Jump to content

Kalyway 10.5.2 : install dvd kernel panic

Annoid

By Annoid,
in OSx86 10.5 (Leopard)

 Share
69 posts in this topic

Recommended Posts

Annoid
Annoid
Posted
Posted

Any ideas?

Hardware: Asus Z71V Laptop, Intel 915 chipset, CPU is a Pent. M @ 2Ghz, 2 G system Ram.

This laptop has a very simple BIOS, almost nothing is settable.

Am able to install Kalyway 10.5.1 w/no issues, but cannot upgrade using the combo 10.5.2 updater, rebooting takes 15 min. each time after that, upgrading to netkas 9.2 kernel will not boot.

 

Running the Install DvD for Kalyway 10.5.2 results in the error below.

The install disk will boot fully on other hardware, so it's not a bad d/l or burn.

I've tried every documented boot option I know about, and a few wild guessses, the error is always identical or very nearly so.

 

Thanks in advance for any assistance which someone might be able to provide.

 

Boots apparently ok to this point. Loads drivers for the synaptics touchpad ok, then:

======

panic(cpu 0 caller 0x339C1DE0): AppleSMCPDRC ::start - unrecognized device type\n"@SourceCache/IOPlatfromPluginFamily/IOPlatformPluginFamily-315.0.3/ACPI_SMC_PlatformPlugin/AppleSMCPDRC.cpp

Debugger Called: <panic>

Backtrace, Format - Frame : Return Address (4 potential args on stack)

0x33a2bdb8 : 0x12b0e1 (0x45833c 0x33a2bdec 0x133285 0x0)

0x33a2be08 : 0x339c1de0 (0x339c3460 0x339c3450 0x33a2be48 0x40baah5)

0x33a2be48 : 0x40fd2e (0x3ceb500 0x3c51c00 0x1 0x3ea6c0)

0x33a2bea8 : 0x411bc3 (0x3c51c00 0x3ceb500 0x3c7cdc0 0x0)

0x33a2bf28 : 0x411427 (0x3c51c00 0x3c6a480 0x0 0xffffffff)

0x33a2bf78 : 0x4100a3 (0x3c51c00 0x0 0x33a2bfac 0x1)

0x33a2bfc8 : 0x19f3cc (0x3c4f2a0 0x0 0x1a20b5 0x357c80)

Backtrace terminated-invalid frame pointer 0

Kernel loadable modules in backtrace (with dependancies)

com.apple.driver.ACPI_SMC_PlatformPlugin(3.1.5d3)@0x339ba000->0x339c5fff

dependancy: com.apple.iokit.IOPCIFamily(2.4.1)@0x2e24d000

dependancy: com.apple.iokit.IOACPIFamily(1.2.0)@0x2e263000

dependancy: com.apple.driver.IOPlatformPluginFamily(3.1.5d3)@0x3397a000

dependancy: com.apple.driver.AppleSMC(2.0.1d2)@0x33997000

 

BSD process name corresponding to current thread: kernel_task

 

Mac OS version:

Not yet set

 

Kernel Version:

Darwin Kernel Version 9.2.0: Sun Mar 2 00:11:08 SCT 2008; made by ToH:xnu-1228/BUILD/obj/RELEASE_i386

Link to comment
Share on other sites
neofena
neofena
Posted
Posted

Same here. Any solution?

 

@Annoid can u tell me how exactly did you install 10.5.1 kalyway, because i am with ASUS X51R and i have very simple BIOS too. Can u tell me what did you do step by step to make it work?

 

thanks!

Link to comment
Share on other sites
Annoid
Annoid
Posted
  • Author
Posted

The only issue I have is multibooting w/ XP & Vista, had some issues w/vista, but as far as the OS X install, just put the Kalyway 10.5.1 dvd in, installer booted up just fine.

 

At the customize screen, I selected SSE2 system, Nvidia laptop drivers, Generic sound (Azaliea? or something), no network/wi-fi, and mbr-efi. Let the install go, and it went in no problem. At that point, it starts up, and can select XP or OS X with the darwin bootloader... OS X boots fine, the skge kext gets my LAN up... haven't farted around w/wireless yet.

 

I cannot upgrade to 10.5.2 using the Kalyway combo updater, and any kernel upgrade to 9.2 failed also. I'm starting to think that 10.5.1 is as far as I can go w/that laptop.

Link to comment
Share on other sites
VoeN
VoeN
Posted
Posted

Hi!

 

I have the same problem as you guys, i get a kernal panic everytime i try to install this.

I'm using "Kalyway 10.5.2 DVD Intel Amd", which can be found at the bay.

I tried booting from the CD to start the install, however, i always get into kernal panic.

What i get is: :)

 

Loading Darwin/x86

Loading kernal mach_kernal

Loading HFS+ file: [mach_kernal] from 422d690.

Loading HFS+ file: [mach_kernal] from 422d690.

Loading Drivers: Loading from [/system/Libary/Extensions.mkexet

Loading HFS+ file: [/system/Libary/Extensions.mkexet] from ... (Don't Remember)

Loading HFS+ file: [/system/Libary/Extensions.mkexet] from ... (Don't Remember)

/

 

After this part somthing happens quickly and i get another black screen with smaller white writting; similiar to Annoid's error:

 

panic(cpu 0 caller 0x339C1DE0): AppleSMCPDRC ::start - unrecognized device type\n"@SourceCache/IOPlatfromPluginFamily/IOPlatformPluginFamily-315.0.3/ACPI_SMC_PlatformPlugin/AppleSMCPDRC.cpp

Debugger Called: <panic>

Backtrace, Format - Frame : Return Address (4 potential args on stack)

0x33a2bdb8 : 0x12b0e1 (0x45833c 0x33a2bdec 0x133285 0x0)

0x33a2be08 : 0x339c1de0 (0x339c3460 0x339c3450 0x33a2be48 0x40baah5)

0x33a2be48 : 0x40fd2e (0x3ceb500 0x3c51c00 0x1 0x3ea6c0)

0x33a2bea8 : 0x411bc3 (0x3c51c00 0x3ceb500 0x3c7cdc0 0x0)

0x33a2bf28 : 0x411427 (0x3c51c00 0x3c6a480 0x0 0xffffffff)

0x33a2bf78 : 0x4100a3 (0x3c51c00 0x0 0x33a2bfac 0x1)

0x33a2bfc8 : 0x19f3cc (0x3c4f2a0 0x0 0x1a20b5 0x357c80)

Backtrace terminated-invalid frame pointer 0

Kernel loadable modules in backtrace (with dependancies)

com.apple.driver.ACPI_SMC_PlatformPlugin(3.1.5d3)@0x339ba000->0x339c5fff

dependancy: com.apple.iokit.IOPCIFamily(2.4.1)@0x2e24d000

dependancy: com.apple.iokit.IOACPIFamily(1.2.0)@0x2e263000

dependancy: com.apple.driver.IOPlatformPluginFamily(3.1.5d3)@0x3397a000

dependancy: com.apple.driver.AppleSMC(2.0.1d2)@0x33997000

 

BSD process name corresponding to current thread: kernel_task

 

Mac OS version:

Not yet set

 

Kernel Version:

Darwin Kernel Version 9.2.0: Sun Mar 2 00:11:08 SCT 2008; made by ToH:xnu-1228/BUILD/obj/RELEASE_i386

 

I burned the dvd without any modifications to the .iso.

 

I would apreciate any help/advice/pointers that you can offer me.

Thanks in advnace,

VoeN :D

Link to comment
Share on other sites
NeoG26
NeoG26
Posted
Posted

Hi,

 

I'm having exactly the same problem on my Dell Inspiron 6000 Laptop

Intel Chipset

Pentium M 1.8GHz CPU

ATI Radeon X300 Graphics

 

Any suggestions pleeeeeeease, I am very eager to get this working..

Any help is very much appreciated

 

Thanks

Link to comment
Share on other sites
BooleanAppender
BooleanAppender
Posted
Posted

i'm installing the JaS OsX86 10.5.2 right now on my hp dv1540us

 

it has the following config:

Pentium D 1.86 Ghz

gma 915

AC-97 Audio

1 GB ram

BG2200 (wifi) + Bluetooth.

screen res. 1280 x 768

 

 

all the above hardware work on the JaS 10.4.8 AMD Intel SSE2 SSE3 system

 

will return feedback after it installs successfully.

 

wish me(all of us) luck!!!!

Link to comment
Share on other sites
Racunus
Racunus
Posted
Posted

Hey guys,

 

I have exactly the same problem. My machine:

 

Dell Inspiron 9300

Nvidia GeForce go 6800

Intel Chipset

Pentium 1.83 GHz

 

I downloaded Kalyways 1.5.2 release with no problems and burned on a DVD with 4x speed, not full. -> Kernel panic like you described.

 

Next I went into the Bios and deactivated MiniPCI, Network, WiFi and USB controller.

-> Kernel panic as described.

 

Then I used a blank DVD from a different label, burned it again and tried again -> no change.

 

Then I removed the HD and tried to run it with DVD only -> no difference.

 

Then I used my first DVd and put it in my company's Notebook (I have no system specs, but it's a dual core) -> runs perfectly (sure I couldn't install it, but I came very far)

 

So its seems to depend on something on my single core Dell Notebook - but as I have no options left, I'm hoping someone will come up with a solution. I read in the forums of the Mac-Users with Mac Hardware that they experience the same problems sometimes, so this is a problem with the kernel I guess - but I don't know enough from the Kernel to say for sure.

 

I hope I helped the guys a bit who are trying to find the mistake - would be great to have the ne Kalyway release running on my Dell...

Link to comment
Share on other sites
Racunus
Racunus
Posted
Posted

okay, an update to my tests yesterday. I tried to start the DVD with parameter -v cpus=1 -> again, no success.

 

In another forum someone gave the advise to run the installation in safe mode -x. I tried this, and the process took a little longer, but ended up the same: As my Dell tried to load the 9.2.0 Kernel, I've got the freeze.

 

K, now I'm out of ideas - I hope anyone can give some advice for the problem.

Link to comment
Share on other sites
alvaromf
alvaromf
Posted
Posted
okay, an update to my tests yesterday. I tried to start the DVD with parameter -v cpus=1 -> again, no success.

 

In another forum someone gave the advise to run the installation in safe mode -x. I tried this, and the process took a little longer, but ended up the same: As my Dell tried to load the 9.2.0 Kernel, I've got the freeze.

 

K, now I'm out of ideas - I hope anyone can give some advice for the problem.

 

 

Same Problem with my dell inspiron 9300

and my Dell xps 710

i think is the Dvd

i will download again

Link to comment
Share on other sites
VoeN
VoeN
Posted
Posted

Racunus, I appreciate you informing us about what you did.

As it will save us all some time :P.

 

I don't think theres a solution, i guess we have to wait and see.

 

Best Regards,

Voen

Link to comment
Share on other sites
Guest
Guest
Posted
Posted

Ahhh!!!! i get this bloody problem as well... spend ages download Kalyway 10.5.2 and then i get this bloody problem.

My specs are posted on my signature.

 

I really want a fix for this since its being a flipping pain.

 

Another thing i have tried -v -x -s cpus=1 all at once and it doesn't work.

Leo4Allv2 atleast starts to install on my comp (can't select drive)

JaS 10.4.8 completely installs

 

So it seems to be a kernel problem or compatability. Sigh

Link to comment
Share on other sites
Dense
Dense
Posted
Posted

The problem is caused in the following file:

 

/System/Library/Extensions/IOPlatformPluginFamily.kext/Contents/PlugIns/ACPI_SMC_PlatformPlugin.kext/Contents/Info.plist

 

In that directory you'll also notice an Info.plist.orig

 

This was something I was experimenting with based on some information provided by Slice. In theory it should have been a good change but in practise it did nothing but cause crashes. I disabled it in my build process but for some reason Kalyway decided to add it and it was missed in his own testing.

 

The solution is difficult because you need to overwrite the Info.plist with the Info.plist.orig to restore it to working values. Obviously on a read only media this is going to be a problem. I'm hoping Kalyway provides a PPF to fix this.

Link to comment
Share on other sites
VoeN
VoeN
Posted
Posted

Hey Guys!

I'm downloading Leo4allv3 and i will tell you what happens, as its an alrenative which is just as good...

I talk to you guys soon,

VoeN

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...