Intel Wireless 2100, 2200bg, 2915bg, 3945abg, 4965agn

[Toxics]

iwi 2200, nsGui not working its says "" You Can not Open Application NsGui, it may be damaged or not complete""

please help, and also guide me how to use network selector for home network with password on key index 1,cuse its automatically connects to the available free network that i can not get access to because of it has ip block

[rabidpenguin]

iwi3845 rel 1010

 

Can anyone point me in the right direction on this compile issue? define.h is failing trying to run a script, and therefore, the kext is not compiling.

 

I've attached the define.h debug log and the script.

define.h_build_errors.txt

[jalavoui]

scan_dev scan

 

iwi3945 rel 1011

iwi4965 rel 1012

 

nop this is wrong

i'll fix and upload a new release

 

done

 

iwi3945 rel 1013

iwi4965 rel 1014

[Sophitia]

4965 rev 1014

log 1 before i launched networkSelector

log 2 after i launched networkSelector, tried to turn the card on/off and initiate scans

I will try rebooting now if there's any problem I will post.

system.log1.txt

system.log2.txt

[Doctadre]

Here is my log, I'll be back in a few hours

systemlog1013.txt

[jalavoui]

scan part2

might get a kp

 

iwi3945 rel 1015

iwi4965 rel 1016

 

Doctadre,

what's wrong with your card?

you always get timeouts errors - the driver don't work with this

[Doctadre]

Im telling you, not too sure whats wrong. There are some random builds where everything works, and I get lots of activity, and then after that, its time out after timeout. I may do a reinstall to see if that helps. Im sure the chun nan kexts arent loading properly. I'll try out this build and then its on to reinstall.

 

post edit: {censored} have to redownload xcode.

[nordix]

iwi3945 rel 1013 -> 4 reboots, at last one I made 2 scans with networkselector

system.txt.zip

[Sophitia]

r1016 4965

1st log right after install kext

2nd after trying to initiate a scan in networkSelector and turning the card on/off

No KP yet. I will reboot and see what's happening. If there's any KP i will post.

Hope this helps

system.log1.txt

system.log2.txt

[jalavoui]

fixed tx packet code

 

iwi3945 rel 1017

iwi4965 rel 1018

 

the logs for 4965 are interesting

[nordix]

iwi3945 rel 1015

 

reboot 3-4 times, scan with netsel at 1st reboot (immediately after kext install). Then I scan at last reboot several times - scan behavior seems strange and unstable

 

 

rel 1017

 

scan without reboots - 1st scan with uCode errors

system.txt.zip

system2.txt.zip

[Sophitia]

r1018 4965

Strangely enough this time the system did not recognise the kext immediately after install. I had to do a kextload -t to let the log going.

1. right after doing the kext load

2. after trying to initiate a scan

will reboot and see if anything's happening.

P.S. After rebooting the log seems to stop rolling. I will try to post more logs here.

P.S.2. Log 3 has the messages that kept repeating after I rebooted (the last few lines).

The networkSelector scan does not seem to make the log respond

I guess if i do another kext load it will start rolling again.

system.log1.txt

system.log2.txt

system.log3.txt

[jalavoui]

May 8 16:02:46 Forsaken kernel[0]: IOPCCard debug: en1: Discarded packet with nonexistent originating device

 

the driver don't tx packets

trying to fix...

this is not easy - kp expected

 

iwi3945 rel 1019

iwi4965 rel 1020

[nordix]

this is from 1017, 2 reboots, 2 scans at the 2nd reboot

system.txt.zip

[Sophitia]

This time the log starts rolling as soon as i installed the kext again

2 logs as usual.

I'mma restart now.

r1020 btw 4965

system.log1.txt

system.log2.txt

[nordix]

3945 rel 1019 -> single KP was before reboot after kext installation (on kextunload?), then - no KP's. Get timeouts, only 4th reboot was norm. And still have error "Discarded packet with nonexistent originating device" when scanning with netscan

system.txt.zip

[jalavoui]

same tx bug in logs...

let's try this

 

iwi3945 rel 1021

iwi4965 rel 1022

[Sophitia]

r1022 4965

immediate KP upon install

Reboot still KP.

What log should I post to u?

Unfortunately I don't have a good enough camera to produce a readable image of the screen when i do a -v mode >.<

[nordix]

3945 rel 1021 -> KP's on kext installation and on each reboot

 

BTW! Today and tomorrow we celebrate Victory Day, so let me congratulate you with this great holiday!

system.txt.zip

[jalavoui]

working on tx code...

please post kp so i can try to fix

 

iwi3945 rel 1023

iwi4965 rel 1024

[Sophitia]

R1024 4965

Cannot find a good enough camera >.< KP again. The best I could get is my iPhone and it's all blurry. Sorry I will have to hand it over to someone else.

[nordix]

iwi3945 rel 1023 -> only freezes (blue screen), can't get shots of KP

 

Sophitia - iPhone's camera is good enough, look at my shots

system.txt

[Gabik123]

lol nordix, nice pics

 

how do you test using network selector?

[jalavoui]

code for dev_queue_xmit()

post the kp picture

you can help by trying to find out where the kp occurs

 

iwi3945 rel 1025

iwi4965 rel 1026

[Sophitia]

Here's my attempt. They are all the same screen (When it stopped rolling).

Must be because my laptop's screen is only 11" >.<

Hopefully it will give you a clue.

P.S. Actually they are readable. Here's rel 1024 btw i will do rel 1026 now.