AudioGod's Aorus Z390 Pro Patched DSDT Mini Guide and Discussion

[AudioGod]

15 minutes ago, dsynos80 said:

It must be corsair specific really. I have the NZXT Kraken X62 plugged in the internal usb and never encountered any issues. Pure luck.

no it seems to be a strictly Corsair thing although there may be other things that do it but I’m yet to see it.

[Praetorianus]

19 hours ago, AudioGod said:

MacOS does not like anything made by Corsair connected via the internal usb hub. 
It’s a constant trouble maker for a lot of people.

searching the net I found this here:

 

https://www.tonymacx86.com/threads/corsair-hydro-h100i-v2.194193/page-3

 

as I'm using Opencore I haven't tested it, because this solution was made for the clover.

[AudioGod]

Just now, Praetorianus said:

searching the net I found this here:

 

https://www.tonymacx86.com/threads/corsair-hydro-h100i-v2.194193/page-3

 

as I'm using Opencore I haven't tested it, because this solution was made for the clover.

I can’t stand that patch, Glasgood used to use it, I’m part of the remove the usb internal connection crew.

[nelio33]

Hello,

 

i have an issue with sleep, i try to solve it with fix on first post without sucess, when i remove usb cable (bluetooth) from motherboard "HS11" sleep work... my combo card is BCM943602CS, any idea to solve it thanks.

 

Edited April 19, 2020 by nelio33

[AudioGod]

43 minutes ago, nelio33 said:

Hello,

 

i have an issue with sleep, i try to solve it with fix on first post without sucess, when i remove usb cable (bluetooth) from motherboard "HS11" sleep work... my combo card is BCM943602CS, any idea to solve it thanks.

 

Check your power settings in hackintool and correct if need be and then use this if your not already

 

https://github.com/acidanthera/AirportBrcmFixup

 

2 minutes ago, eSaF said:

@ nelio33 - proper port mapping will sort that problem for you.

Yes there’s also that aswell unless your using my clover EFI and then it’s irrelevant.

Edited April 19, 2020 by AudioGod

[nelio33]

35 minutes ago, eSaF said:

@ nelio33 - proper port mapping will sort that problem for you.

 

mapping on config.plist is not good  ?

 

35 minutes ago, AudioGod said:

Check your power settings in hackintool and correct if need be and then use this if your not already

 

https://github.com/acidanthera/AirportBrcmFixup

 

Yes there’s also that aswell unless your using my clover EFI and then it’s irrelevant.

 

i use your EFI RX.. with F12d bios, bluetooth and wifi work fine.

Edited April 19, 2020 by nelio33
file

[pkdesign]

I've got a question to the WiFi version owners of this board. Have any of you replaced the the Intel® Wireless-AC 9560 M.2 module within the backplate area?

[pkdesign]

I'm trying to find info on this and whether it would work. Seems like a simple (?) fix for pro WiFi boards. Probably not worth the trouble

 

EDIT:
Hmm, it looks like the CNVi slot is not even compatible with M.2 Type E card so you can not just plug a replacement card in that slot.

Edited April 19, 2020 by pkdesign

[nikhil96widhani]

On 4/19/2020 at 1:49 PM, nelio33 said:

 

mapping on config.plist is not good  ?

 

 

i use your EFI RX.. with F12d bios, bluetooth and wifi work fine.

i have the same issue with Fenvi T919 i face same problem of computer coming back from sleep. I will appreciate any solutions, Thanks

[AudioGod]

16 minutes ago, nikhil96widhani said:

i have the same issue with Fenvi T919 i face same problem of computer coming back from sleep. I will appreciate any solutions, Thanks

Try moving it to a different slot on the board.

the lowest two pcie slots are the best two too use.

[AudioGod]

16 minutes ago, nikhil96widhani said:

i have the same issue with Fenvi T919 i face same problem of computer coming back from sleep. I will appreciate any solutions, Thanks

Try moving it to a different slot on the board.

the lowest two pcie slots are the best two too use.

[pkdesign]

I've updated Clover v5113 and all is working well.

[nikhil96widhani]

3 hours ago, AudioGod said:

Try moving it to a different slot on the board.

the lowest two pcie slots are the best two too use.

i tried all pcie slots and i face same issue. When i click sleep it goes to sleep for 2-3 mins (all rgb lights and fans are off) and all fans start again without waking screen. When i remove usb power cord for adapter sleeps work fine.

On my machine i have everything working even sidecar wirelessly and netflix on safari and thanks to audiogod and this wonderful people on this thread but only sleep dosent function properly. IF THAT WORKS I WILL HAVE 100% working hackintosh.

[AudioGod]

11 minutes ago, nikhil96widhani said:

i tried all pcie slots and i face same issue. When i click sleep it goes to sleep for 2-3 mins (all rgb lights and fans are off) and all fans start again without waking screen. When i remove usb power cord for adapter sleeps work fine.

On my machine i have everything working even sidecar wirelessly and netflix on safari and thanks to audiogod and this wonderful people on this thread but only sleep dosent function properly. IF THAT WORKS I WILL HAVE 100% working hackintosh.

Have you checked your power settings in hackintool are correct and repair them if they are not?

if not then do so buddy.

Also again using hackintool repair your permissions and rebuild your cache then restart and at the bootpicker reset your nvram (F11 if using clover)

Edited April 20, 2020 by AudioGod

[nelio33]

9 hours ago, AudioGod said:

Have you checked your power settings in hackintool are correct and repair them if they are not?

if not then do so buddy.

Also again using hackintool repair your permissions and rebuild your cache then restart and at the bootpicker reset your nvram (F11 if using clover)

 

Hi, i always have the same fault
before the update to catalina the sleep function worked correctly on mojave.

I did without result:

corsair patch use
reset bios parameter
use F12d profile
pcie port change
correction of parameters by hackintool
creation of a kext usb with hackintool

when using the sleep i have instant wake, the card is BCM943602CS.

if i remove the cable from usb header sleep work fine
 
an idea ? thanks

[AudioGod]

21 minutes ago, nelio33 said:

 

Hi, i always have the same fault
before the update to catalina the sleep function worked correctly on mojave.

I did without result:

corsair patch use
reset bios parameter
use F12d profile
pcie port change
correction of parameters by hackintool
creation of a kext usb with hackintool

when using the sleep i have instant wake, the card is BCM943602CS.

if i remove the cable from usb header sleep work fine
 
an idea ? thanks

I use the exact same combo card as you and sleep isn’t as issue.

this is certainly not caused by the EFI unfortunately so my advise is the same advise to you that I gave to last person I replied to about this.

check your power in hackintoool, repair permissions and rebuild your cache. Use airportfixup.kext, clear your nvram. 
 

@nelio33 What EFI are you using and from date? If your using one of my EFIs have you changed the usb mapping on it or are you running with my mapping?

 

@nikhil96widhani Can you fill in your signature with your system spec please so I know what your using parts wise?

Edited April 21, 2020 by AudioGod

[AudioGod]

@nelio33 Could you post your EFI up for me to look at for you please buddy?

[nelio33]

1 hour ago, AudioGod said:

I use the exact same combo card as you and sleep isn’t as issue.

this is certainly not caused by the EFI unfortunately so my advise is the same advise to you that I gave to last person I replied to about this.

check your power in hackintoool, repair permissions and rebuild your cache. Use airportfixup.kext, clear your nvram. 
 

@nelio33 What EFI are you using and from date? If your using one of my EFIs have you changed the usb mapping on it or are you running with my mapping?

 

@nikhil96widhani Can you fill in your signature with your system spec please so I know what your using parts wise?

i use your EFI, for usb i use this guide : https://www.tonymacx86.com/threads/the-new-beginners-guide-to-usb-port-configuration.286553/

I don't know if what I did was to map the usb or not...

 

 

13 minutes ago, AudioGod said:

@nelio33 Could you post your EFI up for me to look at for you please buddy?

yes, thanks.

EFI.zip

[AudioGod]

@nelio33 oh bro I see what problem is straight away. My Clover EFI is pre setup via a DSDT and SSDT to give you native USB from out of the box. You do not need any of the extra SSDTS you are using or any extra kexts so lets start again for you and the EFI.

Please Use this EFI im sending you and do nothing to it other then put it in your EFI Partition and try it.

I have done everything for you brother.

Let me know if its all perfect now? Should Be.

 

nelio33 EFI.zip

 

[AudioGod]

@nelio33 I didn't know if you have your MSR unlocked or not so I left KernelPM Enabled. Disable it (Untick it) if you have your MSR Unlocked (If your using my Bios Profile). 

 

@nikhil96widhani Could you also post your EFI filled in for me to look at and correct if need be for you?

Edited April 21, 2020 by AudioGod

[nelio33]

19 minutes ago, AudioGod said:

@nelio33 oh bro I see what problem is straight away. My Clover EFI is pre setup via a DSDT and SSDT to give you native USB from out of the box. You do not need any of the extra SSDTS you are using or any extra kexts so lets start again for you and the EFI.

Please Use this EFI im sending you and do nothing to it other then put it in your EFI Partition and try it.

I have done everything for you brother.

Let me know if its all perfect now? Should Be.

 

nelio33 EFI.zip

 

same way , hackintosh sleep and i have immediately instant wake, i untick kernelpm.

[AudioGod]

12 minutes ago, nelio33 said:

same way , hackintosh sleep and i have immediately instant wake, i untick kernelpm.

Did you use my EFI without adding anything what so ever?

you just dropped it into your Efi partition and restarted and cleared your nvram at the boot picker?

 

whats the make of the card your using?

not the cm card but the adaptor it’s plugging into?

who made it!

Edited April 21, 2020 by AudioGod

[nelio33]

1 hour ago, AudioGod said:

Did you use my EFI without adding anything what so ever?

you just dropped it into your Efi partition and restarted and cleared your nvram at the boot picker?

 

whats the make of the card your using?

not the cm card but the adaptor it’s plugging into?

who made it!

- i use your EFI without modification or adding.

- i mount my efi partition backup my original an delete folder "efi" and dropped your Efi, nvram i try at the boot picker with F11 i can't find it, how to finf it ?

 i try this "sudo nvram -c"  i have this error on terminal "nvram: Error clearing firmware variables: (iokit/common) not permitted"

- i make you a photo about card, i buy it already maked

 

1 hour ago, AudioGod said:

Did you use my EFI without adding anything what so ever?

you just dropped it into your Efi partition and restarted and cleared your nvram at the boot picker?

 

whats the make of the card your using?

not the cm card but the adaptor it’s plugging into?

who made it!

- i use your EFI without modification or adding.

- i mount my efi partition backup my original an delete folder "efi" and dropped your Efi, nvram i try at the boot picker with F11 i can't find it, how to finf it ?

 i try this "sudo nvram -c"  i have this error on terminal "nvram: Error clearing firmware variables: (iokit/common) not permitted"

- i make you a photo about card, i buy it already maked

 

[AudioGod]

@nelio33 https://github.com/acidanthera/BrcmPatchRAM

Read the instructions on the front page so you do it correctly.

 

@nelio33 Here I done it for you, Drop these kexts into your kext folder in the efi and restart and tell me if that fixes it for you?

BrcmPatchRAM-2.zip

Edited April 21, 2020 by AudioGod

[nelio33]

i clear nvram, with f11 but nothing confirmation. same issue.

 

i inplug catalina ssd i plug mojave ssd sleep work fine on mojave (have a patch make by Glasgood)