Atikin Posted November 5, 2013 Share Posted November 5, 2013 in 10.9 this kext have some problems with sleep: 10/16/13 1:35:38.656 PM WindowServer[131]: device_generate_desktop_screenshot: authw 0x0(0), shield 0x7fe71d969410(2001) 10/16/13 1:35:38.670 PM WindowServer[131]: device_generate_lock_screen_screenshot: authw 0x0(0), shield 0x7fe71d969410(2001) 10/16/13 1:35:39.258 PM WindowServer[131]: _CGXHWCaptureWindowList: No capable active display found. 10/16/13 1:35:54.338 PM WindowServer[131]: _CGXHWCaptureWindowList: No capable active display found. 10/16/13 1:35:57.000 PM kernel[0]: [ALXEthernet] Wake on magic packet enabled. 10/16/13 1:35:57.000 PM kernel[0]: Fixing incorrect zfree from zone kalloc.16 to zone kalloc.32 10/16/13 1:35:57.000 PM kernel[0]: Fixing incorrect zfree from zone kalloc.16 to zone kalloc.32 10/16/13 1:35:57.000 PM kernel[0]: Fixing incorrect zfree from zone kalloc.16 to zone kalloc.32 10/16/13 1:35:57.000 PM kernel[0]: Fixing incorrect zfree from zone kalloc.16 to zone kalloc.32 -a lot of the same lines- 10/16/13 1:35:57.000 PM kernel[0]: Fixing incorrect zfree from zone kalloc.16 to zone kalloc.32 10/16/13 1:35:57.000 PM kernel[0]: Fixing incorrect zfree from zone kalloc.16 to zone kalloc.32 10/16/13 1:35:57.000 PM kernel[0]: Fixing incorrect zfree from zone kalloc.16 to zone kalloc.32 10/16/13 1:35:57.000 PM kernel[0]: *** kernel exceeded 500 log message per second limit - remaining messages this second discarded *** 10/16/13 1:35:57.334 PM configd[18]: arp_client_transmit(en1) failed, Network is down (50) 10/16/13 1:35:57.334 PM configd[18]: DHCP en1: ARP detect ROUTER failed, arp_client_transmit(en1) failed, Network is down (50) 10/16/13 1:36:06.000 PM kernel[0]: Previous Sleep Cause: 5 10/16/13 1:36:06.000 PM kernel[0]: The USB device HubDevice (Port 1 of Hub at 0x1a000000) may have caused a wake by issuing a remote wakeup (2) 10/16/13 1:36:06.000 PM kernel[0]: [ALXEthernet] Powering ethernet on. 10/16/13 1:36:06.000 PM kernel[0]: [ALXEthernet] PCI register PMC = 0xf9c3 10/16/13 1:36:06.000 PM kernel[0]: [ALXEthernet] PME# from D3cold state is supported. 10/16/13 1:36:06.000 PM kernel[0]: [ALXEthernet] ALX_wake() 10/16/13 1:36:06.000 PM kernel[0]: [ALXEthernet] Wake on magic packet disabled. 10/16/13 1:36:06.000 PM kernel[0]: [ALXEthernet] Enabling multicast mode. 10/16/13 1:36:06.033 PM configd[18]: setting hostname to "iMac.local" 10/16/13 1:36:06.035 PM configd[18]: network changed: v4(en1-:192.168.1.3) DNS- Proxy- 10/16/13 1:36:06.037 PM netbiosd[361]: network_reachability_changed : network is not reachable, netbiosd is shutting down 10/16/13 1:36:06.000 PM kernel[0]: The USB device 4-Port USB 3.0 Hub (Port 4 of Hub at 0x15000000) may have caused a wake by issuing a remote wakeup (1) 10/16/13 1:36:06.000 PM kernel[0]: The USB device USB2.0 Hub (Port 1 of Hub at 0x1a100000) may have caused a wake by issuing a remote wakeup (3) 10/16/13 1:36:06.000 PM kernel[0]: The USB device USB Receiver (Port 3 of Hub at 0x1a110000) may have caused a wake by issuing a remote wakeup (3) 10/16/13 1:36:06.139 PM WindowServer[131]: CGXDisplayDidWakeNotification [106742586690]: posting kCGSDisplayDidWake 10/16/13 1:36:06.140 PM WindowServer[131]: handle_will_sleep_auth_and_shield_windows: NULL shield_window (lock state: 1) 10/16/13 1:36:07.086 PM racoon[369]: ioctl(SIOCGIFAFLAG_IN6) failed:Can't assign requested address 10/16/13 1:36:08.000 PM kernel[0]: [ALXEthernet] Link event interrupt. 10/16/13 1:36:08.000 PM kernel[0]: [ALXEthernet] NIC link is up: 1000Mb/s Full Duplex. 10/16/13 1:36:08.848 PM configd[18]: network changed: v4(en1+:192.168.1.3) DNS+ Proxy+ SMB 10/16/13 1:36:08.860 PM configd[18]: setting hostname to "imac" 10/16/13 1:36:09.000 PM kernel[0]: AppleIntelE1000e(Info): e1000e NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx kernel[0]: Fixing incorrect zfree from zone kalloc.16 to zone kalloc.32 cos of this kext... test it only with AppleIntelE1000e and I did not have this spam in logs... only with ALXEthernet can you please look at this problem... Same here: lots of ... 06.11.13 2:47:39,000 kernel[0]: Fixing incorrect zfree from zone kalloc.16 to zone kalloc.32 ... but it only appears when the Messages starts, then network stops working, have to reboot. My system: GA-Z77-DS3H rev. 1.1, Intel Core i7-3770K, Voodoohda 2.8.4, GTX 650 Ti 2Gb, 32 Gb, OS X 10.9 (13A603), Chimera 2.2.1 Link to comment Share on other sites More sharing options...
jl4c Posted November 19, 2013 Share Posted November 19, 2013 Is there any chance to build this driver for 10.9? Link to comment Share on other sites More sharing options...
xanderon Posted January 1, 2014 Share Posted January 1, 2014 hi Shailua, happy new year first of all. here is a desired kernel panic to figure out whats happening. my system: mavericks 10.9.1 clover boot 2428 ALXEthernet.kext 1.0.2 FakeSMC.kext 6.0.1057 happens when i move large files in the network like 7,4GB please have a look and u can use me as a beta tester for a new version. thanks in advance Link to comment Share on other sites More sharing options...
selnes Posted January 2, 2014 Share Posted January 2, 2014 Hello Shailua and thank you for your work!The kext "ALXEthernet-1.0.2" works on OSx86 10.9 (Mavericks)System based on Z77-DS3H with Intel I3-3225 3.3GHz. (HD4000)Qualcomm Atheros AR8161 Gigabit Ethernet Link to comment Share on other sites More sharing options...
xanderon Posted January 2, 2014 Share Posted January 2, 2014 its works but it kernel panics when you copy a huge file. already tried? 1 Link to comment Share on other sites More sharing options...
jl4c Posted January 3, 2014 Share Posted January 3, 2014 hi Shailua, happy new year first of all. here is a desired kernel panic to figure out whats happening. my system: mavericks 10.9.1 clover boot 2428 ALXEthernet.kext 1.0.2 FakeSMC.kext 6.0.1057 happens when i move large files in the network like 7,4GB please have a look and u can use me as a beta tester for a new version. thanks in advance Yes, same issue here on AR8162. 1 Link to comment Share on other sites More sharing options...
petrucci78 Posted January 10, 2014 Share Posted January 10, 2014 Hello, i have motherboard gigabyte ga z77x-d3h with AR8161 In Mac os mavericks 10.9, when transfer large file in the network i have kp...now i have kext 1.0.2 there is version full work for Mavericks??Can you help me??Thanks Link to comment Share on other sites More sharing options...
infinus Posted January 10, 2014 Share Posted January 10, 2014 Seriously, why has nobody figured out a fix for this? It's been months upon months. 1 Link to comment Share on other sites More sharing options...
Mikhail Opekunov Posted January 12, 2014 Share Posted January 12, 2014 Hello, i have motherboard gigabyte ga z77x-d3h with AR8161 In Mac os mavericks 10.9, when transfer large file in the network i have kp...now i have kext 1.0.2 there is version full work for Mavericks?? Can you help me?? Thanks Try it this. I have to work z77x-d3hALXEthernet.kext.zip Link to comment Share on other sites More sharing options...
petrucci78 Posted January 13, 2014 Share Posted January 13, 2014 Hello Mikhail , thank you very much for the file, i have tried but when copy large 7 gb file in my server the system freeze(don't see a kernel panic but i think it's), when copy in another server or small file don't freeze... When load S.O. Windows 7 the copy is all ok... Your Kext is different but same error.. 1 Link to comment Share on other sites More sharing options...
jl4c Posted January 13, 2014 Share Posted January 13, 2014 Hello Mikhail , thank you very much for the file, i have tried but when copy large 7 gb file in my server the system freeze(don't see a kernel panic but i think it's), when copy in another server or small file don't freeze... When load S.O. Windows 7 the copy is all ok... Your Kext is different but same error.. +1 1 Link to comment Share on other sites More sharing options...
sot_22 Posted January 21, 2014 Share Posted January 21, 2014 Thanks a lot Shailua! kext works perfect with my connection 8mb/down - 1mb/up (i tried regular net browsing / downloading etc..) ALXEthernet-1.0.2.zip Mavericks 10.9.1 Motherboard : Asrock B85M-ITX LAN : Qualcomm Atheros AR8171 the newer chipset code seems to work very well and it will be nice if it gets updated to be more complete and in par with linux version , anyway thank you, without this i would be stuck now without lan cause mini-itx motherboards dont have much upgradability Link to comment Share on other sites More sharing options...
tempbeta Posted February 5, 2014 Share Posted February 5, 2014 I have tried the ALXEthernet.kext then when boot -v the log says:[ALXEthernet] Error:HW is disabled.[ALXEthernet] Error:unable to initialise ALX adapter structure.[ALXEthernet] Error:unable to initialise adapter. Any help? Link to comment Share on other sites More sharing options...
KibosJB Posted February 9, 2014 Share Posted February 9, 2014 I had to use this Kext to get my Ethernet working and, like others, I have had stability issues with it. It's strange, because it doesn't happen all of the time. I downloaded a torrent the other day and it made about 200 connections (Kernel Panic) I rebooted, loaded the same torrent (from the beginning) and it carried on through the whole torrent without a blip. Steam also causes it to panic sometimes too. It only seems to happen when the connection is under load. I have 80Mbps Down and 20Mbps up. I hope someone manages to get the Atheros chips working better. Link to comment Share on other sites More sharing options...
rotoyouoio Posted February 10, 2014 Share Posted February 10, 2014 I had to use this Kext to get my Ethernet working and, like others, I have had stability issues with it. It's strange, because it doesn't happen all of the time. I downloaded a torrent the other day and it made about 200 connections (Kernel Panic) I rebooted, loaded the same torrent (from the beginning) and it carried on through the whole torrent without a blip. Steam also causes it to panic sometimes too. It only seems to happen when the connection is under load. I have 80Mbps Down and 20Mbps up. I hope someone manages to get the Atheros chips working better. The kext posted by Mikhail Opekunov is my finding posted on a russian most popular apple/hackintosh forum (where the famous slice dwelves). It was recompiled by xpamamadeus (or smth like that). It does not have KP, but it has another problem: when you transfer ~7 gb at maximum speed on a local network - the computer reboots instantly (not showing a KP). So if you need extensive lan usage (maybe these restart conditions are more broad) - then it's unusable. I've tested it by connecting my macbook directly and transferrig a 15GB movie. Mikhail Opekunov doesn't have any problems whatsoever, so maybe this kext will suit you also. Anyway it's better than the one in the first post. Here's the original link: https://www.dropbox.com/s/p5dhz2bpvf31qfn/ALXEthernet.kext.zip Maybe someone could poke xpamamadeus to investigate this issue, but i doubt he will, since he has the 8151 chip. Link to comment Share on other sites More sharing options...
Allan Posted February 12, 2014 Share Posted February 12, 2014 the kext ALXEthernet, don't load in Clover UEFI mode, only in Legacy mode. look: how can I fix this? Link to comment Share on other sites More sharing options...
KibosJB Posted February 12, 2014 Share Posted February 12, 2014 the kext ALXEthernet, don't load in Clover UEFI mode, only in Legacy mode. look: Screen Shot 2014-02-03 at 9.32.08 PM.png how can I fix this? Loads fine for me in Clover, using UEFI. Link to comment Share on other sites More sharing options...
Allan Posted February 12, 2014 Share Posted February 12, 2014 you use patch for LAN in your DSDT? Link to comment Share on other sites More sharing options...
KibosJB Posted February 12, 2014 Share Posted February 12, 2014 you use patch for LAN in your DSDT? Nope, in your UEFI settings under OS Type make sure "Network Stack" is disabled (stupid I know), but that makes it work for me Link to comment Share on other sites More sharing options...
Allan Posted February 12, 2014 Share Posted February 12, 2014 don't work for me. in my BiOS i don't have this option. Link to comment Share on other sites More sharing options...
KibosJB Posted February 12, 2014 Share Posted February 12, 2014 Then I can't help I'm afraid, that is the only way i could get that to work :/ Link to comment Share on other sites More sharing options...
Allan Posted February 12, 2014 Share Posted February 12, 2014 Then I can't help I'm afraid, that is the only way i could get that to work :/ thanks man for your time!! Link to comment Share on other sites More sharing options...
Svetoslav D Posted February 24, 2014 Share Posted February 24, 2014 Guys, any solution yet? I am still stuck on that freezing. Link to comment Share on other sites More sharing options...
infinus Posted February 24, 2014 Share Posted February 24, 2014 Unfortunately it doesn't look like anyone cares enough to actually solve this. I've switched out my motherboard for one with a Realtek card. Using the problem board in a Linux server instead. Good luck all. Link to comment Share on other sites More sharing options...
Svetoslav D Posted February 26, 2014 Share Posted February 26, 2014 I had managed to make it work and copy files over the local network without freezing. The problem appeared again after updating the FakeSMC, because I was missing the sensors data in HW monitor. So I believe there must be relation between the FakeSMC and the ALX kext. Link to comment Share on other sites More sharing options...
Recommended Posts