Jump to content

ULTIMATIVE wakeup the Lion from sleep topic


  • Please log in to reply
74 replies to this topic

#61
ovof

ovof

    InsanelyMac Geek

  • Members
  • PipPipPipPip
  • 239 posts
Same thing here, GA EP45C DS3R (wake NOK with power button, but OK with usb mouse)

A DSDT fix is needed i think, does anyone done it ?

#62
ovof

ovof

    InsanelyMac Geek

  • Members
  • PipPipPipPip
  • 239 posts
FIXED

i used an unknown applertc.kext,

i used genuine kext with the perl patch

sudo perl -pi -e 's|\x75\x30\x44\x89\xf8|\xeb\x30\x44\x89\xf8|; s|\x75\x3d\x8b\x75\x08|\xeb\x3d\x8b\x75\x08|' /System/Library/Extensions/AppleRTC.kext/Contents/MacOS/AppleRTC


Now wake works well with power button ;)

#63
alvinblank

alvinblank

    InsanelyMac Protégé

  • Members
  • PipPip
  • 66 posts
  • Gender:Male

chiming in on my ep35-ds3l with 10.7.1

power button sleeps. nothing shows in logs that i can see. it just sleeps.

wake on power button: getting "wake reason: ?" and if i click the mouse or keyboard (non-apple) it wakes with HID tickle, otherwise no screen, goes back to sleep, 'graphics suppressed' with time in log.

wake on key/mouse: "wake reason: UHC6" HID tickle is there, and all is well.

i had not noticed this before, as i usually go to menu -> sleep because tower button isn't convenient, and always wake with keyboard or mouse. interesting.


could I have your dsdt? Have the same mobo, am not sure is sleep is working as the fan is spinning. previously when miracle it work sleep stops the fan... what do you have in /E/E and boot.plist?

#64
ovof

ovof

    InsanelyMac Geek

  • Members
  • PipPipPipPip
  • 239 posts

FIXED

i used an unknown applertc.kext,

i used genuine kext with the perl patch

sudo perl -pi -e 's|\x75\x30\x44\x89\xf8|\xeb\x30\x44\x89\xf8|; s|\x75\x3d\x8b\x75\x08|\xeb\x3d\x8b\x75\x08|' /System/Library/Extensions/AppleRTC.kext/Contents/MacOS/AppleRTC


Now wake works well with power button ;)


Not working anymore ???!!!!!! why does it work yesterday using this tip ??? still seeking...

#65
badboyz

badboyz

    InsanelyMac Protégé

  • Members
  • PipPip
  • 51 posts
sleep works fine for me, Dell Inspiron 6400 with Intel core 2 duo and Nvidia 7300 GO, i used the 10.7.0 kext from kexts.com, and it works flawlessly only having issues with my screen going blank when i turn to wake up after the system turns it off due to inactivity, but once it sleeps and wakes back up, everything works without hiccup :rolleyes:

#66
Maniac10

Maniac10

    InsanelyMac Legend

  • Members
  • PipPipPipPipPipPipPipPip
  • 1,220 posts
  • Gender:Not Telling
After sleep speedstep won't work anymore, just the turbo states & the minimum multiplier (16-42-43-44-45). To wake the system I have to press several keys or mouse buttons. First key = fan & disks, next key(s) = monitor.

I can now see the "wake reason" because I added the DSM method inside EHC1 & 2:
Method (_DSM, 4, NotSerialized)
				{
					Store (Package (0x0B)
						{
							"AAPL,current-available", 
							0x0834, 
							"AAPL,current-extra", 
							0x0A8C, 
							"AAPL,current-extra-in-sleep", 
							0x0A8C, 
							"AAPL,max-port-current-in-sleep", 
							0x0834, 
							"AAPL,device-internal", 
							0x02, 
							Buffer (One)
							{
								0x00
							}
						}, Local0)
					DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
					Return (Local0)
				}

Besides that I've only patched AppleRTC, among many DSDT stuff but nothing out of the ordinary.

EDIT: almost forgot, another issue I have is that I have to replug the webcam after sleep, see below the "initDevice failed":

Before:
kernel[0]: Wake reason: ?
kernel[0]: Graphics suppressed 10468 ms
kernel[0]: HubDevice::terminate(kIOServiceSynchronous) timeout
kernel[0]: 0		0 AppleUSBCDC: start - initDevice failed

After:
kernel[0]: Wake reason: EHC1
kernel[0]: HID tickle 2755 ms
kernel[0]: HubDevice::terminate(kIOServiceSynchronous) timeout
kernel[0]: 0		0 AppleUSBCDC: start - initDevice failed


#67
mrwista

mrwista

    InsanelyMac Protégé

  • Members
  • Pip
  • 2 posts
any progress on this problem?

#68
nissefar

nissefar

    InsanelyMac Protégé

  • Members
  • PipPip
  • 73 posts
Seems dead in the water unless someone really skilled with DSDT/BIOS editing drops by.

Until then people should stop recommending Gigabyte boards for perfect MacOS compatibility.

I mean, not having the power button and WoL work is pretty far from compatibility in my book.

#69
toine44

toine44

    InsanelyMac Protégé

  • Members
  • PipPip
  • 52 posts

Seems dead in the water unless someone really skilled with DSDT/BIOS editing drops by.

Until then people should stop recommending Gigabyte boards for perfect MacOS compatibility.

I mean, not having the power button and WoL work is pretty far from compatibility in my book.


I've read in an other topic to press the power button twice to wake up the computer, and it works !! On the second time, the monitor wakes. :)

#70
ianmc81

ianmc81

    InsanelyMac Protégé

  • Members
  • Pip
  • 7 posts
  • Gender:Male
  • Location:Newcastle upon Tyne, UK

any progress on this problem?


You could try the fix described here:
http://www.insanelym...p...61640&st=20

i.e. boot with darkwake=0 to disable Low Power Wake altogether, if that's acceptable.

#71
Noam AA

Noam AA

    InsanelyMac Sage

  • Members
  • PipPipPipPipPipPip
  • 437 posts
  • Gender:Male
  • Location:IL
i don't know how much it will help you guys, but s mentioned in above post of mine
a friend with GA-P55A-UD3 had some troubles with the wake reason
"8/24/11 11:53:26.000 AM kernel: Wake reason: ? (Network)"

while i was SURE that when i finished his Lion installation, i did saw a wake reason

so, i started messing with things up, and eventually it was the easiest thing (but don't know if it will help, it help me at least)
the thing was chameleon got loaded from somewhere else, can't say for sure, maybe SL partition or another one on same disk. (i was doing it through screen sharing so i just told him to pull each of the drives to see if it solve it)
after MANUALLY installing chameleon on the Lion partition, and set it to active, also made sure it's loaded from BIOS. and Yaaa! wake problem gone all together (he also had some mysterious USB issues upon wake)

so just check if there isn't any other chameleon that load your Lion :)

BTW, also make sure your SATA drives are on the SATA2(Intel) and not the SATA3(Marvell) connections, first are best choice

#72
longtom

longtom

    InsanelyMac Sage

  • Members
  • PipPipPipPipPip
  • 265 posts
Does darkwake=0 also fix the Firewire issue after sleep?

#73
amorph

amorph

    InsanelyMac Protégé

  • Members
  • Pip
  • 13 posts
Can anyone help me? When I put my Computer (ASUS P6X58D Premium) to sleep it wakes up every time after several seconds. The reason:

Message Wake reason: ? (Network)

What could be the problem?

#74
xristoforos

xristoforos

    InsanelyMac Protégé

  • Members
  • Pip
  • 38 posts
  • Gender:Male
  • Location:Greece
I have a problem with autosleep.
My dvd player prevents the computer to go to auto sleep.

#75
papi1106

papi1106

    InsanelyMac Protégé

  • Members
  • Pip
  • 20 posts
  • Gender:Male
I'm having the same problem on 10.7.3
I've got - Asus p6t deluxe v2, i7 920
When I'm waking up the lion it freeze and then I need to restart it.
I tired everything:
sudo perl -pi -e 's|\x75\x30\x44\x89\xf8|\xeb\x30\x44\x89\xf8|; s|\x75\x3d\x8b\x75\x08|\xeb\x3d\x8b\x75\x08|' /System/Library/Extensions/AppleRTC.kext/Contents/MacOS/AppleRTC

And SleepEnableer

Even when I wake it via the power button it freeze

But nothing helps.
Did anyone managed to solve this problem?





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

© 2014 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy