Jump to content

{Guide} DELL INSPIRON N5110


Mohamed Khairy
 Share

3,315 posts in this topic

Recommended Posts

Hi Mohamed, Appreciate all the work you've done. You mention making dsdt for all combinations in post #52. Where can I find them. My N5110 is i5-2430 with no discrete graphics and Intel Centrino wifi. Could I use the dsdt for your config. and comment out or delete the sections for nvidia and wifi? Or do you have other suggestions? I'm on A09 bios so that should be fine. TIA

Link to comment
Share on other sites

Hi all, regarding the subject SMC want to share my keys in the Info.plist withinFakeSMC.kext, which help to eliminate most of the standard errors on console, leaving only the famous and uncorrected "normal" (even on computers genuine) message that may be on purpose by testing ML:

 

kernel: SMC :: smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SCMmode (from the memory)

 

It is noteworthy that among the keys are some that improve the function of sleep, and leaving it records the correct information in console. I especially recommend their implementation in laptops. Of course it is understood that three (3) of which are specific for use with the profile (smbios.plist) MacBookPro8, 1:

 

Code:

 

 

<key>IOKitPersonalities</key>

<dict>

<key>SMC Device Emulator</key>

<dict>

<key>CFBundleIdentifier</key>

<string>org.netkas.FakeSMC</string>

<key>Configuration</key>

<dict>

<key>Keys</key>

<dict>

<key>$Adr</key>

<array>

<string>ui32</string>

<data>AAADAA==</data>

</array>

<key>$Num</key>

<array>

<string>ui8</string>

<data>AQ==</data>

</array>

<key>ACID</key>

<array>

<string>ch8*</string>

<data>ur48RcADEEM=</data>

</array>

<key>BEMB</key>

<array>

<string>flag</string>

<data>AQ==</data>

</array>

<key>CLKH</key>

<array>

<string>{clh</string>

<data>AABwgAABGUA=</data>

</array>

<key>CLKT</key>

<array>

<string>ui32</string>

<data>AAByGw==</data>

</array>

<key>CLWK</key>

<array>

<string>ui16</string>

<data>AHY=</data>

</array>

<key>DPLM</key>

<array>

<string>{lim</string>

<data>AAAAAA==</data>

</array>

<key>EPCI</key>

<array>

<string>flag</string>

<data>AQ==</data>

</array>

<key>FNum</key>

<array>

<string>ui8</string>

<data>AA==</data>

</array>

<key>LSOF</key>

<array>

<string>flag</string>

<data>AQ==</data>

</array>

<key>LSSB</key>

<array>

<string>{lso</string>

<data>AQE=</data>

</array>

<key>MOST</key>

<array>

<string>ui16</string>

<data>gAM=</data>

</array>

<key>MSDS</key>

<array>

<string>ui8</string>

<data>AA==</data>

</array>

<key>MSLD</key>

<array>

<string>ui8</string>

<data>AA==</data>

</array>

<key>MSPS</key>

<array>

<string>{msp</string>

<data>AA==</data>

</array>

<key>MSSD</key>

<array>

<string>si8</string>

<data>Aw==</data>

</array>

<key>MSSP</key>

<array>

<string>si8</string>

<data>AA==</data>

</array>

<key>MSTg</key>

<array>

<string>ui8</string>

<data>AA==</data>

</array>

<key>NATJ</key>

<array>

<string>ui8</string>

<data>AA==</data>

</array>

<key>NATi</key>

<array>

<string>ui16</string>

<data>MDAwMA==</data>

</array>

<key>NTOK</key>

<array>

<string>ui8</string>

<data>AQ==</data>

</array>

<key>NVPR</key>

<array>

<string>ui8</string>

<data>AA==</data>

</array>

<key>OSK0</key>

<array>

<string>ch8*</string>

<data>

b3VyaGFyZHdvcmtieXRoZXNld29y

ZHNndWFyZGVkcGw=

</data>

</array>

<key>OSK1</key>

<array>

<string>ch8*</string>

<data>

ZWFzZWRvbnRzdGVhbChjKUFwcGxl

Q29tcHV0ZXJJbmM=

</data>

</array>

<key>
REV
</key>

<array>

<string>{rev</string>

<data>AWgPAACY</data>

</array>

<key>
RPlt
</key>

<array>

<string>ch8*</string>

<data>azkwaQAAAAA=</data>

</array>

</dict>

<key>debug</key>

<true/>

<key>smc-compatible</key>

<string>
smc-huronriver
</string>

</dict>

<key>IOClass</key>

<string>FakeSMC</string>

 

Here is a glossary of terms and definitions (http://www.parhelia.ch/blog/statics/k3_keys.html) very good (something old but much good).

 

Greetings.

Link to comment
Share on other sites

Hi Guys

 

I followed this guide and forum post to by best knowledge.

 

I got a 8gb flash and followed the video to the letter.

 

Now when i boot 2 things happen:

 

If i boot normaly i get KP at AppleCPUPowerManagement.kext

I deleted/replaced the kext using the one in the extra folder.

- When i do the above it boots but the pc goes into Sleep right after DMOS has arrived (i can see the language selector for about 3 seconds)

- I cannot wake it up to continue installation

 

If i boot with -v -f i get Still waiting for root device

 

It's been 2 days and i don't know what to do.

 

(also tried deleting ati/nvidia kexts, or GraphicsEnabler=No, but no luck)

 

I did some digging and i think this might related to the Transcript Offline on IntelHD3000

 

Please help.

 

Thank you,

Adrian

Link to comment
Share on other sites

Hello, I would like to have your help please concerning how you did to enable Bluetooth without restarting from windows?

I have an ASUS P9X79 Deluxe http://www.asus.com/Motherboards/Intel_Socket_2011/P9X79_DELUXE/ and there is a built-in Atheros Bluetooth module on it. If I boot on Windows first and then restart my computer an boot on OS X, I'll have the Bluetooth working or even if I dont turn off power from my PSU, so the motherboard stays on stand-by mode and at any time I boot in OS X the Bluetooth module will work. My only problem is that if I turn whole power off meaning switching off power from PSU, when I will boot in OS X the Bluetooth module won't turn ON or some any reason OS X LION wont recognize it until I log on Windows 7 and restart to go back on OS X, then it will work.

If you could help me to sort out this problem that would be great.

 

Thanks

Hans.

  • Like 1
Link to comment
Share on other sites

Hello, I would like to have your help please concerning how you did to enable Bluetooth without restarting from windows? I have an ASUS P9X79 Deluxe http://www.asus.com/Motherboards/Intel_Socket_2011/P9X79_DELUXE/ and there is a built-in Atheros Bluetooth module on it. If I boot on Windows first and then restart my computer an boot on OS X, I'll have the Bluetooth working or even if I dont turn off power from my PSU, so the motherboard stays on stand-by mode and at any time I boot in OS X the Bluetooth module will work. My only problem is that if I turn whole power off meaning switching off power from PSU, when I will boot in OS X the Bluetooth module won't turn ON or some any reason OS X LION wont recognize it until I log on Windows 7 and restart to go back on OS X, then it will work. If you could help me to sort out this problem that would be great. Thanks Hans.

 

You should try the same kext we used with our laptop but changing the vendor and product ID with yours (get those from system profiler in mac after restarting from windows or even from device manager from windows itself)

 

I think it will work like that!

 

Hi Guys I followed this guide and forum post to by best knowledge. I got a 8gb flash and followed the video to the letter. Now when i boot 2 things happen: If i boot normaly i get KP at AppleCPUPowerManagement.kext I deleted/replaced the kext using the one in the extra folder. - When i do the above it boots but the pc goes into Sleep right after DMOS has arrived (i can see the language selector for about 3 seconds) - I cannot wake it up to continue installation If i boot with -v -f i get Still waiting for root device It's been 2 days and i don't know what to do. (also tried deleting ati/nvidia kexts, or GraphicsEnabler=No, but no luck) I did some digging and i think this might related to the Transcript Offline on IntelHD3000 Please help. Thank you, Adrian

 

Try "DropSSDT=Yes"

Link to comment
Share on other sites

  • 2 weeks later...

It appears that I swapped out my incompatible Intel mini-wireless-n/bluetooth card for another incompatible card (BCM943225XXX Wireless-n/Bluetooth combo)... grrrrrr

 

Anyone got a foolproof Airport Extreme compatible (no drivers needed) replacement mini-wifi card? It must be the mini-card (with two antennas). I am not interested in Bluetooth at all, and will not miss it, but if there is a compatible combo card, I will consider that. Must have 64bit support on OSX and Win7!

 

PS. I got the wireless working nicely under Win7 on my (now dualboot) system. The bluetooth may be more difficult.

Link to comment
Share on other sites

It appears that I swapped out my incompatible Intel mini-wireless-n/bluetooth card for another incompatible card (BCM943225XXX Wireless-n/Bluetooth combo)... grrrrrr

 

Anyone got a foolproof Airport Extreme compatible (no drivers needed) replacement mini-wifi card? It must be the mini-card (with two antennas). I am not interested in Bluetooth at all, and will not miss it, but if there is a compatible combo card, I will consider that. Must have 64bit support on OSX and Win7!

 

PS. I got the wireless working nicely under Win7 on my (now dualboot) system. The bluetooth may be more difficult.

 

I replace my Atheros ar9285 with Broadcom BCM 94322HM8L(a/b/g/n 2.4-5Ggz 300Mbit/s) and it work perfect with apple's native driver without any editing,but it does not have bluetooth

Im using USB Belkin Bluetooth F8T016NG(works native too)

Link to comment
Share on other sites

Native speedstep bios mod http://www.insanelym...howtopic=279576

 

good news

 

cant you edit latest bios version 10 un touched one

and add to it speedstep edit

 

and upload it to add it to guide

---------------------------------------------------------------------------------------------

 

 

again and again

iam not free till the end of september as i have exams and many works on house

so please no body PM me for help

what i will do on this duration

is to add updated kexts for Mountain lion finial when it release

 

thanks for all

Link to comment
Share on other sites

Small update

for Mountain lion DP4

 

first i use edited bios by Florin9doi as i dont have time to do it

 

 

now no more need for patched power managment kext

 

and here is patched applehda + patched framebuffer for via connector

also note that layout of applehda is 2 !!

 

DP4.zip

Link to comment
Share on other sites

thank you mohammed for this guide

and im install m.l with my

in

i7-8GB RAM-750HDD-intel 3000

with out any proplem

 

im face one proplem called in your guide

boot 0: error

 

you are say install ubuntu and write some commends in terminal

 

that is true

but the best "im do it " solve

before booting for install mac

download my hack

and install my hack utilities and select your drive

and restart,boot your flash install

in the install the installer will ask you about myhack

the first will ask you about extra file

my hack want copy extra file and ask you did you want your extra *in your usb* or myhack extra

select your extra and select the location to it !

the second will ask you about some kext meybe give kernel panic

will ask you did you want delete some kext

decline all !

than restart your *mac boot from usb*

 

the first delete extra in mac and boot file

 

and continue normally copy extra and install chameleon...etc

 

*meybe see

system timeup in nanoseconed:long number

 

the good solve for this problem

go to bios and disable speedstep from intel

and

boot with

-x*

 

 

and thank you mohammed *ابن بلدي*ةغ

 

my n5110 w/m.l

Screen%20Shot%202012-06-16%20at%205.15.24%20AM.png

Link to comment
Share on other sites

thank you mohammed for this guide

and im install m.l with my

in

i7-8GB RAM-750HDD-intel 3000

with out any proplem

 

im face one proplem called in your guide

boot 0: error

 

you are say install ubuntu and write some commends in terminal

 

that is true

but the best "im do it " solve

before booting for install mac

download my hack

and install my hack utilities and select your drive

and restart,boot your flash install

in the install the installer will ask you about myhack

the first will ask you about extra file

my hack want copy extra file and ask you did you want your extra *in your usb* or myhack extra

select your extra and select the location to it !

the second will ask you about some kext meybe give kernel panic

will ask you did you want delete some kext

decline all !

than restart your *mac boot from usb*

 

the first delete extra in mac and boot file

 

and continue normally copy extra and install chameleon...etc

 

*meybe see

system timeup in nanoseconed:long number

 

the good solve for this problem

go to bios and disable speedstep from intel

and

boot with

-x*

 

 

and thank you mohammed *ابن بلدي*ةغ

 

my n5110 w/m.l

Screen%20Shot%202012-06-16%20at%205.15.24%20AM.png

 

Got screen artifacts? (aka تخريف فى الشاشة)

Link to comment
Share on other sites

Got screen artifacts? (aka تخريف فى الشاشة)

the first time i'm try install M.L got screen artcasts

but in the second time i'm try install with myhack *my method*and dont got any problem with screen

and i'm try

DP4 got some screen artcasts and with first restart dont got anything *

ihave problems with all kext ! dont now why "i'm download the new kext and got the same problem dont have sound&battery"

Link to comment
Share on other sites

Hi

 

I did usb with that video. And post-installation, but the brightness almost dark. What should i do?

 

Had the same issue. At boot put in the flag "DSDT=<insert nonexistent filename here>" then once you're logged in delete the DSDT.aml file. I personally have one of the newer N5110s with a i3 2350M and the DSDT and SSDT supplied with this don't seem to be compatible.

  • Like 1
Link to comment
Share on other sites

Not sure it's even necessary, M.O.S. Only things I've found not to work so far are the HDMI port and Mirroring when using the VGA port(causes a restart). Using the VGA to extend the monitor works fine. Otherwise every other port seems to be working no problem. As well as all the software that I've tested thus far.

Link to comment
Share on other sites

 Share

×
×
  • Create New...