Jump to content

AppleHDA Solution - Work in progress

Taruga

By Taruga,
in AppleHDA

 Share
4108 posts in this topic

Recommended Posts

Marius
Marius
Posted
Posted
My Dell DXP061 has an integrated sound card, it says STAC9227 on the chip. So I tried to use the AppleHDA Patcher version 1.7 with the linux codec dump I got from Knoppix. But it does not work. The patcher seems working fine and updated ALCinject and AppleHDA, once I rebooted the machine, it still says no sound card.

 

Taruga, can you help on this. The attached is the linux codec dump. Comparing it with the one from the post #1, only significant difference I can see is the subsystemId.

 

Any help will be appreciated.

 

hi sundevils, how can i extract linux codec dump?

thx

jharleman
jharleman
Posted
Posted

Alright, there are soooo many emails that I don't have a lot of hope, but here goes....I am trying to hack a hack to see what can be achieved.

 

At the moment I have a Analog Devices 1984 (AD1984) driven my Intel SoundMax via ICH8m mobo on my ThinkPad T61p (same as T61s and X61s). After a lot of reading and some experimenting this is what I have:

 

AppleHDA.kext -- hacked my device ID (hex 11d41984 dec 299112836) into the info.plist as well as the binary following the guide. Know I got these right.

 

AppleHDAController.kext--(for noobs this is a plugin inside the AppleHDA.kext) hacked my device ID into the info.plist and specifically the HDAConfigDefault. I did not find anywhere inside the binary to edit....

 

ALCInject--for experimental purposes using the layout from a 1986a....Didn't see anything to hack in here.....Want to get the Controller to load and then will move on to this....

 

Now, this is what I am getting:

 

| | +-o HDEF@1B <class IOPCIDevice, registered, matched, active, busy 1,$

| | | | {

| | | | "IOPCIResourced" = Yes

| | | | "IOInterruptControllers" = ("io-apic-0","IOPCIMessagedInterrupt$

| | | | "IOName" = "pci8086,284b"

| | | | "subsystem-id" = <ac200000>

| | | | "IOPCIExpressLinkCapabilities" = 0

| | | | "IODeviceMemory" = (({"address"=18446744073678225408,"length"=1$

| | | | "layout-id" = <0c000000>

| | | | "class-code" = <00030400>

| | | | "IOPowerManagement" = {"ChildrenPowerState"=2,"CurrentPowerStat$

| | | | "revision-id" = <03000000>

| | | | "IOInterruptSpecifiers" = (<1100000007000000>,<0700000000000100$

| | | | "assigned-addresses" = <10d8008200000000000022fe000000000040000$

| | | | "built-in" = <00>

| | | | "IOPCIMSIMode" = Yes

| | | | "device-id" = <4b280000>

| | | | "vendor-id" = <86800000>

| | | | "acpi-path" = "IOACPIPlane:/_SB/PCI0@0/HDEF@1b0000"

| | | | "subsystem-vendor-id" = <aa170000>

| | | | "name" = "pci8086,284b"

| | | | "IOPCIExpressLinkStatus" = 0

| | | | "reg" = <00d800000000000000000000000000000000000010d80002000000$

| | | | "compatible" = <"pci17aa,20ac","pci8086,284b","pciclass,040300"$

| | | | }

| | | |

| | | +-o AppleHDAController <class AppleHDAController, registered, matc$

| | | | {

| | | | "IOProviderClass" = "IOPCIDevice"

| | | | "IOProbeScore" = 0

| | | | "CFBundleIdentifier" = "com.apple.driver.AppleHDAController"

| | | | "HDAConfigDefault" = ({"CodecID"=299112838,"ConfigData"=<>,"F$

| | | | "IOPCIPrimaryMatch" = "0x793a1002 0x437a1002 0x43831002 0x269$

| | | | "IOMatchCategory" = "IODefaultMatchCategory"

| | | | "IOClass" = "AppleHDAController"

| | | | "IOPowerManagement" = {"CurrentPowerState"=2,"DeviceChangePow$

| | | | }

| | | |

| | | +-o IOHDACodecDevice@0 <class IOHDACodecDevice, registered, matc$

| | | | | {

| | | | | "IOHDACodecVendorID" = 299112836

| | | | | "IOHDACodecRevisionID" = 1049600

| | | | | }

| | | | |

| | | | +-o IOHDACodecDriver <class IOHDACodecDriver, !registered, !ma$

| | | | | {

| | | | | "IOProviderClass" = "IOHDACodecDevice"

| | | | | "IOProbeScore" = 0

| | | | | "IOMatchCategory" = "IODefaultMatchCategory"

| | | | | "IOClass" = "IOHDACodecDriver"

| | | | | "CFBundleIdentifier" = "com.apple.iokit.IOHDAFamily"

| | | | | }

| | | | |

| | | | +-o IOHDACodecFunction@1 <class IOHDACodecFunction, register$

| | | | | {

| | | | | "IOHDACodecFunctionSubsystemID" = 397025467

| | | | | "IOHDACodecFunctionGroupType" = 1

| | | | | }

| | | | |

| | | | +-o AppleHDACodecGeneric <class AppleHDACodecGeneric, regi$

| | | | | {

| | | | | "IOProviderClass" = "IOHDACodecFunction"

| | | | | "IOProbeScore" = 0

| | | | | "IOHDACodecFunctionGroupType" = 1

| | | | | "IOMatchCategory" = "IODefaultMatchCategory"

| | | | | "IOClass" = "AppleHDACodecGeneric"

| | | | | "CFBundleIdentifier" = "com.apple.driver.AppleHDA"

| | | | | }

| | | | |

| | | | +-o AppleHDADriver <class AppleHDADriver, !registered, !$

| | | | {

| | | | "IOProbeScore" = 0

| | | | "CodecInfo" = ({"AnalogOut"={"SignalProcessing"={"V$

| | | | "IOAudioDeviceManufacturerName" = "ManufacturerName$

| | | | "InputSampleLatency" = 30

| | | | "CFBundleIdentifier" = "com.apple.driver.AppleHDA"

| | | | "Layouts" = ({"LayoutID"=12,"PathMapRef"=({"Outputs$

| | | | "IOMatchCategory" = "IODefaultMatchCategory"

| | | | "IOAudioDeviceLocalizedBundle" = "AppleHDA.kext"

| | | | "IOAudioDeviceShortName" = "DeviceShortName"

| | | | "PathMaps" = ({"PathMap"=(((({"NodeID"=27},{"Amp"={$

| | | | "IOProviderClass" = "AppleHDACodec"

| | | | "IOAudioDeviceCanBeDefaults" = 7

| | | | "IOAudioDeviceTransportType" = 1651274862

| | | | "IOAudioDeviceName" = "DeviceName"

| | | | "IOAudioDeviceModelID" = "AppleHDA:12"

| | | | "SampleOffsetPad" = 260

| | | | "IOClass" = "AppleHDADriver"

| | | | "OutputSampleLatency" = 30

| | | | }

| | | |

| | | +-o IOHDACodecDevice@1 <class IOHDACodecDevice, registered, matc$

| | | | {

| | | | "IOHDACodecVendorID" = 351349754

| | | | "IOHDACodecRevisionID" = 589824

| | | | }

| | | |

| | | +-o IOHDACodecDriver <class IOHDACodecDriver, !registered, !ma$

| | | | {

| | | | "IOProviderClass" = "IOHDACodecDevice"

| | | | "IOProbeScore" = 0

| | | | "IOMatchCategory" = "IODefaultMatchCategory"

| | | | "IOClass" = "IOHDACodecDriver"

| | | | "CFBundleIdentifier" = "com.apple.iokit.IOHDAFamily"

| | | | }

| | | |

| | | +-o IOHDACodecFunction@2 <class IOHDACodecFunction, register$

| | | {

| | | "IOHDACodecFunctionSubsystemID" = 397025307

| | | "IOHDACodecFunctionGroupType" = 2

| | | }

 

Notice that HDAConfigDefault is stil lthe 1986 and not the 1984 that I entered. Can't figure this one out and any guidance would be appreciated! Thanks a mil - jl

Marius
Marius
Posted
Posted
hey, any news about ADI1986A? i have 2ch out, no in. attached my codec dump from knoppix. if anyone have any suggestions pls write. tried patcher 1.13-1.17. nothing seems to work. they just give me line out w/o volume control. AzaliaAudio.kext gives me 2ch out WITH volume control

 

 

hi braveskunk pls tell me how i can get codec dump from linux.

 

thx

sese
sese
Posted
Posted

I have an Inspiron 1420 with sigmatel 9228 and i dumped my codec from a gutsy install thats audio was working and when i use this patcher it only will play audio if i plug headphones into the first port. It has 2 speakers, 2 headphone outputs, one internal mic input and one mic input i attached the codec dump.

Codec: SigmaTel STAC9228
Address: 0
Vendor Id: 0x83847616
Subsystem Id: 0x10280209
Revision Id: 0x100201
Default PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: ofs=0x00, nsteps=0x0e, stepsize=0x05, mute=0
Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1
Node 0x02 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x66 0x66]
Power: 0x0
Node 0x03 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0xff 0xff]
Power: 0x0
Node 0x04 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0xff 0xff]
Power: 0x0
Node 0x05 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x66 0x66]
Power: 0x0
Node 0x06 [Vendor Defined Widget] wcaps 0xfd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0xff 0xff]
Power: 0x0
Node 0x07 [Audio Input] wcaps 0x1d0541: Stereo
Power: 0x0
Connection: 1
0x1b
Node 0x08 [Audio Input] wcaps 0x1d0541: Stereo
Power: 0x0
Connection: 1
0x1c
Node 0x09 [Audio Input] wcaps 0x1d0541: Stereo
Power: 0x0
Connection: 1
0x1d
Node 0x0a [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x08173f: IN OUT HP Detect
Pin Default 0x0221101f: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Black
Pin-ctls: 0xc0: OUT HP
Connection: 2
0x02* 0x03
Node 0x0b [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x08173f: IN OUT HP Detect
Pin Default 0x40f000f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x00:
Connection: 2
0x02* 0x03
Node 0x0c [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x081737: IN OUT Detect
Pin Default 0x40f000f1: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x00:
Connection: 1
0x03
Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x08173f: IN OUT HP Detect
Pin Default 0x90170110: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
Pin-ctls: 0x40: OUT
Connection: 1
0x02
Node 0x0e [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x081737: IN OUT Detect
Pin Default 0x02a11030: [Jack] Mic at Ext Front
Conn = 1/8, Color = Black
Pin-ctls: 0x24: IN
Connection: 1
0x04
Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x081737: IN OUT Detect
Pin Default 0x02011020: [Jack] Line Out at Ext Front
Conn = 1/8, Color = Black
Pin-ctls: 0x40: OUT
Connection: 1
0x05
Node 0x10 [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0837: IN OUT Detect
Pin Default 0x40f000f2: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x00:
Connection: 1
0x04
Node 0x11 [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0837: IN OUT Detect
Pin Default 0x40f000f3: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x00:
Connection: 1
0x03
Node 0x12 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x40f000f4: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x00:
Node 0x13 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x90a60040: [Fixed] Mic at Int N/A
Conn = Digital, Color = Unknown
Pin-ctls: 0x20: IN
Node 0x14 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x40f000f5: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x00:
Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 9
0x0e* 0x12 0x0f 0x0b 0x0c 0x0d 0x0a 0x10 0x11
Node 0x16 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 9
0x0e* 0x12 0x0f 0x0b 0x0c 0x0d 0x0a 0x10 0x11
Node 0x17 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 9
0x0e* 0x12 0x0f 0x0b 0x0c 0x0d 0x0a 0x10 0x11
Node 0x18 [Audio Selector] wcaps 0x300103: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Connection: 1
0x15
Node 0x19 [Audio Selector] wcaps 0x300103: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Connection: 1
0x16
Node 0x1a [Audio Selector] wcaps 0x300103: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Connection: 1
0x17
Node 0x1b [Audio Selector] wcaps 0x30090d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 3
0x18* 0x13 0x14
Node 0x1c [Audio Selector] wcaps 0x30090d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 3
0x19* 0x13 0x14
Node 0x1d [Audio Selector] wcaps 0x30090d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 3
0x1a* 0x13 0x14
Node 0x1e [Audio Output] wcaps 0x40211: Stereo Digital
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Node 0x1f [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital
Node 0x20 [Audio Input] wcaps 0x140311: Stereo Digital
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Connection: 1
0x22
Node 0x21 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x185610a0: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Black
Pin-ctls: 0x00:
Connection: 5
0x1e* 0x1f 0x1b 0x1c 0x1d
Node 0x22 [Pin Complex] wcaps 0x430681: Stereo Digital
Pincap 0x0810024: IN EAPD Detect
Pin Default 0x40f000f6: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x00:
Power: 0x0
Node 0x23 [beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0
Amp-Out vals: [0x00]
Node 0x24 [Volume Knob Widget] wcaps 0x600000: Mono

Hobnail_Hobnail
Hobnail_Hobnail
Posted
Posted

Just wanted to give a big thanks to Taruga for coming up with AppleHDAPatcher. I've been struggling to get sound going on my SZ230P Sony Vaio and how it works! :D

Now just need WiFi ;)

 

Uphuck 10.4.9 r2

 

Enclosed is my codec dump if anyone needs it. I tried a lot of dumps I found on the forum but none worked so I decided I needed one from my machine. Don't assume just because a dump is for you're sound card or chipset that it will work for you.

 

I used Ubuntu live CD to obtain the codec dump for the Sony. Just d/l Ubuntu, burn it, boot it. Open a terminal and type:

 

cat /proc/asound/card0/codec#0

 

I copied the output to a text file and gave it a name, then copied it over to a USB drive. I booted back to Tiger, mounted the USB drive and then dragged the dump file over the AppleHDAPatcher icon on my desktop, input my password and it did the rest.

 

Thanks again Taruga!

 

Hobs

 

Sony Vaio SZ230P dump:

 

 

Codec: SigmaTel STAC7661

Address: 0

Vendor Id: 0x83847661

Subsystem Id: 0x104d0700

Revision Id: 0x104201

Default PCM: rates 0x7e0, bits 0x0e, types 0x1

Default Amp-In caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1

Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1

Node 0x02 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out

Amp-Out caps: N/A

Amp-Out vals: [0x1a 0x1a]

Power: 0x0

Node 0x03 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out

Amp-Out caps: N/A

Amp-Out vals: [0xff 0xff]

Power: 0x0

Node 0x04 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out

Amp-Out caps: N/A

Amp-Out vals: [0xff 0xff]

Power: 0x0

Node 0x05 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out

Amp-Out caps: N/A

Amp-Out vals: [0x1a 0x1a]

Power: 0x0

Node 0x06 [Audio Input] wcaps 0x1d0541: Stereo

Power: 0x0

Connection: 1

0x07

Node 0x07 [Audio Selector] wcaps 0x300903: Stereo Amp-In

Amp-In caps: N/A

Amp-In vals: [0x00 0x00]

Connection: 1

0x0e

Node 0x08 [Audio Input] wcaps 0x1d0541: Stereo

Power: 0x0

Connection: 1

0x09

Node 0x09 [Audio Selector] wcaps 0x300903: Stereo Amp-In

Amp-In caps: N/A

Amp-In vals: [0x80 0x80]

Connection: 1

0x15

Node 0x0a [Pin Complex] wcaps 0x400181: Stereo

Pincap 0x08173c: IN OUT HP Detect

Pin Default 0x012110f0: [Jack] HP Out at Ext Rear

Conn = 1/8, Color = Black

Pin-ctls: 0xc0: OUT HP

Connection: 1

0x02

Node 0x0b [Pin Complex] wcaps 0x400181: Stereo

Pincap 0x0814: OUT Detect

Pin Default 0x40f000fb: [N/A] Other at Ext N/A

Conn = Unknown, Color = Unknown

Pin-ctls: 0x00:

Connection: 1

0x04

Node 0x0c [Pin Complex] wcaps 0x400181: Stereo

Pincap 0x0814: OUT Detect

Pin Default 0x40f000fc: [N/A] Other at Ext N/A

Conn = Unknown, Color = Unknown

Pin-ctls: 0x00:

Connection: 1

0x03

Node 0x0d [Pin Complex] wcaps 0x400181: Stereo

Pincap 0x08173c: IN OUT HP Detect

Pin Default 0x41a15020: [N/A] Mic at Ext Rear

Conn = 1/8, Color = Red

Pin-ctls: 0x24: IN

Connection: 1

0x02

Node 0x0e [Pin Complex] wcaps 0x400081: Stereo

Pincap 0x0824: IN Detect

Pin Default 0x90370060: [Fixed] CD at Int N/A

Conn = Analog, Color = Unknown

Pin-ctls: 0x20: IN

Node 0x0f [Pin Complex] wcaps 0x400181: Stereo

Pincap 0x0814: OUT Detect

Pin Default 0x90170010: [Fixed] Speaker at Int N/A

Conn = Analog, Color = Unknown

Pin-ctls: 0x40: OUT

Connection: 1

0x05

Node 0x10 [Audio Output] wcaps 0x40211: Stereo Digital

PCM: rates 0x3e0, bits 0x0e, types 0x5

Node 0x11 [Pin Complex] wcaps 0x400301: Stereo Digital

Pincap 0x0810: OUT

Pin Default 0x40f000fd: [N/A] Other at Ext N/A

Conn = Unknown, Color = Unknown

Pin-ctls: 0x00:

Connection: 2

0x10* 0x09

Node 0x12 [Audio Input] wcaps 0x140311: Stereo Digital

PCM: rates 0x160, bits 0x0e, types 0x5

Connection: 1

0x13

Node 0x13 [Pin Complex] wcaps 0x440381: Stereo Digital

Pincap 0x0834: IN OUT Detect

Pin Default 0x40f000fe: [N/A] Other at Ext N/A

Conn = Unknown, Color = Unknown

Pin-ctls: 0x00:

Connection: 1

0x18

Node 0x14 [Pin Complex] wcaps 0x400001: Stereo

Pincap 0x0820: IN

Pin Default 0x90a7002e: [Fixed] Mic at Int N/A

Conn = Analog, Color = Unknown

Pin-ctls: 0x20: IN

Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out

Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=1

Amp-Out vals: [0x00 0x00]

Connection: 4

0x0a 0x0d 0x14* 0x02

Node 0x16 [beep Generator Widget] wcaps 0x70000c: Mono Amp-Out

Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0

Amp-Out vals: [0x00]

Node 0x17 [Volume Knob Widget] wcaps 0x600000: Mono

Node 0x18 [Audio Output] wcaps 0x40201: Stereo Digital

tazmania
tazmania
Posted
Posted

hey hope someone will me pls

i got intel d975xbx2 with stac9247d i got it to work but i got glitch when i play music

can someone tell what driver i should use and from where i can download it

btw i just want digital to work perfect

thanks in advence

frantisheq
frantisheq
Posted
Posted
My Dell DXP061 has an integrated sound card, it says STAC9227 on the chip. So I tried to use the AppleHDA Patcher version 1.7 with the linux codec dump I got from Knoppix. But it does not work. The patcher seems working fine and updated ALCinject and AppleHDA, once I rebooted the machine, it still says no sound card.

 

Taruga, can you help on this. The attached is the linux codec dump. Comparing it with the one from the post #1, only significant difference I can see is the subsystemId.

 

Any help will be appreciated.

 

 

download stac9227_83847618.zip from taruga. replace your kexts and maybe you'll need to change microphone Boost to 3 in AppleHDA.kext's Info.plist to get mic working. Also delete AppleAzalia.kext if you have one

macgirl
macgirl
Posted
Posted
I have an Inspiron 1420 with sigmatel 9228 and i dumped my codec from a gutsy install thats audio was working and when i use this patcher it only will play audio if i plug headphones into the first port. It has 2 speakers, 2 headphone outputs, one internal mic input and one mic input i attached the codec dump.

It's a know problem in Linux too, but newer distros and patches in ALSA driver get proper routing, even on the Vista "default" driver.

 

I find this today, maybe it could give us some clue:

http://osdir.com/ml/linux.ubuntu.devel.ker...6/msg00017.html

 

Maybe more patching to the AppleHDA.

 

searching with "macbook" and "stac922x" give a lot of stuff...

Darnott
Darnott
Posted
Posted

I got SigmaTel CXD 9872 Sony Vaio FE21M sound working.

I copied the file AppleHDA.kext from an JAS 10.4.8 install into a Leopard ToH install.

Then ran AppleHDAPatcher_v1.5 With a "codec#0" I got from a Ubuntu LiveCD boot up.

The speakers and the internal mic both work.

 

In System Profiler it shows

 

Intel High Definition Audio:

 

Device ID: 0x104D81EF

Audio ID: 12

Available Devices

serjek
serjek
Posted
Posted
Hi,

 

Someone managed to get an AD (Soundmax) 888-A as in P5B Standard fully working ? (more than 2-chan)

 

thx

 

 

I agree. I found several question on P5B's AD 1988A card, but no replies. The only dump I found did not help (I'm using Tiger 10.4.9 uphuck's edition 1.3i) so I had to reinstall AzaliaAudio kext in order to get at least stereo out back working. Surfing forum 24/7 during last two weeks didn't ring any result better than that "only green out working". And I really really really need mike. Well, I can use USB mike but I hadn't found one yet. So working "pink" woud be greatly appreciated!

sundevils
sundevils
Posted
Posted
hi sundevils, how can i extract linux codec dump?

thx

 

What you need is a Knoppix live CD (www.knoppix.org), just boot it from your CD ROM drive and then do:

 

cat /proc/asound/card0/codec#0 > [codec dump filename].txt

 

The number maybe different depends on your machine.

 

Hope this helps.

 

Sundevil

sundevils
sundevils
Posted
Posted
download stac9227_83847618.zip from taruga. replace your kexts and maybe you'll need to change microphone Boost to 3 in AppleHDA.kext's Info.plist to get mic working. Also delete AppleAzalia.kext if you have one

 

Man, it works. I did try stac9227_83847618.zip last week, somehow it did not work. This time when I did it again, it worked. Thank you so much.

 

So the pather 1.7 does not work for me.

 

-Sundevil

Nekoi
Nekoi
Posted
Posted

Woah! suddenly disappear the downloable files. :blink:

 

but Before that happen im download the appleHDA and works with my PC running 10.5 Leopard and now i have Out and Line In, and mic, that's pretty cool. :D

 

Im Install in my D915GAG with ALC860

 

Im only replace the Kexts and set the permissions and now work very good.

jjduro
jjduro
Posted
Posted
WHAT HAPPEN WITH THE FILES.....the first post is empty....____?????????
No it is not. I think there's a period on top... Like a "final period"... The end.Maybe Taruga is taking a break or he could be very fed up with all the PMs and calls for help.Future only knowsNo it is not empty.I think there's a period on top... Like a "final period"... The end.Maybe Taruga is taking a break or he could be very fed up with all the PMs and calls for help.Future only knows
tivimac
tivimac
Posted
Posted

Ok. I respect the work that Taruga has been doing for a year, but the files in the first post are/were helping many people (including myself), so he can make an statement that he cannot longer support the development but leave the file for other to use it. I did a search in google for alternate sources of this patcher return empty, all links point to this forum.

 

I have now a P5LD2-SE mobo, and want to try the v. 1.13 that the version that works with AD1986A codec, but now is almost impossible to do this.....IF somebody has this file, Please PM with it....Thanks.

 

No it is not. I think there's a period on top... Like a "final period"... The end.Maybe Taruga is taking a break or he could be very fed up with all the PMs and calls for help.Future only knowsNo it is not empty.I think there's a period on top... Like a "final period"... The end.Maybe Taruga is taking a break or he could be very fed up with all the PMs and calls for help.Future only knows
Guest
This topic is now closed to further replies.
 Share
Go to topic listing
×
×
  • Create New...