428 replies to this topic

[jsl]

RaFaeL_Rj, on Jul 13 2008, 04:06 AM, said:

Where can I get the driver to make my GMA965 X3100 work properly?
Thanks in advance!

Please refer to these links of jsl :
http://forum.insanel...o...69826&st=40
http://forum.insanel...o...9826&st=140

[ariethekid]

Ok well I have the x3100 graphics card working with QE/CI on my Fujitsu T4220 SXGA+ tablet.  One little issue I have noticed is that OSX crashes without fail when I try to switch to the native resolution.  ( 1400x1050 ) I have to use SwitchResX to create the 1400x1024 resolution and it works great except for the missing 26 pixel rows at the bottom of the screen.  Is this a driver limitation? I don't have any other monitors to test anything higher than 1440x900 on an external screen.  

PAULICAT!!!! if you're out there I need some help or maybe some advice.  

I tried using the EFI strings and I was able to get it to select the 1400x1050 without crashing however The screen was stretched out and distorted when I did that.  But I was able to get my current setup with EFI strings.  If anyone has a working EFI string with Res Change with supports resolutions higher than 1280x1024 that would be awesome.  Just give me the HEX and I'll add in my EDID into it. Thanks guys.  Good luck all.

Oh one more thing.  Has anyone gotten their x3100 to work with the newer 3100FB.kext, version 1.5.24? If seen alot of success wit 1.5.18 but I was hoping that maybe the newer version will fix my resolution issue.  And also has anyone gotten regular res change with stretching working? Couldn't figure that one out either.

[metalmaniac]

Hey, Toshiba m200 here, using NvidiaEFI.kext, and LaptopDisplay.kext.
Used mt EDID -
EDID BYTES:
0x   00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
    ------------------------------------------------
00 | 00 FF FF FF FF FF FF 00 51 F3 86 50 00 00 00 00
10 | 00 00 01 03 80 18 12 00 CA 00 00 00 00 00 00 00
20 | 00 00 00 00 00 00 90 40 01 01 01 01 01 01 01 01
30 | 01 01 01 01 01 01 30 2A 78 20 51 1A 10 40 30 70
40 | 13 00 F5 B8 00 00 00 18 00 00 00 FC 00 54 4F 53
50 | 48 49 42 41 20 49 6E 74 65 0A 00 00 00 FC 00 72
60 | 6E 61 6C 20 50 61 6E 65 6C 20 20 0A 00 00 00 FC
70 | 00 0A 00 00 00 00 00 00 00 00 00 00 00 00 00 A8


This is for a Nvidia Geforce go fx5200. 32 mb.
Used DisplayUtility to make the DisplayVendorID folder, and it moved it to Displays/Overrides/

Still no QE

Can anyone help me. Its only 32mb, but this is my output from sys profiler

NVIDIA GeForce FX Go5200 32M/64M:

  Chipset Model: NVIDIA GeForce FX Go5200 32M/64M
  Type: Display
  Bus: AGP
  VRAM (Total): 256 MB
  Vendor: NVIDIA (0x10de)
  Device ID: 0x0328
  Revision ID: 0x00a1
  Displays:
Display:
  Resolution: 1280 x 1024
  Depth: 32-bit Color
  Core Image: Software
  Main Display: Yes
  Mirror: Off
  Online: Yes
  Quartz Extreme: Not Supported
Display Connector:

Cheers

Ash

[CANADAS ARMY]

Sooooo. wait. where do i put these patches?
My HP laptop with a intel video card (NEVER AGAIN!) shows a blue screen after the loading screen, and i have to plug in a external monitor in order for it to work. what do i do, and how? please!!

[Blue1980]

Why do I get the feeling that this so called driver and relating thread is run by someone who's full of hot air and getting people excited over nothing? If it was a woman in a bar i'd call her a tease!  

[JSR]

tested on a  Sony Vaio VGN-FS285H, but doesn't work

I still get a white screen.

[Slice]

Hi, people!
The LaptopDisplay may work only with full set of video drivers! It is an addition but not a replacement of anyone.

[blackmonster]

Hi all.

I have a Sony Vaio Fz140N and my Graphics card is X3100 but I can't install it.

I try many thing but still have mess white screen.

I attached dump file and hope you can help me.

Thanks a lot.

Sorry for my poor English.

Attached Files

•  dump_x3100_fz140N_vaio.txt   78.05K   27 downloads

[Slice]

I check LaptopDisplay in different configurations and also tried to correct it.
It never works!

[r0987]

Wow...what's wrong with Natit?

[Volcacius]

Everyone here with monitor problems should try DSDT patch.http://forum.insanelymac.com/index.php?showtopic=133683

[Anonymous_]

Hi, where i can download it please? I want to try it on my IBM T40 and Dell D600
Thanks.

[bretle]

Any link where to download this kext ?????

Thx

[jvidor]

Great. I´ll try on my VGN C240E.

[iceboybatman]

Oh,thank you.I hope it should  work in my pc.

[OCM770]

Download link please? Original download link is down

[Slice]

No sense in download link.
The driver never works.

Moderators! Close the thread!

[pat-pat]

Even if the kext doesn't work I think we should keep a copy available,
This particular kext was offered including source code that could be a good source of information for fixing it or making a different one.

I'd appreciate if someone can re-send it.

thanks
patpat

[tarastalian]

Toshiba Satellite a200-1gb, with ATI mobility HD2600. Succesfully install ATIRadeonX2000.Kext, work perfect in external monitor, but i hace black screen in laptop. This is my EDID:

00FFFFFFFFFFFF00 320C00DC00000000
0010010380211578 0AB3409959538D27
2550540000000101 0101010101010101
010101010101BC1B 00A0502017303020
36004BCF10000019 0000000000000000
0000000000000000 0000000000FE004C
475068696C697073 4C43440A000000FE
004C503135345758 342D544C44320043
i've tried the DisplayUtility but it didn't work.

[hotmexican1983]

np_, on Jan 4 2007, 07:43 AM, said:

ok here is for test  LaptopDisplay.kext

it "should" work on any laptop nevermind what video card is

if work you should see class "LaptopPanelA" attached to "IOPanelDevice" in root device tree ( under IOACPIPlatformExpert )

also there should be IOBackLightDisplay class set for current display not "IODisplay" !

please test and report and do provide ioregs

thanks

compiled kext: LaptopDisplay.kext.zip
source code:     LaptopDisplay.zip

ps: ( read my notes in LaptopPanel.cpp for future hacking )

hi well now this is probably a question you have already got but i have been haveing problems enabeling me laptop display i have a vaio and it has an 8400 gt m and i got 10 .5 .7 on it its on untill i use nvinject than it just boots normal and banishes tight befor loging in and than it just goes black the lap can be used exept no pic and than i go and plug an external monitor to it and i have picture what can i do i hope you can give me some gidence. have a great day.