcache -m <partition>/Extra/Extensions.mkext <partition>/Extra/Extensions/

6. Place kexts in <partition>/System/Library/Extensions

7. Make sure the kextcache rebuilts: sudo touch <partition>/System/Library/Extensions

8. Reboot, install and repeat for the installed version!

but

i've tried without openhaltrestart

without disabler

without appledecrypt

and it arrives to the end of loading services but don't start windowserver

if i put those three kexts in E/E and recreate extensions.mkext in /E

it starts

then i'm writing with the 1st start with those 3.. and i still don't know if they are needed all 3 or only 1 or 2 ot them.

confirm that I have QE/CI without any sort of injector!! VERY GOOD!

to have hda working i must restart 2 times from the 1st setup.. then always good!

FrodoKenny · April 9, 2009

ok
everything is ok

but

i've tried without openhaltrestart

without disabler

without appledecrypt

and it arrives to the end of loading services but don't start windowserver

...

You're right. You still need a decrypter such as AppleDecrypt or dsmos. Sorry about that. I'll edit the post. The other two I don't use.

Hugo_bee · April 9, 2009

ok.. i've added news.. i'm right with you.

i've a good stable and very fast boot.

the only issue is the ehci. i've made bios settings like in the photoes in 355 post.

i've the last bios in asus main site.

then.. legacy is enable.. acpi is enabled.. and the log still write:

-unable to obtain ownership

anitanium · April 9, 2009

disable USB legacy

then your USB will work fine in osx

Hugo_bee · April 9, 2009

wow.. so fast answer.. thanks

i'll try next tuesday.. i'm starting for easter little vacation..

good Easter to you!!

Tharbat · April 9, 2009

Sorry for writing my first pos here... but I've been following all guides and I'm kind of stuck. I managed to install properly 10.5.6, with all the kext pointed by FrodoKenny, and I'm using Chameleon 2.0.

The problem is that I get a timed out waiting for iokit to quiesce and freezes.

I've tried a modded IOATAFamily kext from around the forums, but i get the same result.

Any sugestion?

Thanks!

T.

Hugo_bee · April 9, 2009

sure that you've change ata mode into ahci in the bios proper section?

Tharbat · April 9, 2009

sure that you've change ata mode into ahci in the bios proper section?

I'm positive. I have the same settings in the bios sugested by Ufdah. By the way I have updated my bios to 5.0.4

Hugo_bee · April 9, 2009

me too.we've the same {censored}! no.. ehm.. good thing

but i have some things that are not equal with what are described into that topic.

for example.. i have all native (retail) .. then ioata is not invoked.. except when you use the only one ata connector.. I have an older ATA DVD.. but I havent tested if it is visible or not under osx.

I think IOATA is chained to ATA device.. but is only a idea.

but.. is important if you explain with more words..

what type of partition did you chose.

what kind of setup ypu made (dvd patched and launched manually.. with UOI..setup from scratch..)

ps. have you an osx running in order to make modifies on-the-fly?

you put chameleon 2.. then did you verify if you have proper E/E folder.. with the minimum valid kext? read my last post..

i use LegacyAppleAHCIPort.kext, LegacyIOAHCIBlockStorage.kext, LegacyAppleLPC.kext and

disabler and openhaltrestart and appledecrypter

Tharbat · April 9, 2009

Hey Thanks for answering.

I got pi#@%^ed off so I reformatted the drive and installed everything from scratch, and managed to boot, but following step by step Ufdah's guide (old Chameleon). No NVKush, though...

My Setup.

Bios 5.0.4

4 GB ram Kingston

1 BR-RW Plugged by SATA

1 HD 1Tb (windows) SATA

1 HD 1Tb (Mac) eSata (external) <-- Set as primary Drive in Bios, Booted from it.

Last time I tryed, I booted popperly, but on the next boot I got stuck at the spinning wheel of death.

Now I'm scared to turn it off lol. btw I'm not getting any sound device detected by the OS.

I'll keep updating... thanks though.

T.

EDIT:

I was right. As soon as I rebooted, I got a freeze. I can only boot with -f. I'll try to get a log and post it.

EDIT #2

Here's a log

10/04/09 0:26:46 kernel npvhash=4095 
10/04/09 0:26:45 com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist 
10/04/09 0:26:45 com.apple.launchd[1] (com.apple.blued) Unknown key for boolean: EnableTransactions 
10/04/09 0:26:45 com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight 
10/04/09 0:26:45 com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight 
10/04/09 0:26:46 DirectoryService[11] Launched version 5.6 (v514.24) 
10/04/09 0:26:46 kernel hi mem tramps at 0xffe00000 
10/04/09 0:26:46 kextd[10] 419 cached, 0 uncached personalities to catalog 
10/04/09 0:26:46 kernel PAE enabled 
10/04/09 0:26:54 kernel 64 bit mode enabled 
10/04/09 0:26:54 kernel Darwin Kernel Version 9.6.0: Mon Nov 24 17:37:00 PST 2008; root:xnu-1228.9.59~1/RELEASE_I386 
10/04/09 0:26:55 kernel standard timeslicing quantum is 10000 us 
10/04/09 0:26:55 kernel vm_page_bootstrap: 910048 free pages and 72992 wired pages 
10/04/09 0:26:55 kernel mig_table_max_displ = 79 
10/04/09 0:26:55 kernel Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style. 
10/04/09 0:26:55 kernel AppleACPICPU: ProcessorApicId=1 LocalApicId=0 Enabled 
10/04/09 0:26:55 kernel AppleACPICPU: ProcessorApicId=2 LocalApicId=1 Enabled 
10/04/09 0:26:55 kernel AppleACPICPU: ProcessorApicId=3 LocalApicId=130 Disabled 
10/04/09 0:26:55 kernel AppleACPICPU: ProcessorApicId=4 LocalApicId=131 Disabled 
10/04/09 0:26:55 kernel Loading security extension com.apple.security.TMSafetyNet 
10/04/09 0:26:55 kernel calling mpo_policy_init for TMSafetyNet 
10/04/09 0:26:55 kernel Security policy loaded: Safety net for Time Machine (TMSafetyNet) 
10/04/09 0:26:55 kernel Loading security extension com.apple.nke.applicationfirewall 
10/04/09 0:26:55 kernel Loading security extension com.apple.security.seatbelt 
10/04/09 0:26:55 kernel calling mpo_policy_init for mb 
10/04/09 0:26:55 kernel Seatbelt MACF policy initialized 
10/04/09 0:26:55 mDNSResponder mDNSResponder-176.3 (Sep 30 2008 16:59:38)[22] starting 
10/04/09 0:26:55 kernel Security policy loaded: Seatbelt Policy (mb) 
10/04/09 0:26:55 kernel Copyright (c) 1982, 1986, 1989, 1991, 1993 
10/04/09 0:26:55 configd[14] setting hostname to "system-product-name-de-ignasi-duelo-fandos.local" 
10/04/09 0:26:55 kernel The Regents of the University of California. All rights reserved. 
10/04/09 0:26:55 kernel MAC Framework successfully initialized 
10/04/09 0:26:55 kernel using 16384 buffer headers and 4096 cluster IO buffer headers 
10/04/09 0:26:55 kernel IOAPIC: Version 0x11 Vectors 64:87 
10/04/09 0:26:55 kernel ACPI: System State [S0 S3 S4 S5] (S3) 
10/04/09 0:26:55 kernel Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style. 
10/04/09 0:26:55 kernel Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style. 
10/04/09 0:26:55 kernel mbinit: done 
10/04/09 0:26:55 kernel Security auditing service present 
10/04/09 0:26:55 kernel BSM auditing present 
10/04/09 0:26:55 kernel From path: "uuid",  
10/04/09 0:26:55 kernel Waiting for boot volume with UUID FEFFBEE6-C712-3103-97E8-71BE30EA88E3 
10/04/09 0:26:55 kernel Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict> 
10/04/09 0:26:55 com.apple.SecurityServer[27] Entering service 
10/04/09 0:26:55 kernel Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B/AppleAHCI/PRT2@2/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/ST31000333AS Media/IOGUIDPartitionScheme/Untitled@2 
10/04/09 0:26:55 kernel BSD root: disk1s2, major 14, minor 4 
10/04/09 0:26:55 kernel Jettisoning kernel linker. 
10/04/09 0:26:55 kernel Resetting IOCatalogue. 
10/04/09 0:26:55 kernel IGPU: family specific matching fails 
10/04/09 0:26:55 kernel Matching service count = 1 
10/04/09 0:26:55 kernel Matching service count = 2 
10/04/09 0:26:55 kernel Matching service count = 2 
10/04/09 0:26:55 kernel Matching service count = 2 
10/04/09 0:26:55 kernel Matching service count = 2 
10/04/09 0:26:55 kernel Matching service count = 2 
10/04/09 0:27:00 kernel NVDANV50HAL loaded and registered. 
10/04/09 0:27:00 kernel IGPU: family specific matching fails 
10/04/09 0:27:00 kernel IGPU: family specific matching fails 
10/04/09 0:27:00 kernel [HCIController][configurePM] power parent ready after 1 tries 
10/04/09 0:27:00 kernel IGPU: family specific matching fails 
10/04/09 0:27:00 kernel Matching service count = 0 
10/04/09 0:27:00 kernel NVEthernet: Ethernet address 00:23:54:7c:bc:9d 
10/04/09 0:27:00 bootlog[61] BOOT_TIME: 1239316002 0 
10/04/09 0:27:01 kernel NVEthernet::mediaChanged - Link Down 
10/04/09 0:27:00 rpc.statd[46] statd.notify - no notifications needed 
10/04/09 0:27:01 fseventsd[54] bumping event counter to: 0x3bce (current 0x0) from log file '00000000000003d4' 
10/04/09 0:27:01 org.ntp.ntpd[43] Error : nodename nor servname provided, or not known 
10/04/09 0:27:01 ntpdate[70] can't find host time.euro.apple.com

10/04/09 0:27:01 ntpdate[70] no servers can be used, exiting 
10/04/09 0:27:01 /usr/sbin/ocspd[80] starting 
10/04/09 0:27:01 kernel NVEthernet::mediaChanged - Link Up: Ctrl 1140, Adv 0de1-0200, Lpa 45e1-0000 Autoneg capable 1 
10/04/09 0:27:04 kernel ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out 
10/04/09 0:27:14 kextd[10] writing kernel link data to /var/run/mach.sym

Tharbat · April 10, 2009

I managed to get it working properly, with spdif out, but I had to add the -f kernel flag to the boot to avoid freezing.

I might be off topic, but now I'm trying to get my other hardrive (windows) to work with AHCI, so I can have a dual boot. Did anyone managed to get it working with XP SP3 and this mobo? I tried manual updating the XP drivers (with the AHCI drivers from asus CD) before changing the bios, but I keep getting BSOD.

Thanks folks!

T.

neocui · April 10, 2009

I managed to get it working properly, with spdif out, but I had to add the -f kernel flag to the boot to avoid freezing.

I might be off topic, but now I'm trying to get my other hardrive (windows) to work with AHCI, so I can have a dual boot. Did anyone managed to get it working with XP SP3 and this mobo? I tried manual updating the XP drivers (with the AHCI drivers from asus CD) before changing the bios, but I keep getting BSOD.

Thanks folks!

T.

You have to reinstall windows using the F6 + floppy method. Or...

You don't actually have to put your BIOS in AHCI mode. All that does is changes the PCI ID and type the SATA chip will report to the OS. If you put it into IDE mode, the chip still responds to AHCI commands! (This is how I dual booted XP + Linux back in the very early days) But you need to make sure that the AHCI driver will recognize the chip still. For that you need to edit the Info.plist in AppleAHCIPort. Find the section for MCP79AHCI, change the the PCI ID. For AHCI is 0ab8, for RAID is 0abc, not sure what regular SATA mode is, you can check in windows.

eject · April 10, 2009

hi,

thanks for the new dsdt and the hda kexts from frodo.

i'm using the kexts he supplied in extra and the hda*kexts in s/l/e. no other kexts, no kernel flags needed for booting, all three line outs do work, vanilla kernel atm, bios still 404, i don't see a point in upgrading since everything seems to work fine.

usb is a bit {censored}, i'm using the full speed option since legacy gives me no keyboard in bootloader and full speed sometimes leads to eye tv stating it wold need and usb 2.0. a eboot later it works. also i need to restart eye tv after sleep to detect the device again. doesn't happen on real macs so i think it's somehow usb related.

still a very good hack in ease of setting it up, thank to you folks, diaboliK, signal64, frodo ect

Tharbat · April 11, 2009

You have to reinstall windows using the F6 + floppy method. Or...

You don't actually have to put your BIOS in AHCI mode. All that does is changes the PCI ID and type the SATA chip will report to the OS. If you put it into IDE mode, the chip still responds to AHCI commands! (This is how I dual booted XP + Linux back in the very early days) But you need to make sure that the AHCI driver will recognize the chip still. For that you need to edit the Info.plist in AppleAHCIPort. Find the section for MCP79AHCI, change the the PCI ID. For AHCI is 0ab8, for RAID is 0abc, not sure what regular SATA mode is, you can check in windows.

Hey thanks... I thought I really had to set my BIOS in ahci. I'll try to edit the MCP79 section.

Thanks though!

T.

CamEwardo · April 13, 2009

Does HDMI audio work on this?

After setting it all up i see the main chipsets output options. I selected Digital out but it shows a grayed out volume bar.

I also added all of frodos modded audio kexts and checked permissions.

Do i have to use lineout or SPDIF?

Im trying to get this working for my new comp i have a 47" LG attached to my comp with just the HDMI cable :/

Thks

Asus P5N7A-VM

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites