righteye Posted May 4, 2010 Author Share Posted May 4, 2010 My os is:10.6.3 Retail with chameleon 2 rc3 as boot manager. hardware: acer travelmate 5720g These are my kexts for ati radeon x2500 (x1700) dual monitor is workink laptop is at 1200x800 external monitor is at 1680x1050 there is 2 little problems, 1rst: i dont know how to boot without external monitor?! 2nd: there is a line about 1px line, that goes from the bottom all the way to up, on the esternal monitor, how can i disable that? it is like a SCAN LINE.... (how to install win7 next to my osx 10.6.3 to get dual boot? ) You have the same EDID for the external and internal displays inside Natit ... but is not ok ... better delete the DFP1 string .... also for this video card everybody has to boot with the external display plugged in at boot time in order to work Dual Display Must be sure that the LVDS EDID is for and from internal display ... I'll do an EvoEnabler injector for you right now and upload it in a few minutes ... to give it a try Here is the injector to testdorkakutya_71DE_x2500_EVOenabler.kext.zip inside there are 2 info.plist to check out, one has an EDID from a Samsung TV, is just for test, to remove it delete or edit the DFP1 string. Hope it works fine for you now. Cheers Link to comment Share on other sites More sharing options...
dorkakutya Posted May 4, 2010 Share Posted May 4, 2010 You have the same EDID for the external and internal displays inside Natit ... but is not ok ... better delete the DFP1 string .... also for this video card everybody has to boot with the external display plugged in at boot time in order to work I'll do an EvoEnabler injector for you right now and upload it in a few minutes ... to give it a try i have no windows anymore, how can i get my edids under osx? ive just deleted that string you recomended, now that scan line goes from up to the bottom, and slower than it was going from the bottom to the top. strange. Link to comment Share on other sites More sharing options...
righteye Posted May 4, 2010 Author Share Posted May 4, 2010 i have no windows anymore, how can i get my edids under osx? ive just deleted that string you recomended, now that scan line goes from up to the bottom, and slower than it was going from the bottom to the top. strange. there is no way to get a proper EDID from osx but normally there is no need for the external display ... try to test the new injector posted above and do a repair permissions The internal display works as it is suppose to or there are some glitches ? Link to comment Share on other sites More sharing options...
dorkakutya Posted May 4, 2010 Share Posted May 4, 2010 there is no way to get a proper EDID from osx but normally there is no need for the external display ... try to test the new injector posted above and do a repair permissions The internal display works as it is suppose to or there are some glitches ? the internal works perfektly thanks for the kext, but dont know what to do with it, should i remove the NatitX1700.kext from SLE before i install this one with kexthelper? or what? Link to comment Share on other sites More sharing options...
righteye Posted May 4, 2010 Author Share Posted May 4, 2010 the internal works perfektlythanks for the kext, but dont know what to do with it, should i remove the atinjekkext from SLE before i install this one with kexthelper? or what? Soooo There is a Atiinject and a Natitx1700 together in your system ? The EVOenabler you can put it in /Extra/Extensions folder and yes ... only one injector must be installed in order to get proper results. Link to comment Share on other sites More sharing options...
dorkakutya Posted May 4, 2010 Share Posted May 4, 2010 SooooThere is a Atiinject and a Natitx1700 together in your system ? The EVOenabler you can put it in /Extra/Extensions folder and yes ... only one injector must be installed in order to get proper results. wow, now it seems to be working perfectly but closer look, i can see the scan line from bottom to top very very fast. is that normal? (with info2.plist -» info.plist) the info.plist cause this funny stuff (uploaded pic) with the attached prefpanel i got this edids: iv got these two edids from this switchresx4.zip INTERNAL: < 00FFFFFF FFFFFF00 320C00D8 00000000 00100103 80211578 0AB34099 59538D27 25505400 00000101 01010101 01010101 01010101 0101BC1B 00A05020 17303020 36004BCF 10000019 00000000 00000000 00000000 00000000 00000000 00FE004C 47506869 6C697073 4C43440A 000000FE 004C5031 35345758 342D544C 43320048 > EXTERNAL: < 00FFFFFF FFFFFF00 1E6DB856 473E0100 22120103 6A2F1E78 EADC55A3 59489E24 115054A7 6B80950F 95008180 8140714F 01010101 01017C2E 90A0601A 1E403020 3600DA28 1100001A 21399030 621A2740 68B03600 DA281100 001C0000 00FD0038 4B1E530F 000A2020 20202020 000000FC 00573232 33340A20 20202020 202000A6 > Link to comment Share on other sites More sharing options...
righteye Posted May 4, 2010 Author Share Posted May 4, 2010 wow, now it seems to be working perfectly but closer look, i can see the scan line from bottom to top very very fast.is that normal? (with info2.plist -» info.plist) the info.plist cause this funny stuff (uploaded pic) with the attached prefpanel i got this edids: iv got these two edids from this switchresx4.zip INTERNAL: < 00FFFFFF FFFFFF00 320C00D8 00000000 00100103 80211578 0AB34099 59538D27 25505400 00000101 01010101 01010101 01010101 0101BC1B 00A05020 17303020 36004BCF 10000019 00000000 00000000 00000000 00000000 00000000 00FE004C 47506869 6C697073 4C43440A 000000FE 004C5031 35345758 342D544C 43320048 > EXTERNAL: < 00FFFFFF FFFFFF00 1E6DB856 473E0100 22120103 6A2F1E78 EADC55A3 59489E24 115054A7 6B80950F 95008180 8140714F 01010101 01017C2E 90A0601A 1E403020 3600DA28 1100001A 21399030 621A2740 68B03600 DA281100 001C0000 00FD0038 4B1E530F 000A2020 20202020 000000FC 00573232 33340A20 20202020 202000A6 > the switchresx4 is geting the info from mac side ... so is exactly what is injected, so if is a wrong injection might not be a good way to get that info. That did not happen on windows, the line there ? Also it is a VGA connection or DVI ? In about this mac at the graphics section ... the external display is the model you have or is just another "display" Link to comment Share on other sites More sharing options...
dorkakutya Posted May 4, 2010 Share Posted May 4, 2010 the switchresx4 is geting the info from mac side ... so is exactly what is injected, so if is a wrong injection might not be a good way to get that info. That did not happen on windows, the line there ? Also it is a VGA connection or DVI ? In about this mac at the graphics section ... the external display is the model you have or is just another "display" in win (xp vista win7 everything is just fine) exernal is: LG Flatron W2234S VGA (not dvi, but my card has also dvi connection, i did never use that) mac recognizes external as W2234 in win (xp vista win7 everything is just fine) exernal is: LG Flatron W2234S VGA (not dvi, but my card has also dvi connection, i did never use that) mac recognizes external as W2234 after a restart strangely the scan line goes from the top to the bottom again and this time it is slow. also for this video card everybody has to boot with the external display plugged in at boot time in order to work [/color] what if im on a train, on a trip, and i have no external monitor with me? Link to comment Share on other sites More sharing options...
mairhons Posted May 5, 2010 Share Posted May 5, 2010 Hello, i hava a Acer Travelmate 5720g with a Mobility x2500 =x1700. Can anybody tell my the Kexts which work for my card? Thank you. Link to comment Share on other sites More sharing options...
dorkakutya Posted May 5, 2010 Share Posted May 5, 2010 Hello, i hava a Acer Travelmate 5720g with a Mobility x2500 =x1700. Can anybody tell my the Kexts which work for my card? Thank you. i have the same and got my vidcard workin. see the 3 files above! install them with kexthelper , and try... here http://www.insanelymac.com/forum/index.php...d=1461955 and you can try this one http://www.insanelymac.com/forum/index.php...p=1452238 instead of my NatitX1700 Did you got your mic working? (how?) Link to comment Share on other sites More sharing options...
mairhons Posted May 5, 2010 Share Posted May 5, 2010 i have the same and got my vidcard workin. see the 3 files above!install them with kexthelper , and try... here http://www.insanelymac.com/forum/index.php...d=1461955 and you can try this one http://www.insanelymac.com/forum/index.php...p=1452238 instead of my NatitX1700 Did you got your mic working? (how?) I have not installed Mac OS yet, but I will do that tomorrow. After that i will watch for the mic and tell you. Does your internal monitor work 1280x800 with QE/CI? Any problems with the graphic? (PS: i need only internal monitor) Link to comment Share on other sites More sharing options...
dorkakutya Posted May 5, 2010 Share Posted May 5, 2010 I have not installed Mac OS yet, but I will do that tomorrow. After that i will watch for the mic and tell you. Does your internal monitor work 1280x800 with QE/CI? Any problems with the graphic? (PS: i need only internal monitor) yes it does, right now im without external monitor, im using my kext ( ATINDRV.kext.zip ATIRadeonX1000.kext.zip ) from here: http://www.insanelymac.com/forum/index.php...p=1452238 and that one righteye gave me: dorkakutya_71DE_x2500_EVOenabler.kext.zip http://www.insanelymac.com/forum/index.php...p=1452238 Link to comment Share on other sites More sharing options...
mairhons Posted May 5, 2010 Share Posted May 5, 2010 yes it does, right now im without external monitor, im using my kext ( ATINDRV.kext.zip ATIRadeonX1000.kext.zip ) from here: http://www.insanelymac.com/forum/index.php...p=1452238 and that one righteye gave me: dorkakutya_71DE_x2500_EVOenabler.kext.zip http://www.insanelymac.com/forum/index.php...p=1452238 So, first i install ATINDRV.kext.zip, then ATIRadeonX1000.kext.zip. Do I need the dorkakutya_71DE_x2500_EVOenabler.kext.zip too? Is the order in which i install the Kexts equal? Thank you for your help. Link to comment Share on other sites More sharing options...
dorkakutya Posted May 5, 2010 Share Posted May 5, 2010 So, first i install ATINDRV.kext.zip, then ATIRadeonX1000.kext.zip. Do I need the dorkakutya_71DE_x2500_EVOenabler.kext.zip too? Is the order in which i install the Kexts equal? Thank you for your help. yes yes but evoenabler.kext has two info.plist inside, u have to delete one of them! which one? you have to try... Link to comment Share on other sites More sharing options...
mairhons Posted May 5, 2010 Share Posted May 5, 2010 yesyes but evoenabler.kext has two info.plist inside, u have to delete one of them! which one? you have to try... Ok, i will try that tomorrow. Now are you happy with OsX? Do everything work, USB, LAN, Sound,....? Link to comment Share on other sites More sharing options...
mairhons Posted May 8, 2010 Share Posted May 8, 2010 @dorkakutya I see you used a Retail DVD to install Snow Leopard. Can you tell me which Boot CD you used and which kexts do you need for your TM 5720g? Link to comment Share on other sites More sharing options...
dorkakutya Posted May 8, 2010 Share Posted May 8, 2010 @dorkakutya I see you used a Retail DVD to install Snow Leopard. Can you tell me which Boot CD you used and which kexts do you need for your TM 5720g? Chameleon rc5 as bootcd, im not sure if rc5 is out i got it from the author. but earlier versiont may do it. my kext are in the zip file: Link to comment Share on other sites More sharing options...
mairhons Posted May 8, 2010 Share Posted May 8, 2010 Chameleon rc5 as bootcd, im not sure if rc5 is out i got it from the author. but earlier versiont may do it.my kext are in the zip file: Ok! Where is the zip file? Can you send me your boot cd? Thank you! Link to comment Share on other sites More sharing options...
dorkakutya Posted May 9, 2010 Share Posted May 9, 2010 Ok! Where is the zip file? Can you send me your boot cd? Thank you! have fun, bye! SL_10_6_3_Retail_Acer_TM_5720g.part1.rar SL_10_6_3_Retail_Acer_TM_5720g.part2.rar Link to comment Share on other sites More sharing options...
mairhons Posted May 20, 2010 Share Posted May 20, 2010 have fun, bye! @dorkakutya Thank you for the kexts! I have another problem with the Travelmate 5720g. Until now i tried different Boot cd's (EmpireEFI_V108, [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]). I got kernel panics.... I know i have to create my own Boot cd and to insert your kexts. But now I'm working in MS Windows and I can't edit the Boot-CD (especially the Preboot.dmg from the boot cd). I haven't access to a Mac now. So, dorkakutya, can you send me your Boot-cd file for our TM 5720g? or Can someone tell me how to edit the Boot-cd with Windows to insert my kexts? Thank you. Link to comment Share on other sites More sharing options...
righteye Posted June 13, 2010 Author Share Posted June 13, 2010 4 fallouttt use one of this kexts fallouttt_EVOenabler.kext.zipfallouttt_RadeonHD.kext.zipand also the files related to 10.6.3 update hope it helps cheers Link to comment Share on other sites More sharing options...
fallouttt Posted June 14, 2010 Share Posted June 14, 2010 4 falloutttuse one of this kexts fallouttt_EVOenabler.kext.zipfallouttt_RadeonHD.kext.zipand also the files related to 10.6.3 update hope it helps cheers Thanks... I will try... Link to comment Share on other sites More sharing options...
city10001 Posted June 17, 2010 Share Posted June 17, 2010 Hi righteye! You good programmer and your kext for 10.6.2 working! Thanks again. Now my OS is Snow Leopard 10.6.4 Permission 1280x800 but QE don't working. x1700 128 mb ID :0x71de EDID BYTES: 0x 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F ------------------------------------------------ 00 | 00 FF FF FF FF FF FF 00 04 21 00 00 00 00 00 00 10 | 01 00 01 03 00 00 00 00 00 00 00 00 00 00 00 00 20 | 00 00 00 00 00 00 01 01 01 01 01 01 01 01 01 01 30 | 01 01 01 01 01 01 64 00 00 00 00 00 00 00 00 00 40 | 00 00 00 00 00 00 00 00 00 00 00 10 00 00 00 00 50 | 00 00 00 00 00 00 00 00 00 00 00 00 00 10 00 00 60 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10 70 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 38 Waiting kext Link to comment Share on other sites More sharing options...
righteye Posted June 18, 2010 Author Share Posted June 18, 2010 Hi righteye! You good programmer and your kext for 10.6.2 working! Thanks again. Now my OS is Snow Leopard 10.6.4 Permission 1280x800 but QE don't working. x1700 128 mb ID :0x71de EDID BYTES: 0x 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F ------------------------------------------------ 00 | 00 FF FF FF FF FF FF 00 04 21 00 00 00 00 00 00 10 | 01 00 01 03 00 00 00 00 00 00 00 00 00 00 00 00 20 | 00 00 00 00 00 00 01 01 01 01 01 01 01 01 01 01 30 | 01 01 01 01 01 01 64 00 00 00 00 00 00 00 00 00 40 | 00 00 00 00 00 00 00 00 00 00 00 10 00 00 00 00 50 | 00 00 00 00 00 00 00 00 00 00 00 00 00 10 00 00 60 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10 70 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 38 Waiting kext check my first post cheers Link to comment Share on other sites More sharing options...
city10001 Posted June 19, 2010 Share Posted June 19, 2010 i installed patched ATISupport.kext for 10.6.4 71de and remove ATI1600Controller.kext == nothing then i installed ATIFramebuffer.kext and ATIRadeonX1000.kext for 10.6.2 71de == bad image and don't working system Now permission 1280x800 but QE don't working. i use this kexts permission x1700.zip Waiting kext permission_x1700.zip Link to comment Share on other sites More sharing options...
Recommended Posts