Recently Browsing 0 members
No registered users viewing this page.
Hi guys, this thread is to show you a new and open source app, created by me, that I called TINU:
The name means: TINU Is Not #####, the U refers to a popular software that is used to create macOS hackintosh installers (that for good reasons is banned on this forum), but the aim of the name is to explain that this app is a totally different thing from that software and works in a totally different way.
This app basically is a graphical interface for the createinstallmedia executable that is inside the macOS and Mac OS X installer apps, it is capable to create a bootable installer completely vanilla like what you do using the command line method, and also this method is recommended by apple itself. In addition to this, this app provvides you simplicity and flexybility, and lets you to avoid most of the tedious steps or problems of other simlar apps.
TINU allows you to create easily a bootable macOS installer without messing around with command line stuff and without using disk utility, all you need to do is use the app and then install your bootloader of choiche on the usb (or just leave it as is if you want to use it on a real Mac).
- Simple-to-use UI that allows you to easily start the bootable macOS installer creation process.
- It can work with every macOS installer app that has the createinstallmedia executable inside its resources folder (including also beta and newly released installers).
- You can use any erasable volume that is at least 7 GB of size (if the volume's drive is not in GUID format, TINU will re-format it accordingly).
- Can work with the Mac OS recovery system, so you can create a bootable macOS installer from the macOS installer itself or from the macOS recovery partition, and you can use TINU to install macOS, too.
- 100% clean: The bootable macOS installers created with this tool are vanilla, just as if you created them using the command line "createinstallmedia" method in Terminal.
- Open Source: You can verify what this program does on your computer and you can create your own version by downloading and playing with the source code.
- Does not require any special preparations. Just open the program, make sure you have a USB drive plugged in and have a macOS installer app on your disk.
- No need to use Disk Utility. TINU can format your drive or partition for you.
- Integrated EFI partition mounter tool.
- Works using the latest versions of macOS and will also support newer Mac installers out of the box without requiring an update.
- Offers advanced features to customize your bootable macOS installer.
(To sugegst a new feature please contact me on github)
- A computer that runs Mac OS X Yosemite or a more recent version (Mac OS X El Capitan is required to use TINU in a macOS recovery or installer).
- A drive or a free partition (on a drive which already supports GUID) of least 7 GB that you want to turn into a macOS/Mac OS X installer.
- A copy of a macOS/Mac OS X installer app (Maveriks or newer versions are supported) in the /Applications folder or in the root of any storage drive on your machine (excepted the drive or volume you want to turn into your macOS install media).
- All downloads:
- Reccommended download for Catalina and Big Sur users:
Frequently asked questions:
Thread (english) on insanelymac.com:
Thread (italian) on insanelymac.com:
Thread (english-german) on hackintosh-forum.de:
Post on Reddit:
Facebook hackintosh help and beta testing (Italian only):
Contact me (project creator):
- Insanelymac.com profile: http://www.insanelymac.com/forum/user/1390153-itztravelintime/
- email: email@example.com
- This software is under GNU GPL v3 license so any new branch/mod/third party release must be open source and under the same license.
- We (the project creator and othe people involved with active developmment) assume no responsibility for any use of this app and this source code, and also for any kind of hardware and software damage to any computer and any device or peripheral that may come from this app or source code during it's use and outside it's usage
- We do not guarantee support to you, this is only an open source project, not a product released by a company!
- This project is born only for educational and demonstrative purposes, it's not intended to be used for commercial purposes and it will never be.
- This is a no-profit project, born only to let people to create macOS install medias in a more simple way and also to learn how to create this kind of apps.
- Apple for macos and installer apps and scripts
- People that helped me a lot:
Francesco Perchiazzi, Nicola Tomarelli, Roberto Sciortino, Raffaele Sonnessa, Ermanno Nicoletti, Tommaso Dimatore, Michele Vitiello Bonaventura, Massimiliano Faralli, Davide Dessì, Giorgio Dall'Aglio, Peter Paul Chato.
- Special thanks to Italian Hackintosh group!! for help (https://www.facebook.com/groups/Italia.hackintosh/?fref=ts)
- Thomas Tempelmann for help with the UI
- Pietro Caruso (ITzTravelInTime) for creating, maintaing and developing this project
Here are also some screenshots inside this spoiler tab
I'm running macOS Catalina 10.15.7 in a VM which is running in VMWare Workstation 16.0 on Windows 10 Pro (build 2004)
VMware says that the installed version of VMware Tools is not up to date. However, in my opinion it is.
The hardware compatability is set to Workstation 16.x. Changing it to version 15.x does not help.
When I run the /Library/Application\ Support/VMware\ Tools/vmware-tools-cli -v command in Terminal (macOS) to check the installed version
of VMWare Tools it produces the follwing result. See screenshot attachment.
Thereafter, If I run an update of the VMware Tools via the Update option in the VM menu option of Workstation 16 and restarts macOS, then Vmware Workstation keeps saying: 'Vmware Tools is not up to date'
Someone have a solution to this problem?
I just recently purchased the HP Omen 17-AN012DX laptop, because I saw some links (provided below),That had shown great success with not only installing high Sierra but also (as of late), Catalina installed in this very laptop. Here are the specs
HP Omen 17-AN012DX
1TB Samsung EVO 850 SSD
AMD Radeon RX580 GPU
Now the thing is, it hasn't been easy to get through to anybody on these forms and that's the reason why I'm posting this here. To see if anybody could possibly help out. Now mind you, I was on Tony Mack (with the link that I just included above), and was going back and forth with requesting help. Well it didn't take long and I definitely got some good response. In fact there was a person on their by the name of "sdascalescu"Who had not only talk to me about the success he had with installing Catalina but also told me that it was not going to be possible to install 10.15.7 but rather 10.15.3 due to the AMD RX 580 primary output which is set by default to HDMI which basically makes the laptop monitor unusable, but will allow you to use an external monitor.
As we went back and forth on this, I guess the moderators felt not too comfortable with him supplying his EFI file (which I'm glad I downloaded immediately), but the way he compress a file he used an RAR compression program instead of a zip compression program. And as some of us already know sometimes when you reopen an RAR file, that the DSDT files can get jacked up a bit at times. In any case, I used his EFI file and try to install 10.15.7 to no avail. In the meantime I was trying hard and spent quite a few hours trying to find the full install two 10.15.3 and could not find it somehow except on a torrent website. Of course it's an older file so it's not easy to download because there's not a lot peers on their supplying this file anymore. Once I mentioned this on Tony my they quickly banned me and also pretty much got rid of all the commentary that we had that created a page and 1/2 of useful dialogue and I even think that that other person got banned as well for supplying that EFI file.
It's pretty frustrating at times to work with people that show no compassion or understanding, especially when you're dealing with a hacked OS system. As some of you know, I’ve been doing this now for over 10 years and have built some of the best Hackintosh systems and have been very grateful to contribute towards being one of the moderators here on insanely Mac hosting “Mac Mod of the Month.” That was a ton of fun! seeing all the incredible creative ideas and builds has been nothing short of amazing!
In any case, I would like to be able to supply this EFI file (in a zip format) and if anybody has the same exact model laptop (or any HP Omen Laptop) with the specs that I have and has had the same kind of installation success as the other people have, please let me know what it is that I need to do to make this work because I am having a tough time installing the software because it keeps on getting locked up so I am not able to install this as of yet. Below is good to be a screenshot of where the installation process stops. I hope that someone will be able to see this and give some input on what to do next. Thank you for taking the time to look at this and I look forward to any help anybody can give, again thank you!
I have supplied a Google Drive link for you to download the EFI Zip file: https://drive.google.com/file/d/1QkS9byhA8O0lf9cl1VknVPorEeOWvIWC/view?usp=sharing
Here is the EFI Zip File:
macOS Catalina on: Gigabyte Z390 Aorus Elite motherboard + i3 9100 Coffee Lake processor + AMD Radeon RX 580 graphics card + fenvi FV-T919 WIFI and Bluetooth card + Clover r5121 + AppleALC, Lilu, VirtualSMC, XHCI-unsupported, IntelMausiEthernet, USBPorts and WhateverGreen.
Gigabyte Z390 Aorus Elite motherboard: support for Intel 8 and 9 generation processors, Realtek ALC1220 audio, Intel I219V Ethernet, 4 PCI-E slots, 2, 3 and 3.1 USB ports, Intel Graphics 630 integrated graphics card 9th generation Intel i3 9100 processor Nox Hummer H-212 120mm CPU Fan Corsair Vengeance LPX 3200 MHz 16 GB RAM (2 x 8) AMD Radeon RX 580 8GB graphics card Wifi and Bluetooth Card Fenvi FV-T919 Mars Gaming MPII850 Power Supply (850W) Samsung EVO 860 SSD disk.
What works well?
Pretty much everything I've tried:
Radeon RX 580: 3 DP ports and 1 HDMI port, output to 2 displays simultaneously Shutdown, reboot and sleep Integrated sound and HDMI sound output USB ports (2, 3 and 3.1) Enable TRIM for SSD drive AirDrop, Sidecar, etc.
What is not working well?
Integrated Intel UHD Graphics 630 card: see below.
BIOS settings (version F9)
I only write down the significant options, there are many other options that do not influence macOS and that you can configure to your liking (for example the LEDs on the board, etc.).
XMP Profile: Auto / Profile 1 / Enabled (eXtreme Memory Profile, I use 3200 MHz memory and without this profile it works at 2600) Platform Power Management: Disabled VT-d: Disabled XHCI Hand-Off: Enabled Legacy USB Support: Enabled Network Stack: Disabled CSM: Disabled Secure Boot: Disabled Fast Boot: Disabled OS Type: Other OS Wake on LAN: Disabled Integrated Graphics: Auto Initial Display Output: PCIe 1 Slot DVMT Pre-Allocated: 256M or higher.
EFI folder for Clover (installation USB stick / SSD disk with Catalina)
Some SSDT.aml files in EFI/CLOVER/ACPI/patched.
SSDT-DTPG.aml (helper module for SSDT)
SSDT-EC.aml (USB power charge)
SSDT-UIAC.aml (USB port mapping)
SSDT-USBX.aml (USB port mapping)
SSDT-PMC.aml got from OpenCore to have native NVRAM on Z390 mother boards
SSDT-Z390-RP21-SLOT4-TB3HP.aml (Thunderbolt devices hot plug) it can be skipped.
Drivers in EFI/CLOVER/drivers/UEFI
* see OC Quirks below.
Extensions in EFI / CLOVER / kexts / Other
NOTE 1: The USBPorts.kext extension along with 3 aml files included in patched folder (SSDT-EC.aml, SSDT-UIAC.aml y SSDT-USBX.aml) were generated by joanserramiret with the configuration of USB ports for this motherboard so that the limit defined by macOS of 15 ports is not exceeded. Leaves the system configured in this way:
Enabled all USB2 ports that are not part of a USB3 port (1 internal for BT + 4 rear that are together + 2 on the front) Enabled the USB2 ports that are part of the 2 rear red USB3.1 ports Disabled the USB2 ports that are part of the 4 rear blue USB3 ports Enabled all USB3 ports except the internal one for USB type C connection. Summary: Rear blue ports do not recognize USB2 devices.
NOTE 2: XHCI-unsupported.kext is required for XHC chipsets whose Device ID is not included in macOS. Depending on the USB driver of your board, it may be necessary to install some additional extension:
8086: 8CB1 on macOS 10.11.1 or lower: XHCI-9-series.kext 8086: 8D31, 8086: A2AF, 8086: A36D, 8086: 9DED: XHCI-unsupported.kext 8086: 1E31, 8086: 8C31, 8086: 8CB1, 8086: 8D31, 8086: 9C31, 8086: 9CB1: FakePCIID.kext + FakePCIID_XHCIMux.kext. This board (generally Z390 chipset boards) carries the USB 3.1 controller with device ID A36D so the XHCI-unsupported kext is required. You can check your device ID at
/System/Library/Extensions/IOUSBHostFamily.kext/Contents/Plugins/AppleUSBXHCIPCI.kext/Contents/Info.plist Config.plist file
The differential options are:
Acpi> DSDT: change HECI to IMEI / change SAT0 to SATA
Acpi> Fixes: FixShutdown
Acpi> Drop OEM_DSM
Acpi> Drop Tables> DMAR / MATS
Acpi> SSDT> PluginType selected (Plugin Type number blank)
Acpi> Halt Enabler / FixHeaders
Boot> Boot Arguments> slide = 0 / darkwake = 8
Devices> USB> Inject / FixOwnership / HighCurrent
Devices> Audio> Inject 11
Kernel and Kext Patches> Apple RTC and KernelXCPM selected
Kernel and Kext Patches> KextsToPatch> Name: com.apple.driver.AppleAHCIPort / Find: 40600200 / Replace: 00000000 / Comment: SATA hot plug
Kernel and Kext Patches> KextsToPatch> Name: com.apple.driver.AppleAHCIPort / Find: 45787465 726E616C / Replace: 496E7465 726E616C / SATA orange icons
System Parameters> Inject Kexts: Yes / Inject System ID: selected.
Quirks > select AvoidRuntimeDefrag – DevirtualiseMmio – EnableSafeModeSlide – ForceExitBootServices – ProtectUefiServices – ProvideConsoleGopEnable – ProvideCustomSlide – SetupVirtualMap – SyncRuntimePermissions and set ProvideMaxSlide = 0. *
Set true DevirtualiseMmio and ProtectUefiServices in OcQuirks.plist file (recommended on Z390 mother boards).
* see OC Quirks below.
macOS Catalina install
There are many publications with instructions so I will only comment on a few specific details.
The installation USB memory must have a GUID partition scheme so that the board's UEFI can boot from it. I have prepared the USB with the createinstallmedia method + the application "Install macOS Catalina" in the Applications folder The device is USB 3 and, connected to the front USB 3 port, it performs the task quite quickly I have used Clover r5121 which is currently the latest version. The EFI folder of the installation USB can be the same as that of the hard disk with 2 differences: Acpi> SSDT> PluginType deselected and Acpi> Boot leave Default Boot Volume blank and Timeout -1 (so that no volume will boot automatically from the Clover menu). To mount the EFI partition (of the disk or the USB device) I have used Clover Configurator which makes this task very simple or the command line (diskutil), first finding out what disk and partition number is the EFI (diskutil list) and showing it later (mountdisk):
sudo diskutil list
sudo diskutil mountdisk / dev / disk2s3
Although my RX 580 card is a model from the XFX brand, known for using custom VBios and giving problems in macOS, in my case it seems to work well with Lilu and WhatEverGreen. Booting the operating system it does not show artifacts, the 3 DP ports and the only HDMI port work, you can send the image simultaneously to 2 screens (I have not tried more) with the usual duplication options, yo can send sound in addition to image to one TV by HDMI, during the installation of the operating system it works correctly provided that Lilu and WhatEverGreen are in the USB device, etc. GeekBench 5 Scores: Metal 50100 / OpenCL 44100. As a comparison, the integrated card does not reach 4800 in Metal.
Regarding the hardware decoding of H264 and HEVC videos, the Hackintool tool and the VideoProc application report that it is not supported although the playback of files of both types with rates of up to 20 mbps is correct so I suspect that it actually encodes well. In order for hardware decoding to appear as supported in the commented applications, the integrated Intel Graphics 630 card must be enabled even if it is disconnected in headless mode (using the RX 580 card as primary sending image to the screen).
This board incorporates the Realtek ALC1220 chip that needs the AppleALC extension to work. AppleALC is a Lilu plugin so both must be properly installed.
Note: Clover > Devices > Audio > Inject 11 or 13 or 15. I’ve tried several layouts and this are the only valid at least in my case.
Some users have commented that the system does not load AppleALC and they have no sound despite having the extensions in EFI / CLOVER / kexts / Other. In these cases it can be successful to install AppleALC and Lilu in / Library / Extensions and rebuild the extensions cache with Hackintool (a very convenient way to do it) or with this Terminal command:
sudo spctl --master-disable; sudo mount -uw /; killall Finder; sudo chown -v -R root: wheel / System / Library / Extensions; sudo touch / System / Library / Extensions; sudo chmod -v -R 755 / Library / Extensions; sudo chown -v -R root: wheel / Library / Extensions; sudo touch / Library / Extensions; sudo kextcache -i /
What this command does is disable Gatekeeper, mount the system disk in read / write mode, repair permissions on the extensions folders and rebuild the cache. But all of that is done by Hackintool with less work on our part.
This board carries the Intel I219V chip that works well with the IntelMausiEthernet extension.
Wifi & Bluetooth
I use a Fenvi FV T-919 mini PCI-E card that carries both wifi and bluetooth chips. This card works perfectly in macOS without needing anything other than placing it on the board because it is recognized as Airport Extreme and Bluetooth Apple. Has its own article on perez987.
Samsung EVO 860 SSD. It is a solid state disk with references to work well in Mac. In my case it works well, with a read speed of 430 and a write speed of 250. I have tried faster SSDs but they have given problems to install Catalina, instead with the EVO 860 everything has worked perfectly.
Integrated Intel Graphics 630 card: we can to make it work correctly by adding some properties in Clover's Devices tab. For it to work you have to:
- enable it on the board as primary graphics: Initial Display Output IGFX instead of PCIe 1 Slot (actually this is the final step after modifying config.plist)
- add in config.plist: Boot> Boot Arguments> igfxonln = 1
- apply a patch (video and audio) in config.plist: Devices> Properties. It is easier to do it from the config.plist file in text mode than from Clover Configurator. With the file open as text find the lines
<key>Audio</key> <dict> <key>ResetHDA</key> <false/> <key>Inject</key> <integer>11</integer> </dict>
Immediately above of them paste this text:
<key>Properties</key> <dict> <key>PciRoot(0x0)/Pci(0x1F,0x3)</key> <dict> <key>layout-id</key> <data>CwAAAA==</data> <key>model</key> <string>Cannon Lake HDMI</string> <key>hda-gfx</key> <string>onboard-2</string> <key>AAPL,slot-name</key> <string>Internal@0,31,3</string> <key>device_type</key> <string>Audio device</string> </dict> <key>PciRoot(0x0)/Pci(0x2,0x0)</key> <dict> <key>framebuffer-con0-busid</key> <data>AAAAAA==</data> <key>framebuffer-con0-type</key> <data>AAgAAA==</data> <key>framebuffer-con2-flags</key> <data>xwMAAA==</data> <key>model</key> <string>Intel UHD Graphics 630</string> <key>framebuffer-con1-busid</key> <data>AAAAAA==</data> <key>device-id</key> <data>kT4AAA==</data> <key>framebuffer-con2-type</key> <data>AAgAAA==</data> <key>framebuffer-con2-busid</key> <data>BAAAAA==</data> <key>device_type</key> <string>Display controller</string> <key>hda-gfx</key> <string>onboard-1</string> <key>framebuffer-patch-enable</key> <data>AQAAAA==</data> <key>framebuffer-con1-type</key> <data>AAgAAA==</data> <key>AAPL,slot-name</key> <string>Internal@0,2,0</string> <key>AAPL,ig-platform-id</key> <data>BwCbPg==</data> <key>framebuffer-con2-enable</key> <data>AQAAAA==</data> <key>framebuffer-con1-enable</key> <data>AQAAAA==</data> <key>framebuffer-con0-enable</key> <data>AQAAAA==</data> </dict> </dict> But the system crashes when comes out of sleep mode (the PC restarts after a few seconds of leaving sleep mode). This behavior occurs if the cable that comes out from the HDMI port on the motherboard (the only existing connector on this Mobo) plugs in a DisplayPort port on the monitor; if it plugs directly into another HDMI port (monitor or TV) the bug does not occurs and the PC goes in and out of sleep normally.
Currently the only way to have the graphics card connected to a port other than HDMI without this crash is by replacing the "hda-gfx" property with "no-hda-gfx" in the above code of config.plist. The 2 lines
<key>hda-gfx</key> <string>onboard-2</string> must be replaced by
<key>No-hda-gfx</key> <data>AAAAAAAAAAA=</data> After adding this property, you will no longer have sound over HDMI / DP but sleep works very well.
- Intel HDMI to DisplayPort monitor> has HDMI audio output but has kernel panic when coming from sleep
- Intel HDMI to HDMI TV> has HDMI audio output and sleep works fine
- Intel HDMI to DisplayPort monitor with "no-hda-gfx"> sleep works fine but HDMI audio output is lost.
(based on the post "[GUIDE] General Framebuffer Patching Guide (HDMI Black Screen Problem)" by CaseySJ; thanks also to deeveedee for his help).
This card can be left activated without connection to the monitor (headless mode) and apparently does not show any interference with the rest of the system.
With the integrated card as the main card, the system shows enabled both graphics cards and allows to have a screen connected to the Intel 630 via HDMI and a different screen connected to the RX 580 via DP or HDMI, in this case the primary screen is that from the Intel and the other only works when the graphics driver is loaded but, once the system is up and running, the screens allow duplication options as if they depend on a single card.
Evolution to Oc Quirks
OC Quirks is an EFI driver for Clover that replaces AptioMemoryFix and all OsxAptioFix variants. It supports the OpenCore quirks model. AptioMemoryFix has evolved little in the most recent stage and is in a way becoming obsolete. Next versions of Clover will probably stop installing AptioMemoryFix and switch to OC Quirks which is evolving and receiving frequent improvements. You can read about this on the working group website: ReddestDream.
Migrating our installation from AptioMemoryFix to OC Quirks is relatively simple:
download the latest version of OC Quirks (search Releases, current version is 23) have a USB device that boots up properly to use in case of failure mount the disk's EFI partition delete AptioMemoryFix and any other OsxAptioFix variant add OcQuirks.efi, OpenRuntime.efi and OcQuirks.plist to Clover's drivers/UEFI folder change to true DevirtualiseMmio and ProtectUefiServices in the file OcQuirks.plist (recommended on boards with Z390 chipset) in Clover> Quirks config.plist file, check the boxes AvoidRuntimeDefrag - DevirtualiseMmio - EnableSafeModeSlide - ForceExitBootServices - ProtectUefiServices - ProvideConsoleGopEnable - ProvideCustomSlide - SetupVirtualMap - SyncRuntimePermissions and assign the value 0 to ProvideMaxSlide Restart the PC.
Kernel Panic with BIOS F10c if integrated graphics is enabled
The Z390 Aorus Elite board comes with BIOS F9 with which the text of this post has been written.
A few days ago I updated to the current version which is F10c and, since then, I have suffered a kernel panic with the forbidden symbol when going from the Clover menu to the macOS boot screen if the integrated card was enabled in BIOS. This happened regardless of whether the Intel UHD Graphics 630 card was set to Clover (fully for monitor output or headless mode for encoding) or not.
Returning to BIOS F9 the system has returned to working as before and the kernel panic has disappeared. I can have the card enabled or disabled again in BIOS without problems.
Install MacOS Catalina / Big Sur on Mobos Serie 400 with Intel 10th Desktop Processors using OpenCore or Clover bootloaderBy MaLd0n
-OpenCore Vanilla TUTORIAL-
-USB Port Mapping TUTORIAL-
1 -Create a USB bootable
Create your usb installer, use this tool and download Catalina or Big Sur from Apple servers
Copy Catalina / Big Sur installer to Applications folder, open terminal and run
If you want check one step by step, check here
-Opencore Vanilla Tutorial
2- EFI folder USB installation
-EFI OpenCore Folder Desktop 10th Intel Processors
Paste this EFI folder in EFI partition in your USB STICK
-EFI Clover Folder Desktop 10th Intel Processors
Paste this EFI folder in EFI partition in your USB STICK
3- EFI folder SSD
-EFI OpenCore Folder Desktop 10th Intel Processors
Paste this EFI folder in EFI partition SSD
-EFI Clover Folder Desktop 10th Intel Processors
Paste this EFI folder in EFI partition SSD
4- Start Fine Tune
Run this app and post full dump here for full ACPI solution
If you like a SSDT way, here we go
5- USB Solution
Use these kexts, enable XHCI port limit patch
USB INTEL SERIE 400.zip
and follow this tutorial for remap USB ports
-FIX ERRORS AND WARNINGS -FIX ACPI ERRORS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE ID -DMAC -REMOVE LINES, PROBLEMATIC and UNUSED -FIX K.P in REBOOT -NVRAM -REAL TIME CLOCK -SLPB -DARWIN / WINDOWS -XHCI -PLUGIN TYPE -HDEF -ARTC -IPIC -TIMR -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -UAR1 -LAN -FWHD -USBX -PMCR -PPMC -XSPI -kUSBCompanionIndex -io-device-location -IMEI -EC -PNLF -ARPT -GFX0 -NVME -ACPI-WAKE-GPE -DTGP -HDMI / HDAU
-If you want to buy me a beer - Donations with PayPal
Big Thanks to XLR and your Badass Motherboard, Ultrafast CPU, Coolest Heatsink, Huge Graphics Card, Tonnes of RAM,
Gigantic Hard Drive, Lightspeed Disk Burner, Professional Sound Card, Massive LCD Display.
-Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!
We're all here to have fun and learn from each other!