Intel Wireless 2100, 2200bg, 2915bg, 3945abg, 4965agn

[Miguel Madrid]

Logs from 792

 

No KP....

systemlog.txt

[mlazy]

792 kext:iwi3945r792.kext.zip

 

you fixed the KP:

 

792syslog.txt

 

Looks like it sees my channel 1 base station: (LukeGX), then keps scanning for others?

 

 

Apr 22 14:14:52 Sony kernel[0]: c 75 6b 65 47 58 01 08 82 84 d.1...LukeGX....Apr 22 14:14:52 Sony kernel[0]: IOPCCard debug: iwl data: 30: 8b 96 24 b0 48 6c 03 01 01 05 04 00 01 01 00 2a ..$.Hl.........*Apr 22 14:14:52 Sony kernel[0]: IOPCCard debug: iwl data: 40: 01 00 2f 01 00 32 04 8c 12 98 60 dd 09 00 10 18 ../..2....`.....Apr 22 14:14:52 Sony kernel[0]: IOPCCard debug: iwl data: 50: 02 02 f0 00 00 00 dd 18 00 50 f2 01 01 00 00 50 .........P.....PApr 22 14:14:52 Sony kernel[0]: IOPCCard debug: iwl data: 60: f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 0c 00 .....P.....P....Apr 22 14:14:52 Sony kernel[0]: IOPCCard debug: iwl data: 70: dd 18 00 50 f2 02 01 01 80 00 03 a4 00 00 27 a4 ...P..........'.Apr 22 14:14:52 Sony kernel[0]: IOPCCard debug: iwl data: 80: 00 00 42 43 5e 00 62 32 2f 00 ..BC^.b2/.Apr 22 14:14:52 Sony kernel[0]: ieee80211_rx_irqsafe @ /Users/super/Desktop/iwi3945/792/compatibility.cpp:1841

[Miguel Madrid]

Not sure if my last log was really from 792...

 

These both are for sure..

 

the second one is with the HW switch move to off..

systemlog792.txt

systemlog792_switchoff.txt

[rubinho93]

Here are my logs for rev 792

I can't find any errors on driver start. No kp on load or freeze

systemlogrev792.txt

[mlazy]

Here's a killswitch attempt from 792:

 

792killswitch.txt

 

this stuff is all new, is it trying to regulate the power on my card to help temperature?

 

Apr 22 14:22:18 Sony kernel[0]: iwl3945: U iwl3945_send_cmd_sync Wait POWER_TABLE_CMD Condition: 49ms left

Apr 22 14:22:18 Sony kernel[0]: iwl3945: U iwl3945_send_cmd_sync Command POWER_TABLE_CMD failed: FW Error

Apr 22 14:22:18 Sony kernel[0]: iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_BT_CONFIG (#9b), seq: 0x0401, 16 bytes at 1[1]:4

Apr 22 14:22:18 Sony kernel[0]: iwl3945: U iwl3945_send_cmd_sync Wait REPLY_BT_CONFIG Condition: 0ms left

Apr 22 14:22:18 Sony kernel[0]: error iwl3945: Error sending REPLY_BT_CONFIG: time out after 500ms.

Apr 22 14:22:18 Sony kernel[0]: iwl3945: U iwl3945_hw_reg_txpower_get_temperature Temperature: 78

Apr 22 14:22:18 Sony kernel[0]: iwl3945: U is_temp_calib_needed Getting cooler, delta -49,

Apr 22 14:22:18 Sony kernel[0]: iwl3945: U is_temp_calib_needed Timed thermal calib needed

Apr 22 14:22:18 Sony kernel[0]: iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x0d

Apr 22 14:22:18 Sony kernel[0]: iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x0f

Apr 22 14:22:18 Sony kernel[0]: iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x05

Apr 22 14:22:18 Sony kernel[0]: iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x07

Apr 22 14:22:18 Sony kernel[0]: iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x09

Apr 22 14:22:18 Sony kernel[0]: iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x0b

Apr 22 14:22:18 Sony kernel[0]: iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x01

Apr 22 14:22:18 Sony kernel[0]: iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 235 dsp 121 rate code 0x03

Apr 22 14:22:18 Sony kernel[0]: iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 171 dsp 110 rate code 0x0a

Apr 22 14:22:18 Sony kernel[0]: iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 171 dsp 110 rate code 0x14

Apr 22 14:22:18 Sony kernel[0]: iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 171 dsp 110 rate code 0x37

Apr 22 14:22:18 Sony kernel[0]: iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 171 dsp 110 rate code 0x6e

 

 

AND, 1 more Question: based onthe log below, it sees my channel 1 base station, outlines some specs on it, then kind of panics while trying to associate?

 

Apr 22 14:29:30 Sony kernel[0]: iwl3945: U iwl3945_rx_handle r = 79, i = 78, REPLY_3945_RX, 0x1b

Apr 22 14:29:30 Sony kernel[0]: iwl3945: U iwl3945_rx_reply_rx Rssi -75 noise -127 qual 55 sig_avg 0 noise_diff 0

Apr 22 14:29:30 Sony kernel[0]: iwl3945: U iwl3945_report_frame Beacon: 0x0080, dst=0xff, src=0x1b, rssi=20, tim=428162242 usec, phy=0x23, chnl=1

Apr 22 14:29:30 Sony kernel[0]: IOPCCard debug: iwl data: 0: 80 00 00 00 ff ff ff ff ff ff 00 12 17 6d 8a 1b .............m..

Apr 22 14:29:30 Sony kernel[0]: IOPCCard debug: iwl data: 10: 00 12 17 6d 8a 1b 90 f8 8c 91 6c 89 56 00 00 00 ...m......l.V...

Apr 22 14:29:30 Sony kernel[0]: IOPCCard debug: iwl data: 20: 64 00 31 04 00 06 4c 75 6b 65 47 58 01 08 82 84 d.1...LukeGX....

Apr 22 14:29:30 Sony kernel[0]: IOPCCard debug: iwl data: 30: 8b 96 24 b0 48 6c 03 01 01 05 04 00 01 01 00 2a ..$.Hl.........*

Apr 22 14:29:30 Sony kernel[0]: IOPCCard debug: iwl data: 40: 01 00 2f 01 00 32 04 8c 12 98 60 dd 09 00 10 18 ../..2....`.....

Apr 22 14:29:30 Sony kernel[0]: IOPCCard debug: iwl data: 50: 02 02 f0 00 00 00 dd 18 00 50 f2 01 01 00 00 50 .........P.....P

Apr 22 14:29:30 Sony kernel[0]: IOPCCard debug: iwl data: 60: f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 0c 00 .....P.....P....

Apr 22 14:29:30 Sony kernel[0]: IOPCCard debug: iwl data: 70: dd 18 00 50 f2 02 01 01 80 00 03 a4 00 00 27 a4 ...P..........'.

Apr 22 14:29:30 Sony kernel[0]: IOPCCard debug: iwl data: 80: 00 00 42 43 5e 00 62 32 2f 00 ..BC^.b2/.

[jalavoui]

iwi3945 rel 793

fix for: "APs don't scan"

all previous logs shows that the driver isn't scanning

all logs show errors on starttup

the bug is in driver first load

try kextload to get initial log lines

need to fix this first for the scan to work

[pa28cr]

Here is my 1st 792 log

It also sees my AP

 

Apr 22 12:38:08 pabmacpro kernel[0]: iwl3945: U iwl3945_report_frame Beacon: 0x0080, dst=0xff, src=0x6e, rssi=39, tim=200615601 usec, phy=0x23, chnl=1
Apr 22 12:38:08 pabmacpro kernel[0]: IOPCCard debug: iwl data: 0: 80 00 00 00 ff ff ff ff ff ff 00 13 46 a0 06 6e ............F..n
Apr 22 12:38:08 pabmacpro kernel[0]: IOPCCard debug: iwl data: 10: 00 13 46 a0 06 6e e0 dd 22 21 fc 32 10 00 00 00 ..F..n.."!.2....
Apr 22 12:38:08 pabmacpro kernel[0]: IOPCCard debug: iwl data: 20: 64 00 61 04 00 09 43 41 53 41 5f 57 49 46 49 01 d.a...CASA_WIFI.
Apr 22 12:38:08 pabmacpro kernel[0]: IOPCCard debug: iwl data: 30: 05 82 84 8b 96 2c 03 01 06 05 04 01 03 00 00 07 .....,..........
Apr 22 12:38:08 pabmacpro kernel[0]: IOPCCard debug: iwl data: 40: 06 55 53 20 01 0b 1e 2a 01 00 32 08 0c 12 18 24 .US ...*..2....$
Apr 22 12:38:08 pabmacpro kernel[0]: IOPCCard debug: iwl data: 50: 30 48 60 6c dd 06 00 03 2f 01 00 01 0H`l..../...

 

P.S. I dont know why my log file is so big, and it froze while unloading, will keep testing.

792log.txt

[mlazy]

793 for testing:

 

iwi3945r793.kext.zip

[rubinho93]

my logs for rev 793

systemlogrev793.txt

[mlazy]

793 logs:

 

getting no more "error:" calls, but still seeing scan issues of course.

 

793syslogs.txt

[jalavoui]

iwi3945 driver status

while you keep getting errors on driver first load it will never work

help by looking at the code and try to fix

rel 793 is the latest source code

i'll wait for someone to fix the code

good luck

[Miguel Madrid]

Here is log from 793...

 

Jalavoui, could you please give us more information about the init errors you talk about ??? May we help ????

 

The card seems to get data and the application read the data.... so it's working...

 

we are going step by step.... but we have done a long way...

 

Let's move on......

systemlog_793.txt

[leftlane7]

Is it just me, or is the link to the revisions only showing r748?

[tiennemannes]

Attached logs for revision 792 & 793 (with and w/o turn off button).

 

Keep up the good work, we're almost there!!!

 

Cheers, Tyn

Archive.zip

[pere]

First of all a big HURRA! to Javalui, he is coding a card he doesnt own and recoding with our horrible logs :censored2: you are the hero of most of us!.

 

This last version has no errors on manual load and just load fine on reboot till it finds a Ucode error, then the card goes crazy and byebye code...

 

Im very impressed cause now i dont find ANY error on manual load, just the danm Ucode error on boot.

I have taken a log from boot without the RF turn on, i used the kill switch and i found that if the card is not receiving any network packet, gives different info and no errors, after boot into system tried to tun on by hardware and didnt awake, but at least i have seen different code on boot and no errors ( I think ).

Javalui, can you take a little look to this log and tell us where to look for the error?, I mean, i witch file from the building folder and where to get info about the hardware coding of the intel 3945, i know we are not coders, but maybe we can find someone to help you....

Booting_HW_switch_off.txt

[mlazy]

Jalavoui,

 

Can you repost that link to the linux log please? too many pages to crawl in this thread. Thanks.

[jalavoui]

maybe we can find someone to help you....

 

your logs is the only one that looks right

the driver starts right and tries to load ucode

you have:

22/04/08 21:53:36 kernel warning iwl3945: Radio disabled by HW RF Kill switch \

this means you start testing the driver with the card off

goto windows and turn the card on by pressing the switch

reboot to mac os

 

i wonder why you're the only one with the right logs

[pere]

your logs is the only one that looks right

the driver starts right and tries to load ucode

you have:

22/04/08 21:53:36 kernel warning iwl3945: Radio disabled by HW RF Kill switch \

this means you start testing the driver with the card off

goto windows and turn the card on by pressing the switch

reboot to mac os

 

i wonder why you're the only one with the right logs

 

Sorry Javalui, i enjoyed so much my hackintosh install and erased windows... i just have windows on parallels and it cant see the card...

 

Every time i build the kext, i erase the whole downloaded project folder and download it again then i use iwi3945.xcodeproj to build the kext, so it points to my build folder... this can make a difference with others? or is just there are several versions of the card?.

[Megnus]

Can't you turn the card on or off in the bios with same effect?

[jalavoui]

iwi3945 rel 802

@#! another way to start the card

 

wait...

the svn tree is corrupted

 

Cxddev,

 

you need to use anoter folder for iwi4965

if you need help i fix the iwi4965 folder after you upload it

i'll fix the iwi3945 tree

 

iwi3945 rel 803

ready to go

just check if it starts ok and post system.log

if you know how to help writting code just do it - don't ask me to teach you cause i don't know what i'm doing

 

mlazy,

if you search in this topic for "linux" i think you can get the link to the linux log

[pere]

Got a big and nice Pernel Kanic...I have no cam,sorry.

 

No way to start the kext...

[agzela]

Sorry Javalui, i enjoyed so much my hackintosh install and erased windows... i just have windows on parallels and it cant see the card...

 

Every time i build the kext, i erase the whole downloaded project folder and download it again then i use iwi3945.xcodeproj to build the kext, so it points to my build folder... this can make a difference with others? or is just there are several versions of the card?.

 

Use a Linux live CD http://www.knoppix.org/ to turn on card the OS runs from CD!! Great for testing... Or better yet www.ubuntu.com

[mlazy]

803 for others to test:

 

iwi3945r803.kext.zip

[Doctadre]

three times now, upon trying to load 803kext i get an immediate kp gonna take a look at the code as well brb

[righteye]

803 for others to test:

 

iwi3945r803.kext.zip

Got KP with your kext and same with the one i compiled

Have a look on this: