IronManJFF Posted July 22, 2018 Share Posted July 22, 2018 (edited) 6 hours ago, telecastaway said: Anybody have experience with the Thunderbolt ports on this motherboard? I have had two of these boards for years now and whenever i connect a Thunderbolt device it is not recognized until I reboot the machine. Normal behaviour for any hackintosh as far as I know Edited July 22, 2018 by IronManJFF Link to comment https://www.insanelymac.com/forum/topic/285920-os-x-compatible-motherboard-quo/page/149/#findComment-2626892 Share on other sites More sharing options...
IronManJFF Posted July 22, 2018 Share Posted July 22, 2018 On 7/19/2018 at 2:39 AM, jkim74 said: Running High Sierra with no issues on Quo MB. (Thanks everyone!) About to get RX 560 video card to use with FCPX. I know there have been some posts about this, but with High Sierra, does this video card work out of box our will I have to patch kext? Thanks Don't think it works OOTB ... it is notably absent from https://support.apple.com/en-us/HT208544 Link to comment https://www.insanelymac.com/forum/topic/285920-os-x-compatible-motherboard-quo/page/149/#findComment-2626893 Share on other sites More sharing options...
elviejo Posted August 3, 2018 Share Posted August 3, 2018 On 6/28/2018 at 6:57 PM, IronManJFF said: ROM image compatible with MacOS Mojave (works with previous OS too ) Infinite thanks @Cecekpawon and @TypeThree for providing a solution for Kext injection I merely assembled it for our beloved motherboard Z77MXQUOAOS.H20.167X-XMAX.ROM I only get the apple logo with it, not loading?. Link to comment https://www.insanelymac.com/forum/topic/285920-os-x-compatible-motherboard-quo/page/149/#findComment-2628642 Share on other sites More sharing options...
IronManJFF Posted August 3, 2018 Share Posted August 3, 2018 Check BIOS Version and BIOS Date in Defaults.plist ... still using MacMini6,2 ? Link to comment https://www.insanelymac.com/forum/topic/285920-os-x-compatible-motherboard-quo/page/149/#findComment-2628652 Share on other sites More sharing options...
elviejo Posted August 3, 2018 Share Posted August 3, 2018 Yea, and I made a new Defaults.plist with Ozmosis Configurator, I will try with iMac 13,2 to see what happen later today or tomorrow, will keep you posted. Link to comment https://www.insanelymac.com/forum/topic/285920-os-x-compatible-motherboard-quo/page/149/#findComment-2628665 Share on other sites More sharing options...
elviejo Posted August 4, 2018 Share Posted August 4, 2018 Try with iMac 13,2 plist, same result, Apple logo and that is, if verbose mode black screen ( not really black, is like the screen before booting ), I'm trying with the 5 developer beta, don't know if that's the problem. Link to comment https://www.insanelymac.com/forum/topic/285920-os-x-compatible-motherboard-quo/page/149/#findComment-2628756 Share on other sites More sharing options...
elviejo Posted August 5, 2018 Share Posted August 5, 2018 Same problem with developer beta 1. Attached is the ROM I'm using hoping one of the gurus take a look at it ( Hello cecekpawon ) and found what is wrong.Z77MXQUOAOS.H20.167X-XMAX.rom Link to comment https://www.insanelymac.com/forum/topic/285920-os-x-compatible-motherboard-quo/page/149/#findComment-2628826 Share on other sites More sharing options...
IronManJFF Posted August 5, 2018 Share Posted August 5, 2018 Just to be sure.. you can't install or you can't boot once installed ? Link to comment https://www.insanelymac.com/forum/topic/285920-os-x-compatible-motherboard-quo/page/149/#findComment-2628840 Share on other sites More sharing options...
elviejo Posted August 5, 2018 Share Posted August 5, 2018 (edited) I can't even boot the installer. Addjunt is the kernextpatcherlog.txt.KernextPatcherLog.txt Edited August 5, 2018 by elviejo Link to comment https://www.insanelymac.com/forum/topic/285920-os-x-compatible-motherboard-quo/page/149/#findComment-2628865 Share on other sites More sharing options...
Casm101 Posted August 5, 2018 Share Posted August 5, 2018 Have you tried using the Installer in a different USB port? Link to comment https://www.insanelymac.com/forum/topic/285920-os-x-compatible-motherboard-quo/page/149/#findComment-2628872 Share on other sites More sharing options...
elviejo Posted August 5, 2018 Share Posted August 5, 2018 Three different usb ports, same result. Link to comment https://www.insanelymac.com/forum/topic/285920-os-x-compatible-motherboard-quo/page/149/#findComment-2628888 Share on other sites More sharing options...
elviejo Posted August 6, 2018 Share Posted August 6, 2018 Finally success, using the ROM provided by IronManJFF and an actualized with Ozmosis Configurator config.plist mac mini 6,2 and the Beta Developer 6. Link to comment https://www.insanelymac.com/forum/topic/285920-os-x-compatible-motherboard-quo/page/149/#findComment-2629102 Share on other sites More sharing options...
IronManJFF Posted August 6, 2018 Share Posted August 6, 2018 I knew you'd get it Link to comment https://www.insanelymac.com/forum/topic/285920-os-x-compatible-motherboard-quo/page/149/#findComment-2629107 Share on other sites More sharing options...
elviejo Posted August 6, 2018 Share Posted August 6, 2018 Yea, thanks for your help and support. Link to comment https://www.insanelymac.com/forum/topic/285920-os-x-compatible-motherboard-quo/page/149/#findComment-2629111 Share on other sites More sharing options...
Casm101 Posted August 10, 2018 Share Posted August 10, 2018 Hey guys, Im having two different problems, I wonder if any of you have them too.... Firstly, there is an update for thunderbolt 1.2, that I can never install, no matter what version of MacOS I'm running. And secondly, the new Home app in Mojave, doesn't seem to work for me, I can open it, but it just sits there loading... forever... Thaaanks Link to comment https://www.insanelymac.com/forum/topic/285920-os-x-compatible-motherboard-quo/page/149/#findComment-2629555 Share on other sites More sharing options...
IronManJFF Posted August 10, 2018 Share Posted August 10, 2018 Thunderbolt update : You should hide or ignore it .... Apple's firmware update are meant for Genuine Apple hardware. I chose to hide in software update so it does not keep bothering me Home app in Mojave .. same result .. unsure if it is supposed to work... but maybe I should enable bluetooth and wifi and retry ... Link to comment https://www.insanelymac.com/forum/topic/285920-os-x-compatible-motherboard-quo/page/149/#findComment-2629562 Share on other sites More sharing options...
Casm101 Posted August 10, 2018 Share Posted August 10, 2018 11 minutes ago, IronManJFF said: Thunderbolt update : You should hide or ignore it .... Apple's firmware update are meant for Genuine Apple hardware. I chose to hide in software update so it does not keep bothering me Ok, I'll hide it, it does get kind of annoying after seeing it there after a while... 12 minutes ago, IronManJFF said: Home app in Mojave .. same result .. unsure if it is supposed to work... but maybe I should enable bluetooth and wifi and retry ... I hadn't thought of the wifi, I don't have a dongle, but I do have bluetooth. It might make a bit of sense if it is because of not having Wifi... I'll see if I can get a hold of one... Link to comment https://www.insanelymac.com/forum/topic/285920-os-x-compatible-motherboard-quo/page/149/#findComment-2629564 Share on other sites More sharing options...
IronManJFF Posted August 10, 2018 Share Posted August 10, 2018 I'll check when I get back home ... in about 8-9 hours from now Link to comment https://www.insanelymac.com/forum/topic/285920-os-x-compatible-motherboard-quo/page/149/#findComment-2629571 Share on other sites More sharing options...
Casm101 Posted August 10, 2018 Share Posted August 10, 2018 Also, how do I hide an update in Mojave, I imagine it’s through the command line... Link to comment https://www.insanelymac.com/forum/topic/285920-os-x-compatible-motherboard-quo/page/149/#findComment-2629587 Share on other sites More sharing options...
IronManJFF Posted August 10, 2018 Share Posted August 10, 2018 Do softwareupdate --listit will output a list of available software updates like :JavaForOSX-1.0to ignore this update you would do sudo softwareupdate --ignore JavaForOSXthus ignoring all JavaForOSX updates Link to comment https://www.insanelymac.com/forum/topic/285920-os-x-compatible-motherboard-quo/page/149/#findComment-2629589 Share on other sites More sharing options...
IronManJFF Posted August 10, 2018 Share Posted August 10, 2018 And secondly, the new Home app in Mojave, doesn't seem to work for me, I can open it, but it just sits there loading... forever... Or it could be related to Metal 2 for which ..well we need Nvidia to provide drivers Link to comment https://www.insanelymac.com/forum/topic/285920-os-x-compatible-motherboard-quo/page/149/#findComment-2629603 Share on other sites More sharing options...
IronManJFF Posted August 11, 2018 Share Posted August 11, 2018 13 hours ago, IronManJFF said: Home app in Mojave .. same result .. unsure if it is supposed to work... but maybe I should enable bluetooth and wifi and retry ... Well guess what it decided not to crash with the latest beta after restart (no BT or wifi).. wonders never cease ... but I have no HomeKit devices to test ... Link to comment https://www.insanelymac.com/forum/topic/285920-os-x-compatible-motherboard-quo/page/149/#findComment-2629656 Share on other sites More sharing options...
monkeyvoodoo Posted August 14, 2018 Share Posted August 14, 2018 Is there any way to add an NVMe BIOSto the Z77MXQUOAOS.H20.167X-XMAX ROM, so that NVMe SSDs would be bootable devices? Link to comment https://www.insanelymac.com/forum/topic/285920-os-x-compatible-motherboard-quo/page/149/#findComment-2630090 Share on other sites More sharing options...
IronManJFF Posted August 14, 2018 Share Posted August 14, 2018 (edited) I would think so ( I would have to recheck some stuff) ... If you have it as a EFI driver ... it would have to be loaded before Ozmosis and APFS. Mac OS 10.13 itself supports it. Edited August 14, 2018 by IronManJFF Link to comment https://www.insanelymac.com/forum/topic/285920-os-x-compatible-motherboard-quo/page/149/#findComment-2630121 Share on other sites More sharing options...
vco Posted August 20, 2018 Share Posted August 20, 2018 I would like to offer a huge thanks for all of the work from everyone involved in keeping these QUO boards alive. I have two of them, and just got one of them running 10.13.6 following the many instructions, and using the generously provided configuration files and newest BIOS ROM Z77MXQUOAOS.H20.167X-XMAX.ROM from this thread. It's currently running stock config, no additional GPU or other hardware - yet. I'd like to install a Powercolor RED Dragon RX-580 card that I have, but I'm not quite sure how to go about that with the QUO config. I'm assuming installing GPU's is different in these boards vs. a "traditional" hackintosh using the Chameleon or other bootloader injection methods.....or am I wrong? Apologies if I overlooked this information somewhere earlier in the thread. Any suggestions or information is appreciated. Thanks! vco Link to comment https://www.insanelymac.com/forum/topic/285920-os-x-compatible-motherboard-quo/page/149/#findComment-2631001 Share on other sites More sharing options...
Recommended Posts