Clover General discussion

[Jief_Machak]

On 1/29/2021 at 4:55 PM, kushwavez said:

Of course here you are:

 

Preboot:

  Reveal hidden contents

 

"main" normal partition, should be hidden by default (but it's not):

  Reveal hidden contents

 

I have to manually hide the normal partition by config.plist/GUI/Hide. I also created a custom entry for Big Sur:

  Reveal hidden contents

 

2021-1-29_13-45-17_CLOVERX64.efi.log 72.61 kB · 1 download

 

Comment your hide section and your custom section in your config.plist and try this : CloverX64-2021-01-30-17-49-47-b5e0562-dirty-jief.zip

That should work and only propose the preboot volume, for installation as well as once installed. Doing that, you'll get a longer name under your icon. I plan to have a mode where only short clean name are displayed.

[kushwavez]

Yes, now it's hidden. Fixed, thanks, good job!

 

[kushwavez]

@Jief_Machak a question.

We did talk about FileVault drivers a while ago, and after debugging and your recommendation it seems we need AppleKeyFeeder.efi and AppleUiSupport.efi to get FileVault working properly. Clover's included drivers are bugged and take a lot of time to load (see here: https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/?do=findComment&comment=2745305)

 

 

Now AppleUiSupport.efi is not included in Clover releases, I need to download and add it manually. Can you include AppleUiSupport.efi in further releases (and if not needed, exclude other outdated FV efis. I need only AppleKeyFeeder and AppleUiSupport)?

 

The source of AppleUiSupport.efi: https://github.com/acidanthera/AppleSupportPkg/releases/tag/2.0.9

Thanks in advance. Clover is getting better and better. 

 

[deeveedee]

@PG7 If you're feeling adventurous with your Arrandale laptop, try patching your DSDT so that your LPCB.IOName is "3b09."  "3b09" is the IOName of LPCB in a real MacBookPro6,2 (Arrandale) and I find that even up through Catalina, macOS provides native power management with no CLOVER CPU/LPC patches.  Your current LPCB.IOName match is "3a18" which I think is the same as CLOVER's FakeLPC.

Edited January 31, 2021 by tonyx86

[PG7]

5 minutes ago, tonyx86 said:

ry patching your DSDT so that your LPCB.IOName

Spoiler

 

[deeveedee]

Perfect - just change "compatible" to "pci8086,3b09"

Edited January 31, 2021 by tonyx86

[PG7]

4 minutes ago, tonyx86 said:

Perfect - just change "compatible" to "pci8086,3b09"

 

I changed and it's already loaded

I had no problem with management ... but I always follow advice and test!

Thank you

 

 

MacBook Pro LPCB 3b09.zip

[Jief_Machak]

10 hours ago, kushwavez said:

@Jief_Machak a question.

We did talk about FileVault drivers a while ago, and after debugging and your recommendation it seems we need AppleKeyFeeder.efi and AppleUiSupport.efi to get FileVault working properly. Clover's included drivers are bugged and take a lot of time to load (see here: https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/?do=findComment&comment=2745305)

 

 

Now AppleUiSupport.efi is not included in Clover releases, I need to download and add it manually. Can you include AppleUiSupport.efi in further releases (and if not needed, exclude other outdated FV efis. I need only AppleKeyFeeder and AppleUiSupport)?

 

The source of AppleUiSupport.efi: https://github.com/acidanthera/AppleSupportPkg/releases/tag/2.0.9

Thanks in advance. Clover is getting better and better. 

 

I'm not taking care of release content and packages... Sorry.

[Slice]

10 hours ago, kushwavez said:

Clover's included drivers are bugged and take a lot of time to load (see here: https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/?do=findComment&comment=2745305)

 

 

I prefer to know what is wrong exactly instead of follow some unverified claims.

[kushwavez]

@Slice with Clover's included FileVault drivers it's taking very long time to boot (the log and the explanation are in the quoted link).

[LockDown]

Hi

I remember clover version 5115 used to auto detect model identifier even if i dont put smbios in config.plist. But later versions now defaults to MacPro3,1.

Is this also happening to any users or its just me? 

Edited January 31, 2021 by ellaosx

[Dmitriy85]

Everything works perfectly!

[Dmitriy85]

2 hours ago, ellaosx said:

Hi

I remember clover version 5115 used to auto detect model identifier even if i dont put smbios in config.plist. But later versions now defaults to MacPro3,1.

Is this also happening to any users or its just me? 

most likely only with you. SMBIOS must be filled in

[iCanaro]

updated from Clover 5122 to Clover 5129 my hack P55 signed. Setting the Quirks section of the config sample, pretty much went well as it was set 

 

 

ops true that it is not signed here.... 

Asus P7P55D-E EVO i7-860 GTX750 [Jurassic Hack]

Edited January 31, 2021 by iCanaro

[PG7]

45 minutes ago, iCanaro said:

ops true that it is not signed here.... 

Asus P7P55D-E EVO i7-860 GTX750 [Jurassic Hack]

 

the afternoon iCanaro

you could post an ioreg from that 1gen desktop so i can make a comparison!

thanks
Good sunday

[iCanaro]

17 minutes ago, PG7 said:

you could post an ioreg from that 1gen desktop so i can make a comparison!

thanks
Good sunday

ok 

P55iMac_iMac11.3.ioreg.zip

[iCanaro]

thank you very much @Jief_Machak !!! you can now get all MMIO addresses by debugging in Clover. 

 

if I haven't misunderstood, now you can get them

https://github.com/CloverHackyColor/OpenCorePkg/commit/78708c2edcfb358a6577f92a6afda1f99f2f48a0

 

 

[JorgeMax]

@Jief_Machakis it possible to prevent the clover from creating these "entries" (Mac OS X) in the process of installing and updating the system on the boot selection screen?

Spoiler

 

[iCanaro]

19 minutes ago, JorgeMax said:

is it possible to prevent the clover from creating these "entries" (Mac OS X) in the process of installing and updating the system on the boot selection screen?

mmmmm the famous ghost entries, I'm not sure, but I think they are generated by macOS and not by Clover; the same thing happens with OC

[lazzy]

Hello, 

My current cloverbootloader is version 5123. It works fine with Skylake. I have tried updating to newer version 5124 -> 5129 (built-in OpenCore). it doesn't work stop at ++++++++. What can I do to debug and report this issue?

[kushwavez]

@lazzy you need the "Quirks" section from the Clover.zip/config-sample.plist for Clover v5124<. Place it into your config.plist end.

Also place OpenRuntime.efi to drivers/UEFI from drivers/off/UEFI/MemoryFix/

[Matgen84]

16 minutes ago, lazzy said:

Hello, 

My current cloverbootloader is version 5123. It works fine with Skylake. I have tried updating to newer version 5124 -> 5129 (built-in OpenCore). it doesn't work stop at ++++++++. What can I do to debug and report this issue?

Hi @lazzy

Please, complete your signature with the details of your configuration (processor, motherboard, etc.)

There is a topic guide to convert r5123-5124 --> new Clover r5129 include.

 

[JorgeMax]

1 hour ago, iCanaro said:

mmmmm the famous ghost entries, I'm not sure, but I think they are generated by macOS and not by Clover; the same thing happens with OC

 

I already tested with the OC. Here with him did not create

[chris1111]

ApplePark theme for Clover 

[Pene]

@Slice

 

Hi again, how are you?

 

For a very long time, I keep noticing these errors when building Clover (I also see references on the web with this errors in build logs, so it's not only here)

make: [~/src/CloverBootloader/Build/Clover/RELEASE_GCC53/FV/Ffs/A17F4A89-5F19-444f-B7BE-48195E0575DBSmbiosGenDxe/SmbiosGenDxeOffset.raw] Error 1 (ignored)
..
make: [~/src/CloverBootloader/Build/Clover/RELEASE_GCC53/FV/Ffs/FC5C7020-1A48-4198-9BE2-EAD5ABC8CF2FBdsDxe/BdsDxeOffset.raw] Error 1 (ignored)
..
make: [~/src/CloverBootloader/Build/Clover/RELEASE_GCC53/FV/Ffs/E660EA85-058E-4b55-A54B-F02F83A24707DisplayEngine/DisplayEngineOffset.raw] Error 1 (ignored)

Building seems to completely successfully, but I don't use legacy environment anymore, so I am unsure if this affects anything.

Do you have any idea what these errors are?