843 replies to this topic
#81
Posted 29 December 2008 - 12:48 PM
I do not have errors. Video has earned without drivers and string
#82
Posted 29 December 2008 - 01:04 PM
@ koalala
For TM / Ethernet fix I need to select Ethernet PCI type and Ethernet Card slot.
From CPUZ I know my laptop was a PCI-E Ethernet Card, but...
how can I find the slot number?
I need to specify it in the dropdown box after PCI type
my laptop cupz related txt bellow
Ethernet Controller
bus 8 (0x08), device 0 (0x00), function 0 (0x00)
Common header
Vendor ID 0x11AB
Model ID 0x4353
Revision ID 0x14
PI 0x00
SubClass 0x00
BaseClass 0x02
Cache Line 0x10
Latency 0x00
Header 0x00
PCI header
Address 0 (memory) 0xF4000000
Address 2 (port) 0x00005000
Subvendor ID 0x1631
Subsystem ID 0xC20E
Int. Line 0x11
Int. Pin 0x01
Capabilities
Power Management Capability
Offset 48h
Version 1.1
Virtual Product Data Capability
Offset 50h
Message Signalled Interrupts Capability
Offset 5Ch
PCI Express Capability
Offset E0h
Device type Legacy PCI-E Endpoint Device
Port 0
Version 1.0
Link width 1x (max 1x)
Extended capabilities
For TM / Ethernet fix I need to select Ethernet PCI type and Ethernet Card slot.
From CPUZ I know my laptop was a PCI-E Ethernet Card, but...
how can I find the slot number?
I need to specify it in the dropdown box after PCI type
my laptop cupz related txt bellow
Ethernet Controller
bus 8 (0x08), device 0 (0x00), function 0 (0x00)
Common header
Vendor ID 0x11AB
Model ID 0x4353
Revision ID 0x14
PI 0x00
SubClass 0x00
BaseClass 0x02
Cache Line 0x10
Latency 0x00
Header 0x00
PCI header
Address 0 (memory) 0xF4000000
Address 2 (port) 0x00005000
Subvendor ID 0x1631
Subsystem ID 0xC20E
Int. Line 0x11
Int. Pin 0x01
Capabilities
Power Management Capability
Offset 48h
Version 1.1
Virtual Product Data Capability
Offset 50h
Message Signalled Interrupts Capability
Offset 5Ch
PCI Express Capability
Offset E0h
Device type Legacy PCI-E Endpoint Device
Port 0
Version 1.0
Link width 1x (max 1x)
Extended capabilities
#83
Posted 29 December 2008 - 01:45 PM
#84
Posted 29 December 2008 - 01:58 PM
#85
Posted 29 December 2008 - 03:11 PM
Can you port this to OS X?
#86
Posted 29 December 2008 - 03:23 PM
#87
Posted 29 December 2008 - 04:11 PM
Hi~
My BIOS file is ".bin" and patcher can't get it through.
Is there workaround?
Thanks
My BIOS file is ".bin" and patcher can't get it through.
cbrom.exe V1.82 [04/11/07] ©Phoenix Technologies 2001-2007 [ACPI] ROM is extracted to acpi.xtr Intel ACPI Component Architecture AML Disassembler version 20081204 [Dec 4 2008] Copyright © 2000 - 2008 Intel Corporation Supports ACPI Specification Revision 3.0a TableHeader length [0x43495041] greater than the input file size [0xA34A] Could not get table from the file
Is there workaround?
Thanks
#88
Posted 29 December 2008 - 05:03 PM
Thank you koala.
#89
Posted 29 December 2008 - 07:10 PM
koalala, on Dec 29 2008, 01:38 PM, said:
I want to improve all functions before :
Next version will be 0.2.0 and will include :
-AMI BIOS support
-NVCAP (Dual-DVI,DVI+VGA,TV-OUT) selecter
-ATI cards support
-MUTE fix
-Autofix warnings and errors
-Maybe partial HDEF patch (no need for HDAEnabler.kext)
-And bugfixes if you report bugs for 0.1.8
Until this is not finished, no new release.
0.2.1 will include sound patcher
Next version will be 0.2.0 and will include :
-AMI BIOS support
-NVCAP (Dual-DVI,DVI+VGA,TV-OUT) selecter
-ATI cards support
-MUTE fix
-Autofix warnings and errors
-Maybe partial HDEF patch (no need for HDAEnabler.kext)
-And bugfixes if you report bugs for 0.1.8
Until this is not finished, no new release.
0.2.1 will include sound patcher
I haven't had a chance to use your app yet, but it looks incredible. Great work, sir! Thanks for helping out the community!
-Stell
#90
Posted 29 December 2008 - 08:13 PM
Just tested the last 0.1.8 version. It has the same bug when tried to patch an existing .aml file (the file gets deleted and then theres an error saying that the file cannot be found). Im looking foward to your next update! Thanx!
#91
Posted 29 December 2008 - 10:37 PM
#92
Posted 29 December 2008 - 11:02 PM
koalala, on Dec 29 2008, 02:56 PM, said:
It's an AMI BIOS, but I patched it with the 0.2 Beta patcher.
Try this, this is your BIOS, patched for HPET, RTC and with GFX included.
Delete EFI strings first if you have.
Please report if working since I don't have any mainboard with AMI BIOS.
Try this, this is your BIOS, patched for HPET, RTC and with GFX included.
Delete EFI strings first if you have.
Please report if working since I don't have any mainboard with AMI BIOS.
EZ Flash 2 say wrong ID of PatchedAMI.ROM
Mobo ASUS P5B.
#93
Posted 29 December 2008 - 11:10 PM
koalala, on Dec 29 2008, 12:56 PM, said:
It's an AMI BIOS, but I patched it with the 0.2 Beta patcher.
Try this, this is your BIOS, patched for HPET, RTC and with GFX included.
Delete EFI strings first if you have.
Please report if working since I don't have any mainboard with AMI BIOS.
Try this, this is your BIOS, patched for HPET, RTC and with GFX included.
Delete EFI strings first if you have.
Please report if working since I don't have any mainboard with AMI BIOS.
Well thank you very much Kooala but what happened was this:
AMERICAN_MEGATRENDS.jpg 375.31K
196 downloadsI had to recover bios.
did not work at all.
will stay frozen.
there is any way to check the bios before you put it???
#94
Posted 30 December 2008 - 01:01 AM
Hey koalala,
I had great success patching an untouched dsdt.aml I had. The patcher added proper graphics and lan (tm fix) as well as the other various fixes. Thank you very much and I look forward to the updates you'll be adding to your application. Also a shout out to my boy, roisoft.
-Stell
I had great success patching an untouched dsdt.aml I had. The patcher added proper graphics and lan (tm fix) as well as the other various fixes. Thank you very much and I look forward to the updates you'll be adding to your application. Also a shout out to my boy, roisoft.
-Stell
#95
Posted 30 December 2008 - 01:31 AM
Hi
Here is my hardware:
Hardware: ASUS P5K-E WiFi-AP\Core 2 Duo E8200\4Gb Ram\2xHDD SATA2 320GB\GeForce 8800 GT 512Mb\HD Audio ADI1989B\Creative Audigy\Yukon 88E8056\RTL8187 WiFi\ASUS DRW-2014L1T Sata\Apple Keyboard
Will it works to me?
Sorry for my english.
Here is my hardware:
Hardware: ASUS P5K-E WiFi-AP\Core 2 Duo E8200\4Gb Ram\2xHDD SATA2 320GB\GeForce 8800 GT 512Mb\HD Audio ADI1989B\Creative Audigy\Yukon 88E8056\RTL8187 WiFi\ASUS DRW-2014L1T Sata\Apple Keyboard
Will it works to me?
Sorry for my english.
#96
Posted 30 December 2008 - 10:35 AM
BlackCH, on Dec 29 2008, 09:13 PM, said:
Just tested the last 0.1.8 version. It has the same bug when tried to patch an existing .aml file (the file gets deleted and then theres an error saying that the file cannot be found). Im looking foward to your next update! Thanx!
Have you uninstalled previous version ?
Since this function is working for me.
#97
Posted 30 December 2008 - 11:45 AM
Hi koalala
Assignment fix's interests: local0 fix, WAK fix ?
thanks
Assignment fix's interests: local0 fix, WAK fix ?
thanks
#98
Posted 30 December 2008 - 05:09 PM
homepav, on Dec 30 2008, 12:45 PM, said:
Hi koalala
Assignment fix's interests: local0 fix, WAK fix ?
thanks
Assignment fix's interests: local0 fix, WAK fix ?
thanks
Fixes are useful to correct compilation errors and warnings since original BIOS aren't perfect.
If you don't have error or warning concerning those things, don't use those fix.
#99
Posted 30 December 2008 - 08:03 PM
koalala, on Dec 30 2008, 11:35 AM, said:
Have you uninstalled previous version ?
Since this function is working for me.
Since this function is working for me.
I see is working for some other people too, so I think it must be something Im doing wrong. I used the windows uninstaller (from the control panel) to trash the old app. then I installed the new version. Same thing.... Is there any special uninstalling procedure? Im using XPpro sp3
#100
Posted 30 December 2008 - 09:07 PM
@ Koalala
the file requested
and thanks in advance
Sacaman1
the file requested
and thanks in advance
Sacaman1
Attached Files
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users



Sign In
Create Account









