47 replies to this topic

[Frank_t]

I did the SecUpd2008-002 update and now only have a blue screen on startup :-(

I have a Dell Latitude D600 with Kalyway 10.5.2...is there a command i can run to get back to my desktop?

[Colonel]

Anyone make a hacked version of 9.2.2 yet that'll work with old Pentium 4/Celeron D boxes yet?

[nate256]

I just updated like it was a real Mac!!!
I was praying during the reboot though!

[pakaya]

Phew!!!!!

Booted up ok after updating including sec/time machine fix.

[IntelMacGuy2008]

Motherboard: Intel D946GZIS
Processor: Intel Core2Duo 4300 1.8Ghz
Graphics Card: ATI HD 2600 PRO 512MB
RAM: 1GB DDR2
Kernel Version:  Darwin 9.1.0
Boot: Normal (MBR)

I used Kalyway's 10.5.1 DVD and didn't check the original vanilla Kernel options. The only things I checked in the install was NATIT_ATI Driver and the MBR option. I haven't installed the kalyway kernel update and wasn't sure if I should. I just started using mac recently because I got pretty much tired of microsoft's BS so I'm not really sure about somethings about updates and kernels. Well anyway I'm not sure if I should go ahead by installing the kernel update and the mac updates. Is my setup ready for this? Thank you for your help.

[burton3660]

this is a major bump but does anyone know if i can update 10.5.1 to 10.5.2 on a kalaway install?

[Foodie Monster]

burton3660, on May 4 2008, 03:29 PM, said:

this is a major bump but does anyone know if i can update 10.5.1 to 10.5.2 on a kalaway install?

There was a patch that went from 10.5.1 to 10.5.2 specifically designed by Kaly. It was pretty painless, as far as I remember, it's what I'm running at the moment. I think you can find it at The Bay. Hope that helps.

[noctrl]

As of yesterday every patch worked fine for me.

 moded image: Kalyway 10.5.2
		  partitioning: mbr && hfs+ && hfsx

$ hostinfo
		  Mach kernel version:
		  Darwin Kernel Version 9.2.0: Sun Mar  2 00:11:08 SCT 2008; made by ToH:xnu-1228/BUILD/obj/RELEASE_I386
		  Kernel configured for up to 2 processors.
		  2 processors are physically available.
		  2 processors are logically available.
		  Processor type: i486 (Intel 80486)
		  Processors active: 0 1
		  Primary memory available: 8.00 gigabytes
		  Default processor set: 62 tasks, 240 threads, 2 processors
		  Load average: 0.00, Mach factor: 1.99

$ lspci -nn
		  00:00.0 Host bridge [Class 0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02)
		  00:01.0 PCI bridge [Class 0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02)
		  00:1a.0 USB Controller [Class 0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02)
		  00:1a.1 USB Controller [Class 0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02)
		  00:1a.2 USB Controller [Class 0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02)
		  00:1a.7 USB Controller [Class 0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02)
		  00:1b.0 Audio device [Class 0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02)
		  00:1c.0 PCI bridge [Class 0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02)
		  00:1c.4 PCI bridge [Class 0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02)
		  00:1c.5 PCI bridge [Class 0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 02)
		  00:1d.0 USB Controller [Class 0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02)
		  00:1d.1 USB Controller [Class 0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02)
		  00:1d.2 USB Controller [Class 0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02)
		  00:1d.7 USB Controller [Class 0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02)
		  00:1e.0 PCI bridge [Class 0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92)
		  00:1f.0 ISA bridge [Class 0601]: Intel Corporation 82801IB (ICH9) LPC Interface Controller [8086:2918] (rev 02)
		  00:1f.2 IDE interface [Class 0101]: Intel Corporation 82801IB (ICH9) 2 port SATA IDE Controller [8086:2921] (rev 02)
		  00:1f.3 SMBus [Class 0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02)
		  00:1f.5 IDE interface [Class 0101]: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller [8086:2926] (rev 02)
		  01:00.0 VGA compatible controller [Class 0300]: nVidia Corporation GeForce 8600 GT [10de:0402] (rev a1)
		  02:00.0 Ethernet controller [Class 0200]: Attansic Technology Corp. L1 Gigabit Ethernet Adapter [1969:1048] (rev b0)
		  03:00.0 SATA controller [Class 0106]: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller [197b:2363] (rev 03)
		  03:00.1 IDE interface [Class 0101]: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller [197b:2363] (rev 03)
		  05:03.0 FireWire (IEEE 1394) [Class 0c00]: VIA Technologies, Inc. IEEE 1394 Host Controller [1106:3044] (rev c0)

$ lsusb
		  Bus 008 Device 001: ID 0000:0000  
		  Bus 007 Device 001: ID 0000:0000  
		  Bus 006 Device 001: ID 0000:0000  
		  Bus 003 Device 001: ID 0000:0000  
		  Bus 002 Device 003: ID 04a9:220d Canon, Inc. CanoScan N670U/N676U/LiDE 20
		  Bus 002 Device 002: ID 046d:08da Logitech, Inc. QuickCam Messanger
		  Bus 002 Device 001: ID 0000:0000  
		  Bus 001 Device 004: ID 04fc:05d8 Sunplus Technology Co., Ltd 
		  Bus 001 Device 001: ID 0000:0000  
		  Bus 005 Device 001: ID 0000:0000  
		  Bus 004 Device 003: ID 0dda:2005 Integrated Circuit Solution, Inc. 
		  Bus 004 Device 001: ID 0000:0000

Sorry for 'just' Linux' output but I haven't 'sed'ed" yet neither 'ioreg -bls' nor 'system_profiler' outputs.

For patching I was using: "OliU (c't Offline-Update für Mac OS X) 1.5"
Afaik there is no general public release of it yet but c't provided it on a "mac special". http://www.heise.de/...ecial/ct/08/03/

The former one for 10.4 can be found here: http://www.heise.de/...os_x_10.4/43654
Afaik both are german only.

Nevertheless the proggy is quite easy. I've just choosen the release # and the for me appropriate plattform then hit "make an image".
It wget's all patches from the apple.server (atm 'bout 3GB for intel^10.5) and makes a dmg image of it.
Then one can decide what patch is gonna be applied and which one ain't.
All current patches, as of yesterday, worked for me on the above mentioned hardware setup.
If you like this info then great. If not, then feel free to > /dev/null

Thx