sygey Posted January 27, 2019 Share Posted January 27, 2019 hi @MaLd0n, How to enable Intel UHD Graphics 630 on mojave 10.4.2 ? my spec i7 8700K -(UHD 630) Z390 AORUS ULTRA (bios f3) System definition= imac 18.3 I can,t find any solution to make it boot I make a bootable usb, it boots clover its loaded but when the instaler screen apears it go,s black i tink its somting wrong with Graphics 630 ? Can you provide a EFI for instalation for my specs? I alredy tryed your folder for 100/200/300, it boot,s until clover loads drivers, but the same it go black and no reching the instaler screen Also is there any wai that enable this Intel UHD Graphics 630 i7 8700K? Please help me! Here its my EFI from USB! CLOVER.zip Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/191/#findComment-2661552 Share on other sites More sharing options...
MaLd0n Posted January 27, 2019 Author Share Posted January 27, 2019 2 hours ago, sygey said: hi @MaLd0n, How to enable Intel UHD Graphics 630 on mojave 10.4.2 ? my spec i7 8700K -(UHD 630) Z390 AORUS ULTRA (bios f3) System definition= imac 18.3 I can,t find any solution to make it boot I make a bootable usb, it boots clover its loaded but when the instaler screen apears it go,s black i tink its somting wrong with Graphics 630 ? Can you provide a EFI for instalation for my specs? I alredy tryed your folder for 100/200/300, it boot,s until clover loads drivers, but the same it go black and no reching the instaler screen Also is there any wai that enable this Intel UHD Graphics 630 i7 8700K? Please help me! Here its my EFI from USB! CLOVER.zip https://www.insanelymac.com/forum/topic/335018-hackintool-v179/ 2 Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/191/#findComment-2661603 Share on other sites More sharing options...
luckyal Posted January 30, 2019 Share Posted January 30, 2019 On 1/23/2019 at 7:09 AM, ariqk88 said: Thanks man ! by the way can you tell me how to edit this? and where i can find to edit this? Man, how are people getting all of their PCI device list populated? I don't have a single one. Maybe that's why I haven't been able to install and run my Slate VRS8 Thunderbolt audio interface. Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/191/#findComment-2662021 Share on other sites More sharing options...
MaLd0n Posted January 31, 2019 Author Share Posted January 31, 2019 On 1/29/2019 at 10:23 PM, nmano said: Hi @MaLd0n Gigabyte X299 WU8 I need DSDT help #When I run DarwinDumper panic system if getting cpu information. Thanks Mald0n. Send me Navaratnams-Mac-Pro-2.zip DSDT.aml.zip the panic is about Oiker kext for load infos 1 Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/191/#findComment-2662111 Share on other sites More sharing options...
nmano Posted January 31, 2019 Share Posted January 31, 2019 (edited) 5 hours ago, MaLd0n said: DSDT.aml.zip the panic is about Oiker kext for load infos What is Oiker kext Can you explain and How to fix ? I test patched DSDT work well.But Sleep not work Graphics patch missing I have SAPPHIRE Radeon RX Vega 64 Thanks Mald0n. Edited January 31, 2019 by nmano Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/191/#findComment-2662133 Share on other sites More sharing options...
ccoaston Posted January 31, 2019 Share Posted January 31, 2019 @MaLd0n Thanks for all your help i'm very grateful to have someone like you around. I'm slightly new to this and trying to get the hang of things. My PCI section is completely empty. I ran the runme app as well. About 80 percent of the hardware works well that I can see but I need all my devices populated. Where should I start? Asus hero XI mobo i7 9700k strix vega 64 Send me iMac.zip Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/191/#findComment-2662162 Share on other sites More sharing options...
ccoaston Posted January 31, 2019 Share Posted January 31, 2019 Here's also a list of my kext Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/191/#findComment-2662165 Share on other sites More sharing options...
MaLd0n Posted February 1, 2019 Author Share Posted February 1, 2019 11 hours ago, nmano said: What is Oiker kext Can you explain and How to fix ? I test patched DSDT work well.But Sleep not work Graphics patch missing I have SAPPHIRE Radeon RX Vega 64 Thanks Mald0n. post new send_me with new file 1 Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/191/#findComment-2662218 Share on other sites More sharing options...
MaLd0n Posted February 1, 2019 Author Share Posted February 1, 2019 8 hours ago, ccoaston said: @MaLd0n Thanks for all your help i'm very grateful to have someone like you around. I'm slightly new to this and trying to get the hang of things. My PCI section is completely empty. I ran the runme app as well. About 80 percent of the hardware works well that I can see but I need all my devices populated. Where should I start? Asus hero XI mobo i7 9700k strix vega 64 Send me iMac.zip CLOVER.zip USE ONLY IT WITH LAST CLOVER VERSION Clover_v2.4k_r4870.pkg.zip 1 Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/191/#findComment-2662219 Share on other sites More sharing options...
ccoaston Posted February 1, 2019 Share Posted February 1, 2019 (edited) Hey @MaLd0n you da real MVP!! My Man https://youtu.be/SGUflZS7jG0 Edited February 1, 2019 by ccoaston Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/191/#findComment-2662221 Share on other sites More sharing options...
nmano Posted February 1, 2019 Share Posted February 1, 2019 2 hours ago, MaLd0n said: post new send_me with new file I update new files. thank you. Send me Navaratnams-Mac-Pro-2.zip Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/191/#findComment-2662223 Share on other sites More sharing options...
MaLd0n Posted February 1, 2019 Author Share Posted February 1, 2019 14 hours ago, nmano said: I update new files. thank you. Send me Navaratnams-Mac-Pro-2.zip DSDT.aml.zip New send_me after reboot, i need check 1 Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/191/#findComment-2662304 Share on other sites More sharing options...
sygey Posted February 1, 2019 Share Posted February 1, 2019 Hi MaLd0n ! Can you help please with a DSDT patching for this system (Z390 Aorus Ultra and i7 8700K) ? I attach files below Tank you! Send me Cristians-iMac.zip Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/191/#findComment-2662315 Share on other sites More sharing options...
nmano Posted February 1, 2019 Share Posted February 1, 2019 2 hours ago, MaLd0n said: DSDT.aml.zip New send_me after reboot, i need check I update New-Files please check Thank you. Send me Navaratnams-Mac-Pro-2.zip Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/191/#findComment-2662327 Share on other sites More sharing options...
MaLd0n Posted February 1, 2019 Author Share Posted February 1, 2019 1 hour ago, sygey said: Hi MaLd0n ! Can you help please with a DSDT patching for this system (Z390 Aorus Ultra and i7 8700K) ? I attach files below Tank you! Send me Cristians-iMac.zip DSDT.aml.zip 5 minutes ago, nmano said: I update New-Files please check Thank you. Send me Navaratnams-Mac-Pro-2.zip looks good, for insane pci devices, need a many times for create all devices, create one by one and inject _DSM 2 Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/191/#findComment-2662328 Share on other sites More sharing options...
nmano Posted February 1, 2019 Share Posted February 1, 2019 (edited) 1 hour ago, MaLd0n said: DSDT.aml.zip looks good, for insane pci devices, need a many times for create all devices, create one by one and inject _DSM Thanks Mald0n Still Sleep not work.I don't know why? I like your style patched DSDT. Edited February 1, 2019 by nmano Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/191/#findComment-2662340 Share on other sites More sharing options...
sygey Posted February 2, 2019 Share Posted February 2, 2019 Hi MaLd0n ! Tank you for your help! the DSDT file working well, but sleep not working! I made a gekench test wit the system, but it looks like its pretty poor performance for 4,7 ghz and xmp1 3000? its becouse my graphics not working? Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/191/#findComment-2662447 Share on other sites More sharing options...
MaLd0n Posted February 2, 2019 Author Share Posted February 2, 2019 5 hours ago, sygey said: Hi MaLd0n ! Tank you for your help! the DSDT file working well, but sleep not working! I made a gekench test wit the system, but it looks like its pretty poor performance for 4,7 ghz and xmp1 3000? its becouse my graphics not working? what happens with sleep? some intelHD sleep don't work Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/191/#findComment-2662509 Share on other sites More sharing options...
JimInside Posted February 5, 2019 Share Posted February 5, 2019 (edited) hey @MaLd0n , you have helped me again so thanks for helping so many people ! you are great! im trying to boot mojave on my pc i7 7700k asrock z270 itx / ac no discrete GPU could you build a clover folder for me? I tried the one on your first post but i get the prohibited sign Thank you for everything Edited February 5, 2019 by JimInside Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/191/#findComment-2662800 Share on other sites More sharing options...
corbiz Posted February 5, 2019 Share Posted February 5, 2019 (edited) hii @MaLd0n, another prblom only work my usb 2.0 port doesn't detect usb3 devices like external hard disk, other Problam not shut down and restart, my spec i5 8400 -(uhd 630) h370 hd3-(gigabyte latest bios) 8gb 2400, rx 580 4gb, macOS Mojave 14.2 (18C54) system definition= imac 18.3 any solution? i used your post instalation clover. Edited February 5, 2019 by corbiz Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/191/#findComment-2662810 Share on other sites More sharing options...
MaLd0n Posted February 5, 2019 Author Share Posted February 5, 2019 4 hours ago, JimInside said: hey @MaLd0n , you have helped me again so thanks for helping so many people ! you are great! im trying to boot mojave on my pc i7 7700k asrock z270 itx / ac no discrete GPU could you build a clover folder for me? I tried the one on your first post but i get the prohibited sign Thank you for everything use usb 2 port 1 hour ago, corbiz said: hii @MaLd0n, another prblom only work my usb 2.0 port doesn't detect usb3 devices like external hard disk, other Problam not shut down and restart, my spec i5 8400 -(uhd 630) h370 hd3-(gigabyte latest bios) 8gb 2400, rx 580 4gb, macOS Mojave 14.2 (18C54) system definition= imac 18.3 any solution? i used your post instalation clover. --USB Fixhttps://olarila.com/forum/viewtopic.php?p=65287#p65287 Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/191/#findComment-2662818 Share on other sites More sharing options...
JimInside Posted February 5, 2019 Share Posted February 5, 2019 mald0n my motherboard has only USB 3 ports Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/191/#findComment-2662819 Share on other sites More sharing options...
corbiz Posted February 5, 2019 Share Posted February 5, 2019 hi @MaLd0n another problam shutdown/restart not worke attache my screenshot my spec i5 8400 -(uhd 630) h370 hd3-(gigabyte latest bios) 8gb 2400, rx 580 4gb, macOS Mojave 14.2 (18C54) system definition= imac 18.3 any solution? i used your post instalation clover. Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/191/#findComment-2662820 Share on other sites More sharing options...
JimInside Posted February 5, 2019 Share Posted February 5, 2019 @maLd0n is there any other way of fixing this ? should i try USB2 stick? thank you Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/191/#findComment-2662827 Share on other sites More sharing options...
Rosarioxx Posted February 6, 2019 Share Posted February 6, 2019 Hi MaLd0n you can help me to improve my hack, I have problems with the audio after the stop, I have to restart to make it work. Send me iMac.zip Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/191/#findComment-2662934 Share on other sites More sharing options...
Recommended Posts