~pcwiz Posted July 19, 2008 Share Posted July 19, 2008 The Introduction This is my last project that I'll be doing on InsanelyMac and its also probably the best. I've constructed a system where the application uses device ID based detection to automatically download and install the correct drivers for your hardware from an online driver database. I already have a working beta, so if anyone wants to beta test, contact me. Beta testers must have at least 2 devices from the list of supported devices in the Xlabs thread (link at bottom) This system will eventually be integrated into OSx86 Tools once I reach a stable working system. For example, this is what the program detected on my hardware (Gigabyte GA-P35-DS3P with NVIDIA GeForce 7900 GS). Note that your hardware still has to be OSX86 Supported, it won't make old unsupported hardware work like magic : As you can see, everything above has been detected correctly, shows the hardware name, type, and download URL for the drivers. All the driver information, including hardware names, device IDs, and download URLs are contained inside a single XML file. I decided to go with XML rather than a PLIST because XML is much more flexible for these operations. How it works The program uses device ID based detection to detect your hardware. To get a list of device IDs, it uses the Mac OS X port of the LSPCI command. It takes the device ID list and repeatedly matches each device ID against the device ID list in the XML file. Once it finds a match in the XML file it parses the XML and grabs the info for the file, type, name, download etc. This info is stored in variables and then eventually outputed into a table as you see from the screenshot above. Then its the basic stuff from then, the program takes the download URL, downloads the zip, unzips it and copies the contents to the Extensions folder, and then sets permissions. When will it be here? The code base for the app is done, I am already giving out beta copies for people to test! What can I do to help? The obvious thing right now you can do to help is follow these instructions to submit some device info about your hardware to me, and what drivers you used and how you patched. This not only benefits me in terms of adding all this stuff, but it benefits you because if you submit, chances are that it will be supported in the app and you can use it. More information can be found in the X Labs thread here Link to comment https://www.insanelymac.com/forum/topic/116638-make-your-hardware-work-in-1-click/ Share on other sites More sharing options...
taladro Posted July 19, 2008 Share Posted July 19, 2008 wow!!! for dumbheads like me this sound as pure genius! go for it! Link to comment https://www.insanelymac.com/forum/topic/116638-make-your-hardware-work-in-1-click/#findComment-825775 Share on other sites More sharing options...
Synaesthesia Posted July 19, 2008 Share Posted July 19, 2008 Wow! Nice way to go out. Link to comment https://www.insanelymac.com/forum/topic/116638-make-your-hardware-work-in-1-click/#findComment-825784 Share on other sites More sharing options...
FrankOS_Scripting Posted July 19, 2008 Share Posted July 19, 2008 ~Pcwiz is whitout any contradictions, the master of OSx86. Thanks for this great release and hope one time, I will be "hot" like you. I can dream for a while hahah Link to comment https://www.insanelymac.com/forum/topic/116638-make-your-hardware-work-in-1-click/#findComment-825788 Share on other sites More sharing options...
~pcwiz Posted July 20, 2008 Author Share Posted July 20, 2008 Huge advancement here. Here is a quick screenshot of the basic interface: The app is basically done. All I need to do is add more devices. Who wants to beta test? Beta testers should have at least 2 supported devices from the list in the first post of the Xlabs thread to test. The most compatible hardware ATM is the Gigabyte P35-DS3P/DS3R/DS4 series and any other motherboards that have identical hardware to that of those motherboards. Link to comment https://www.insanelymac.com/forum/topic/116638-make-your-hardware-work-in-1-click/#findComment-825993 Share on other sites More sharing options...
derekreid Posted July 20, 2008 Share Posted July 20, 2008 Man, this would be epic. Great work pcwiz. Link to comment https://www.insanelymac.com/forum/topic/116638-make-your-hardware-work-in-1-click/#findComment-826004 Share on other sites More sharing options...
resonance Posted July 20, 2008 Share Posted July 20, 2008 This will be a great addition to a great tool from a great person! Look forward to it's completion. Thanks Link to comment https://www.insanelymac.com/forum/topic/116638-make-your-hardware-work-in-1-click/#findComment-826127 Share on other sites More sharing options...
~pcwiz Posted July 20, 2008 Author Share Posted July 20, 2008 Well actually, its completed. I've tested it on my own system and it works great, one click works all All I need now is the input of all the end users so that I can add more support for devices! Remember, its for your own advantage if you submit info If your OSx86 drivers get overwritten by an update, all you have to do is click one "Download & Install" button and that's it Link to comment https://www.insanelymac.com/forum/topic/116638-make-your-hardware-work-in-1-click/#findComment-826129 Share on other sites More sharing options...
U.C. Posted July 20, 2008 Share Posted July 20, 2008 Woah pcwiz, that is the holy grail of OSX86. Congratulations. Link to comment https://www.insanelymac.com/forum/topic/116638-make-your-hardware-work-in-1-click/#findComment-826147 Share on other sites More sharing options...
xtrgt Posted July 20, 2008 Share Posted July 20, 2008 will send you a pm.. Link to comment https://www.insanelymac.com/forum/topic/116638-make-your-hardware-work-in-1-click/#findComment-826266 Share on other sites More sharing options...
Running With Scissors Posted July 20, 2008 Share Posted July 20, 2008 Thanks mate this looks epic. Will put a list of my hardware/kexts together later. Link to comment https://www.insanelymac.com/forum/topic/116638-make-your-hardware-work-in-1-click/#findComment-826304 Share on other sites More sharing options...
FavleX Posted July 20, 2008 Share Posted July 20, 2008 @pcwiz U r The Man. Definetely Link to comment https://www.insanelymac.com/forum/topic/116638-make-your-hardware-work-in-1-click/#findComment-826376 Share on other sites More sharing options...
anibalin Posted July 20, 2008 Share Posted July 20, 2008 amazing work mate. Link to comment https://www.insanelymac.com/forum/topic/116638-make-your-hardware-work-in-1-click/#findComment-826474 Share on other sites More sharing options...
GingerTea Posted July 20, 2008 Share Posted July 20, 2008 Excellent, as usual. Thanks PCWiz. Now collaborate with diabolik and ask him whether you could use his shiny domain osx86.me as vhost for the online driver database! :-D Link to comment https://www.insanelymac.com/forum/topic/116638-make-your-hardware-work-in-1-click/#findComment-826486 Share on other sites More sharing options...
~pcwiz Posted July 20, 2008 Author Share Posted July 20, 2008 Excellent, as usual. Thanks PCWiz. Now collaborate with diabolik and ask him whether you could use his shiny domain osx86.me as vhost for the online driver database! :-D Yeah, I'll ask him about that Right now the drivers are hosted on a free host with 5GB storage and Unlimited bandwith, so ATM its ok. Link to comment https://www.insanelymac.com/forum/topic/116638-make-your-hardware-work-in-1-click/#findComment-826769 Share on other sites More sharing options...
Jonty! Posted July 20, 2008 Share Posted July 20, 2008 PCWiz, excellent work as usual I own a webhosting company if you want like 20GB Free space and unlimited BW on a reliable server if you want for free cause your sooooo good Oh btw, in one of ur posts i see u said you can beta test if you have two of those above items. I have 3 of those items so could I beta test this for you please? Thanks Jonty PS. Can you help me with my gfx card. Its my built in display that isnt been recognised as it works on externel display. GFX card is Intel GM965 Intel GMA X3100. Its a Toshiba Equium L350 Laptop. Cheers! Link to comment https://www.insanelymac.com/forum/topic/116638-make-your-hardware-work-in-1-click/#findComment-826930 Share on other sites More sharing options...
~pcwiz Posted July 20, 2008 Author Share Posted July 20, 2008 Sent you PM with testing link. For X3100 read this thread and see if anything works: http://forum.insanelymac.com/index.php?showtopic=71784 Link to comment https://www.insanelymac.com/forum/topic/116638-make-your-hardware-work-in-1-click/#findComment-826943 Share on other sites More sharing options...
drumthrasher109 Posted July 20, 2008 Share Posted July 20, 2008 I'll be more than happy to test it out. Note: .co.nr sucks, there are MUCH better free domains, like http://uni.cc or http://co.cc ; both support DNS if needed and are all for free. EDIT: I noticed that (a) my 2600PRO isn't on the list and ( my ALC880 audio codec isn't on their either...I mean I can get those 2 working in a few seconds by installing the kext files with kext helper...but yeah. Link to comment https://www.insanelymac.com/forum/topic/116638-make-your-hardware-work-in-1-click/#findComment-827161 Share on other sites More sharing options...
quinielascom Posted July 21, 2008 Share Posted July 21, 2008 hey, thanks for your work Here are my test results: GA-945GCMX-S2, EN8600GT lspci: 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) 00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port (rev 02) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 01:00.0 VGA compatible controller: nVidia Corporation Unknown device 0402 (rev a1) 02:01.0 FireWire (IEEE 1394): Texas Instruments FireWire Controller (rev 01) 02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10) Remarks: Audio, I used ALC888 codec package USB, Works native without patch Drivers: http://www.mediafire.com/?yg1txkju0ww Acer Aspire 4320 lspci: 00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile Integrated Graphics Controller (rev 03) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3) 00:1f.0 ISA bridge: Intel Corporation Mobile LPC Interface Controller (rev 03) 00:1f.1 IDE interface: Intel Corporation Mobile IDE Controller (rev 03) 00:1f.2 IDE interface: Intel Corporation Mobile SATA IDE Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03) 01:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02) 04:00.0 Network controller: Broadcom Corporation BCM94311MCG wlan mini-PCI (rev 01) 0a:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 0a:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 0a:09.2 System peripheral: Ricoh Co Ltd Unknown device 0843 (rev 12) 0a:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) 0a:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12) Drivers: http://www.mediafire.com/?myaceyteihj Link to comment https://www.insanelymac.com/forum/topic/116638-make-your-hardware-work-in-1-click/#findComment-827233 Share on other sites More sharing options...
~pcwiz Posted July 21, 2008 Author Share Posted July 21, 2008 hey, thanks for your work Here are my test results: GA-945GCMX-S2, EN8600GT lspci: 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) 00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port (rev 02) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 01:00.0 VGA compatible controller: nVidia Corporation Unknown device 0402 (rev a1) 02:01.0 FireWire (IEEE 1394): Texas Instruments FireWire Controller (rev 01) 02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10) Remarks: Audio, I used ALC888 codec package USB, Works native without patch Acer Aspire 4320 lspci: 00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile Integrated Graphics Controller (rev 03) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3) 00:1f.0 ISA bridge: Intel Corporation Mobile LPC Interface Controller (rev 03) 00:1f.1 IDE interface: Intel Corporation Mobile IDE Controller (rev 03) 00:1f.2 IDE interface: Intel Corporation Mobile SATA IDE Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03) 01:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02) 04:00.0 Network controller: Broadcom Corporation BCM94311MCG wlan mini-PCI (rev 01) 0a:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 0a:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 0a:09.2 System peripheral: Ricoh Co Ltd Unknown device 0843 (rev 12) 0a:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) 0a:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12) Drivers: http://www.mediafire.com/?myaceyteihj Thanks. The audio is actually ALC883 codec, not ALC888 I will add the laptop drivers to the app, what driver did you use for your 8600GT? I can add that too. Can you give me the output of "lspci -nn" too please? The above output doesn't have the device IDs Link to comment https://www.insanelymac.com/forum/topic/116638-make-your-hardware-work-in-1-click/#findComment-827259 Share on other sites More sharing options...
quinielascom Posted July 21, 2008 Share Posted July 21, 2008 Acer 4320: 00:00.0 Host bridge [0600]: Intel Corporation Mobile Memory Controller Hub [8086:2a00] (rev 03) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile Integrated Graphics Controller [8086:2a02] (rev 03) 00:02.1 Display controller [0380]: Intel Corporation Mobile Integrated Graphics Controller [8086:2a03] (rev 03) 00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 [8086:2834] (rev 03) 00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03) 00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03) 00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03) 00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 03) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03) 00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) 00:1f.0 ISA bridge [0601]: Intel Corporation Mobile LPC Interface Controller [8086:2815] (rev 03) 00:1f.1 IDE interface [0101]: Intel Corporation Mobile IDE Controller [8086:2850] (rev 03) 00:1f.2 IDE interface [0101]: Intel Corporation Mobile SATA IDE Controller [8086:2828] (rev 03) 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03) 01:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express [14e4:1693] (rev 02) 04:00.0 Network controller [0280]: Broadcom Corporation BCM94311MCG wlan mini-PCI [14e4:4311] (rev 01) 0a:09.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 05) 0a:09.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22) 0a:09.2 System peripheral [0880]: Ricoh Co Ltd Unknown device [1180:0843] (rev 12) 0a:09.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 12) 0a:09.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 12) GA-945GCMX-S2: 00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub [8086:2770] (rev 02) 00:01.0 PCI bridge [0604]: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port [8086:2771] (rev 02) 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 01) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 01) 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 01) 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 01) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01) 00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller [8086:27c0] (rev 01) 00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01) 01:00.0 VGA compatible controller [0300]: nVidia Corporation Unknown device [10de:0402] (rev a1) 02:01.0 FireWire (IEEE 1394) [0c00]: Texas Instruments FireWire Controller [104c:8009] (rev 01) 02:05.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet [10ec:8167] (rev 10) The audio is actually ALC883 codec, not ALC888: Yes but ALC888 package works fine for me (all inputs/outputs). Regards. Link to comment https://www.insanelymac.com/forum/topic/116638-make-your-hardware-work-in-1-click/#findComment-827280 Share on other sites More sharing options...
quinielascom Posted July 21, 2008 Share Posted July 21, 2008 Thanks. The audio is actually ALC883 codec, not ALC888 I will add the laptop drivers to the app, what driver did you use for your 8600GT? I can add that too. Can you give me the output of "lspci -nn" too please? The above output doesn't have the device IDs What do you think about this ? Audio device is ALC883 but Mixer says Realtek ALC888 and this works with ALC888 package installer, its no clear for me. Link to comment https://www.insanelymac.com/forum/topic/116638-make-your-hardware-work-in-1-click/#findComment-827335 Share on other sites More sharing options...
hecker Posted July 21, 2008 Share Posted July 21, 2008 Man, it sounds like a great app. Thanks, pcwiz~! Link to comment https://www.insanelymac.com/forum/topic/116638-make-your-hardware-work-in-1-click/#findComment-827826 Share on other sites More sharing options...
drumthrasher109 Posted July 21, 2008 Share Posted July 21, 2008 Attached is a ZIP file containing my 2 drivers I needed for Leopard: + forcedeth_nockd.zip >>> forcedeth_nockd.kext + ALC880.zip >>> ALCinject.kext >>> AppleHDA.kext As for my 2600pro, I've tried every driver out there and it just doesn't want to work. But what I'm gonna try out next is, unplug everything but my monitor, KB, mouse, and sound, and see if it will work. Link to comment https://www.insanelymac.com/forum/topic/116638-make-your-hardware-work-in-1-click/#findComment-828327 Share on other sites More sharing options...
~pcwiz Posted July 21, 2008 Author Share Posted July 21, 2008 I also need the output of "lspci -nnv" on your computer Link to comment https://www.insanelymac.com/forum/topic/116638-make-your-hardware-work-in-1-click/#findComment-828342 Share on other sites More sharing options...
Recommended Posts