Clover General discussion

[iCanaro]

here's a sequence of screenshots to try to make clover's current behavior understood

my hack Z97

 

Spoiler

 

[iCanaro]

the first 5 screenshots refer to what you see in the GUI on the first reboot during catalin update
the last 3 screenshots, on the other hand, are related to successful installation

[Henry2010]

2 hours ago, iCanaro said:

 

I performed the catalina update to the 19H5 on X570, Z370, Z68 and Z97 and in all this anomaly, perhaps due to the partition scanning algorithm that Clover has at boot; but the update happened everywhere without any difficulty, just choose the right icon

reset nvram with f11 then to the push f3 gui to view all partitions @Henry2010

Well I think Clover and OC both work as expected.

I just can't find out what's wrong with the installer or the system, because it always fails when it's "17 mins remaining". And it says something like an unexpected error occurred while moving files to the final destination.

I wonder if it's like Big Sur beta 10; the system volume is locked and only a full macOS installer would work.

Edited November 6, 2020 by Henry2010

[PG7]

Lenovo ThinkCentre M93 
intel i5-4460S 
intel HD4600 + Nvidia GTX760
28Go RAM
SSD

 

Bootloader Clover r5126

 

*the error also occurs with OpenCore

 

@Jief_Machak @Slice @iCanaro ......

 

Hello,
I have an installation problem with this PC!
Just in Catalina I manage to install all the MacOS versions
from an SSD or HDD with BigSur 11.0.1 I boot without concern on the system
for the installation or even an update from Catalina I always have an error ...
I don't know where the error is I have already looked on the bios and tested with several combinations but the error is the same all the time, so I think that must have one more security but I cannot find the solution

thank you to those who will have an answer or even the solution

 

Google Traduction! 

 

Divulgacher

 

 

Historique du programme d'installation 6-nov.-2020.txt

journal de débogage

Edited November 6, 2020 by PG7

[iCanaro]

@PG7 I remember seeing this error with the first Big Sur tests on the Z68; then I changed pretty much all the kexts I used and also adopted the ctlnAHCIPort.kext
then I disappeared, but the precise solution I did not understand what it was.

[PG7]

1 minute ago, iCanaro said:

@PG7 I remember seeing this error with the first Big Sur tests on the Z68; then I changed pretty much all the kexts I used and also adopted the ctlnAHCIPort.kext
then I disappeared, but the precise solution I did not understand what it was.

 

my kext are the last

 

I also use ctlnAHCIPort.kext
afterwards I also have this error on a laptop but I changed the USB port and it worked

here I have already tested by changing the USB port, using USB2 and USB3 as well as trying to install to an external HDD but the error continues!

[iCanaro]

@PG7 I throw it at you like this, since you are not a beginner but a very experienced user.... you tried adding USBinjectall??? only for when you update/install, since I understand run installation from USB

[PG7]

8 minutes ago, iCanaro said:

you tried adding USBinjectall???

 

Yes 

 

+ testee

 

1 = FakePCIID.kext + FakePCIID.XHCIMux

2 = USBinjectall.kext + XHCI-unsupported.kext

3 = Mappage ports USB

 

teste

 

1 = SATA-unsupported.kext

2 = CtlnaAHCIPort.kext

3 = NVMeFix.kext

 

Mappage USB .....

Edited November 6, 2020 by PG7

[Slice]

Just installed BigSur 11.0.1RC by Clover 5126 commit e314f72e5 .

It works. While during installation I had many times KP and reboots in different places at different stages. No rules.

Looks like random crashes.

[iCanaro]

Z170 where I only have high sierra and macOS catalina
here's the GUI on the first restart during catalina update

 

Spoiler

 

last screenshot GUI after the upgrade is finished

 

Edited November 6, 2020 by iCanaro

[Slice]

And yes, booting Mojave I have no such crashes.

[Henry2010]

11 minutes ago, Slice said:

Just isnstalled BigSur 11.0.1RC by Clover 5126 commit e314f72e5 .

It works. While during installation I had many times KP and reboots in different places at different stages. No rules.

Looks like random crashes.

Could it be com.apple.watchdogd?

I got KP too when updating from 10.15.6 to .7 and watchdog=0 fixed it

Edited November 6, 2020 by Henry2010

[iCanaro]

7 minutes ago, Henry2010 said:

watchdog=0

 is this a boot arguments?? @Henry2010

[Henry2010]

2 minutes ago, iCanaro said:

 is this a boot arguments?? @Henry2010

I thought you all knew about this VirtualSMC's argument?

[Henry2010]

21 minutes ago, iCanaro said:

Z170 where I only have high sierra and macOS catalina
here's the GUI on the first restart during catalina update

 

  Reveal hidden contents

 

last screenshot GUI after the upgrade is finished

 

 

 

Yes, also HS and Cata here. And Clover shows the same.

 

Quote (https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/?do=findComment&comment=2743131)

Now I wonder what's wrong with the macOS itself...

 

[Slice]

21 minutes ago, Henry2010 said:

I thought you all knew about this VirtualSMC's argument?

I am not using VirtualSMC at all.

[PG7]

2 minutes ago, Slice said:

I am not using VirtualSMC at all.

@Slice

  = FakeSMC mad in Slice 

I haven't tested FakeSMC yet to see if this error that I have

[naiclub]

The update went smoothly.

[maclinuxG4]

for mac os high sierra, a test for scan partition is to do (recovery see only on usb  installer)

thanks

[D-an-W]

Can anyone confirm the Big Sur that Catalina currently downloads is the latest release please?

 

[MacKonsti]

My Lenovo laptop Core i5-8265U and Clover r5123.1 fails to boot after the update, I've been battling for an hour but to no avail.

Updater rebooted to "Preboot" OK, finished the OS update, but the next reboot that's supposed to be normal, gets stuck after showing the continuous list of [IGPU] boot lines

My CAPS-LOCK key light can be on/off meaning there's something stuck in the boot process, computer doesn't seem frozen... I have no idea if it's an injected kext causing this.

Anyone having similar symptoms?

[PG7]

Il y a 7 heures, PG7 a déclaré:

Lenovo ThinkCentre M93 
intel i5-4460S 
intel HD4600 + Nvidia GTX760
28Go RAM
SSD

 

Bootloader Clover r5126

 

* l'erreur se produit également avec OpenCore

 

@ Jief_Machak @Tranche @iCanaro ......

 

Bonjour,
j'ai un problème d'installation avec ce PC!
Juste dans Catalina j'arrive à installer toutes les versions
de MacOS à partir d'un SSD ou d'un HDD avec BigSur 11.0.1 Je démarre sans souci sur le système
pour l'installation ou même une mise à jour de Catalina j'ai toujours une erreur ...
je ne sais pas où l'erreur est j'ai déjà regardé sur le bios et testé avec plusieurs combinaisons mais l'erreur est la même tout le temps, donc je pense que cela doit avoir une sécurité de plus mais je ne trouve pas la solution

merci à ceux qui auront une réponse voire la solution

 

Google Traduction! 

 

 

J'ai installé le BigSur beta 11.0.1 RC sur le SSD sur un autre PC. Ici, tout fonctionne bien, mais il se passe quelque chose avec Haswell «pas du tout», je ne peux pas l'installer sur certains !!!

impressions de lui travaillant déjà sans problèmes!

 

Je ne peux tout simplement pas obtenir l'installation pour cela Ni Clover ni OpenCore !!!

 

Google Traduction ! 

 

Divulgacher

 

Edited November 6, 2020 by PG7

[maclinuxG4]

during update r5122 to r5126, (https://github.com/CloverHackyColor/CloverBootloader/commit/aee426fa30103cc1ab7a8a7ae4434721eb1a9960) sounds is alright (outputs /inputs CM including HMDI)

all version after sounds may be broken for all outputs/inputs sounds on CM(SPDIF,..) and HDMI too. (no sound for the test during boot before black screen ) 

 

This is unexpected if anyone encounters this case, report it. Clover.log seems ok, only system.log may notice with kernel error.

(it is not the order to load kext.)

 

by he way this report  may be link with this ( no audioDxe.efi in my EFI), but  no 'pop' during boot

https://github.com/CloverHackyColor/CloverBootloader/issues/187

 

 

 

Edited November 6, 2020 by maclinuxG4

[iCanaro]

Updated with Clover my X570 T-RyZo 
LILU - WEG - VirtualSMC --> in other folder  
used config with enabled only kerneltopatch for bigsur  

 

[Henry2010]

8 hours ago, Slice said:

I am not using VirtualSMC at all.

Disabling watchdog via launchctl should do the trick as well, if you find it necessary.

Edited November 7, 2020 by Henry2010