Jump to content

mlazy

Members
  • Content count

    148
  • Joined

  • Last visited

  1. Broadcom BCM440X for snow

    One more update: Launching Firefox or safari kills the network again, but chrome is fine. I'm stumped.
  2. Broadcom BCM440X for snow

    FIXED: I restored the original IONetworking.kext from 10.6 in my 10.6.2 install, and everything works normally again!
  3. Broadcom BCM440X for snow

    I tried both: cpus=1 has no effect on the issue maxmem=1024 limits my system to 1 Gig of RAM and fixes the problem, but it's not a solution. I want to use all of my installed RAM.
  4. Broadcom BCM440X for snow

    Here's another interesting note. I've got a Dell Optiplex 320, and this issue started happening when I upgraded from 1 to 2 gigs of RAM. The DIMMS are identical, and the right speed for the machine. If I pull one of them out, the network is fine. As soon as I put the second one in, the same issue with the network dying within a minute of boot time occurs. Stranger still, I borrowed a 2 gig DIMM from another box, and the same issue happens. Looks like I'm stuck at 1G of RAM for now...
  5. 900 log. Regular boot, manual kexload. Correct me if I'mwrong, but it looks like it loads well, gets a Microcode HW error, reboots, gets a UCode error, then loops? Going to go test a few more times... 900.txt Update: -x boot gives me immediate kp on kextload.
  6. Hey all, 899 xboot, manual load. Loads for about 15 seconds, then hard freeze. 899xboot.txt
  7. Post your kext too please. I'd love to test it as well. Do you have all of Jalavoui's hacks enabled at thtis point?
  8. 881 logs: 1. Clean build no hacks: 881_clean.txt 2. Atomic hack=immediate freeze after kextload 3. return_rc hack: 881return_rc.txt 4. Send power mode hack=immediate freeze: I'm gonna play with the atomic hack now.. BTW, I get BT erors sometimes, but don't have bluetooth at all.....is it something else?
  9. Buld 878: I'll post logs in a few mins. stuck in a loop: Apr 28 17:24:22 Sony kernel[0]: error iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: iwl3945_enqueue_hcmd failed: -28 Apr 28 17:24:22 Sony kernel[0]: test_function @ /Users/super/Desktop/iwi3945/878/compatibility.cpp:6524 Apr 28 17:24:22 Sony kernel[0]: ieee80211_sta_scan_work @ /Users/super/Desktop/iwi3945/878/compatibility.cpp:5266 Apr 28 17:24:25 Sony kernel[0]: rf 203 dsp 127 rate code 0x0f Apr 28 17:24:25 Sony kernel[0]: iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 203 dsp 127 rate code 0x05 Apr 28 17:24:25 Sony kernel[0]: iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 203 dsp 127 rate code 0x07 Apr 28 17:24:25 Sony kernel[0]: iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 203 dsp 127 rate code 0x09 Apr 28 17:24:25 Sony kernel[0]: iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 203 dsp 127 rate code 0x0b Apr 28 17:24:25 Sony kernel[0]: iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 203 dsp 127 rate code 0x01 Apr 28 17:24:25 Sony kernel[0]: iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 203 dsp 127 rate code 0x03 Apr 28 17:24:25 Sony kernel[0]: iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 139 dsp 116 rate code 0x0a Apr 28 17:24:25 Sony kernel[0]: iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 139 dsp 116 rate code 0x14 Apr 28 17:24:25 Sony kernel[0]: iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 139 dsp 116 rate code 0x37 Apr 28 17:24:25 Sony kernel[0]: iwl3945: U iwl3945_hw_reg_send_txpower ch 1:1 rf 139 dsp 116 rate code 0x6e Apr 28 17:24:25 Sony kernel[0]: error iwl3945: No space for Tx Much quiter logs than normal, is this a good thing? 878 full logs: 878.txt
  10. Hey, In netwprk prefs, click on the new enet, then click advanced. Cancel the advanced window, and apply is now available. It will fix this error.
  11. 873 log. Lots of scanning, even on my card version Jalavoui! Still missing some init lines, but no load errors afik. The log runs through a few scans. 873syslog.txt
  12. Hey all, 861 logs attached. init lines missign again. manual kextload. Looks like you all did a lot of work yesterday. it looks like its scanning a little bit. oh and this is new: Apr 27 09:21:42 Sony kernel[0]: iwl3945: U iwl3945_rx_handle r = 30, i = 29, REPLY_3945_RX, 0x1b Apr 27 09:21:42 Sony kernel[0]: iwl3945: U iwl3945_rx_reply_rx Bad CRC or FIFO: 0x00000702. Hope this log helps some. But, as you know, my card seems different than most. 861.txt
  13. Jalavoui, still having ucode issues, but the logs show some new scan routines. My logs are probably no good to you, but worth a shot to review. I'll kep playing around with the hacks anyway. Btw; is this the error thrown because the ucode load fails? (just want to know what I'm looking at) Apr 26 08:54:50 Sony kernel[0]: error iwl3945: Microcode SW error detected. Restarting 0x82000008. Apr 26 08:54:50 Sony kernel[0]: error iwl3945: Start IWL Error Log Dump: Apr 26 08:54:50 Sony kernel[0]: error iwl3945: Status: 0x00010132, Config: 00000000 count: 1 Apr 26 08:54:50 Sony kernel[0]: error iwl3945: Desc Time asrtPC blink2 ilink1 nmiPC Line Apr 26 08:54:50 Sony kernel[0]: error iwl3945: SYSASSERT (#5) 0000019322 0x0089A 0x00FE0 0x00300 0x00000 57 Apr 26 08:54:50 Sony kernel[0]: error iwl3945: Start IWL Event Log Dump: display count 8, wraps 0 Apr 26 08:54:50 Sony kernel[0]: error iwl3945: 0000000000 0x000000d5 0117 Apr 26 08:54:50 Sony kernel[0]: error iwl3945: 0000000000 0x000000be 0118 Apr 26 08:54:50 Sony kernel[0]: error iwl3945: 0000002107 0x00000000 0651 Apr 26 08:54:50 Sony kernel[0]: error iwl3945: 0000002128 0xffffff22 0454 Apr 26 08:54:50 Sony kernel[0]: error iwl3945: 0000002129 0x00000000 0472 Apr 26 08:54:50 Sony kernel[0]: error iwl3945: 0000002150 0x000000c5 0104 Apr 26 08:54:50 Sony kernel[0]: error iwl3945: 0000019321 0x00000000 0401 Apr 26 08:54:50 Sony kernel[0]: error iwl3945: 0000019323 0x00000100 0125 846.txt
  14. Thanks for the alternate ucode files. v4 and the original in the project both seem to work best for me. I'll keep testing. I know my card is a pain in the @SS.
  15. Hey all, 841 test logs. Things are looking amazing again. For 3945, scan is running on kextload, is that right again? keep getting: Apr 25 16:27:07 Sony kernel[0]: iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0402, 48 bytes at 2[2]:4 Apr 25 16:27:07 Sony kernel[0]: iwl3945: U iwl3945_send_cmd_sync Wait REPLY_RXON Condition: 0ms left Apr 25 16:27:07 Sony kernel[0]: error iwl3945: Error sending REPLY_RXON: time out after 500ms. Apr 25 16:27:07 Sony kernel[0]: error iwl3945: Error setting new configuration (-60). Similar to logs from this morning. BUT, all my init lines are back! 841.txt
×