buttcrap Posted July 27, 2015 Share Posted July 27, 2015 Hey guys, so I am having a terrible time trying to get VGA up and running on this machine. You can see my specs in my signature, but it's an HP Laptop on 10.10 with Intel HD 3000 graphics. So I've followed a couple guides... https://insanelydeepak.wordpress.com/2015/03/10/guide-vga-hdmi-intel-hd3000-gpu/ http://forum.osxlatitude.com/index.php?/topic/1969-guide-for-enabling-vga-and-hdmi-in-intel-hd3000-gpu/ http://www.osxlatitude.com/how-to-enable-vga-and-hdmi-on-intel-hd-3000/ They're all the same. but no matter what I do I can't seem to enable VGA output on this machine. I've got full QE/hardware acceleration, 1080p screen, HDMI working great, but I really need VGA on this thing. I'm not sure I'm doing all of the steps correctly - for instance, in the above guides it will list the VGA code and then have 'xx' where it says the 'port number for VGA' should go. What would I put there..?I've tried quite a few things, and I'll end up messing with it so much that it either boots in like 600x800 with no QE, or it doesn't show video at all. I've uploaded both my DSDT as well as my AppleIntelSNBGraphics.kext in a zip file, if possible could someone look over these to see what my deal is? I've been stuck on this one for a while now, feel like I've hit a wall here.. Archive.zip Link to comment https://www.insanelymac.com/forum/topic/307327-intel-hd-3000-vga-hell/ Share on other sites More sharing options...
Allan Posted July 27, 2015 Share Posted July 27, 2015 Try this: Archive.zip Link to comment https://www.insanelymac.com/forum/topic/307327-intel-hd-3000-vga-hell/#findComment-2155920 Share on other sites More sharing options...
buttcrap Posted July 28, 2015 Author Share Posted July 28, 2015 Hey Allan, thanks for the suggestion. I installed the kext using Kext Wizard after deleting the previous one from System/Library/Extensions and I put that DSDT in EFI/CLOVER/ACPI/Patched as well. This one's not working either... looking at the files you sent I can see the connector that's there and I think that it SHOULD be working. I really am not sure what's going on here, this one has got me stumped. Any further ideas? Link to comment https://www.insanelymac.com/forum/topic/307327-intel-hd-3000-vga-hell/#findComment-2155990 Share on other sites More sharing options...
Allan Posted July 28, 2015 Share Posted July 28, 2015 We need try more values.... Link to comment https://www.insanelymac.com/forum/topic/307327-intel-hd-3000-vga-hell/#findComment-2155991 Share on other sites More sharing options...
buttcrap Posted July 29, 2015 Author Share Posted July 29, 2015 I thought that 0602 was always VGA on HD 3000? Maybe the port number could be wrong? Thanks for the guidance man, I'm just not sure where to proceed here... Edit: this link to OSX Latitude http://forum.osxlatitude.com/index.php?/topic/1969-guide-for-enabling-vga-and-hdmi-in-intel-hd3000-gpu/states that Intel Registry Dump in Linux could produce the VGA port number. Doing some Googling, I don't find any evidence that a program like this exists! This is the only guide of the over ten guides on this exact process I've found that states anything at all about how to actually find that port number, even though they all reference it. Link to comment https://www.insanelymac.com/forum/topic/307327-intel-hd-3000-vga-hell/#findComment-2156239 Share on other sites More sharing options...
Allan Posted July 29, 2015 Share Posted July 29, 2015 Try this Script: http://forum.osxlatitude.com/index.php?/topic/1969-guide-for-enabling-vga-and-hdmi-in-intel-hd3000-gpu/?p=37944 Make sure that you have use the right SMBios. About "Intel Registry dump", would be good if you ask @EMlyDinEsH about that... Link to comment https://www.insanelymac.com/forum/topic/307327-intel-hd-3000-vga-hell/#findComment-2156290 Share on other sites More sharing options...
Biso007 Posted August 23, 2015 Share Posted August 23, 2015 I have HP Elitbook with VGA working on 10.10.x I don't think the patched kext is enough in itself. I found that I must have a modified DSDT (GFX0 section) and SMBOIS for MBP 8,1 to activate the VGA port for HD3000. Good luck 1 Link to comment https://www.insanelymac.com/forum/topic/307327-intel-hd-3000-vga-hell/#findComment-2162764 Share on other sites More sharing options...
anonymousnbs Posted August 23, 2015 Share Posted August 23, 2015 Hey guys, so I am having a terrible time trying to get VGA up and running on this machine. You can see my specs in my signature, but it's an HP Laptop on 10.10 with Intel HD 3000 graphics. So I've followed a couple guides... https://insanelydeepak.wordpress.com/2015/03/10/guide-vga-hdmi-intel-hd3000-gpu/ http://forum.osxlatitude.com/index.php?/topic/1969-guide-for-enabling-vga-and-hdmi-in-intel-hd3000-gpu/ http://www.osxlatitude.com/how-to-enable-vga-and-hdmi-on-intel-hd-3000/ They're all the same. but no matter what I do I can't seem to enable VGA output on this machine. I've got full QE/hardware acceleration, 1080p screen, HDMI working great, but I really need VGA on this thing. I'm not sure I'm doing all of the steps correctly - for instance, in the above guides it will list the VGA code and then have 'xx' where it says the 'port number for VGA' should go. What would I put there..? I've tried quite a few things, and I'll end up messing with it so much that it either boots in like 600x800 with no QE, or it doesn't show video at all. I've uploaded both my DSDT as well as my AppleIntelSNBGraphics.kext in a zip file, if possible could someone look over these to see what my deal is? I've been stuck on this one for a while now, feel like I've hit a wall here.. some models use Intel HD 3000 when installing hackintosh will support VGA. and HDMI is not supported although some lines will support HDMI and VGA .. Way to VGA operation are: + HD3000 still has the ability to Utilize VGA port with some minor annoyances, namely - full hotplug support. You have to connect the monitor is before you start OSX and khi you unplug the printer monitor running system, OSX will still think it's connected off until you reboot. + HDMI + VGA Patch: Name: AppleIntelSNBGraphicsFB Find:010204001007000010070000050300000200000030000000020500000004000007000000030400000004000009000000040600000004000009000000 Replace: 010203001007000010070000050300000200000030000000060200000200000030000000020500000008000007000000000000000000000000000000 comment: HDMI + VGA That was lucky. My laptop supports native hdmi and vga patched 1 Link to comment https://www.insanelymac.com/forum/topic/307327-intel-hd-3000-vga-hell/#findComment-2162776 Share on other sites More sharing options...
Allrounder Posted November 15, 2015 Share Posted November 15, 2015 Hey can somebody help me to activate VGA on my Lenovo Z570 i7 with the Intel HD3000? I have some patches and edits in the Clover config.plist but I'm only copy them from other sites. Im not sure if these are corrects ore helpful, some are disabled. When I plug in a external VGA monitor I get a screen, but the screen has many graphical bugs. I already have a patch in Mavericks, but I forget to copy this before installing El Capitan. Edit: Is it possible to patch the AppleIntelSNBGraphicsFB with Clover? Lenovo Z570.zip Link to comment https://www.insanelymac.com/forum/topic/307327-intel-hd-3000-vga-hell/#findComment-2188493 Share on other sites More sharing options...
buttcrap Posted November 16, 2015 Author Share Posted November 16, 2015 Just curious, why would you want to patch it with Clover when you can just patch it with Hex Fiend etc Link to comment https://www.insanelymac.com/forum/topic/307327-intel-hd-3000-vga-hell/#findComment-2188809 Share on other sites More sharing options...
Allrounder Posted November 16, 2015 Share Posted November 16, 2015 Because Clover patch it on the air. So I must not change the AppleIntelSNBGraphicsFB after every update. This is only a question if this is possible. Can you be so kind and patch my Franebuffer, please? Link to comment https://www.insanelymac.com/forum/topic/307327-intel-hd-3000-vga-hell/#findComment-2188812 Share on other sites More sharing options...
buttcrap Posted November 17, 2015 Author Share Posted November 17, 2015 I can only suggest trial and error my man, but someone else in this thread may be able to help out Link to comment https://www.insanelymac.com/forum/topic/307327-intel-hd-3000-vga-hell/#findComment-2189327 Share on other sites More sharing options...
Recommended Posts