kuba Posted July 11, 2006 Share Posted July 11, 2006 Solaris Bob has a Tiger running on this stuff.... It worked by pure coincidence, since the hardware was already there for Solaris 10 x86 .... CPU: Name Intel Pentium 4 515 Code Name Prescott Specification Intel® Pentium® 4 CPU 2.93GHz Family / Model / Stepping F 4 1 Extended Family / Model 0 0 Package LGA 775 Core Stepping E0 Technology 90 nm Supported Instructions Sets MMX, SSE, SSE2, SSE3 Bus Speed 533.3 MHz L1 Data Cache 16 KBytes, 8-way set associative, 64 Bytes line size L1 Trace Cache 12 Kuops, 8-way set associative L2 Cache 1024 KBytes, 8-way set associative, 64 Bytes line size L2 Speed 2933.4 MHz (Full) Mainboard: Manufacturer MICRO-STAR INTERNATIONAL CO., LTD Model MS-7071, 1.00 BIOS vendor Phoenix Technologies, LTD BIOS revision 6.00 PG BIOS release date 07/28/2005 Chipset VIA P4M800 rev. 00 Southbridge VIA VT8237 rev. 00 Sensor chip Winbond W83627THF Built-in graphic interface: Graphic Interface AGP AGP Status enabled, rev. 3.0 AGP Data Transfer Rate 8x AGP Max Rate 8x AGP Side Band Addressing supported, enabled Built-in sound device: working Built-in ethernet: not working Memory # of memory modules 1 Module 0 Kingston DDR PC3200 - 1024 MBytes Hardisks: WDC WD200BB-00CVB0: Capacity: 20 GB WDC WD84AA: Capacity: 8.00 GB Maxtor 51536U3: Capacity: 16 GB DVD NEC DVD_RW ND-3550A: Revision: 1.05 Link to comment https://www.insanelymac.com/forum/topic/5-supported-hardware/page/4/#findComment-143262 Share on other sites More sharing options...
Dekkar Posted July 23, 2006 Share Posted July 23, 2006 Well Currently i got mac os x working on my dell Precision 670. Works pretty good, i've been trying to tweek with the drivers. My hardware is as follows Dual 3.4 Xeons 8 GB of ECC ram 1 scsi UW HD which os x doesnt see and i cant find drivers for 1 40 gb WD Raptor Nvidia Quadro FX4500 Link to comment https://www.insanelymac.com/forum/topic/5-supported-hardware/page/4/#findComment-149090 Share on other sites More sharing options...
Ratteler Posted September 5, 2006 Share Posted September 5, 2006 I have it running on my Dell Inspiron 8200 laptop.The Specs: 1.4 P4 proccessor, sse2 512mb Ram Ati mobility Radion 9000 64mb vram Sound - I think its internal intel but osx recongnizes it as AC97 Screen Resolution: 1280x1024 at 24bit Speed: Excellent Known problems: Laptop supports 1400x1500 in windows but in OSX screen is scrambled. Trying to get Netgear wireless ethernet card (pcmcia slot) working I just need a fix for the bottom 2 and ill be good to go!! 1 year+ Later... I'm trying to get my Dell Inspiron 8200 to run OS X86. I have a 10.4.6 that work in VMWARE, but when I try get it going native it fails to boot with a B0 error. I have a blank drive in the media bay with 20GB HSF partition that I made in with the Install DVD's Drive utilities. I was hoping to use the BIOS to switch between booting from the Internal Windows drive, and the External OS X drive. Any suggestions? Link to comment https://www.insanelymac.com/forum/topic/5-supported-hardware/page/4/#findComment-182246 Share on other sites More sharing options...
paulicat Posted September 6, 2006 Share Posted September 6, 2006 Dude, b0 error means your osx partition is not set "active" or "bootable" Use fdisk of your choice, either a bootable linux cd or dos fdisk and mark that partition active or bootable (word depends on which fdisk you are using). Link to comment https://www.insanelymac.com/forum/topic/5-supported-hardware/page/4/#findComment-182754 Share on other sites More sharing options...
pirata_blue Posted September 11, 2006 Share Posted September 11, 2006 Mobo = Asrock 775i67G Rev.2 (LAN WORKING, IDE WORKING,AUDIO WORKING BUT NOT THE MIC, SATA NOT TESTED) ram 1 GB DDR 400 Video = ATI Radeon 9800 Pro Sapphire 128 Mb AGP FULL WORKING, mouse tearing (I'll try callisto to change screen resolution now only 1024x 768) Core Image e Quarz working CPU= Intel Celeron D 2.53 (64Bit - sse2 e ss3) Monitor Philips 170C LDC 17" DVD Burner Philips DVDR1660 P1 Full Working Now I need some hint to make the mic work and also other hardware work as Philips webcam Printer All in One Epson Stylus DX4200 (working driver donwloaded form Epson) scanner not tested I used Jas 1.4.3 with success (no success with: 10.4.1 vm floating image patched it was working only under VWware in Xp; no success with Myz 10.4.6) I'll try Jas 10.4.6 Bye Bye Link to comment https://www.insanelymac.com/forum/topic/5-supported-hardware/page/4/#findComment-186238 Share on other sites More sharing options...
whiteboy Posted September 12, 2006 Share Posted September 12, 2006 Just finished installing OSX86 on my PC here is a list of my hardware. CPU Properties: CPU Type Intel Pentium 4, 3000 MHz (15 x 200) CPU Alias Northwood HyperThreading CPU Stepping D1 Instruction Set x86, MMX, SSE, SSE2 Original Clock 3000 MHz Min / Max CPU Multiplier 15x / 15x Engineering Sample No L1 Trace Cache 12K Instructions L1 Data Cache 8 KB L2 Cache 512 KB (On-Die, ECC, ATC, Full-Speed) Multi CPU: Motherboard ID Springdale-G CPU #0 Intel® Pentium® 4 CPU 3.00GHz, 2992 MHz CPU #1 Intel® Pentium® 4 CPU 3.00GHz, 2992 MHz CPU Physical Info: Package Type 478 Pin uPGA Package Size 3.50 cm x 3.50 cm Transistors 55 million Process Technology 6M, 0.13 um, CMOS, Cu, Low-K Die Size 131 mm2 Core Voltage 1.475 - 1.55 V I/O Voltage 1.475 - 1.55 V Typical Power 38.7 - 89.0 W (depending on clock speed) Maximum Power 49 - 109 W (depending on clock speed) CPU Manufacturer: Company Name Intel Corporation Product Information http://www.intel.com/products/processor CPU Utilization: CPU #1 / HTT Unit #1 0 % CPU #1 / HTT Unit #2 0 % Motherboard -------------------------------------------------------------------------------- Motherboard Properties: Motherboard ID 63-0100-000001-00101111-030705-iSPGDL_G$BF865001_BIOS DATE: 03/07/05 16:05:05 VER: 08.00.10 Motherboard Name Intel Bay Field D865GBF Front Side Bus Properties: Bus Type Intel GTL+ Bus Width 64-bit Real Clock 200 MHz (QDR) Effective Clock 800 MHz Bandwidth 6400 MB/s Memory Bus Properties: Bus Type Dual DDR SDRAM Bus Width 128-bit DRAM:FSB Ratio 1:1 Real Clock 200 MHz (DDR) Effective Clock 400 MHz Bandwidth 6400 MB/s Chipset Bus Properties: Bus Type Intel Hub Interface Bus Width 8-bit Real Clock 67 MHz (QDR) Effective Clock 267 MHz Bandwidth 267 MB/s Motherboard Physical Info: CPU Sockets/Slots 1 Expansion Slots 6 PCI, 1 AGP RAM Slots 4 DIMM Integrated Devices Audio, Video, LAN Form Factor ATX Motherboard Size 240 mm x 300 mm Motherboard Chipset i865G I am having issuses with my system not detecting usb devices. Any suggestions on that? Also my ati 9600 Pro AGP can only go to 1024 x 768 and has Artifacts from the mouse. How and I fix these Issues? Where can I get drivers and a tutorial on how to install them. I am kinda new to the Mac world and need a little help. Thanks in advance. Dave Link to comment https://www.insanelymac.com/forum/topic/5-supported-hardware/page/4/#findComment-186435 Share on other sites More sharing options...
etherni Posted September 22, 2006 Share Posted September 22, 2006 My OSx 10.4.6 P4 prescot 3,06 GHz Abit AS8 4x256 MB kingston fsb 800 mhz #1HD 80 GB WD Caviar ATA - (WinXP & Mandriva 2006) #2HD 200 GB Samsung SATA - OS X graph.card GF 6600 GT AGP - works fine,disable 3D acceleration suund card SB Audigy SE PCI - don't work ! net works excelent ,a card is onboard realtec - i have not problem,it's fast and was automatic configure after instalation. Is there anybody know's a method for run my SB Audigy???? Link to comment https://www.insanelymac.com/forum/topic/5-supported-hardware/page/4/#findComment-193708 Share on other sites More sharing options...
sid21177 Posted October 3, 2006 Share Posted October 3, 2006 will the 10.4.8 update (JaS) allow both cores on a core duo to be used ?? i've been reading that u need to disable 1 of the cores for os x to run thx Link to comment https://www.insanelymac.com/forum/topic/5-supported-hardware/page/4/#findComment-200863 Share on other sites More sharing options...
shidlo Posted October 3, 2006 Share Posted October 3, 2006 I installed the Mac Os x on gigabyte GA-M57SLI-S4 motherboard with AMD X2 4200... i works great ... but i need to install the nic and sound deivers... (on board) can u help me? Link to comment https://www.insanelymac.com/forum/topic/5-supported-hardware/page/4/#findComment-201024 Share on other sites More sharing options...
Luissillo Posted October 5, 2006 Share Posted October 5, 2006 I installed Mac Os x on EliteGroup P4VXAS 1.1 with P4 1.5Ghz and It doesn't recognize me the sound integrated on it.Anyone can help me pleas? Thanks Link to comment https://www.insanelymac.com/forum/topic/5-supported-hardware/page/4/#findComment-202631 Share on other sites More sharing options...
tradez Posted October 5, 2006 Share Posted October 5, 2006 I have a new HP dv5000. I was able to setup osx without an issue. I am new to mac's in general though and have no idea where to get drivers for all the hardware, and if I even can. Then once I get them, how do i get them onto the laptop and install them? Will a nero burned ISO simply work and be readable on osx? Link to comment https://www.insanelymac.com/forum/topic/5-supported-hardware/page/4/#findComment-203055 Share on other sites More sharing options...
equilibriumuk Posted October 5, 2006 Share Posted October 5, 2006 My new system is working very well. Specs: E6400 Core2Duo @ 3.2Ghz Asus P5W DH Connect3D X1900XT Patches I've installed: BorisBade (used installer): Works perfectly, no tearing, no corruption, full QE/CI and OpenGL Quake3 seems to run at about half the FPS of windows but still over 500fps on my cfg AzaliaAudio: Sound working very well. I was surprised at how good the onboard sound was, I was using GarageBand within minutes Aberracus' IOPCIFamily: Seemed to sort out a few problems, system booted faster Bliss' Slow Boot Time Patch: Total speedup of booting into OSX, only takes about 12secs I think that was about all. The onboard dual gigabit network worked straight away and the system seems to benchmark faster than a Mac Pro Not sure if I can post on the HCL? Link to comment https://www.insanelymac.com/forum/topic/5-supported-hardware/page/4/#findComment-203065 Share on other sites More sharing options...
drho2004 Posted November 15, 2006 Share Posted November 15, 2006 MSI K8MM-V AMD64 3000+ 1GB RAM Radeon 9800 Pro VIA KT800 Chipset NEC 3540 16x DVD-DL Installed JAS 10.4.6 DVD native on spare 80GB hardrive. Install went fine, took FOREVER. At first USB didnt work, replaced with IOUSBFAMILY.kext i found on the forums. Ethernet didnt work out of the box either, found a VIARHINE kext on the forums too, now it works. 1024X768 resolution only, need to mess with Callisto drivers.QE/CI supported. biggest problem? NO SOUND. ive been looking ALL OVER no luck. if anybody has any ideas, PLEASE HELP. oh yeah one other thing. i cant upload on websites. for example, on youtube, i cannot upload videos, it just times out. suggestions? Link to comment https://www.insanelymac.com/forum/topic/5-supported-hardware/page/4/#findComment-234767 Share on other sites More sharing options...
Recommended Posts