jalavoui Posted May 7, 2007 Author Share Posted May 7, 2007 moses, nice gui i've just ported networkselector to iwi3945 both iwi2100/3945 are quite unstable - better to keep them as test only for now how do you think the svn tree should be updated? keep the old version (disabled) and add the nsGui to the tree? iwi3945 rev 400 added networkselector the expected behaviour is to do nothing until option (1) is pressed. this version is quite different from 2100/2200 - because of mac80211. i do hope it work the main function - for now - is to enable/disable the driver. this will prevent some kernel panics. http://code.google.com/p/iwidarwin/ about the insanelymac there use to be a list of hardware drivers for mac os x86 can someone check if it still exists and add iwi200 to the driver list? i think it's stable enought to be there iwi3945 can someone check the ipw_send_power_mode2(). i think it needs to be disabled because it causes the Radio Frequency Kill Switch is On: msg the code must also be changed to don't allow bg_alive_Start() to be called - this should only happen after networkselector option (1) is pressed. there's a lot of work to be done... i can check any code you can write. i'd love to fix the hardware bug for good. pm me if interested. can you check in the iwidarwin site - "issues" ? this bug causes lot of cards to not work - if you fix it we all apreciate long message at boot (scanning, etc.) and panic: this means the code is all wrong - i'll fix it iwi2100 rev 401 changed code to stop the driver from scaning, etc until networkselector is called. Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/86/#findComment-360956 Share on other sites More sharing options...
WaldMeister Posted May 7, 2007 Share Posted May 7, 2007 Can't enable/disable, even when i switch and refresh. Rev 400 dmesg.txt ioreg.txt system.txt Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/86/#findComment-360969 Share on other sites More sharing options...
jalavoui Posted May 7, 2007 Author Share Posted May 7, 2007 Can't enable/disable, even when i switch and refresh.Rev 400 i do need someone to check networkselector on the iwi3945.cpp the good think is that it isn't giving kernel panic Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/86/#findComment-360974 Share on other sites More sharing options...
Airfly Posted May 7, 2007 Share Posted May 7, 2007 10.4.9 kernel 8.9.1 rev 400 for iwi3945 no kernel panic and NS show no Mac Address for en1: hello world: send network list Wellcome to the insanelyMac SpacePort 0.1 Adapter en1 (00:00:00:00:00:00) [mode: 1572889 led: on] logs below iwi3945 can someone check the ipw_send_power_mode2(). i think it needs to be disabled because it causes the Radio Frequency Kill Switch is On: msg the code must also be changed to don't allow bg_alive_Start() to be called - this should only happen after networkselector option (1) is pressed. I will trying now, see if what I can do.... Jalavoui, could not find function ipw_send_power_mode2(), how to check ...add new loop function to check the 3945 state? dmesg.txt ioreg.txt system.txt Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/86/#findComment-360988 Share on other sites More sharing options...
jalavoui Posted May 7, 2007 Author Share Posted May 7, 2007 Jalavoui, could not find function ipw_send_power_mode2(), how to check ...add new loop function to check the 3945 state? it's a iolog msg for ipw_send_power_mode() it's in the bg_alive_start() all bugs are in here. the most important thing to do now is to make the option (1) work - it's very needed for make the driver work the iwidarwin site i don't know why i'm unable to put files in the download session. it keep saying that i need to contact the administrator site - well i'm one of them can someone check this? Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/86/#findComment-361011 Share on other sites More sharing options...
chenwk Posted May 7, 2007 Share Posted May 7, 2007 the driver's working fine, but problem with network selector, same as airfly. the logs for iwi3945 rev 400: dmesg.txt system.txt Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/86/#findComment-361041 Share on other sites More sharing options...
jalavoui Posted May 7, 2007 Author Share Posted May 7, 2007 take a look at this page http://support.intel.com/support/notebook/sb/CS-006408.htm you should all go there and sugest intel to add a reference to iwidarwin (Mac OS X driver) site we're doing great things in here Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/86/#findComment-361047 Share on other sites More sharing options...
Airfly Posted May 7, 2007 Share Posted May 7, 2007 take a look at this page http://support.intel.com/support/notebook/sb/CS-006408.htm you should all go there and sugest intel to add a reference to iwidarwin (Mac OS X driver) site we're doing great things in here Just back to home from outside, one of my college classmate just come back from the North for his 5.1 holidays. I take a look on Intel's website. Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/86/#findComment-361076 Share on other sites More sharing options...
drchris Posted May 8, 2007 Share Posted May 8, 2007 i need people to help in the iwi2100 driver if you have linux you could help (see previous posts) Contact me in pm I have one a 2100 3b. Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/86/#findComment-361277 Share on other sites More sharing options...
tprins228 Posted May 8, 2007 Share Posted May 8, 2007 heres the logs from the latest, my dmesg and system txt's are a little different, hope this is a good sign!!! dmesg.txt ioreg.txt system.txt Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/86/#findComment-361291 Share on other sites More sharing options...
LordNite Posted May 8, 2007 Share Posted May 8, 2007 Last logs from .dmg download tody on google project. no boot panic, network selector works but show mac address ff:ff:ff..... ioreg.txt system.txt Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/86/#findComment-361330 Share on other sites More sharing options...
reeiit Posted May 8, 2007 Share Posted May 8, 2007 Here my logs. Seems like everything OK. ( right MAC address) But Networkselector shows: associated MAC 00:00:00:00:00 Thanks for your job! dmesg.txt ioreg.txt system.txt Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/86/#findComment-361461 Share on other sites More sharing options...
toso90 Posted May 8, 2007 Share Posted May 8, 2007 Now 3945ABG works? Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/86/#findComment-361542 Share on other sites More sharing options...
chenwk Posted May 8, 2007 Share Posted May 8, 2007 still in testing mode. Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/86/#findComment-361577 Share on other sites More sharing options...
jalavoui Posted May 8, 2007 Author Share Posted May 8, 2007 iwi3945 rev 404 add code for option (1) turn card on of networkselector http://code.google.com/p/iwidarwin/ use networkselector to turn the card on moses, can you add the status (on/off) to nsGUI when changing power mode? also need to add a routine to check the driver status. if the card switch from off to on it should say "scanning..." if it is already on it should display the status (associated, etc) maybe you can find a way to add a timer for checking the status (i mean a auto-refresh). a 5 second delay will do it change the code in iwi2200.cpp for the case when associating fails - nsGUI should display a error msg when associated to a network you need to disable the "select network" Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/86/#findComment-361594 Share on other sites More sharing options...
chenwk Posted May 8, 2007 Share Posted May 8, 2007 iwi3945 rev 404. logs: dmesg.txt system.txt as for the network selector, can't tell if the card is working or not.. Wellcome to the insanelyMac SpacePort 0.1 Adapter en1 (00:00:00:00:00:00) [mode: 1572889 led: on] 1) Turn card off 2) Network List 3) Switch led 4) Change mode 5) Close Program 0) Refresh Enter Option: 1 Wellcome to the insanelyMac SpacePort 0.1 Adapter en1 (00:00:00:00:00:00) [mode: 1572889 led: on] 1) Turn card off 2) Network List 3) Switch led 4) Change mode 5) Close Program 0) Refresh Enter Option: Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/86/#findComment-361626 Share on other sites More sharing options...
Airfly Posted May 8, 2007 Share Posted May 8, 2007 logs for rev 404 of iwi3945 got before restart after installation. dmesg.txt ioreg.txt system.txt Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/86/#findComment-361684 Share on other sites More sharing options...
FlipHDK Posted May 8, 2007 Share Posted May 8, 2007 Hey, finallly finished most of my school work and coursewor/exams. Hows this project going? Ive got a few questions: Network Selector or (nsGUI) is this built into the iwi3945.dmg or do you have to compile your own? Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/86/#findComment-361825 Share on other sites More sharing options...
yzf600 Posted May 8, 2007 Share Posted May 8, 2007 Great work to all involved, I also got a message from network selector that ID 00.00.00.00 and was unable to see any networks. I do have two network adapters in system profile and they both show unique mac addresses. Looks like great progress. Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/86/#findComment-361840 Share on other sites More sharing options...
JSn1™ Posted May 8, 2007 Share Posted May 8, 2007 iwi3945 - Rev 404 Interface detected: en5 Mac Address: Detected Fine & matching the adaptor No Panic Network Selector: No Mac Wellcome to the insanelyMac SpacePort 0.1 Adapter en5 (00:00:00:00:00:00) [mode: 1572889 led: on] 1) Turn card off 2) Network List 3) Switch led 4) Change mode 5) Close Program 0) Refresh Enter Option: Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/86/#findComment-361878 Share on other sites More sharing options...
cmanbrown Posted May 9, 2007 Share Posted May 9, 2007 iwi3945 rev 404, no panic, device id ok within system profiler. MAC address matches hardware. System freezes after selecting option (1) of networkselector from within Aqua... Kernel Panic when option (1) is selected from within networkselector when booting with -s option see picture for more info!! WOW A lot of progress has been made since my last post!! Great job to everyone! Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/86/#findComment-361956 Share on other sites More sharing options...
LordNite Posted May 9, 2007 Share Posted May 9, 2007 iwi3945 rev 404, no panic, device id ok within system profiler. MAC address matches hardware. System freezes after selecting option (1) of networkselector from within Aqua... Kernel Panic when option (1) is selected from within networkselector when booting with -s option see picture for more info!! WOW A lot of progress has been made since my last post!! Great job to everyone! Hey cmanbrown, the same happens with me... OSX crashes when selects option 1 ... and the mac address thats appear is 00:00:00... but... great progresss jalavoui is very good! Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/86/#findComment-361960 Share on other sites More sharing options...
tprins228 Posted May 9, 2007 Share Posted May 9, 2007 new logs, no panic, i dont think the networkselector is working, here is the output: Wellcome to the insanelyMac SpacePort 0.1 Adapter en1 (00:00:00:00:00:00) [mode: 1572889 led: on] 1) Turn card off 2) Network List 3) Switch led 4) Change mode 5) Close Program 0) Refresh Enter Option: 1 Wellcome to the insanelyMac SpacePort 0.1 Adapter en1 (00:00:00:00:00:00) [mode: 1572889 led: on] 1) Turn card off 2) Network List 3) Switch led 4) Change mode 5) Close Program 0) Refresh Enter Option: dmesg.txt system.txt Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/86/#findComment-361965 Share on other sites More sharing options...
prussiap Posted May 9, 2007 Share Posted May 9, 2007 Hey guys.. sorry i got myself a nasty cold and passed out for a coupla days.. here are my log for the latest (400? ) networkselect crashes my comp if i hit one or anything.. Also i'm still confused about the device id/product id.. should i change something for my card? or is my card good for now ? i'm including in the last picture a device info i got from ubuntu. maybe that helps ? Thakns again for the great work everyone. David dmesg.txt ioreg.txt Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/86/#findComment-361969 Share on other sites More sharing options...
MZStannY Posted May 9, 2007 Share Posted May 9, 2007 when i usethe networkselector, i can select the right network and i can connect, but then, i cannot go on the internet... but the other computers here (all windows) can go on the internet and can ping my laptop where i got mac os x 10.4.7 installed on... somebody got some help??? Link to comment https://www.insanelymac.com/forum/topic/36976-intel-wireless-driver/page/86/#findComment-362303 Share on other sites More sharing options...
Recommended Posts