DaemonES Posted April 3, 2008 Author Share Posted April 3, 2008 Mail me. I will forward to you a mail of those guy, who have done port for FreeBSD. He said, that anyway performance is poor. Link to comment https://www.insanelymac.com/forum/topic/40851-attansic-l1-driver-project/page/11/#findComment-694515 Share on other sites More sharing options...
NoSTaBoNN Posted April 3, 2008 Share Posted April 3, 2008 Are there other people that can confirm that the attansic L1 works/is recognised with iATKOS? If so... anybody that can link me to the network related drivers included with iATKOS? Gonna try this while I keep looking for a way to make DaemonES his driver work. Link to comment https://www.insanelymac.com/forum/topic/40851-attansic-l1-driver-project/page/11/#findComment-695237 Share on other sites More sharing options...
Hacktrix2006 Posted April 4, 2008 Share Posted April 4, 2008 Are there other people that can confirm that the attansic L1 works/is recognised with iATKOS?If so... anybody that can link me to the network related drivers included with iATKOS? Gonna try this while I keep looking for a way to make DaemonES his driver work. That a negative sorry. It shows that my L1 is there and Intel 3945 abg is there but after install nothing. I know that Ubuntu has everything working the Wifi and L1 is there anyway to port the driver from ubuntu to osx. Link to comment https://www.insanelymac.com/forum/topic/40851-attansic-l1-driver-project/page/11/#findComment-695814 Share on other sites More sharing options...
DaemonES Posted April 4, 2008 Author Share Posted April 4, 2008 Direct port coudn't be done. Link to comment https://www.insanelymac.com/forum/topic/40851-attansic-l1-driver-project/page/11/#findComment-695821 Share on other sites More sharing options...
NoSTaBoNN Posted April 4, 2008 Share Posted April 4, 2008 So back to the code Link to comment https://www.insanelymac.com/forum/topic/40851-attansic-l1-driver-project/page/11/#findComment-695849 Share on other sites More sharing options...
ali123 Posted April 6, 2008 Share Posted April 6, 2008 "bump" for updates! Link to comment https://www.insanelymac.com/forum/topic/40851-attansic-l1-driver-project/page/11/#findComment-698759 Share on other sites More sharing options...
MadInt Posted April 9, 2008 Share Posted April 9, 2008 He there. Almost got this driver working on my P5KR. Performance is quite poor, thought. So little more time to optimize receiver ring handler. You also need to enter sudo ifconfig en0 media 100BaseTX, cause there are no autonegotiation (sadly) Strongly recommend first try "release" version (debug will cause too much stress to system logger) AttansicL1_OSX.zip Link to comment https://www.insanelymac.com/forum/topic/40851-attansic-l1-driver-project/page/11/#findComment-702716 Share on other sites More sharing options...
NoSTaBoNN Posted April 9, 2008 Share Posted April 9, 2008 You are my hero The performance ain't that bad I can watch youtube without having to wait longer then i have in Vista so thats ok. But i had to use the debug kext, the release said cable was not connecting after setting mediatype. Thanks.. really Link to comment https://www.insanelymac.com/forum/topic/40851-attansic-l1-driver-project/page/11/#findComment-702760 Share on other sites More sharing options...
MadInt Posted April 9, 2008 Share Posted April 9, 2008 But i had to use the debug kext, the release said cable was not connecting after setting mediatype. You may also try ifconfig en0 media 100BaseTX mediaopt full-duplex It seems that PHY code probably broken somewhere. Link to comment https://www.insanelymac.com/forum/topic/40851-attansic-l1-driver-project/page/11/#findComment-702775 Share on other sites More sharing options...
DaemonES Posted April 9, 2008 Author Share Posted April 9, 2008 You may also try ifconfig en0 media 100BaseTX mediaopt full-duplexIt seems that PHY code probably broken somewhere. Not really, look to the FreeBSD driver. Attansic L1 has several revisions, sometimes Linux driver doesn't work too. Autonegotiation works, but setting of 1 gigabit mode not. Anyway, good job. I was afraid, that nobody can finish my job Link to comment https://www.insanelymac.com/forum/topic/40851-attansic-l1-driver-project/page/11/#findComment-702821 Share on other sites More sharing options...
NoSTaBoNN Posted April 9, 2008 Share Posted April 9, 2008 I think i found problem with the release version. If i dont set mediatype to 1000BaseT and then put it back to 100BaseTX it thinks there's no cable Link to comment https://www.insanelymac.com/forum/topic/40851-attansic-l1-driver-project/page/11/#findComment-702841 Share on other sites More sharing options...
MadInt Posted April 9, 2008 Share Posted April 9, 2008 Not really, look to the FreeBSD driver. Attansic L1 has several revisions, sometimes Linux driver doesn't work too. Autonegotiation works, but setting of 1 gigabit mode not. Anyway, good job. I was afraid, that nobody can finish my job Да вобщем-то и думаю большую часть драйвера переписать из BSD, вот только семерку воткну Спасибо за порт, без него точно ничего не получилось бы у меня... Link to comment https://www.insanelymac.com/forum/topic/40851-attansic-l1-driver-project/page/11/#findComment-702961 Share on other sites More sharing options...
Amoralez Posted April 9, 2008 Share Posted April 9, 2008 Да вобщем-то и думаю большую часть драйвера переписать из BSD, вот только семерку воткну Спасибо за порт, без него точно ничего не получилось бы у меня... Гуд ворк только потерь с этими дровами много, но лучше хоть что то чем ничего Good work. Link to comment https://www.insanelymac.com/forum/topic/40851-attansic-l1-driver-project/page/11/#findComment-703102 Share on other sites More sharing options...
MadInt Posted April 10, 2008 Share Posted April 10, 2008 Гуд ворк только потерь с этими дровами много, но лучше хоть что то чем ничего Good work. Ну я много потерь не замечал, имхо все зависит от дуплекса, мой свич очень не любит полудуплекс На полном дуплексе разогнался до 80 мегабит. А латенси действительно ужасный, видимо что-то неладно в коде прерываний, работы еще много... Link to comment https://www.insanelymac.com/forum/topic/40851-attansic-l1-driver-project/page/11/#findComment-703512 Share on other sites More sharing options...
Amoralez Posted April 10, 2008 Share Posted April 10, 2008 Ну я много потерь не замечал, имхо все зависит от дуплекса, мой свич очень не любит полудуплекс На полном дуплексе разогнался до 80 мегабит.А латенси действительно ужасный, видимо что-то неладно в коде прерываний, работы еще много... Потерей тоже уже нет, вчера как только поставил кекс, было все ужасно, сегодня проснулся уже работает нормально. но лейтенси... угук Главное что работает А то я уже отчаялся, полный набор неудачника: жмикрон контролер, 512мб видюха, аттансик л1... Link to comment https://www.insanelymac.com/forum/topic/40851-attansic-l1-driver-project/page/11/#findComment-703516 Share on other sites More sharing options...
MadInt Posted April 10, 2008 Share Posted April 10, 2008 Потерей тоже уже нет, вчера как только поставил кекс, было все ужасно, сегодня проснулся уже работает нормально. но лейтенси... угукГлавное что работает А то я уже отчаялся, полный набор неудачника: жмикрон контролер, 512мб видюха, аттансик л1... [offtop] для жмикрона вроде есть драйвера, по крайней мере у меня завелось. работает правда через раз, но работает! Единственная трабла с загрузкой с DVD, пришлось покупать сатовый привод... У меня из всего моего железа сейчас не работает только PCI'шный SBlive (уж очень я его люблю), видимо им тоже как нибудь займусь... Asus P5KR, Intel E6550 2.33Ghz, Radeon HD3870 512MB... [/offtop] Link to comment https://www.insanelymac.com/forum/topic/40851-attansic-l1-driver-project/page/11/#findComment-703522 Share on other sites More sharing options...
antaholics Posted April 10, 2008 Share Posted April 10, 2008 Hello, I tried the debug driver, and it didn't add a new Network adapter to the list... and I still can't connect. It MIGHT be that the interface (PCI or w/e it is) does not have a driver yet (I'm using a laptop - Asus F3SV), but I'm not really sure. How do I find out? Console spits this message: 10/04/08 5:24:25 AM kernel [AttansicL1Ethernet] AttansicL1Ethernet::outputPacket, length 342 tp_next_to_use=51 10/04/08 5:24:26 AM kernel [AttansicL1Ethernet] SMB RX: rx_ok=0 rx_bcast=0 rx_mcast=0 rx_sz_ov=0 rx_rxf_ov=0 rx_rrd_ov=0 rx_align_err=0 10/04/08 5:24:26 AM kernel [AttansicL1Ethernet] SMB TX: tx_ok=1 tx_exc_defer=0 tx_defer=0 tx_bcast=1 tx_mcast=0 tx_underrun=0 tx_rd_eop=0 tx_trunc=0 10/04/08 5:24:28 AM kernel [AttansicL1Ethernet] AttansicL1Ethernet::outputPacket, length 342 tp_next_to_use=52 10/04/08 5:24:28 AM kernel [AttansicL1Ethernet] SMB RX: rx_ok=0 rx_bcast=0 rx_mcast=0 rx_sz_ov=0 rx_rxf_ov=0 rx_rrd_ov=0 rx_align_err=0 10/04/08 5:24:28 AM kernel [AttansicL1Ethernet] SMB TX: tx_ok=1 tx_exc_defer=0 tx_defer=0 tx_bcast=1 tx_mcast=0 tx_underrun=0 tx_rd_eop=0 tx_trunc=0 10/04/08 5:24:32 AM kernel [AttansicL1Ethernet] AttansicL1Ethernet::outputPacket, length 342 tp_next_to_use=53 10/04/08 5:24:32 AM kernel [AttansicL1Ethernet] SMB RX: rx_ok=0 rx_bcast=0 rx_mcast=0 rx_sz_ov=0 rx_rxf_ov=0 rx_rrd_ov=0 rx_align_err=0 10/04/08 5:24:32 AM kernel [AttansicL1Ethernet] SMB TX: tx_ok=1 tx_exc_defer=0 tx_defer=0 tx_bcast=1 tx_mcast=0 tx_underrun=0 tx_rd_eop=0 tx_trunc=0 10/04/08 5:24:41 AM kernel [AttansicL1Ethernet] AttansicL1Ethernet::outputPacket, length 342 tp_next_to_use=54 10/04/08 5:24:41 AM kernel [AttansicL1Ethernet] SMB RX: rx_ok=0 rx_bcast=0 rx_mcast=0 rx_sz_ov=0 rx_rxf_ov=0 rx_rrd_ov=0 rx_align_err=0 10/04/08 5:24:41 AM kernel [AttansicL1Ethernet] SMB TX: tx_ok=1 tx_exc_defer=0 tx_defer=0 tx_bcast=1 tx_mcast=0 tx_underrun=0 tx_rd_eop=0 tx_trunc=0 10/04/08 5:24:49 AM kernel [AttansicL1Ethernet] AttansicL1Ethernet::outputPacket, length 342 tp_next_to_use=55 10/04/08 5:24:50 AM kernel [AttansicL1Ethernet] SMB RX: rx_ok=0 rx_bcast=0 rx_mcast=0 rx_sz_ov=0 rx_rxf_ov=0 rx_rrd_ov=0 rx_align_err=0 10/04/08 5:24:50 AM kernel [AttansicL1Ethernet] SMB TX: tx_ok=1 tx_exc_defer=0 tx_defer=0 tx_bcast=1 tx_mcast=0 tx_underrun=0 tx_rd_eop=0 tx_trunc=0 10/04/08 5:24:58 AM kernel [AttansicL1Ethernet] AttansicL1Ethernet::outputPacket, length 342 tp_next_to_use=56 10/04/08 5:24:58 AM kernel [AttansicL1Ethernet] SMB RX: rx_ok=0 rx_bcast=0 rx_mcast=0 rx_sz_ov=0 rx_rxf_ov=0 rx_rrd_ov=0 rx_align_err=0 10/04/08 5:24:58 AM kernel [AttansicL1Ethernet] SMB TX: tx_ok=1 tx_exc_defer=0 tx_defer=0 tx_bcast=1 tx_mcast=0 tx_underrun=0 tx_rd_eop=0 tx_trunc=0 10/04/08 5:25:06 AM kernel [AttansicL1Ethernet] AttansicL1Ethernet::outputPacket, length 342 tp_next_to_use=57 10/04/08 5:25:06 AM kernel [AttansicL1Ethernet] SMB RX: rx_ok=0 rx_bcast=0 rx_mcast=0 rx_sz_ov=0 rx_rxf_ov=0 rx_rrd_ov=0 rx_align_err=0 10/04/08 5:25:06 AM kernel [AttansicL1Ethernet] SMB TX: tx_ok=1 tx_exc_defer=0 tx_defer=0 tx_bcast=1 tx_mcast=0 tx_underrun=0 tx_rd_eop=0 tx_trunc=0 10/04/08 5:25:14 AM kernel [AttansicL1Ethernet] AttansicL1Ethernet::outputPacket, length 342 tp_next_to_use=58 Link to comment https://www.insanelymac.com/forum/topic/40851-attansic-l1-driver-project/page/11/#findComment-703563 Share on other sites More sharing options...
MadInt Posted April 10, 2008 Share Posted April 10, 2008 Hello, I tried the debug driver, and it didn't add a new Network adapter to the list... and I still can't connect. It MIGHT be that the interface (PCI or w/e it is) does not have a driver yet (I'm using a laptop - Asus F3SV), but I'm not really sure. How do I find out? Can you paste ifconfig -a output here? Link to comment https://www.insanelymac.com/forum/topic/40851-attansic-l1-driver-project/page/11/#findComment-703569 Share on other sites More sharing options...
link2db Posted April 10, 2008 Share Posted April 10, 2008 I think i found problem with the release version.If i dont set mediatype to 1000BaseT and then put it back to 100BaseTX it thinks there's no cable I can confirm! I set 1000BaseT e back to 100BaseTX, on my Pro31S (F3sa) and network work........with debug drivers..... EDIT (from my F3sa): this is my "ifconfig -a" output: lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 stf0: flags=0<> mtu 1280 en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet6 fe80::21d:60ff:feee:a24d%en0 prefixlen 64 scopeid 0x4 inet 192.4.0.250 netmask 0xffffff00 broadcast 192.4.0.255 ether 00:1d:60:ee:a2:4d media: 100baseTX <half-duplex> status: active supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 100baseTX <half-duplex> 100baseTX <full-duplex> 1000baseT <half-duplex> 1000baseT <full-duplex> fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030 lladdr 00:e0:18:00:03:b7:3d:4b media: autoselect <full-duplex> status: inactive supported media: autoselect <full-duplex> Link to comment https://www.insanelymac.com/forum/topic/40851-attansic-l1-driver-project/page/11/#findComment-703698 Share on other sites More sharing options...
olvko Posted April 10, 2008 Share Posted April 10, 2008 Wow! Indeed it works! Great job and thanks!! Link to comment https://www.insanelymac.com/forum/topic/40851-attansic-l1-driver-project/page/11/#findComment-703751 Share on other sites More sharing options...
Guest undefined Posted April 10, 2008 Share Posted April 10, 2008 am i the only one who doesn't know how to install this? please tell me, please. tell me. tell me, please. Link to comment https://www.insanelymac.com/forum/topic/40851-attansic-l1-driver-project/page/11/#findComment-703771 Share on other sites More sharing options...
MadInt Posted April 10, 2008 Share Posted April 10, 2008 am i the only one who doesn't know how to install this? please tell me, please. tell me. tell me, please. you have to use one of included shell scripts (eg, installrelease.sh) Link to comment https://www.insanelymac.com/forum/topic/40851-attansic-l1-driver-project/page/11/#findComment-703789 Share on other sites More sharing options...
Guest undefined Posted April 10, 2008 Share Posted April 10, 2008 well, i figured that out, but i don't have any kexts in my unzipped zip! i get tons of 'not such file or directory' errors while running scripts Link to comment https://www.insanelymac.com/forum/topic/40851-attansic-l1-driver-project/page/11/#findComment-703799 Share on other sites More sharing options...
DaemonES Posted April 10, 2008 Author Share Posted April 10, 2008 Тупые буржуи undefined look better! And do not post noob questions in the development thread. Link to comment https://www.insanelymac.com/forum/topic/40851-attansic-l1-driver-project/page/11/#findComment-703811 Share on other sites More sharing options...
Guest undefined Posted April 10, 2008 Share Posted April 10, 2008 Тупые буржуи undefined look better! And do not post noob questions in the development thread. i will while after you guys stop speaking russian in non-russian forum Link to comment https://www.insanelymac.com/forum/topic/40851-attansic-l1-driver-project/page/11/#findComment-703826 Share on other sites More sharing options...
Recommended Posts