LAbyOne Posted May 15, 2022 Share Posted May 15, 2022 (edited) 5 hours ago, Slice said: But I see no you resolved problems with gcc12. Are you sure the Clover will work when compiled by gcc12? Not yet tested at the time was still in the building phase testing at that moment. tried booting from it, a little time earlier today, and did not succeed. Probably better for the moment revert back the buildme to gcc11 until a solution is found. Edited May 15, 2022 by LAbyOne Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1133/#findComment-2782302 Share on other sites More sharing options...
MifJpnAlphaPlus Posted May 16, 2022 Share Posted May 16, 2022 21 hours ago, 5T33Z0 said: Tested this build: https://github.com/CloverHackyColor/CloverBootloader/actions/runs/2325004738 All I get is a single cursor on screen. Reverting back to r5146 Hello If we make it with gcc12, Clover certainly can't start. It also does not log. CLOVERX64.f12fd7c9c.gcc12.efihttps://stackoverflow.com/questions/72218980/gcc-v12-1-warning-about-serial-compilation As written in this, I think it's LinkTimeOptimization. But if I add --no-lto to the argument of ebuild.sh, I get an error in the code itself. I hope it can be fixed soon. For the time being ... git clone https://github.com/CloverHackyColor/CloverBootloader.git --recurse-submodules ./bulide_gcc11.sh ./bulidme select 7 CLOVERX64.f12fd7c9c.gcc11.efi So I built it with gcc11. (This Clover can start) Thank you. 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1133/#findComment-2782352 Share on other sites More sharing options...
Slice Posted May 16, 2022 Share Posted May 16, 2022 1 hour ago, MifJpnAlphaPlus said: Hello If we make it with gcc12, Clover certainly can't start. It also does not log. CLOVERX64.f12fd7c9c.gcc12.efi 1.47 MB · 0 downloads https://stackoverflow.com/questions/72218980/gcc-v12-1-warning-about-serial-compilation As written in this, I think it's LinkTimeOptimization. But if I add --no-lto to the argument of ebuild.sh, I get an error in the code itself. I hope it can be fixed soon. For the time being ... git clone https://github.com/CloverHackyColor/CloverBootloader.git --recurse-submodules ./bulide_gcc11.sh ./bulidme select 7 CLOVERX64.f12fd7c9c.gcc11.efi So I built it with gcc11. (This Clover can start) Thank you. As far as I see the stackoverflow has no answer what is the problem with gcc12. So I will propose it is gcc12.1.0 bug and will wait for 12.2.0. We will return back to gcc11. 1 2 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1133/#findComment-2782357 Share on other sites More sharing options...
jsl2000 Posted May 17, 2022 Share Posted May 17, 2022 (edited) On 3/1/2022 at 7:12 AM, chris1111 said: Your Wrong Clover is able to inject SMBIOS into legacy Bios and is able to Update or Installation of Big Sur and Monterey !!! It works, use the good EFI folder and you have to select the RC Script on target Volume Hide contents to have the NVRAM.plist in EFI after reboot Prouve here Update latest BETA 12.3 DONE!!! I already had beta 4 but reinstall over it with the Beta 2 installer to show you that it works and I updated Apple Beta 4 After update, I Reinstall Geforce Kepler Patcher for my GT 710 then Reboot Last login: Mon Feb 28 22:35:57 on console chris@iMac ~ % bdmesg 0:100 0:100 MemLog inited, TSC freq: 3292523240 0:100 0:000 CPU was calibrated with ACPI PM Timer 0:100 0:000 LegacyRegion2: Chipset/proc: 0x01008086 0:100 0:000 Next Generation Core processors (PAM 0x80-0x86) 0:100 0:000 Test PAM1=(0x41=90, 0x5a=00, 0x81=11, 0x91=00) at chipset 01008086 0:100 0:000 , Install = Success 0:109 0:009 BiosVideoDriverBindingStart! 0:109 0:000 BiosVideoCheckForVbe 0:109 0:000 EdidOverride not found 0:134 0:025 Edid1- 0:160 0:025 Edid0+ 0:160 0:000 found Detail Timing 1920x1080 0:219 0:058 0 640x480 attr=3BF - ok, edid+, 640x480, working, highest, pref=0 0:221 0:002 1 800x600 attr=3BF - ok, edid+, 800x600, working, highest, pref=1 0:223 0:002 2 1024x768 attr=3BF - ok, edid+, 1024x768, working, highest, pref=2 0:225 0:002 3 1280x1024 attr=3BF - ok, edid+, working, highest, pref=3 0:237 0:012 4 1920x1080 attr=3BF - ok, edid+, working, highest, pref=4 0:239 0:002 5 1280x800 attr=3BF - ok, edid+, working 0:239 0:000 BV new mode: 4 1920x1080 0:594 0:354 SetMode pref 4 (4) = Success 5:346 4:752 CloverX64 : Image base = 0xCCC3D000 5:346 0:000 Clover ImageHandle = ce40e698 5:348 0:001 === [ Starting Clover ] ========================= 5:348 0:000 Now is 01.03.2022, 03:35:21 (GMT) 5:348 0:000 Starting Clover revision: 5145 (master, commit d3d536c44) on CLOVER EFI 5:348 0:000 Build id: 20220226084234-d3d536c-dirty 5:348 0:000 Build with: [Args: -mc -D NO_GRUB_DRIVERS | --cmd-len=50000 -D NO_GRUB_DRIVERS --conf=/Users/chris/src/CloverBootloader/Conf -D USE_BIOS_BLOCKIO -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE8 -n 5 | OS: 12.2.1] 5:348 0:000 === [ Get Smbios ] ============================== 5:348 0:000 Type 16 Index = 0 5:348 0:000 Total Memory Slots Count = 4 5:348 0:000 Type 17 Index = 0 5:348 0:000 SmbiosTable.Type17->SlotIndex = 0 5:348 0:000 SmbiosTable.Type17->ModuleSize = 8192MB 5:348 0:000 SmbiosTable.Type17->Type = 0 5:348 0:000 SmbiosTable.Type17->Frequency = 1333MHz 5:348 0:000 SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0 5:348 0:000 SmbiosTable.Type17->Vendor = Kingston 5:348 0:000 SmbiosTable.Type17->SerialNo = 0F214F00 5:348 0:000 SmbiosTable.Type17->PartNo = KHX1600C10D3/8G 5:348 0:000 Type 17 Index = 1 5:348 0:000 Ignoring insane frequency value 0MHz 5:348 0:000 Type 17 Index = 2 5:348 0:000 SmbiosTable.Type17->SlotIndex = 2 5:348 0:000 SmbiosTable.Type17->ModuleSize = 8192MB 5:348 0:000 SmbiosTable.Type17->Type = 0 5:348 0:000 SmbiosTable.Type17->Frequency = 1333MHz 5:348 0:000 SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0 5:348 0:000 SmbiosTable.Type17->Vendor = Kingston 5:348 0:000 SmbiosTable.Type17->SerialNo = 14219300 5:348 0:000 SmbiosTable.Type17->PartNo = KHX1600C10D3/8G 5:348 0:000 Type 17 Index = 3 5:348 0:000 Ignoring insane frequency value 0MHz 5:348 0:000 Boot status=0 5:348 0:000 Running on: 'OptiPlex 790' with board '0J3C2F' 5:348 0:000 === [ GetCPUProperties ] ======================== 5:348 0:000 CPU Vendor = 756E6547 Model=206A7 5:348 0:000 The CPU supported SSE4.1 5:348 0:000 The CPU not supported RDRAND 5:348 0:000 BrandString = Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz 5:348 0:000 The CPU supported turbo 5:348 0:000 Energy PerfBias is visible: 5:348 0:000 MSR 0x35 40004 5:348 0:000 MSR 0xE2 before patch 1E008403 5:348 0:000 MSR 0xE2 is locked, PM patches will be turned on 5:348 0:000 MSR 0xCE 00001000_60012100 5:348 0:000 corrected FLEX_RATIO = E0000 5:348 0:000 MSR 0x1B0 00000000 5:348 0:000 FSBFrequency = 100 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz 5:348 0:000 MaxDiv/MinDiv: 33.0/16 5:348 0:000 Turbo: 34/35/36/37 5:348 0:000 Features: 0x179AE3BFBFEBFBFF 5:348 0:000 Threads: 4 5:348 0:000 Cores: 4 5:348 0:000 FSB: 100 MHz 5:348 0:000 CPU: 3300 MHz 5:348 0:000 TSC: 3300 MHz 5:348 0:000 PIS: 100 MHz 5:348 0:000 ExternalClock: 25 MHz 5:348 0:000 === [ GetDevices ] ============================== 5:348 0:000 Found more than one GOP protocol ??? Using the first one 5:348 0:000 GOP found at: PcieRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)/AcpiAdr(0x80010100) 5:348 0:000 PCI (00|00:00.00) : 8086 0100 class=060000 5:348 0:000 PCI (00|00:01.00) : 8086 0101 class=060400 5:348 0:000 PCI (00|01:00.00) : 10DE 128B class=030000 5:348 0:000 - GFX: Model=Asus GeForce GT 710 family 106 (Kepler) 5:348 0:000 - GOP: Provided by device 5:348 0:000 PCI (00|01:00.01) : 10DE 0E0F class=040300 5:348 0:000 - HDMI Audio: 5:348 0:000 PCI (00|00:16.00) : 8086 1C3A class=078000 5:348 0:000 PCI (00|00:16.03) : 8086 1C3D class=070002 5:348 0:000 PCI (00|00:19.00) : 8086 1502 class=020000 5:348 0:000 - LAN: 1 Vendor=Intel 5:348 0:000 Legacy MAC address of LAN #0= 78:2B:CB:A9:1E:0A: 5:348 0:000 PCI (00|00:1A.00) : 8086 1C2D class=0C0320 5:348 0:000 PCI (00|00:1B.00) : 8086 1C20 class=040300 5:348 0:000 PCI (00|00:1C.00) : 8086 1C10 class=060400 5:348 0:000 PCI (00|00:1C.02) : 8086 1C14 class=060400 5:348 0:000 PCI (00|03:00.00) : 1B73 1100 class=0C0330 5:348 0:000 PCI (00|00:1C.04) : 8086 1C18 class=060400 5:348 0:000 PCI (00|04:00.00) : 1B4B 9230 class=010601 5:348 0:000 PCI (00|00:1D.00) : 8086 1C26 class=0C0320 5:348 0:000 PCI (00|00:1E.00) : 8086 244E class=060401 5:348 0:000 PCI (00|00:1F.00) : 8086 1C4C class=060100 5:348 0:000 PCI (00|00:1F.02) : 8086 1C02 class=010601 5:348 0:000 PCI (00|00:1F.03) : 8086 1C22 class=0C0500 5:349 0:000 _checkOEMPath Look for oem dir at path '\EFI\CLOVER\OEM\OptiPlex 790--78-2B-CB-A9-1E-0A'. Dir doesn't exist. 5:349 0:000 _checkOEMPath Look for oem dir at path '\EFI\CLOVER\OEM\OptiPlex 790'. Dir doesn't exist. 5:349 0:000 _checkOEMPath Look for oem dir at path '\EFI\CLOVER\OEM\OptiPlex 790-3300'. Dir doesn't exist. 5:349 0:000 _checkOEMPath Look for oem dir at path '\EFI\CLOVER\OEM\0J3C2F'. Dir doesn't exist. 5:349 0:000 _checkOEMPath Look for oem dir at path '\EFI\CLOVER\OEM\0J3C2F-3300'. Dir doesn't exist. 5:350 0:000 === [ GetUserSettings ] ========================= 5:350 0:000 GetDefaultModel()=iMac12,1 5:352 0:002 Using config.plist at path: \EFI\CLOVER 5:352 0:000 Cannot find smbios.plist at path '\EFI\CLOVER' : Not Found 5:352 0:000 '\EFI\CLOVER\smbios.plist' not loaded. Efi error Not Found 5:352 0:000 BiosVersion: IM171.88Z.F000.B00.2106131747 5:352 0:000 BiosReleaseDate: 06/13/2021 5:352 0:000 EfiVersion: 429.140.8.0.0 5:352 0:000 Calibrated TSC Frequency = 3292523240 = 3292MHz 5:352 0:000 GOP found at: PcieRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)/AcpiAdr(0x80010100) 5:353 0:000 === [ GetListOfThemes ] ========================= 5:354 0:001 - [00]: ApplePark 5:355 0:000 - [01]: BW-Appleminimal 5:356 0:000 - [02]: Classy 5:358 0:001 - [03]: CloverBadge 5:358 0:000 - [04]: embedded 5:358 0:000 - [04]: gold_clover 5:360 0:001 - [05]: macOS 5:362 0:001 - [06]: MACOSX 5:363 0:001 - [07]: MacPro 5:365 0:001 - [08]: OCIntegration 5:366 0:000 - [09]: random 5:366 0:000 - [09]: System 5:367 0:000 === [ Found config plists ] ===================== 5:367 0:000 - config.plist 5:367 0:000 === [ LoadDrivers ] ============================= 5:368 0:000 Loading AudioDxe.efi status=Success 5:370 0:001 - driver needs connecting 5:370 0:000 Loading FSInject.efi status=Success 5:370 0:000 Loading XhciDxe.efi status=Success 5:371 0:000 - driver needs connecting 5:371 0:000 Loading AppleAPFS.efi status=Success 5:374 0:003 - driver needs connecting 5:374 0:000 Loading HFSPlus.efi status=Success 5:374 0:000 - driver needs connecting 5:374 0:000 4 drivers needs connecting ... 5:374 0:000 PlatformDriverOverrideProtocol->GetDriver overriden 5:374 0:000 HFS+ driver loaded 5:374 0:000 APFS driver loaded 10:522 5:147 === [ InitScreen ] ============================== 10:522 0:000 Console modes reported: 4, available modes: 10:522 0:000 - [01]: 80x25 10:522 0:000 - [02]: 80x50 10:522 0:000 - [03]: 100x31 10:522 0:000 - [04]: 240x56 (current mode) 10:522 0:000 SetScreenResolution: 1920x1080 - already set 10:522 0:000 SetScreenResolution: 1920x1080 - already set 10:522 0:000 Using embedded font 10:523 0:000 === [ ScanSPD ] ================================= 10:523 0:000 Scanning SMBus [8086:1C22], mmio: 0xDCC30004, ioport: 0x5000, hostc: 0x1 10:543 0:019 XMP is not present, XMPDetection deactivated in config.plist 10:543 0:000 Slot: 0 Type 24 8192MB 1600MHz Vendor=Kingston PartNo=KHX1600C10D38G SerialNo=0F214F00 10:562 0:019 XMP is not present, XMPDetection deactivated in config.plist 10:562 0:000 Slot: 2 Type 24 8192MB 1600MHz Vendor=Kingston PartNo=KHX1600C10D38G SerialNo=14219300 10:563 0:000 === [ GetAcpiTablesList ] ======================= 10:563 0:000 Get Acpi Tables List from RSDT: 10:563 0:000 - [00]: FACP CBX3 len=132 10:563 0:000 - [01]: APIC CBX3 len=204 10:563 0:000 - [02]: ASF! HCG len=165 10:563 0:000 - [03]: TCPA len=50 10:563 0:000 - [04]: SSDT TPM len=761 10:563 0:000 - [05]: MCFG SNDYBRDG len=60 10:563 0:000 - [06]: HPET PCHHPET len=56 10:563 0:000 - [07]: BOOT CBX3 len=40 10:563 0:000 - [08]: SSDT Cpu0Ist len=2052 10:563 0:000 - [09]: SSDT CpuPm len=2454 10:563 0:000 - [10]: SLIC CBX3 len=374 10:564 0:000 - [00]: Drop table : DMAR, 0 : no 10:564 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0) 10:564 0:000 Default theme: MACOSX 10:565 0:001 === [ Found DSDT tables ] ======================= 10:566 0:000 - DSDT.aml 10:566 0:000 === [ InitKextList ] ============================ 10:593 0:026 === [ ScanVolumes ] ============================= 10:593 0:000 Found 18 volumes with blockIO 10:593 0:000 - [00]: Volume: PcieRoot(0x0)\Pci(0x1C,0x4)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0) 10:593 0:000 Result of bootcode detection: bootable unknown (legacy) 10:593 0:000 - [01]: Volume: PcieRoot(0x0)\Pci(0x1C,0x4)\Pci(0x0,0x0)\Sata(0x2,0x0,0x0) 10:593 0:000 - [02]: Volume: PcieRoot(0x0)\Pci(0x1C,0x4)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(1,GPT,FF5CCAA5-9695-4AEA-A1FC-B213650B41DC,0x28,0x64000) 10:594 0:000 Result of bootcode detection: bootable unknown (legacy) 10:595 0:001 label : EFI 10:595 0:000 This is SelfVolume !! 10:595 0:000 - [03]: Volume: PcieRoot(0x0)\Pci(0x1C,0x4)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(2,GPT,AFEFAB4E-387B-4CA9-A43F-1DFAA5C62D57,0x64028,0x1BEC0460) 10:596 0:000 Result of bootcode detection: bootable unknown (legacy) 10:596 0:000 - [04]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0) 10:597 0:000 Result of bootcode detection: bootable unknown (legacy) 10:597 0:000 - [05]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,88A37DD0-4768-4C31-B0D4-CC8D6857550B,0x28,0x64000) 10:597 0:000 Result of bootcode detection: bootable unknown (legacy) 10:599 0:002 label : EFI 10:599 0:000 - [06]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,31E439A6-4510-4F32-96AC-8894C6985563,0x64028,0x1DC8F260) 10:600 0:000 Result of bootcode detection: bootable unknown (legacy) 10:600 0:000 - [07]: Volume: PcieRoot(0x0)\Pci(0x1C,0x4)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(2,GPT,AFEFAB4E-387B-4CA9-A43F-1DFAA5C62D57,0x64028,0x1BEC0460)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,C6A030F0495C014CBC33906ED6B27FCD) 10:600 0:000 apfsFileSystemUUID=F030A0C6-5C49-4C01-BC33-906ED6B27FCD, ApfsContainerUUID=B8E454A8-5898-4163-B9E8-907E12532A60, ApfsRole=0x10 10:601 0:001 label : Preboot 10:601 0:000 - [08]: Volume: PcieRoot(0x0)\Pci(0x1C,0x4)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(2,GPT,AFEFAB4E-387B-4CA9-A43F-1DFAA5C62D57,0x64028,0x1BEC0460)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,488D5A00EFC17545B3FE175B6E508602) 10:601 0:000 apfsFileSystemUUID=005A8D48-C1EF-4575-B3FE-175B6E508602, ApfsContainerUUID=B8E454A8-5898-4163-B9E8-907E12532A60, ApfsRole=0x40 10:637 0:035 label : SSD - Data 10:637 0:000 - [09]: Volume: PcieRoot(0x0)\Pci(0x1C,0x4)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(2,GPT,AFEFAB4E-387B-4CA9-A43F-1DFAA5C62D57,0x64028,0x1BEC0460)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,D90A4BDE2616DD419DEB3449D6782DCA) 10:637 0:000 apfsFileSystemUUID=DE4B0AD9-1626-41DD-9DEB-3449D6782DCA, ApfsContainerUUID=B8E454A8-5898-4163-B9E8-907E12532A60, ApfsRole=0x4 10:638 0:000 label : Recovery 10:638 0:000 - [10]: Volume: PcieRoot(0x0)\Pci(0x1C,0x4)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(2,GPT,AFEFAB4E-387B-4CA9-A43F-1DFAA5C62D57,0x64028,0x1BEC0460)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,EA5287333F581E4AB5AA48B67705BB46) 10:638 0:000 apfsFileSystemUUID=338752EA-583F-4A1E-B5AA-48B67705BB46, ApfsContainerUUID=B8E454A8-5898-4163-B9E8-907E12532A60, ApfsRole=0x8 10:638 0:000 label : VM 10:638 0:000 - [11]: Volume: PcieRoot(0x0)\Pci(0x1C,0x4)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(2,GPT,AFEFAB4E-387B-4CA9-A43F-1DFAA5C62D57,0x64028,0x1BEC0460)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,BC4E56D38B20FA4E9B10423AE9634BD6) 10:638 0:000 apfsFileSystemUUID=D3564EBC-208B-4EFA-9B10-423AE9634BD6, ApfsContainerUUID=B8E454A8-5898-4163-B9E8-907E12532A60, ApfsRole=0x1 10:648 0:010 label : SSD Catalina HD 10:648 0:000 - [12]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,31E439A6-4510-4F32-96AC-8894C6985563,0x64028,0x1DC8F260)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,E7FEAABC7DF12542B9AF99D3EBF2E7C8) 10:648 0:000 apfsFileSystemUUID=BCAAFEE7-F17D-4225-B9AF-99D3EBF2E7C8, ApfsContainerUUID=8AFE2861-1D6C-4BFE-A5A9-F8C9F59857EF, ApfsRole=0x10 10:649 0:001 label : Preboot 10:649 0:000 - [13]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,31E439A6-4510-4F32-96AC-8894C6985563,0x64028,0x1DC8F260)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,6D69124628665B4895C1D6BF3F931491) 10:649 0:000 apfsFileSystemUUID=4612696D-6628-485B-95C1-D6BF3F931491, ApfsContainerUUID=8AFE2861-1D6C-4BFE-A5A9-F8C9F59857EF, ApfsRole=0x40 10:665 0:015 label : Monterey HD - Data 10:665 0:000 - [14]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,31E439A6-4510-4F32-96AC-8894C6985563,0x64028,0x1DC8F260)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,D27CE079C917114690FF355032BFFEB9) 10:665 0:000 apfsFileSystemUUID=79E07CD2-17C9-4611-90FF-355032BFFEB9, ApfsContainerUUID=8AFE2861-1D6C-4BFE-A5A9-F8C9F59857EF, ApfsRole=0x4 10:665 0:000 label : Recovery 10:665 0:000 - [15]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,31E439A6-4510-4F32-96AC-8894C6985563,0x64028,0x1DC8F260)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,A297722D87E22240A274B8C063EDA9EA) 10:665 0:000 apfsFileSystemUUID=2D7297A2-E287-4022-A274-B8C063EDA9EA, ApfsContainerUUID=8AFE2861-1D6C-4BFE-A5A9-F8C9F59857EF, ApfsRole=0x8 10:665 0:000 label : VM 10:665 0:000 - [16]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,31E439A6-4510-4F32-96AC-8894C6985563,0x64028,0x1DC8F260)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,BE3FDAF64D00AF4897CF92789BBF207A) 10:665 0:000 apfsFileSystemUUID=F6DA3FBE-004D-48AF-97CF-92789BBF207A, ApfsContainerUUID=8AFE2861-1D6C-4BFE-A5A9-F8C9F59857EF, ApfsRole=0x1 10:671 0:006 label : Monterey-DISK 10:671 0:000 - [17]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,31E439A6-4510-4F32-96AC-8894C6985563,0x64028,0x1DC8F260)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,D11FE68993D11F47B3FB69B6A13ED9E6) 10:671 0:000 apfsFileSystemUUID=89E61FD1-D193-471F-B3FB-69B6A13ED9E6, ApfsContainerUUID=8AFE2861-1D6C-4BFE-A5A9-F8C9F59857EF, ApfsRole=0xc0 10:672 0:001 label : Update 10:672 0:000 Searching volumes for latest nvram.plist ... 10:672 0:000 Modified = 2022-3-1 3:34:50 (3929312090000 ms) 10:672 0:000 - newer - will use this one 10:672 0:000 Modified = 2022-3-1 3:34:50 (3929312090000 ms) 10:672 0:000 Loading nvram.plist from EFI index 0 begin load gNvramDict=0x0 10:673 0:000 loaded, size=1006 10:673 0:000 LoadLatestNvramPlist loaded Status=Success 10:673 0:000 === [ PutNvramPlistToRtVars ] =================== 10:673 0:000 Adding Key: EFILoginHiDPI: Size = 4, Data: 01 00 00 00 10:673 0:000 SetNvramVariable (EFILoginHiDPI, 7C436110-AB2A-4BBB-A880-FE41995C9F82, 0x6, 4): -> writing new (Success) 10:673 0:000 Adding Key: bluetoothActiveControllerInfo: Size = 16, Data: 01 00 12 0A 00 00 00 00 18 1D 00 1A 7D DA 71 13 10:673 0:000 SetNvramVariable (bluetoothActiveControllerInfo, 7C436110-AB2A-4BBB-A880-FE41995C9F82, 0x6, 16): -> writing new (Success) 10:673 0:000 Adding Key: csr-active-config: Size = 4, Data: 67 08 00 00 10:673 0:000 SetNvramVariable (csr-active-config, 7C436110-AB2A-4BBB-A880-FE41995C9F82, 0x6, 4): -> writing new (Success) 10:673 0:000 Adding Key: flagstate: Size = 32, Data: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10:673 0:000 SetNvramVariable (flagstate, 7C436110-AB2A-4BBB-A880-FE41995C9F82, 0x6, 32): -> writing new (Success) 10:673 0:000 Adding Key: fmm-computer-name: Size = 14, Data: 63 68 72 69 73 E2 80 99 73 20 69 4D 61 63 10:673 0:000 SetNvramVariable (fmm-computer-name, 7C436110-AB2A-4BBB-A880-FE41995C9F82, 0x6, 14): -> writing new (Success) 10:673 0:000 Adding Key: preferred-networks: Size = 192, Data: 00 00 00 00 00 00 00 00 04 00 05 00 0C 00 00 00 4E 65 74 77 6F 72 6B 2D 57 69 66 69 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20 00 00 00 16 79 07 CD D6 4B 02 04 B0 EA C9 C4 F0 FA D4 8E BD F2 94 82 21 B0 2A 4B 9A 14 BB B5 C6 52 D0 CA 10:673 0:000 SetNvramVariable (preferred-networks, 7C436110-AB2A-4BBB-A880-FE41995C9F82, 0x6, 192): -> writing new (Success) 10:673 0:000 Adding Key: prev-lang:kbd: Size = 8, Data: 66 72 2D 43 41 3A 38 30 10:673 0:000 SetNvramVariable (prev-lang:kbd, 7C436110-AB2A-4BBB-A880-FE41995C9F82, 0x6, 8): -> writing new (Success) 10:673 0:000 Adding Key: security-mode: String: Size = 4, Val = 'none' 10:673 0:000 SetNvramVariable (security-mode, 7C436110-AB2A-4BBB-A880-FE41995C9F82, 0x6, 4): -> writing new (Success) 10:673 0:000 Adding Key: wake-failure: Size = 5, Data: 00 00 00 00 00 10:673 0:000 SetNvramVariable (wake-failure, 7C436110-AB2A-4BBB-A880-FE41995C9F82, 0x6, 5): -> writing new (Success) 10:673 0:000 found 2 handles with audio 10:673 0:000 No AudioIoDevice stored 10:673 0:000 no stored audio parameters 10:673 0:000 Found Audio Device Nvidia (Unknown) (HDMI) at index 0 10:673 0:000 Found Audio Device Nvidia (Unknown) (HDMI) at index 1 10:673 0:000 Found Audio Device Realtek ALC269 (Speaker) at index 2 10:673 0:000 Found Audio Device Realtek ALC269 (LineOut) at index 3 10:673 0:000 Found Audio Device Realtek ALC269 (Headphones) at index 4 10:673 0:000 === [ InitXTheme ] ============================== 10:673 0:000 use Daylight theme 10:674 0:001 Using theme 'MACOSX' (MACOSX) 10:674 0:000 chosen theme MACOSX 10:674 0:000 OS main and drive as badge 10:705 0:030 sound play end with status=Device Error 10:706 0:001 theme inited 10:706 0:000 Chosen theme MACOSX 10:706 0:000 after NVRAM boot-args=-v keepsyms=1 alcid=11 10:706 0:000 === [ Dump SMC keys from NVRAM ] ================ 10:706 0:000 no AppleSMC protocol 10:706 0:000 === [ ScanLoader ] ============================== 10:706 0:000 - [02]: 'EFI' 10:709 0:002 AddLoaderEntry for Volume Name=EFI, idx=0 10:709 0:000 OSVersion= 10:709 0:000 IconName=unknown comma=-1 size=7 10:709 0:000 Full=unknown 10:709 0:000 Show badge as Drive. 10:709 0:000 Loader entry created for 'PcieRoot(0x0)\Pci(0x1C,0x4)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(1,GPT,FF5CCAA5-9695-4AEA-A1FC-B213650B41DC,0x28,0x64000)\EFI\BOOT\BOOTX64.efi' 10:709 0:000 Menu entry added at index 0 10:709 0:000 hiding entry because DiskKind is DISK_KIND_INTERNAL: \EFI\BOOT\BOOTX64.efi 10:709 0:000 - [05]: 'EFI' 10:710 0:001 AddLoaderEntry for Volume Name=EFI, idx=1 10:710 0:000 OSVersion= 10:710 0:000 IconName=unknown comma=-1 size=7 10:710 0:000 Full=unknown 10:710 0:000 Show badge as Drive. 10:710 0:000 Loader entry created for 'PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,88A37DD0-4768-4C31-B0D4-CC8D6857550B,0x28,0x64000)\EFI\BOOT\BOOTX64.efi' 10:710 0:000 Menu entry added at index 1 10:710 0:000 hiding entry because DiskKind is DISK_KIND_INTERNAL: \EFI\BOOT\BOOTX64.efi 10:710 0:000 - [07]: 'Preboot' 10:710 0:000 ApfsContainerUUID=B8E454A8-5898-4163-B9E8-907E12532A60 10:710 0:000 ApfsFileSystemUUID=F030A0C6-5C49-4C01-BC33-906ED6B27FCD 10:710 0:000 APFSTargetUUID=005A8D48-C1EF-4575-B3FE-175B6E508602 10:712 0:001 contentDetails name:SSD - Data 10:715 0:002 AddLoaderEntry for Volume Name=Preboot, idx=2 10:715 0:000 OSVersion=10.15.7 10:715 0:000 IconName=cata,mac comma=4 size=8 10:715 0:000 first=os_cata 10:716 0:000 Show badge as Drive. 10:716 0:000 Loader entry created for 'PcieRoot(0x0)\Pci(0x1C,0x4)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(2,GPT,AFEFAB4E-387B-4CA9-A43F-1DFAA5C62D57,0x64028,0x1BEC0460)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,C6A030F0495C014CBC33906ED6B27FCD)\005A8D48-C1EF-4575-B3FE-175B6E508602\com.apple.installer\boot.efi' 10:716 0:000 Menu entry added at index 2 10:716 0:000 APFSTargetUUID=D3564EBC-208B-4EFA-9B10-423AE9634BD6 10:716 0:000 AddLoaderEntry for Volume Name=Preboot, idx=3 10:718 0:001 OSVersion=10.15.7 10:718 0:000 Check if volume Is Hibernated: 10:718 0:000 Check sleep image 'by signature': 10:718 0:000 using default sleep image name = \private\var\vm\sleepimage 10:718 0:000 cannot open sleepimage -> Not Found 10:718 0:000 hibernated: no - sign 10:718 0:000 IconName=cata,mac comma=4 size=8 10:718 0:000 first=os_cata 10:718 0:000 Show badge as Drive. 10:718 0:000 Loader entry created for 'PcieRoot(0x0)\Pci(0x1C,0x4)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(2,GPT,AFEFAB4E-387B-4CA9-A43F-1DFAA5C62D57,0x64028,0x1BEC0460)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,C6A030F0495C014CBC33906ED6B27FCD)\D3564EBC-208B-4EFA-9B10-423AE9634BD6\System\Library\CoreServices\boot.efi' 10:719 0:000 Menu entry added at index 3 10:719 0:000 - [08]: 'SSD - Data' 10:719 0:000 ApfsContainerUUID=B8E454A8-5898-4163-B9E8-907E12532A60 10:719 0:000 ApfsFileSystemUUID=005A8D48-C1EF-4575-B3FE-175B6E508602 10:721 0:002 AddLoaderEntry for Volume Name=SSD - Data, idx=4 10:722 0:001 OSVersion=10.15.7 10:722 0:000 IconName=cata,mac comma=4 size=8 10:722 0:000 first=os_cata 10:722 0:000 Show badge as Drive. 10:722 0:000 Loader entry created for 'PcieRoot(0x0)\Pci(0x1C,0x4)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(2,GPT,AFEFAB4E-387B-4CA9-A43F-1DFAA5C62D57,0x64028,0x1BEC0460)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,488D5A00EFC17545B3FE175B6E508602)\macOS Install Data\Locked Files\Boot Files\boot.efi' 10:723 0:000 Menu entry added at index 4 10:723 0:000 - [09]: 'Recovery' 10:723 0:000 ApfsContainerUUID=B8E454A8-5898-4163-B9E8-907E12532A60 10:723 0:000 ApfsFileSystemUUID=DE4B0AD9-1626-41DD-9DEB-3449D6782DCA 10:723 0:000 APFSTargetUUID=005A8D48-C1EF-4575-B3FE-175B6E508602 10:723 0:000 contentDetails name:SSD - Data 10:723 0:000 APFSTargetUUID=D3564EBC-208B-4EFA-9B10-423AE9634BD6 10:723 0:000 AddLoaderEntry for Volume Name=Recovery, idx=5 10:725 0:001 OSVersion=10.15.7 10:725 0:000 IconName=cata,mac comma=4 size=8 10:725 0:000 first=os_cata 10:725 0:000 Show badge as Drive. 10:725 0:000 Loader entry created for 'PcieRoot(0x0)\Pci(0x1C,0x4)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(2,GPT,AFEFAB4E-387B-4CA9-A43F-1DFAA5C62D57,0x64028,0x1BEC0460)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,D90A4BDE2616DD419DEB3449D6782DCA)\D3564EBC-208B-4EFA-9B10-423AE9634BD6\boot.efi' 10:725 0:000 Menu entry added at index 5 10:725 0:000 - [10]: 'VM' 10:725 0:000 ApfsContainerUUID=B8E454A8-5898-4163-B9E8-907E12532A60 10:725 0:000 ApfsFileSystemUUID=338752EA-583F-4A1E-B5AA-48B67705BB46 10:726 0:000 - [11]: 'SSD Catalina HD' 10:726 0:000 ApfsContainerUUID=B8E454A8-5898-4163-B9E8-907E12532A60 10:726 0:000 ApfsFileSystemUUID=D3564EBC-208B-4EFA-9B10-423AE9634BD6 10:750 0:024 AddLoaderEntry for Volume Name=SSD Catalina HD, idx=6 10:751 0:000 OSVersion=10.15.7 10:751 0:000 Check if volume Is Hibernated: 10:751 0:000 Check sleep image 'by signature': 10:751 0:000 using default sleep image name = \private\var\vm\sleepimage 10:753 0:002 cannot open sleepimage -> Not Found 10:753 0:000 hibernated: no - sign 10:753 0:000 IconName=cata,mac comma=4 size=8 10:753 0:000 first=os_cata 10:753 0:000 Show badge as Drive. 10:753 0:000 Loader entry created for 'PcieRoot(0x0)\Pci(0x1C,0x4)\Pci(0x0,0x0)\Sata(0x0,0x0,0x0)\HD(2,GPT,AFEFAB4E-387B-4CA9-A43F-1DFAA5C62D57,0x64028,0x1BEC0460)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,BC4E56D38B20FA4E9B10423AE9634BD6)\System\Library\CoreServices\boot.efi' 10:753 0:000 Menu entry added at index 6 10:753 0:000 - [12]: 'Preboot' 10:753 0:000 ApfsContainerUUID=8AFE2861-1D6C-4BFE-A5A9-F8C9F59857EF 10:753 0:000 ApfsFileSystemUUID=BCAAFEE7-F17D-4225-B9AF-99D3EBF2E7C8 10:753 0:000 APFSTargetUUID=4612696D-6628-485B-95C1-D6BF3F931491 10:756 0:002 contentDetails name:Monterey-DISK 10:756 0:000 AddLoaderEntry for Volume Name=Preboot, idx=7 10:756 0:000 OSVersion=12.3 10:756 0:000 Check if volume Is Hibernated: 10:756 0:000 Check sleep image 'by signature': 10:756 0:000 using default sleep image name = \private\var\vm\sleepimage 10:756 0:000 cannot open sleepimage -> Not Found 10:756 0:000 hibernated: no - sign 10:756 0:000 IconName=monterey,mac comma=8 size=12 10:756 0:000 first=os_monterey 10:756 0:000 Show badge as Drive. 10:756 0:000 Loader entry created for 'PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,31E439A6-4510-4F32-96AC-8894C6985563,0x64028,0x1DC8F260)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,E7FEAABC7DF12542B9AF99D3EBF2E7C8)\4612696D-6628-485B-95C1-D6BF3F931491\System\Library\CoreServices\boot.efi' 10:757 0:000 Menu entry added at index 7 10:757 0:000 - [13]: 'Monterey HD - Data' 10:757 0:000 ApfsContainerUUID=8AFE2861-1D6C-4BFE-A5A9-F8C9F59857EF 10:757 0:000 ApfsFileSystemUUID=4612696D-6628-485B-95C1-D6BF3F931491 10:757 0:000 - [14]: 'Recovery' 10:757 0:000 ApfsContainerUUID=8AFE2861-1D6C-4BFE-A5A9-F8C9F59857EF 10:757 0:000 ApfsFileSystemUUID=79E07CD2-17C9-4611-90FF-355032BFFEB9 10:757 0:000 APFSTargetUUID=4612696D-6628-485B-95C1-D6BF3F931491 10:757 0:000 contentDetails name:Monterey-DISK 10:758 0:000 AddLoaderEntry for Volume Name=Recovery, idx=8 10:759 0:000 OSVersion=12.3 10:759 0:000 IconName=monterey,mac comma=8 size=12 10:759 0:000 first=os_monterey 10:759 0:000 Show badge as Drive. 10:759 0:000 Loader entry created for 'PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,31E439A6-4510-4F32-96AC-8894C6985563,0x64028,0x1DC8F260)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,D27CE079C917114690FF355032BFFEB9)\4612696D-6628-485B-95C1-D6BF3F931491\BaseSystem.dmg' 10:759 0:000 Menu entry added at index 8 10:759 0:000 - [15]: 'VM' 10:759 0:000 ApfsContainerUUID=8AFE2861-1D6C-4BFE-A5A9-F8C9F59857EF 10:759 0:000 ApfsFileSystemUUID=2D7297A2-E287-4022-A274-B8C063EDA9EA 10:759 0:000 - [16]: 'Monterey-DISK' 10:759 0:000 ApfsContainerUUID=8AFE2861-1D6C-4BFE-A5A9-F8C9F59857EF 10:759 0:000 ApfsFileSystemUUID=F6DA3FBE-004D-48AF-97CF-92789BBF207A 10:775 0:015 - [17]: 'Update' 10:775 0:000 ApfsContainerUUID=8AFE2861-1D6C-4BFE-A5A9-F8C9F59857EF 10:775 0:000 ApfsFileSystemUUID=89E61FD1-D193-471F-B3FB-69B6A13ED9E6 10:775 0:000 Entries list before ordering 10:775 0:000 Entry 0 : Boot UEFI internal from EFI (hidden) 10:775 0:000 Entry 1 : Boot UEFI internal from EFI (hidden) 10:775 0:000 Entry 2 : Boot Mac OS Install for SSD - Data via Preboot 10:775 0:000 Entry 3 : Boot Mac OS from SSD Catalina HD via Preboot 10:775 0:000 Entry 4 : Boot macOS Install from SSD - Data 10:775 0:000 Entry 5 : Boot Mac OS Recovery for SSD Catalina HD via Recovery 10:775 0:000 Entry 6 : Boot macOS from SSD Catalina HD 10:775 0:000 Entry 7 : Boot Mac OS from Monterey-DISK via Preboot 10:775 0:000 Entry 8 : Boot Mac OS Recovery for Monterey-DISK via Recovery 10:775 0:000 Hiding entry 2 because of entry 4 10:775 0:000 Hiding entry 3 because of entry 6 10:775 0:000 Move preboot entry 3 before system 6 10:775 0:000 Move recovery entry 5 after system 6 10:775 0:000 Entries after before ordering 10:775 0:000 Entry 0 : Boot UEFI internal from EFI (hidden) 10:775 0:000 Entry 1 : Boot UEFI internal from EFI (hidden) 10:775 0:000 Entry 2 : Boot Mac OS Install for SSD - Data via Preboot (hidden) 10:775 0:000 Entry 3 : Boot macOS Install from SSD - Data 10:775 0:000 Entry 4 : Boot Mac OS from SSD Catalina HD via Preboot (hidden) 10:775 0:000 Entry 5 : Boot macOS from SSD Catalina HD 10:775 0:000 Entry 6 : Boot Mac OS Recovery for SSD Catalina HD via Recovery 10:775 0:000 Entry 7 : Boot Mac OS from Monterey-DISK via Preboot 10:775 0:000 Entry 8 : Boot Mac OS Recovery for Monterey-DISK via Recovery 10:775 0:000 === [ AddCustomTool ] =========================== 10:776 0:001 === [ GetEfiBootDeviceFromNvram ] =============== 10:776 0:000 - [!] efi-boot-device-data not found 10:776 0:000 Default boot entry not found 10:776 0:000 BannerPlace at Clear Screen [835,57] 10:936 0:160 AnimeRun=0 11:043 0:107 GUI ready 16:065 5:021 BootVariable of the entry is empty 16:065 0:000 === [ StartLoader ] ============================= 16:065 0:000 Starting PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,31E439A6-4510-4F32-96AC-8894C6985563,0x64028,0x1DC8F260)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,E7FEAABC7DF12542B9AF99D3EBF2E7C8)\4612696D-6628-485B-95C1-D6BF3F931491\System\Library\CoreServices\boot.efi 16:065 0:000 Finally: ExternalClock=25MHz BusSpeed=99774kHz CPUFreq=3293MHz PIS: hw.busfrequency=100000000Hz 16:065 0:000 Beginning OC 16:065 0:000 OCST: Missing vault data, ignoring... 16:065 0:000 config-oc.plist isn't used at all 16:065 0:000 Bridge mmioWhiteList[0] to OC : comment=Haswell: SB_RCBA is a 0x4 page memory region, containing SPI_BASE at 0x3800 (SPI_BASE_ADDRESS) 16:065 0:000 Bridge mmioWhiteList[1] to OC : comment=Generic: PCI root is a 0x1000 page memory region used by some firmwares 16:065 0:000 AddKextsInArray from Other 16:065 0:000 ->Extra kext: Other\Lilu.kext (v.1.6.0) 16:065 0:000 ->Extra kext: Other\SMCProcessor.kext (v.1.2.9) 16:065 0:000 ->Extra kext: Other\SMCSuperIO.kext (v.1.2.9) 16:065 0:000 ->Extra kext: Other\RtWlanU.kext (v.1830.32.b27) 16:065 0:000 ->Extra kext: Other\VirtualSMC.kext (v.1.2.9) 16:065 0:000 ->Extra kext: Other\WhateverGreen.kext (v.1.5.7) 16:065 0:000 ->Extra kext: Other\USBPorts.kext (v.1.0) 16:065 0:000 ->Extra kext: Other\Intel6Series-Injector.kext (v.1.1) 16:065 0:000 ->Extra kext: Other\RtWlanU1827.kext (v.1827.4.b36) 16:065 0:000 ->Extra kext: Other\Marvell-Injector.kext (v.1.1) 16:065 0:000 ->Extra kext: Other\AppleALC.kext (v.1.6.6) 16:065 0:000 ->Extra kext: Other\IntelMausi.kext (v.1.0.8) 16:065 0:000 AddKextsInArray from Off 16:065 0:000 AddKextsInArray from 12 16:065 0:000 ->Extra kext: 12\BlueToolFixup.kext (v.2.6.1) 16:065 0:000 AddKextsInArray from 12_normal 16:065 0:000 AddKextsInArray from 12.3 16:065 0:000 AddKextsInArray from 12.3_normal 16:065 0:000 AddKextsInArray from 12.3.0 16:065 0:000 AddKextsInArray from 12.3.0_normal 16:065 0:000 Bridge kext to OC : Path=Lilu.kext 16:065 0:000 assign executable as 'Contents\MacOS\Lilu' 16:065 0:000 Bridge kext to OC : Path=VirtualSMC.kext 16:066 0:000 assign executable as 'Contents\MacOS\VirtualSMC' 16:066 0:000 Bridge kext to OC : Path=WhateverGreen.kext 16:066 0:000 assign executable as 'Contents\MacOS\WhateverGreen' 16:066 0:000 Bridge kext to OC : Path=AppleALC.kext 16:082 0:015 assign executable as 'Contents\MacOS\AppleALC' 16:082 0:000 Bridge kext to OC : Path=IntelMausi.kext 16:082 0:000 assign executable as 'Contents\MacOS\IntelMausi' 16:082 0:000 Bridge kext to OC : Path=SMCProcessor.kext 16:082 0:000 assign executable as 'Contents\MacOS\SMCProcessor' 16:082 0:000 Bridge kext to OC : Path=SMCSuperIO.kext 16:082 0:000 assign executable as 'Contents\MacOS\SMCSuperIO' 16:082 0:000 Bridge kext to OC : Path=USBPorts.kext 16:082 0:000 Bridge kext to OC : Path=RtWlanU.kext 16:084 0:002 assign executable as 'Contents\MacOS\RtWlanU' 16:084 0:000 Bridge kext to OC : Path=Intel6Series-Injector.kext 16:084 0:000 Bridge kext to OC : Path=RtWlanU1827.kext 16:086 0:001 assign executable as 'Contents\MacOS\RtWlanU1827' 16:086 0:000 Bridge kext to OC : Path=Marvell-Injector.kext 16:086 0:000 Bridge kext to OC : Path=BlueToolFixup.kext 16:087 0:000 assign executable as 'Contents\MacOS\BlueToolFixup' 16:089 0:001 Start 'OpenRuntime.efi' : Status Success 16:089 0:000 OC: OcMiscEarlyInit... 16:089 0:000 OC: OpenCore DBG-075-2022-02-26 is loading in Optional mode (0/0)... 16:089 0:000 OC: OcMiscMiddleInit... 16:089 0:000 OC: StorageHandle 0 with LauncherOption pointing to 16:089 0:000 OC: OcLoadUefiSupport... 16:089 0:000 OCRTC: OcAppleRtcRamInstallProtocol 16:089 0:000 OCRTC: Wake log is 0x00 0x00 0 0x00 16:089 0:000 OcAppleFbInfoInstallProtocol 16:089 0:000 OcAppleEg2InfoInstallProtocol 16:089 0:000 OC: Loading Apple Secure Boot with Disabled (level 0) 16:089 0:000 OCABC: ALRBL 0 RTDFRG 1 DEVMMIO 0 NOSU 0 NOVRWR 0 NOSB 0 FBSIG 0 NOHBMAP 0 SMSLIDE 1 WRUNPROT 1 16:089 0:000 OCABC: FEXITBS 0 PRMRG 0 CSLIDE 1 MSLIDE 0 PRSRV 0 RBMAP 1 VMAP 1 APPLOS 0 RTPERMS 1 ARBAR -1 16:089 0:000 OCABC: Got rendezvous with OpenRuntime r12 16:089 0:000 OCABC: MAT support is 0 16:089 0:000 OC: RequestBootVarRouting 0 16:089 0:000 OC: Increasing GPU BARs to 0 16:089 0:000 OCDM: Setting RBAR to 0 inc 1 on 3/19 16:089 0:000 OCDM: RBAR is unsupported by device - Not Found 16:089 0:000 OC: Got 0 drivers 16:089 0:000 OCC: GOP exists on ConsoleOutHandle and has 6 modes 16:089 0:000 OC: Requested resolution is 1920x1080@0 (max: 0, force: 0) from 1920x1080 16:089 0:000 OCC: Requesting 1920x1080@0 (max: 0) resolution, curr 4, total 6 16:089 0:000 OCC: Current FB at 0xD9000000 (0x1000000), format 1, res 1920x1080 scan 1920 16:089 0:000 OCC: Mode 0 - 640x480:1 16:089 0:000 OCC: Mode 1 - 800x600:1 16:089 0:000 OCC: Mode 2 - 1024x768:1 16:089 0:000 OCC: Mode 3 - 1280x1024:1 16:089 0:000 OCC: Mode 4 - 1920x1080:1 16:089 0:000 OCC: Current mode matches desired mode 4 16:089 0:000 OC: Changed resolution to 1920x1080@0 (max: 0, force: 0) from 1920x1080 - Already started 16:089 0:000 OCC: Using builtin text renderer with 1 scale 16:175 0:086 OCC: Install console control (CCDD1568/0/0), current - Success 16:175 0:000 OCC: Setup ASCII Output - Success 16:175 0:000 OC: Requested console mode is 0x0 (max: 0) from 16:175 0:000 OC: Requested not to use audio 16:175 0:000 OC: OcLoadAcpiSupport... 16:175 0:000 OC: OcLoadAcpiSupport : nothing to do 16:175 0:000 OC: OcMiscLateInit... 16:175 0:000 OC: Invalid HibernateMode: 16:175 0:000 OC: Translated HibernateMode to 0 16:175 0:000 OC: Hibernation activation - Invalid Parameter, hibernation wake - no 16:175 0:000 OC: OcLoadKernelSupport... 16:175 0:000 OC: All green, starting boot management... 16:178 0:002 OCB: Arch filtering CB5FA018(723512)->CB5FA018(723512) caps 4 - Success 16:178 0:000 ImageHandle = cb857318 16:264 0:086 GetOSVersion: 12.3 (21E5222a) 16:264 0:000 Will not patch boot.efi 16:264 0:000 === [ PatchSmbios ] ============================= 16:264 0:000 UpdateSmbiosString : BiosVersion=EfiVersion=429.140.8.0.0 16:264 0:000 UpdateSmbiosString : ReleaseDate=06/13/2021 16:264 0:000 void PatchTableType1(const SmbiosInjectedSettings &) : UpdateSmbiosString ProductName=iMac17,1 16:264 0:000 void PatchTableType2(const SmbiosInjectedSettings &) : UpdateSmbiosString ProductName=BoardNumber=Mac-DB15BD556843C820 16:264 0:000 void PatchTableType2(const SmbiosInjectedSettings &) : UpdateSmbiosString Version=BoardVersion=iMac17,1 16:264 0:000 insert table 9 for dev 0:0 16:264 0:000 insert table 9 for dev 0:1 16:264 0:000 insert table 9 for dev 19:0 16:264 0:000 Table 11 present, but rewritten for us 16:265 0:000 Do not inject memory table 16:265 0:000 Trusting SMBIOS... 16:265 0:000 Channels: 2 16:265 0:000 Interleave: 0 2 1 3 16:265 0:000 trusted SMBIOS data, table index 0: 16:265 0:000 gRAM.SMBIOS[0]->ModuleSize = 8192 16:265 0:000 gRAM.SMBIOS[0]->Type = 0 16:265 0:000 gRAM.SMBIOS[0]->Frequency = 1333 16:265 0:000 gRAM.SMBIOS[0]->Vendor = Kingston 16:265 0:000 gRAM.SMBIOS[0]->PartNo = KHX1600C10D3/8G 16:265 0:000 gRAM.SMBIOS[0]->SerialNo = 0F214F00 16:265 0:000 SPD data in use: 16:265 0:000 gRAM.SPD[0]->ModuleSize = 8192 16:265 0:000 gRAM.SPD[0]->Type = 24 16:265 0:000 gRAM.SPD[0]->Frequency = 1600 16:265 0:000 gRAM.SPD[0]->Vendor = Kingston 16:265 0:000 gRAM.SPD[0]->SerialNo = 0F214F00 16:265 0:000 gRAM.SPD[0]->PartNo = KHX1600C10D38G 16:265 0:000 SMBIOS Type 17 Index = 0 => SMBIOSIndex=0 SPDIndex=0: 16:265 0:000 BANK 0 DIMM0 1600MHz 8192MB(Ext:1296910660MB) 16:265 0:000 trusted SMBIOS data, table index 2: 16:265 0:000 gRAM.SMBIOS[2]->ModuleSize = 8192 16:265 0:000 gRAM.SMBIOS[2]->Type = 0 16:265 0:000 gRAM.SMBIOS[2]->Frequency = 1333 16:265 0:000 gRAM.SMBIOS[2]->Vendor = Kingston 16:265 0:000 gRAM.SMBIOS[2]->PartNo = KHX1600C10D3/8G 16:265 0:000 gRAM.SMBIOS[2]->SerialNo = 14219300 16:265 0:000 SPD data in use: 16:265 0:000 gRAM.SPD[2]->ModuleSize = 8192 16:265 0:000 gRAM.SPD[2]->Type = 24 16:265 0:000 gRAM.SPD[2]->Frequency = 1600 16:265 0:000 gRAM.SPD[2]->Vendor = Kingston 16:265 0:000 gRAM.SPD[2]->SerialNo = 14219300 16:265 0:000 gRAM.SPD[2]->PartNo = KHX1600C10D38G 16:265 0:000 SMBIOS Type 17 Index = 1 => SMBIOSIndex=2 SPDIndex=2: 16:265 0:000 BANK 1 DIMM0 1600MHz 8192MB(Ext:1296910660MB) 16:265 0:000 !trusted SMBIOS data, Table index 1:!gRAM.SMBIOS.doesSlotForIndexExist(SMBIOSIndex) 16:265 0:000 SMBIOS Type 17 Index = 2 => SMBIOSIndex=1 SPDIndex=1: 16:265 0:000 BANK 0 DIMM1 EMPTY 16:265 0:000 !trusted SMBIOS data, Table index 3:!gRAM.SMBIOS.doesSlotForIndexExist(SMBIOSIndex) 16:265 0:000 SMBIOS Type 17 Index = 3 => SMBIOSIndex=3 SPDIndex=3: 16:265 0:000 BANK 1 DIMM1 EMPTY 16:265 0:000 mTotalSystemMemory = 16384 16:265 0:000 NumberOfMemoryDevices = 4 16:265 0:000 Type20[0]->End = 0x7FFFFF, Type17[0] = 2000 16:265 0:000 Type20[1]->End = 0xFFFFFF, Type17[1] = 6000 16:265 0:000 Table 131 is present, CPUType=31 16:265 0:000 Change to: 603 16:265 0:000 === [ PatchACPI ] =============================== 16:265 0:000 OCABC: AllocPages 1 0xCF160000 (1) - Success 16:265 0:000 Xsdt reallocation done 16:265 0:000 OCABC: AllocPages 1 0xCF15F000 (1) - Success 16:265 0:000 old FADT length=F4 16:265 0:000 SignatureFixup: 0x0 -> 0x0 16:265 0:000 Found OperationRegion(GNVS, SystemMemory, CF788E18, ...) 16:265 0:000 Found OperationRegion(MCHT, SystemMemory, FED10000, ...) 16:265 0:000 Found OperationRegion(RCRB, SystemMemory, FED1C000, ...) 16:265 0:000 Found OperationRegion(WWPR, SystemMemory, CF779000, ...) 16:266 0:000 DSDT found in Clover volume: \EFI\CLOVER\ACPI\patched\DSDT.aml 16:267 0:001 OCABC: AllocPages 1 0xCF156000 (9) - Success 16:267 0:000 Apply DsdtFixMask=0x10400040 16:267 0:000 === [ FixBiosDsdt ] ============================= 16:267 0:000 Patching DSDT: 16:267 0:000 - [change SAT0 to SATA]: pattern 53415430, bin not found / already patched! 16:267 0:000 - [change EC0 to EC]: pattern 4543305F, bin not found / already patched! 16:267 0:000 deleting device CRT_ 16:268 0:000 deleting device DVI_ 16:269 0:000 deleting device SPKR 16:269 0:000 deleting device ECP_ 16:270 0:000 deleting device LPT_ 16:271 0:000 deleting device FDC0 16:271 0:000 deleting device ECP1 16:272 0:000 deleting device LPT1 16:272 0:000 deleting device FDC_ 16:273 0:000 OperationRegion (GNVS...) corrected from 0xCAF88E18 to addr=0xCF788E18 16:273 0:000 indirect name=SRCB 16:273 0:000 indirect name=SMIB 16:273 0:000 OperationRegion (WWPR...) corrected from 0xCAF79000 to addr=0xCF779000 16:273 0:000 OperationRegion (WWPR...) corrected from 0x0 to addr=0xCF779000 16:273 0:000 OperationRegion (WWPR...) corrected from 0x0 to addr=0xCF779000 16:273 0:000 OperationRegion (WWPR...) corrected from 0x0 to addr=0xCF779000 16:273 0:000 OperationRegion (WWPR...) corrected from 0x0 to addr=0xCF779000 16:273 0:000 OperationRegion (WWPR...) corrected from 0x0 to addr=0xCF779000 16:273 0:000 PreCleanup XSDT: count=10, length=116 16:273 0:000 PreCleanup XSDT, corrected XSDT: count=10, length=116 16:273 0:000 === [ ACPIPatchedAML ] ========================== 16:273 0:000 AutoMerge pass 1 16:273 0:000 Unsorted 16:273 0:000 Inserting SSDT-HMF.aml from \EFI\CLOVER\ACPI\patched: ignore on pass 1 16:273 0:000 === [ ACPIDropTables ] ========================== 16:273 0:000 OCABC: AllocPages 1 0xCF154000 (2) - Success 16:273 0:000 OCABC: AllocPages 1 0xCF154000 (2) - Success 16:273 0:000 OCABC: AllocPages 1 0xCF154000 (2) - Success 16:273 0:000 Patching SSDTs: 2 patches each 16:273 0:000 pattern 53415430, bin not found / already patched! 16:273 0:000 pattern 4543305F, bin not found / already patched! 16:273 0:000 Found OperationRegion(TPMR, SystemMemory, FED40000, ...) 16:273 0:000 OCABC: AllocPages 1 0xCF152000 (2) - Success 16:273 0:000 OCABC: AllocPages 1 0xCF152000 (2) - Success 16:273 0:000 OCABC: AllocPages 1 0xCF152000 (2) - Success 16:273 0:000 OCABC: AllocPages 1 0xCF152000 (2) - Success 16:273 0:000 Patching SSDTs: 2 patches each 16:273 0:000 pattern 53415430, bin not found / already patched! 16:273 0:000 pattern 4543305F, bin not found / already patched! 16:273 0:000 OCABC: AllocPages 1 0xCF150000 (2) - Success 16:273 0:000 Patching SSDTs: 2 patches each 16:273 0:000 pattern 53415430, bin not found / already patched! 16:273 0:000 pattern 4543305F, bin not found / already patched! 16:273 0:000 OCABC: AllocPages 1 0xCF14E000 (2) - Success 16:273 0:000 === [ ACPIPatchedAML ] ========================== 16:273 0:000 AutoMerge pass 2 16:273 0:000 Unsorted 16:273 0:000 Inserting SSDT-HMF.aml from \EFI\CLOVER\ACPI\patched: size=290 OCABC: AllocPages 1 0xCF14F000 (1) - Success ... Success 16:274 0:000 ApicCPUNum=4 16:274 0:000 Maximum control=0x21 16:274 0:000 Turbo control=0x25 16:274 0:000 P-States: min 0x10, max 0x25 16:274 0:000 SSDT with plugin-type without P-States is generated 16:274 0:000 OCABC: AllocPages 1 0xCF14E000 (1) - Success 16:274 0:000 Cleanup XSDT: count=12, length=132 16:274 0:000 corrected XSDT count=12, length=132 16:274 0:000 === [ RestSetup macOS ] ========================= 16:274 0:000 EdidDiscovered size=128 16:274 0:000 --- Discovered EDID Table size:128 16:274 0:000 000 | 00 FF FF FF FF FF FF 00 4C 2D 16:274 0:000 010 | AF 08 4C 45 55 5A 16 16 01 03 16:274 0:000 020 | 80 33 1D 78 2A 01 F1 A2 57 52 16:274 0:000 030 | 9F 27 0A 50 54 BF EF 80 71 4F 16:274 0:000 040 | 81 C0 81 00 81 80 95 00 A9 C0 16:274 0:000 050 | B3 00 01 01 02 3A 80 18 71 38 16:274 0:000 060 | 2D 40 58 2C 45 00 FE 1F 11 00 16:274 0:000 070 | 00 1E 00 00 00 FD 00 38 4B 1E 16:274 0:000 080 | 51 11 00 0A 20 20 20 20 20 20 16:274 0:000 090 | 00 00 00 FC 00 53 32 33 42 33 16:274 0:000 100 | 30 30 0A 20 20 20 20 20 00 00 16:274 0:000 110 | 00 FF 00 48 54 51 43 35 30 30 16:274 0:000 120 | 33 35 35 0A 20 20 01 37 16:274 0:000 NVidia GFX injection not set 16:274 0:000 CurrentMode: Width=1920 Height=1080 16:274 0:000 SetNvramVariable (system-id, 4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14, 0x2, 16): -> writing new (Success) 16:274 0:000 SetNvramVariable (MLB, 4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14, 0x6, 17): -> writing new (Success) 16:274 0:000 SetNvramVariable (ROM, 4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14, 0x6, 6): -> writing new (Success) 16:274 0:000 SetNvramVariable (FirmwareFeatures, 4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14, 0x6, 4): -> writing new (Success) 16:274 0:000 SetNvramVariable (FirmwareFeaturesMask, 4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14, 0x6, 4): -> writing new (Success) 16:274 0:000 SetNvramVariable (ExtendedFirmwareFeatures, 4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14, 0x6, 8): -> writing new (Success) 16:274 0:000 SetNvramVariable (ExtendedFirmwareFeaturesMask, 4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14, 0x6, 8): -> writing new (Success) 16:274 0:000 AddNvramVariable (HW_BID, 4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14, 0x6, 20): -> writing new (Success) 16:274 0:000 AddNvramVariable (security-mode, 7C436110-AB2A-4BBB-A880-FE41995C9F82, 0x7, 5): -> already exists, abort 16:274 0:000 DeleteNvramVariable (DefaultBackgroundColor, 4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14): 16:274 0:000 SetNvramVariable (UIScale, 4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14, 0x7, 1): -> writing new (Success) 16:274 0:000 SetNvramVariable (EFILoginHiDPI, 7C436110-AB2A-4BBB-A880-FE41995C9F82, 0x7, 4): exists(0x6, 4)DeleteNvramVariable (EFILoginHiDPI, 7C436110-AB2A-4BBB-A880-FE41995C9F82): 16:274 0:000 , diff. attr: deleting old (Success) -> writing new (Success) 16:274 0:000 SetNvramVariable (flagstate, 7C436110-AB2A-4BBB-A880-FE41995C9F82, 0x7, 32): exists(0x6, 32)DeleteNvramVariable (flagstate, 7C436110-AB2A-4BBB-A880-FE41995C9F82): 16:274 0:000 , diff. attr: deleting old (Success) -> writing new (Success) 16:274 0:000 SetNvramVariable (csr-active-config, 7C436110-AB2A-4BBB-A880-FE41995C9F82, 0x7, 4): exists(0x6, 4)DeleteNvramVariable (csr-active-config, 7C436110-AB2A-4BBB-A880-FE41995C9F82): 16:274 0:000 , diff. attr: deleting old (Success) -> writing new (Success) 16:274 0:000 DeleteNvramVariable (BridgeOSHardwareModel, 4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14): 16:274 0:000 DeleteNvramVariable (bootercfg, 7C436110-AB2A-4BBB-A880-FE41995C9F82): 16:274 0:000 DeleteNvramVariable (nvda_drv, 7C436110-AB2A-4BBB-A880-FE41995C9F82): 16:274 0:000 DeleteNvramVariable (recovery-boot-mode, 7C436110-AB2A-4BBB-A880-FE41995C9F82): 16:274 0:000 AddNvramVariable (wake-failure, 7C436110-AB2A-4BBB-A880-FE41995C9F82, 0x7, 5): -> already exists, abort 16:274 0:000 DeleteNvramVariable (opencore-version, 7C436110-AB2A-4BBB-A880-FE41995C9F82): 16:274 0:000 Use origin smbios table type 1 guid. 16:275 0:000 DeleteNvramVariable (efi-boot-device, 7C436110-AB2A-4BBB-A880-FE41995C9F82): 16:275 0:000 DeleteNvramVariable (efi-boot-device-data, 7C436110-AB2A-4BBB-A880-FE41995C9F82): 16:275 0:000 DeleteNvramVariable (BootCampHD, 7C436110-AB2A-4BBB-A880-FE41995C9F82): 16:275 0:000 Custom boot screen not used because entry has unset use graphics 16:275 0:000 DeleteNvramVariable (IOHibernateRTCVariables, 7C436110-AB2A-4BBB-A880-FE41995C9F82): 16:275 0:000 DeleteNvramVariable (boot-image, 7C436110-AB2A-4BBB-A880-FE41995C9F82): chris@iMac ~ % Update to Beta 5 today See Video Clover ESP Legacy boot0af Booting DELL Optiplex 790 From your attached video and this post (https://www.dell.com/community/Optiplex-Desktops/Dell-optiplex-790-secure-boot/td-p/7921217) it clearly show Dell Optiplex 790 had both UEFI & Legacy modes which's completely different from those hackintoshs had legacy only mode. Yours can create effective naram.plist, but ours can NOT. So it's unfair to state that legacy Clover can update at Big Sur or Monterey in legacy booting only hackintoshs. I sincerely hope that Clover devep team can solve this reboot loop issue as soon as possible, otherwise some users will shift to use OpenCore instead of Clover which I don't like to watch this happens because Clover is still my favorite bootloader in older hardwares. Edited May 17, 2022 by jsl2000 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1133/#findComment-2782390 Share on other sites More sharing options...
Slice Posted May 17, 2022 Share Posted May 17, 2022 A year ago all users were with OpenCore and now shifted to Clover. I still don't know what is the problem with update BigSur in legacy mode. For my mind there is no problem. 3 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1133/#findComment-2782395 Share on other sites More sharing options...
jsl2000 Posted May 17, 2022 Share Posted May 17, 2022 1 hour ago, Slice said: A year ago all users were with OpenCore and now shifted to Clover. I still don't know what is the problem with update BigSur in legacy mode. For my mind there is no problem. The problem for legacy Clover at Big Sur is the same reboot loop issue as at Monterey for update. The only reason I must use OpenCore in my legacy hackintoshs (e.g. ASUS P5Q PRO, P6TSE, M5A, Gigabyte GA-965P-DS4, etc) is pure for update of Big Sur or Monterey ! Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1133/#findComment-2782399 Share on other sites More sharing options...
Slice Posted May 17, 2022 Share Posted May 17, 2022 2 minutes ago, jsl2000 said: The problem for legacy Clover at Big Sur is the same reboot loop issue as at Monterey for update. The only reason I must use OpenCore in my legacy hackintoshs (e.g. ASUS P5Q PRO, P6TSE, M5A, Gigabyte GA-965P-DS4, etc) is pure for update of Big Sur or Monterey ! I never got reports and dumps about the issue and I can't check by myself to know what is the problem. Will it be enough to know that first reboot to "...Install Mac OS...", second and next reboots to "...Mac OS via Preboot..."? 2 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1133/#findComment-2782403 Share on other sites More sharing options...
jsl2000 Posted May 17, 2022 Share Posted May 17, 2022 (edited) On 5/17/2022 at 3:07 PM, Slice said: I never got reports and dumps about the issue and I can't check by myself to know what is the problem. Will it be enough to know that first reboot to "...Install Mac OS...", second and next reboots to "...Mac OS via Preboot..."? Thanks for your prompt reply. Please check what I had posted : https://github.com/CloverHackyColor/CloverBootloader/issues/502 The first reboot can not be successfully completed and "macOS installer" always present even after repeated reboot ! I guess without nvram.plist it can not create the correct installer data to complete the first reboot. Edited May 19, 2022 by jsl2000 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1133/#findComment-2782414 Share on other sites More sharing options...
helmi100 Posted May 17, 2022 Share Posted May 17, 2022 (edited) Is Clover compatible to the new Intel Z690 chipset ? I want to upgrade my build (Intel Z370) with an ASUS Z690 motherboard with an INTEL 12900K on it. What settings do I have to make ? Edited May 17, 2022 by helmi100 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1133/#findComment-2782422 Share on other sites More sharing options...
Slice Posted May 17, 2022 Share Posted May 17, 2022 4 hours ago, helmi100 said: Is Clover compatible to the new Intel Z690 chipset ? I want to upgrade my build (Intel Z370) with an ASUS Z690 motherboard with an INTEL 12900K on it. What settings do I have to make ? Clover is compatible with 690 chipset and with AlderLake CPU. But this doesn't mean you will have a success. Try the quirk ProvideCurrentCpuInfo. Use FakeCPUID. Do you have a discrete videocard? The Intel embedded graphics can't works and you should choose SMBIOS without IGPU. 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1133/#findComment-2782431 Share on other sites More sharing options...
MaLd0n Posted May 17, 2022 Share Posted May 17, 2022 5 hours ago, helmi100 said: Is Clover compatible to the new Intel Z690 chipset use this efi folder https://tinyurl.com/2weumujs from here https://www.olarila.com/topic/5676-hackintosh-efi-folders-for-all-chipsets-clover-and-opencore/ 4 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1133/#findComment-2782436 Share on other sites More sharing options...
helmi100 Posted May 18, 2022 Share Posted May 18, 2022 20 hours ago, Slice said: Clover is compatible with 690 chipset and with AlderLake CPU. But this doesn't mean you will have a success. Try the quirk ProvideCurrentCpuInfo. Use FakeCPUID. Do you have a discrete videocard? The Intel embedded graphics can't works and you should choose SMBIOS without IGPU. @ slice Thank you for the reply and your efforts for providing us with the excellent clover bootloader. Yes I'm aware, that the embedded graphics won't function. So I'll use the Radeon VII GPU from my old build. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1133/#findComment-2782469 Share on other sites More sharing options...
PG7 Posted May 18, 2022 Share Posted May 18, 2022 On 5/17/2022 at 9:07 AM, Slice said: I never got reports and dumps about the issue and I can't check by myself to know what is the problem. Will it be enough to know that first reboot to "...Install Mac OS...", second and next reboots to "...Mac OS via Preboot..."? ! Sorry, maybe I didn't understand with the translation! yes none of my (hackintosh) Legacy pc can get a full install or even update with Clover in BigSur or Monterey 2 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1133/#findComment-2782475 Share on other sites More sharing options...
Jief_Machak Posted May 20, 2022 Share Posted May 20, 2022 On 5/1/2022 at 3:25 PM, Matgen84 said: Hi @Slice Maybe I find the issue: when I build Clover, at the same time I build CloverConfigPlistValidator before make the PKG. Strangely, I can't build CloverConfigPlistValidator : [XCODE] - Building ccpv and archive ** BUILD FAILED ** The following build commands failed: CompileC /Users/mathieu/src/Cloverbootloader/Xcode/CloverConfigPlistValidator/build/CloverConfigPlistValidator.build/Release/CloverConfigPlistValidator.build/Objects-normal/x86_64/Config_GUI.o /Users/mathieu/src/Cloverbootloader/rEFIt_UEFI/Settings/ConfigPlist/Config_GUI.cpp normal x86_64 c++ com.apple.compilers.llvm.clang.1_0.compiler (1 failure) I mistaken somewhere ? Before all work fine. EDIT Same issue with Buildme script: can't build CloverConfigPlistValidator. CCPV OutPut 7.5 kB · 4 downloads Fixed. 2 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1133/#findComment-2782588 Share on other sites More sharing options...
Jief_Machak Posted May 20, 2022 Share Posted May 20, 2022 I can't find the post, but sorry for the unused var TmpGuid. I forgot to compile release before commiting. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1133/#findComment-2782591 Share on other sites More sharing options...
chris1111 Posted May 20, 2022 Share Posted May 20, 2022 3 2 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1133/#findComment-2782608 Share on other sites More sharing options...
matxpa Posted May 22, 2022 Share Posted May 22, 2022 On 5/20/2022 at 12:13 PM, Jief_Machak said: I can't find the post, but sorry for the unused var TmpGuid. I forgot to compile release before commiting. Hi Jief Look at your msg box and look for a message last Tuesday at 09:53 AM. Thanks for you commit ff01226 "Fix CCPV compilation" Greetings 2 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1133/#findComment-2782704 Share on other sites More sharing options...
Jief_Machak Posted May 24, 2022 Share Posted May 24, 2022 (edited) gcc12 fix is committed. Rebuild your base tools. The missing part was in GenFW tool. Edited May 24, 2022 by Jief_Machak 1 3 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1133/#findComment-2782759 Share on other sites More sharing options...
PG7 Posted May 24, 2022 Share Posted May 24, 2022 (edited) Hello Team Laptop HP DV6 2140ef intel core i5 M430 GeForce Nvidia GT 320M 8go DDR3 SSD boot Legacy *NO SUPPORTED UEFI Clover r5146 OC 0.8.1 any suggestions to the problem between version 12.2.1 and 12.3 in processor management! Opencore can still roll Clover is very slow and does not open Chrome or Edge any advice i take I remember that the two bootloaders use the same DSDT and SSDT as arguments, SMBIOS everything is identical as possible Spoiler only in OC I use this patch more <key>Patch</key> <array> <dict> <key>Arch</key> <string>x86_64</string> <key>Base</key> <string>_apfs_filevault_allowed</string> <key>Comment</key> <string>Force FileVault on Broken Seal</string> <key>Count</key> <integer>0</integer> <key>Enabled</key> <true/> <key>Find</key> <data></data> <key>Identifier</key> <string>com.apple.filesystems.apfs</string> <key>Limit</key> <integer>0</integer> <key>Mask</key> <data></data> <key>MaxKernel</key> <string></string> <key>MinKernel</key> <string>20.4.0</string> <key>Replace</key> <data>uAEAAADD</data> <key>ReplaceMask</key> <data></data> <key>Skip</key> <integer>0</integer> </dict> <dict> <key>Arch</key> <string>x86_64</string> <key>Base</key> <string>_cs_require_lv</string> <key>Comment</key> <string>Disable Library Validation Enforcement</string> <key>Count</key> <integer>0</integer> <key>Enabled</key> <true/> <key>Find</key> <data></data> <key>Identifier</key> <string>kernel</string> <key>Limit</key> <integer>0</integer> <key>Mask</key> <data></data> <key>MaxKernel</key> <string></string> <key>MinKernel</key> <string>20.0.0</string> <key>Replace</key> <data>uAAAAADD</data> <key>ReplaceMask</key> <data></data> <key>Skip</key> <integer>0</integer> </dict> <dict> <key>Arch</key> <string>x86_64</string> <key>Base</key> <string>_work_interval_port_type_render_server</string> <key>Comment</key> <string>MonteRand (12.1b1) #1</string> <key>Count</key> <integer>1</integer> <key>Enabled</key> <true/> <key>Find</key> <data>D8fxc/sh8TnRc/WJyUiLlM3Q/f//</data> <key>Identifier</key> <string>kernel</string> <key>Limit</key> <integer>3900</integer> <key>Mask</key> <data></data> <key>MaxKernel</key> <string>21.2.0</string> <key>MinKernel</key> <string>21.2.0</string> <key>Replace</key> <data>McmQkJAh8TnRc/WJyUiLlM3Q/f//</data> <key>ReplaceMask</key> <data></data> <key>Skip</key> <integer>0</integer> </dict> <dict> <key>Arch</key> <string>x86_64</string> <key>Base</key> <string>_panic_with_thread_context</string> <key>Comment</key> <string>MonteRand (12.1b1) #2</string> <key>Count</key> <integer>1</integer> <key>Enabled</key> <true/> <key>Find</key> <data>D8fyc/uD4g+D+gd38w+3NEE=</data> <key>Identifier</key> <string>kernel</string> <key>Limit</key> <integer>10100</integer> <key>Mask</key> <data></data> <key>MaxKernel</key> <string>21.2.0</string> <key>MinKernel</key> <string>21.2.0</string> <key>Replace</key> <data>MdKQkJCD4g+D+gd38w+3NEE=</data> <key>ReplaceMask</key> <data></data> <key>Skip</key> <integer>0</integer> </dict> <dict> <key>Arch</key> <string>x86_64</string> <key>Base</key> <string>_early_random</string> <key>Comment</key> <string>SurPlus v1 - PART 1 of 2 - Patch read_erandom (inlined in _early_random)</string> <key>Count</key> <integer>1</integer> <key>Enabled</key> <true/> <key>Find</key> <data>AHQjSIs=</data> <key>Identifier</key> <string>kernel</string> <key>Limit</key> <integer>800</integer> <key>Mask</key> <data></data> <key>MaxKernel</key> <string>21.1.0</string> <key>MinKernel</key> <string>20.4.0</string> <key>Replace</key> <data>AOsjSIs=</data> <key>ReplaceMask</key> <data></data> <key>Skip</key> <integer>0</integer> </dict> <dict> <key>Arch</key> <string>x86_64</string> <key>Base</key> <string>_register_and_init_prng</string> <key>Comment</key> <string>SurPlus v1 - PART 2 of 2 - Patch register_and_init_prng</string> <key>Count</key> <integer>1</integer> <key>Enabled</key> <true/> <key>Find</key> <data>ukgBAAAx9g==</data> <key>Identifier</key> <string>kernel</string> <key>Limit</key> <integer>256</integer> <key>Mask</key> <data></data> <key>MaxKernel</key> <string>21.1.0</string> <key>MinKernel</key> <string>20.4.0</string> <key>Replace</key> <data>ukgBAADrBQ==</data> <key>ReplaceMask</key> <data></data> <key>Skip</key> <integer>0</integer> </dict> <dict> <key>Arch</key> <string>x86_64</string> <key>Base</key> <string></string> <key>Comment</key> <string>Reroute kern.hv_vmm_present patch (1)</string> <key>Count</key> <integer>1</integer> <key>Enabled</key> <true/> <key>Find</key> <data>AGRpcmVjdF9oYW5kb2ZmAEVuYWJsZSBkaXJlY3QgaGFuZG9mZiBmb3IgcmVhbHRpbWUgdGhyZWFkcwA=</data> <key>Identifier</key> <string>kernel</string> <key>Limit</key> <integer>0</integer> <key>Mask</key> <data></data> <key>MaxKernel</key> <string></string> <key>MinKernel</key> <string>20.4.0</string> <key>Replace</key> <data>AGh2X3ZtbV9wcmVzZW50AEVuYWJsZSBkaXJlY3QgaGFuZG9mZiBmb3IgcmVhbHRpbWUgdGhyZWFkcwA=</data> <key>ReplaceMask</key> <data></data> <key>Skip</key> <integer>0</integer> </dict> <dict> <key>Arch</key> <string>x86_64</string> <key>Base</key> <string></string> <key>Comment</key> <string>Reroute kern.hv_vmm_present patch (2)</string> <key>Count</key> <integer>1</integer> <key>Enabled</key> <true/> <key>Find</key> <data>AGh2X2Rpc2FibGUAaHZfdm1tX3ByZXNlbnQA</data> <key>Identifier</key> <string>kernel</string> <key>Limit</key> <integer>0</integer> <key>Mask</key> <data></data> <key>MaxKernel</key> <string></string> <key>MinKernel</key> <string>20.4.0</string> <key>Replace</key> <data>AGh2X2Rpc2FibGUAZGlyZWN0X2hhbmRvZmYA</data> <key>ReplaceMask</key> <data></data> <key>Skip</key> <integer>0</integer> </dict> </array> Edited May 24, 2022 by PG7 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1133/#findComment-2782760 Share on other sites More sharing options...
Slice Posted May 24, 2022 Share Posted May 24, 2022 3 hours ago, PG7 said: Hello Team Laptop HP DV6 2140ef intel core i5 M430 GeForce Nvidia GT 320M 8go DDR3 SSD boot Legacy *NO SUPPORTED UEFI Clover r5146 OC 0.8.1 any suggestions to the problem between version 12.2.1 and 12.3 in processor management! Opencore can still roll Clover is very slow and does not open Chrome or Edge any advice i take I remember that the two bootloaders use the same DSDT and SSDT as arguments, SMBIOS everything is identical as possible Reveal hidden contents only in OC I use this patch more <key>Patch</key> <array> <dict> <key>Arch</key> <string>x86_64</string> <key>Base</key> <string>_apfs_filevault_allowed</string> <key>Comment</key> <string>Force FileVault on Broken Seal</string> <key>Count</key> <integer>0</integer> <key>Enabled</key> <true/> <key>Find</key> <data></data> <key>Identifier</key> <string>com.apple.filesystems.apfs</string> <key>Limit</key> <integer>0</integer> <key>Mask</key> <data></data> <key>MaxKernel</key> <string></string> <key>MinKernel</key> <string>20.4.0</string> <key>Replace</key> <data>uAEAAADD</data> <key>ReplaceMask</key> <data></data> <key>Skip</key> <integer>0</integer> </dict> <dict> <key>Arch</key> <string>x86_64</string> <key>Base</key> <string>_cs_require_lv</string> <key>Comment</key> <string>Disable Library Validation Enforcement</string> <key>Count</key> <integer>0</integer> <key>Enabled</key> <true/> <key>Find</key> <data></data> <key>Identifier</key> <string>kernel</string> <key>Limit</key> <integer>0</integer> <key>Mask</key> <data></data> <key>MaxKernel</key> <string></string> <key>MinKernel</key> <string>20.0.0</string> <key>Replace</key> <data>uAAAAADD</data> <key>ReplaceMask</key> <data></data> <key>Skip</key> <integer>0</integer> </dict> <dict> <key>Arch</key> <string>x86_64</string> <key>Base</key> <string>_work_interval_port_type_render_server</string> <key>Comment</key> <string>MonteRand (12.1b1) #1</string> <key>Count</key> <integer>1</integer> <key>Enabled</key> <true/> <key>Find</key> <data>D8fxc/sh8TnRc/WJyUiLlM3Q/f//</data> <key>Identifier</key> <string>kernel</string> <key>Limit</key> <integer>3900</integer> <key>Mask</key> <data></data> <key>MaxKernel</key> <string>21.2.0</string> <key>MinKernel</key> <string>21.2.0</string> <key>Replace</key> <data>McmQkJAh8TnRc/WJyUiLlM3Q/f//</data> <key>ReplaceMask</key> <data></data> <key>Skip</key> <integer>0</integer> </dict> <dict> <key>Arch</key> <string>x86_64</string> <key>Base</key> <string>_panic_with_thread_context</string> <key>Comment</key> <string>MonteRand (12.1b1) #2</string> <key>Count</key> <integer>1</integer> <key>Enabled</key> <true/> <key>Find</key> <data>D8fyc/uD4g+D+gd38w+3NEE=</data> <key>Identifier</key> <string>kernel</string> <key>Limit</key> <integer>10100</integer> <key>Mask</key> <data></data> <key>MaxKernel</key> <string>21.2.0</string> <key>MinKernel</key> <string>21.2.0</string> <key>Replace</key> <data>MdKQkJCD4g+D+gd38w+3NEE=</data> <key>ReplaceMask</key> <data></data> <key>Skip</key> <integer>0</integer> </dict> <dict> <key>Arch</key> <string>x86_64</string> <key>Base</key> <string>_early_random</string> <key>Comment</key> <string>SurPlus v1 - PART 1 of 2 - Patch read_erandom (inlined in _early_random)</string> <key>Count</key> <integer>1</integer> <key>Enabled</key> <true/> <key>Find</key> <data>AHQjSIs=</data> <key>Identifier</key> <string>kernel</string> <key>Limit</key> <integer>800</integer> <key>Mask</key> <data></data> <key>MaxKernel</key> <string>21.1.0</string> <key>MinKernel</key> <string>20.4.0</string> <key>Replace</key> <data>AOsjSIs=</data> <key>ReplaceMask</key> <data></data> <key>Skip</key> <integer>0</integer> </dict> <dict> <key>Arch</key> <string>x86_64</string> <key>Base</key> <string>_register_and_init_prng</string> <key>Comment</key> <string>SurPlus v1 - PART 2 of 2 - Patch register_and_init_prng</string> <key>Count</key> <integer>1</integer> <key>Enabled</key> <true/> <key>Find</key> <data>ukgBAAAx9g==</data> <key>Identifier</key> <string>kernel</string> <key>Limit</key> <integer>256</integer> <key>Mask</key> <data></data> <key>MaxKernel</key> <string>21.1.0</string> <key>MinKernel</key> <string>20.4.0</string> <key>Replace</key> <data>ukgBAADrBQ==</data> <key>ReplaceMask</key> <data></data> <key>Skip</key> <integer>0</integer> </dict> <dict> <key>Arch</key> <string>x86_64</string> <key>Base</key> <string></string> <key>Comment</key> <string>Reroute kern.hv_vmm_present patch (1)</string> <key>Count</key> <integer>1</integer> <key>Enabled</key> <true/> <key>Find</key> <data>AGRpcmVjdF9oYW5kb2ZmAEVuYWJsZSBkaXJlY3QgaGFuZG9mZiBmb3IgcmVhbHRpbWUgdGhyZWFkcwA=</data> <key>Identifier</key> <string>kernel</string> <key>Limit</key> <integer>0</integer> <key>Mask</key> <data></data> <key>MaxKernel</key> <string></string> <key>MinKernel</key> <string>20.4.0</string> <key>Replace</key> <data>AGh2X3ZtbV9wcmVzZW50AEVuYWJsZSBkaXJlY3QgaGFuZG9mZiBmb3IgcmVhbHRpbWUgdGhyZWFkcwA=</data> <key>ReplaceMask</key> <data></data> <key>Skip</key> <integer>0</integer> </dict> <dict> <key>Arch</key> <string>x86_64</string> <key>Base</key> <string></string> <key>Comment</key> <string>Reroute kern.hv_vmm_present patch (2)</string> <key>Count</key> <integer>1</integer> <key>Enabled</key> <true/> <key>Find</key> <data>AGh2X2Rpc2FibGUAaHZfdm1tX3ByZXNlbnQA</data> <key>Identifier</key> <string>kernel</string> <key>Limit</key> <integer>0</integer> <key>Mask</key> <data></data> <key>MaxKernel</key> <string></string> <key>MinKernel</key> <string>20.4.0</string> <key>Replace</key> <data>AGh2X2Rpc2FibGUAZGlyZWN0X2hhbmRvZmYA</data> <key>ReplaceMask</key> <data></data> <key>Skip</key> <integer>0</integer> </dict> </array> Show please Clover boot-log amy be I'll se what is the problem. @Jief_Machak gcc12 compilation [DLINK] CLOVERX64 lto-wrapper: warning: using serial compilation of 26 LTRANS jobs lto-wrapper: note: see the '-flto' option documentation for more information [OBJCOPY] CLOVERX64 [GENFW] CLOVERX64 FIXME reminder : __cxa_pure_virtual is undefined -> ignored. This is happening since gcc 12.1 for unknown reasons. Generating DUETEFIMAINFVX64 FV ### GUID cross reference file can be found at /Users/sergey/src/CloverBootloader/Build/Clover/RELEASE_GCC53/FV/Guid.xref FV Space Information DUETEFIMAINFVX64 [29%Full] 2752512 (0x2a0000) total, 815656 (0xc7228) used, 1936856 (0x1d8dd8) free - Done - Build end time: 20:11:31, May.24 2022 Build total time: 00:05:05 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1133/#findComment-2782762 Share on other sites More sharing options...
Slice Posted May 24, 2022 Share Posted May 24, 2022 https://stackoverflow.com/questions/920500/what-is-the-purpose-of-cxa-pure-virtual Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1133/#findComment-2782763 Share on other sites More sharing options...
Jief_Machak Posted May 24, 2022 Share Posted May 24, 2022 (edited) 10 minutes ago, Slice said: FIXME reminder : __cxa_pure_virtual is undefined -> ignored. This is happening since gcc 12.1 for unknown reasons. Yes, it is still strange that that symbol stays undefined. The one we define is NOT linked ! It's anyway a crash handler, so that's not too bad to ignore. But I'd like to keep a reminder to understand one day. Might as well be a gcc bug. 4 minutes ago, Slice said: https://stackoverflow.com/questions/920500/what-is-the-purpose-of-cxa-pure-virtual They say that "The Arduino IDE manages to avoid the linker error when building some programs because it compiles with the options "-ffunction-sections -fdata-sections" and links with "-Wl,--gc-sections", which drops some references to unused symbols." We have that and the reference is still there. I'll investigate. Edited May 24, 2022 by Jief_Machak 2 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1133/#findComment-2782764 Share on other sites More sharing options...
Slice Posted May 24, 2022 Share Posted May 24, 2022 Other interesting idea from stackoverflow Quote You may get this error when using the gcc command where you should be using g++; I've done it at least once 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1133/#findComment-2782768 Share on other sites More sharing options...
PG7 Posted May 24, 2022 Share Posted May 24, 2022 2 hours ago, Slice said: Show please Clover boot-log amy be I'll se what is the problem Spoiler Timestamp .textClippingSystem logs hackintoolpreboot.logboot logs hackintool2022-05-24_19-55_CLOVERX64.EFI.log0-100 0-100 MemLog inited,.textClipping 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1133/#findComment-2782772 Share on other sites More sharing options...
Slice Posted May 25, 2022 Share Posted May 25, 2022 10 hours ago, PG7 said: Hide contents Timestamp .textClipping 3.52 MB · 0 downloads System logs hackintool 866.97 kB · 0 downloads preboot.log 75.18 kB · 1 download boot logs hackintool 75 kB · 0 downloads 2022-05-24_19-55_CLOVERX64.EFI.log 91.96 kB · 0 downloads 0-100 0-100 MemLog inited,.textClipping 316.37 kB · 0 downloads First doubt I see 3:283 0:000 The CPU not supported RDRAND For this reason there are kernel patches 14:212 0:005 - [03]: Monterey RDRAND instruction #1 :: [OS: 12.4 | MatchOS: 12.x | MatchBuild: All] 14:214 0:002 check MatchOS 12.x 14:216 0:002 ==> allowed by OS 14:218 0:002 - [04]: Monterey RDRAND instruction #2 :: [OS: 12.4 | MatchOS: 12.x | MatchBuild: All] 14:220 0:002 check MatchOS 12.x 14:222 0:002 ==> allowed by OS 16:224 2:002 Will not patch boot.efi 16:227 0:002 Bridge kernel patch to OC : Monterey RDRAND instruction #1 16:230 0:003 Bridge kernel patch to OC : Monterey RDRAND instruction #2 Looks like OK. But I have a doubt the patch is still actual for new Monterey. We should double check if the pattern is the same. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1133/#findComment-2782786 Share on other sites More sharing options...
Recommended Posts