mr_Harry_plotter_hk Posted May 1, 2008 Share Posted May 1, 2008 Hundred % work for ATI 2600 Pro for my Gigabyte System when perform installation using LEo4all v3. Just select the grahic card driver for ATI 2600 Pro PCI-E during installation phase... Done.. ATI Radeon HD 2600 XT: Chipset Model: ATI Radeon HD 2600 Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 256 MB Vendor: ATI (0x1002) Device ID: 0x9589 Revision ID: 0x0000 ROM Revision: 113-B1480A-236 EFI Driver Version: 01.00.236 Displays: Philips 200WS: Resolution: 1680 x 1050 @ 60 Hz Depth: 32-bit Color Core Image: Hardware Accelerated Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Supported Rotation: Supported Display Connector: Status: No display connected Link to comment https://www.insanelymac.com/forum/topic/94090-how-to-ati-radeon-hd-2400-2600-2900-3850-3870-on-leopard/page/6/#findComment-731281 Share on other sites More sharing options...
naddy69 Posted May 1, 2008 Share Posted May 1, 2008 9589 users are out of luck... No, they are not. Drumthrasher, I can't believe you are still complaining about this after 8 months. You have been told several times by many people (including me) how to make this work. There are only 2 possible reasons for yours not working. Either you are doing something wrong, or there is something wrong with your card. Either live with it the way it is or get another card. 9589s work fine. I have one - full QE/CI, rotation, dual monitors, everything works. Several folks on this page have shown that it works. Stop saying that 9589 users are out of luck... Link to comment https://www.insanelymac.com/forum/topic/94090-how-to-ati-radeon-hd-2400-2600-2900-3850-3870-on-leopard/page/6/#findComment-731984 Share on other sites More sharing options...
drumthrasher109 Posted May 1, 2008 Share Posted May 1, 2008 No, they are not. Drumthrasher, I can't believe you are still complaining about this after 8 months. You have been told several times by many people (including me) how to make this work. There are only 2 possible reasons for yours not working. Either you are doing something wrong, or there is something wrong with your card. Either live with it the way it is or get another card. 9589s work fine. I have one - full QE/CI, rotation, dual monitors, everything works. Several folks on this page have shown that it works. Stop saying that I know I feel weird about always complaining but it just has never worked. I've done all the instructions that everyone has told me, I tried several different installers, its still not working. Link to comment https://www.insanelymac.com/forum/topic/94090-how-to-ati-radeon-hd-2400-2600-2900-3850-3870-on-leopard/page/6/#findComment-732161 Share on other sites More sharing options...
naddy69 Posted May 1, 2008 Share Posted May 1, 2008 So why don't you get a different card? Clearly there is something wrong with yours. Link to comment https://www.insanelymac.com/forum/topic/94090-how-to-ati-radeon-hd-2400-2600-2900-3850-3870-on-leopard/page/6/#findComment-732217 Share on other sites More sharing options...
drumthrasher109 Posted May 2, 2008 Share Posted May 2, 2008 So why don't you get a different card? Clearly there is something wrong with yours. I'm not gonna buy a new card just because it doesn't work in an illegal operating system. I'm getting leo4allv3, i'll probably try it out in a few days, maybe it will work. Link to comment https://www.insanelymac.com/forum/topic/94090-how-to-ati-radeon-hd-2400-2600-2900-3850-3870-on-leopard/page/6/#findComment-732345 Share on other sites More sharing options...
lastExile Posted May 2, 2008 Share Posted May 2, 2008 Calm down people Link to comment https://www.insanelymac.com/forum/topic/94090-how-to-ati-radeon-hd-2400-2600-2900-3850-3870-on-leopard/page/6/#findComment-733110 Share on other sites More sharing options...
naddy69 Posted May 2, 2008 Share Posted May 2, 2008 I'm calm! I just want Drumthrasher to stop spreading the false info "9589 users are out of luck"! Link to comment https://www.insanelymac.com/forum/topic/94090-how-to-ati-radeon-hd-2400-2600-2900-3850-3870-on-leopard/page/6/#findComment-733189 Share on other sites More sharing options...
drumthrasher109 Posted May 3, 2008 Share Posted May 3, 2008 Well............ I installed leo4allv3, checking the 2600PRO (PCI-E) during installation and I STILL get the same results, just a blue screen with my cursor. Link to comment https://www.insanelymac.com/forum/topic/94090-how-to-ati-radeon-hd-2400-2600-2900-3850-3870-on-leopard/page/6/#findComment-733557 Share on other sites More sharing options...
mr_Harry_plotter_hk Posted May 3, 2008 Share Posted May 3, 2008 I am using Intel Duo2 system and it works fine with ATI 2600 Pro. For drumthrasher's system. it is AMD . Is it this reason causes his failure in installing ATI 2600pro ? By the way. I have a message from mac asking me to upgrade my firmware of 2600XT each time when I start up the system ( 10.5.2 thru lea4all v3). Should I upgrade it as instructed or ignore it ? Link to comment https://www.insanelymac.com/forum/topic/94090-how-to-ati-radeon-hd-2400-2600-2900-3850-3870-on-leopard/page/6/#findComment-733650 Share on other sites More sharing options...
binary_miracle Posted May 3, 2008 Share Posted May 3, 2008 Bit of a newb question here: I will be using an HD 2600 XT PCI-e card. Will it be possible to boot into the system to install natit using DVI out to a monitor, or will DVI out only be enabled after installing natit? Do I need to use a DVI to VGA adapter to install natit? I am just a bit confused because the original post says that DVI out will only work after installing natit. Thanks and peace! Link to comment https://www.insanelymac.com/forum/topic/94090-how-to-ati-radeon-hd-2400-2600-2900-3850-3870-on-leopard/page/6/#findComment-734329 Share on other sites More sharing options...
iFred Posted May 4, 2008 Share Posted May 4, 2008 I was wondering if there was any quick and easy way to make all of this into some form of an installer, where all you would have to do is pick out your card from a list, and hit "install" Link to comment https://www.insanelymac.com/forum/topic/94090-how-to-ati-radeon-hd-2400-2600-2900-3850-3870-on-leopard/page/6/#findComment-734880 Share on other sites More sharing options...
mcsmart Posted May 5, 2008 Author Share Posted May 5, 2008 I was wondering if there was any quick and easy way to make all of this into some form of an installer, where all you would have to do is pick out your card from a list, and hit "install" There already is an installer, just check the #RadeonHD channel on IRC. Link to comment https://www.insanelymac.com/forum/topic/94090-how-to-ati-radeon-hd-2400-2600-2900-3850-3870-on-leopard/page/6/#findComment-735981 Share on other sites More sharing options...
hosssss Posted May 5, 2008 Share Posted May 5, 2008 is it working with HD 2600 MOBILE too? what is my PCI ID?? thanx Link to comment https://www.insanelymac.com/forum/topic/94090-how-to-ati-radeon-hd-2400-2600-2900-3850-3870-on-leopard/page/6/#findComment-736135 Share on other sites More sharing options...
Threepwood Posted May 5, 2008 Share Posted May 5, 2008 There already is an installer, just check the #RadeonHD channel on IRC. Why not put these files up on the web? Not everyone knows about IRC (or wants to bother with it). Link to comment https://www.insanelymac.com/forum/topic/94090-how-to-ati-radeon-hd-2400-2600-2900-3850-3870-on-leopard/page/6/#findComment-736429 Share on other sites More sharing options...
drumthrasher109 Posted May 5, 2008 Share Posted May 5, 2008 Why not put these files up on the web? Not everyone knows about IRC (or wants to bother with it). I'd like to know why also... Link to comment https://www.insanelymac.com/forum/topic/94090-how-to-ati-radeon-hd-2400-2600-2900-3850-3870-on-leopard/page/6/#findComment-736677 Share on other sites More sharing options...
iBryce Posted May 5, 2008 Share Posted May 5, 2008 Oh thats easy, do the following:1. When you're at the Darwin/x86-Boot, type -s and press enter. 2. Once its done type /sbin/mount -uw / and press enter. 3. Then type cd /system/library/extensions and press enter. 4. Next do the following: rm -r Natit.kext rm - NVDAresman.kext 5. Finally do this: reboot If it doesn't work, do the same thing but instead of removing Natit.kext and the NVDAresman.kext, this time remove ATIRADEONX2000.kext. will this method work with the ATi Radeon HD 3850 because i am also getting the same exact screen after restart. Link to comment https://www.insanelymac.com/forum/topic/94090-how-to-ati-radeon-hd-2400-2600-2900-3850-3870-on-leopard/page/6/#findComment-736730 Share on other sites More sharing options...
drumthrasher109 Posted May 5, 2008 Share Posted May 5, 2008 will this method work with the ATi Radeon HD 3850 because i am also getting the same exact screen after restart. Yeah, this usually happens because of the Leopard Graphics Update. Link to comment https://www.insanelymac.com/forum/topic/94090-how-to-ati-radeon-hd-2400-2600-2900-3850-3870-on-leopard/page/6/#findComment-736731 Share on other sites More sharing options...
iBryce Posted May 5, 2008 Share Posted May 5, 2008 oh ok thanks! i'm about to install leo4allv3. p.s. you reply VERY fast Link to comment https://www.insanelymac.com/forum/topic/94090-how-to-ati-radeon-hd-2400-2600-2900-3850-3870-on-leopard/page/6/#findComment-736741 Share on other sites More sharing options...
Raymond888 Posted May 6, 2008 Share Posted May 6, 2008 pciid 94c81002 ati 2400xt can not work at all Link to comment https://www.insanelymac.com/forum/topic/94090-how-to-ati-radeon-hd-2400-2600-2900-3850-3870-on-leopard/page/6/#findComment-737108 Share on other sites More sharing options...
iBryce Posted May 7, 2008 Share Posted May 7, 2008 SUCCESS!!! I have my screen now at 1280x1024.. The only problem is that i'm missing "ATIRADEONX2000.kext" so i cant add my device id to it for Quartz. Im using Radon HD3850 Does anyone know where i can get this file? Link to comment https://www.insanelymac.com/forum/topic/94090-how-to-ati-radeon-hd-2400-2600-2900-3850-3870-on-leopard/page/6/#findComment-738049 Share on other sites More sharing options...
altidore Posted May 8, 2008 Share Posted May 8, 2008 SUCCESS!!! I have my screen now at 1280x1024.. The only problem is that i'm missing "ATIRADEONX2000.kext" so i cant add my device id to it for Quartz. Im using Radon HD3850 Does anyone know where i can get this file? Install graphics update Link to comment https://www.insanelymac.com/forum/topic/94090-how-to-ati-radeon-hd-2400-2600-2900-3850-3870-on-leopard/page/6/#findComment-739546 Share on other sites More sharing options...
iBryce Posted May 8, 2008 Share Posted May 8, 2008 Install graphics update Dude you are awesome.. Now i have Quarts and everything I love both of you. You do not understand how many times i have installed leopard only to get either white lines, or distorted screen at startup (i tried installing over 15 times). Now you understand how many. haah. well yall are both awesome and i will try to donate some money to both of you. :censored2: Link to comment https://www.insanelymac.com/forum/topic/94090-how-to-ati-radeon-hd-2400-2600-2900-3850-3870-on-leopard/page/6/#findComment-740126 Share on other sites More sharing options...
drumthrasher109 Posted May 8, 2008 Share Posted May 8, 2008 Dude you are awesome.. Now i have Quarts and everything I love both of you. You do not understand how many times i have installed leopard only to get either white lines, or distorted screen at startup (i tried installing over 15 times). Now you understand how many. haah. well yall are both awesome and i will try to donate some money to both of you. I don't know about you but I STILL HAVE THE PROBLEM and i've tried every possible combination of stuff. Link to comment https://www.insanelymac.com/forum/topic/94090-how-to-ati-radeon-hd-2400-2600-2900-3850-3870-on-leopard/page/6/#findComment-740143 Share on other sites More sharing options...
altidore Posted May 8, 2008 Share Posted May 8, 2008 Dude you are awesome.. Now i have Quarts and everything I love both of you. You do not understand how many times i have installed leopard only to get either white lines, or distorted screen at startup (i tried installing over 15 times). Now you understand how many. haah. well yall are both awesome and i will try to donate some money to both of you. :) :D Well....it was my very first post!!! Not bad, i think ...now, please someone help me with my ATI HD2400XT !!!! Link to comment https://www.insanelymac.com/forum/topic/94090-how-to-ati-radeon-hd-2400-2600-2900-3850-3870-on-leopard/page/6/#findComment-740177 Share on other sites More sharing options...
iBryce Posted May 9, 2008 Share Posted May 9, 2008 I don't know about you but I STILL HAVE THE PROBLEM and i've tried every possible combination of stuff. Do you have the HD3850? If you do i'll help. i was in that status for the past two months until those people told me what to do. Link to comment https://www.insanelymac.com/forum/topic/94090-how-to-ati-radeon-hd-2400-2600-2900-3850-3870-on-leopard/page/6/#findComment-740377 Share on other sites More sharing options...
Recommended Posts