kushwavez Posted March 30, 2021 Share Posted March 30, 2021 (edited) Maybe you were quick enough to boot in the same minute? Because the log doesn't write seconds in the name, it simply overwrote it (or appended the new log to that one) because the name was the same. Edited March 30, 2021 by kushwavez 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1049/#findComment-2754248 Share on other sites More sharing options...
Matgen84 Posted March 30, 2021 Share Posted March 30, 2021 (edited) 19 minutes ago, kushwavez said: Maybe you were quick enough to boot in the same minute? Because the log doesn't write seconds in the name, it simply overwrote it (or appended the new log to that one) because the name was the same. Thanks. I think so: maybe too quick restart is the problem for the first test or something else. I could notice that the log doesn't overwrite the existing file, (1) is added at the name for quick restart. Edited March 30, 2021 by Matgen84 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1049/#findComment-2754249 Share on other sites More sharing options...
Jief_Machak Posted March 30, 2021 Share Posted March 30, 2021 Just now, MifJpn said: ⌘ Powered by Clover revision: 5132 (master, commit a5494a89f) As a reminder, checking the System Information once booted is NOT enough ! Many of my compilation will have the same commit number. I guess I will have to improve that ! 2 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1049/#findComment-2754256 Share on other sites More sharing options...
Matgen84 Posted March 30, 2021 Share Posted March 30, 2021 26 minutes ago, Jief_Machak said: As a reminder, checking the System Information once booted is NOT enough ! Many of my compilation will have the same commit number. I guess I will have to improve that ! @Jief_Machak You already do that in Clover "About" section : see @eng_redaesm screenshot Spoiler Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1049/#findComment-2754261 Share on other sites More sharing options...
Jief_Machak Posted March 30, 2021 Share Posted March 30, 2021 1 minute ago, LIMITANT said: @Jief_Machak Why I'm still seeing the old commit !! If you see the wrong one, it's because you used the wrong one ! Maybe you copied it the wrong place. Use BootloaderChooser, you'll never have that problem anymore ! 21 minutes ago, Matgen84 said: @Jief_Machak You already do that in Clover "About" section : see @eng_redaesm screenshot True, but if you forgot to do it, you have to reboot. And it'll take me 2 minutes (really) to have my build id instead of commit number on my own compilations. (Normal release will stay the same). 2 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1049/#findComment-2754266 Share on other sites More sharing options...
Matgen84 Posted March 30, 2021 Share Posted March 30, 2021 @MifJpn Just here for 'About section' Spoiler Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1049/#findComment-2754271 Share on other sites More sharing options...
Slice Posted March 30, 2021 Share Posted March 30, 2021 @MifJpn It is automatic substitution. But I am not sure about japanese keyboard Spoiler And about Quote Which key should I press to bring up the "About ... screen"? The key "A". Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1049/#findComment-2754273 Share on other sites More sharing options...
matxpa Posted March 30, 2021 Share Posted March 30, 2021 13 minutes ago, Slice said: @MifJpn It is automatic substitution. But I am not sure about japanese keyboard Reveal hidden contents And about The key "A". On my keyboard AZERTY, I've to press "Q" key (not "A") to access "About screen". 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1049/#findComment-2754275 Share on other sites More sharing options...
Slice Posted March 30, 2021 Share Posted March 30, 2021 11 minutes ago, matxpa said: On my keyboard AZERTY, I've to press "Q" key (not "A") to access "About screen". Looks like BIOS drivers not agree with you. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1049/#findComment-2754278 Share on other sites More sharing options...
matxpa Posted March 30, 2021 Share Posted March 30, 2021 9 hours ago, Jief_Machak said: @Matgen84 Could you test this version : CloverX64-2021-03-30-06-39-58-a5494a8-dirty-jief.zip ? and @eng_redaesm @tluck @MifJpn ? @Jief_Machak With your "CloverX64-2021-03-30-06-39-58-a5494a8-dirty-jief.efi" on Laptop Asus X75VB (MBP11,3) IvyBridge (I5-3340M HD4000) - Big Sur 11.2.3 (20D91) PreBoot and Recovery--> boot OK - Big Sur beta5 11.3 (20E5217a) PreBoot and Recovery--> boot OK 2 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1049/#findComment-2754279 Share on other sites More sharing options...
tluck Posted March 30, 2021 Share Posted March 30, 2021 11 hours ago, Jief_Machak said: @Matgen84 Could you test this version : CloverX64-2021-03-30-06-39-58-a5494a8-dirty-jief.zip ? and @eng_redaesm @tluck @MifJpn ? this version works too. Now is 30.03.2021, 15:37:13 (GMT) Starting Clover revision: 5132 (master, commit a5494a89f) on Lenovo EFI Build id: 2021-03-30-06-39-58-a5494a8-dirty-jief Build with: [jief] Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1049/#findComment-2754284 Share on other sites More sharing options...
Jief_Machak Posted March 30, 2021 Share Posted March 30, 2021 Good ! Thanks you very much for all the tests. Stay tuned : I'm now refactoring the properties settings structure and it's a hard one because they are mixed in struct where not all field are used... When done, I wouldn't be surprised on some other glitches... 4 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1049/#findComment-2754285 Share on other sites More sharing options...
PG7 Posted March 30, 2021 Share Posted March 30, 2021 13 hours ago, Jief_Machak said: @ Matgen84 Pourriez-vous tester cette version : CloverX64-2021-03-30-06-39-58-a5494a8-dirty-jief.zip ? et @eng_redaesm @tluck @MifJpn ? boot OK Spoiler 2 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1049/#findComment-2754290 Share on other sites More sharing options...
Jief_Machak Posted March 31, 2021 Share Posted March 31, 2021 Hi all, I've finally refactor the Device properties management in Clover. That was a huge nightmare, mainly because they were all using the same data structure with some field used in some case and some other never used in some other cases. Finding if something is NOT used is always harder than something where and when something is used ! As usual, any tests are welcomed as I can't test a lot of configuration... I also improved the menu. There is now 3 sub menu in Options->Pci devices : - Properties - Arbitrary Properties - Add Properties They, of course, correspond to the Config.plist section. In these menu, you can enable/disable each property. So please, confirm that your device properties seems to be well injected. Here is the efi : CloverX64-2021-03-31-18-47-00-a5494a8-dirty-jief.zip It's not committed yet, so please use this file. Do not compile the last commit (it's not working). You can now check you used the right file once booted in macOs by looking at the system information : The name must be the same as the efi file name when I posted it. 2 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1049/#findComment-2754355 Share on other sites More sharing options...
Matgen84 Posted March 31, 2021 Share Posted March 31, 2021 23 minutes ago, Jief_Machak said: Hi all, I've finally refactor the Device properties management in Clover. That was a huge nightmare, mainly because they were all using the same data structure with some field used in some case and some other never used in some other cases. Finding if something is NOT used is always harder than something where and when something is used ! As usual, any tests are welcomed as I can't test a lot of configuration... I also improved the menu. There is now 3 sub menu in Options->Pci devices : - Properties - Arbitrary Properties - Add Properties They, of course, correspond to the Config.plist section. In these menu, you can enable/disable each property. So please, confirm that your device properties seems to be well injected. Here is the efi : CloverX64-2021-03-31-18-47-00-a5494a8-dirty-jief.zip It's not committed yet, so please use this file. Do not compile the last commit (it's not working). You can now check you used the right file once booted in macOs by looking at the system information : The name must be the same as the efi file name when I posted it. @Jief_Machak I confirm: Boot fine (Z390 Big Sur 11.3 Beta 5). Thanks for your great work. I take a look to the submenu of Option/PCIdevices. I don't understand what 'Arbitrary Properties' and 'Add Properties' are ! Because I don't find these sections in Config-sample.plist Properties submenu, I like the checkbox. Is It possible to have also a checkbox for <key>PciRoot(0x0)/Pci(0x1c,0x1)/Pci(0x0,0x0)</key>, for example. So we can enable or disable all sub-keys in one time Sorry for my bad English. 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1049/#findComment-2754357 Share on other sites More sharing options...
eng_redaesm Posted March 31, 2021 Share Posted March 31, 2021 1 hour ago, Jief_Machak said: Hi all, I've finally refactor the Device properties management in Clover. That was a huge nightmare, mainly because they were all using the same data structure with some field used in some case and some other never used in some other cases. Finding if something is NOT used is always harder than something where and when something is used ! As usual, any tests are welcomed as I can't test a lot of configuration... I also improved the menu. There is now 3 sub menu in Options->Pci devices : - Properties - Arbitrary Properties - Add Properties They, of course, correspond to the Config.plist section. In these menu, you can enable/disable each property. So please, confirm that your device properties seems to be well injected. Here is the efi : CloverX64-2021-03-31-18-47-00-a5494a8-dirty-jief.zip It's not committed yet, so please use this file. Do not compile the last commit (it's not working). You can now check you used the right file once booted in macOs by looking at the system information : The name must be the same as the efi file name when I posted it. confirm boots well 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1049/#findComment-2754359 Share on other sites More sharing options...
eng_redaesm Posted March 31, 2021 Share Posted March 31, 2021 1 hour ago, Jief_Machak said: Hi all, I've finally refactor the Device properties management in Clover. That was a huge nightmare, mainly because they were all using the same data structure with some field used in some case and some other never used in some other cases. Finding if something is NOT used is always harder than something where and when something is used ! As usual, any tests are welcomed as I can't test a lot of configuration... I also improved the menu. There is now 3 sub menu in Options->Pci devices : - Properties - Arbitrary Properties - Add Properties They, of course, correspond to the Config.plist section. In these menu, you can enable/disable each property. So please, confirm that your device properties seems to be well injected. Here is the efi : CloverX64-2021-03-31-18-47-00-a5494a8-dirty-jief.zip It's not committed yet, so please use this file. Do not compile the last commit (it's not working). You can now check you used the right file once booted in macOs by looking at the system information : The name must be the same as the efi file name when I posted it. there is something strange i've noticed with this build HEVEC CODEC is not enabled but with this build working good On 3/30/2021 at 6:42 AM, Jief_Machak said: @Matgen84 Could you test this version : CloverX64-2021-03-30-06-39-58-a5494a8-dirty-jief.zip ? and @eng_redaesm @tluck @MifJpn ? 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1049/#findComment-2754361 Share on other sites More sharing options...
Jief_Machak Posted March 31, 2021 Share Posted March 31, 2021 2 hours ago, Matgen84 said: Because I don't find these sections in Config-sample.plist They exist under Device/Arbitrary and Devices/AppProperties. Maybe you just don't need it. 57 minutes ago, eng_redaesm said: but with this build working good Probably an injection problem... That's the only thing I've touched. @eng_redaesm Could you boot CloverX64-2021-03-31-21-48-49-a5494a8-dirty-jief.zip, check that HEVEC is enable and do "ioreg -lw0" > ioreg_ok.txt Then boot : CloverX64-2021-03-31-21-50-04-a5494a8-dirty-jief.zip. Check that HEVEC in not enabled and do "ioreg -lw0 > ioreg_nok.txt and send me the 2 files. 2 hours ago, Matgen84 said: Is It possible to have also a checkbox for <key>PciRoot(0x0)/Pci(0x1c,0x1)/Pci(0x0,0x0)</key>, for example I'm afraid that'll be too much work for now, due to the way the Clover menu system works. But I guess one day I'll refactor that too 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1049/#findComment-2754364 Share on other sites More sharing options...
Slice Posted March 31, 2021 Share Posted March 31, 2021 It works and all my Properties are injected as it should. 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1049/#findComment-2754365 Share on other sites More sharing options...
iCanaro Posted March 31, 2021 Share Posted March 31, 2021 I see that Clover is still stuck at this commit, https://github.com/CloverHackyColor/CloverBootloader/commit/a5494a89f69a6ba08f12e8d287b97ab100ca0539 if it has already been said, sorry, but I have not read all the posts, but with this the device properties section is not loaded Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1049/#findComment-2754368 Share on other sites More sharing options...
Jief_Machak Posted March 31, 2021 Share Posted March 31, 2021 10 minutes ago, iCanaro said: I see that Clover is still stuck at this commit, https://github.com/CloverHackyColor/CloverBootloader/commit/a5494a89f69a6ba08f12e8d287b97ab100ca0539 if it has already been said, sorry, but I have not read all the posts, but with this the device properties section is not loaded Yes, I forgot to commit the fix yesterday and I started this properties refactoring. That's why you have to use the efi I've posted here. If there is reasonable success, I'll commit everything. 2 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1049/#findComment-2754370 Share on other sites More sharing options...
iCanaro Posted March 31, 2021 Share Posted March 31, 2021 46 minutes ago, Jief_Machak said: They exist under Device/Arbitrary and Devices/AppProperties. Maybe you just don't need it. Probably an injection problem... That's the only thing I've touched. @eng_redaesm Could you boot CloverX64-2021-03-31-21-48-49-a5494a8-dirty-jief.zip, check that HEVEC is enable and do "ioreg -lw0" > ioreg_ok.txt Then boot : CloverX64-2021-03-31-21-50-04-a5494a8-dirty-jief.zip. Check that HEVEC in not enabled and do "ioreg -lw0 > ioreg_nok.txt and send me the 2 files. I'm afraid that'll be too much work for now, due to the way the Clover menu system works. But I guess one day I'll refactor that too with this version at first glance everything seems OK, even H264 and HEVC are OK Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1049/#findComment-2754371 Share on other sites More sharing options...
Jief_Machak Posted March 31, 2021 Share Posted March 31, 2021 43 minutes ago, Slice said: and all my Properties are injected as it should. @Slice Glad it works. Do you have any Device Properties ? or Arbitrary ? or AddProperties ? 3 minutes ago, iCanaro said: with this version at first glance everything seems OK, even H264 and HEVC are OK @iCanaro Which one ? There is 2 efi files in the poste you quoted. One is WITHOUT the refactor and one is WITH it. So it's important to know which one do you test. This one is the refactored one : CloverX64-2021-03-31-21-50-04-a5494a8-dirty-jief Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1049/#findComment-2754372 Share on other sites More sharing options...
iCanaro Posted March 31, 2021 Share Posted March 31, 2021 @Jief_Machak i used this CloverX64-2021-03-31-18-47-00-a5494a8-dirty-jief.zip you have device properties very populated in all the hacks, here for example the Z370 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1049/#findComment-2754374 Share on other sites More sharing options...
kushwavez Posted March 31, 2021 Share Posted March 31, 2021 (edited) All okay so far, using these properties: edit: with the .efi @Jief_Machak posted Edited March 31, 2021 by kushwavez Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1049/#findComment-2754375 Share on other sites More sharing options...
Recommended Posts