Jump to content

*UPDATE* Zephyroth Leopard 10.5.2 V.2 for AMD installation process

ka911

By ka911,
in OSx86 10.5 (Leopard)

 Share
119 posts in this topic

Recommended Posts

Freosan
Freosan
Posted
Posted

Just installed Zephyroth 10.5.2 Rev2 and it was first success after Tiger for me, rev1 hangs during installation. The installation though didn't run well from normal mode(frozen 39 min left) and went fine only under -x. I've got few issues now. Can boot only with -f(same on Tiger), graphic card doesn't support CI/QE(works on Tiger with same NVinject 0.2.0),DVD not reading, Itunes not playing from Ipod(Usb is working) or CD,Lan not working(didn't install any 3rd party drvrs),no sound. Looks funny. What is working then? Didn't have all those issues under Jas 10.4.8. Any advice appreciated. Thanks

And my complex spec:

 

Hp XW9300

Tyan K8WE mobo(Nforce4) with havily modified Bios 2.09 from Hp,

2xOpteron 252(2.6 Hgz) SSE3 support

4gb DDR 3200ram,

Nvidia Qadro 3400,

Seagate sata 320gb

ka911
ka911
Posted
  • Author
Posted

Hi guys,

I did Step by Step How to Install OS X Leopard 10.5.2 with pics, this is for people never install Leopard before. You can see the document below! Enjoy and good luck!

 

Download Here!

ka911
ka911
Posted
  • Author
Posted

I'm having a problem to uploud to rapidshare.com, I will try to uploud it again today some time! but if any one want to upload it and shear the link with other...

I have one question, I have 2 hdd in my laptop how to set MBR?And please can you upload that guid on medifire or rapidshare?Thanks
you can set your HD to MBR from Option under Disk Utility. if you can download the pdf I attached you can see how to do that!
damunkee
damunkee
Posted
Posted

Works beautifly except for 2 issues.

 

1. SMB shares aren't connectable, in fact, any url typed into command k in finder fails with the "malformed Url" message (not that big of a deal as i can use smbclient on the command line.

 

2. using the included Nvidia drivers/ktexts, I can't get qe/ working. What gives? :) I have a geforce 7900gt and have tried the device ID method with no luck. Anyone have any other ideas?

handsomevj
handsomevj
Posted
Posted

I have a 64 bit AMD turion processor notebook, with 1.5Gigs of ram and nvidia chipset(i think?), sate 80Gig hard drive. When i try to install using DVD i get still waiting fo

 root device, what should i do?

The Milkman
The Milkman
Posted
Posted
Works beautifly except for 2 issues.

 

1. SMB shares aren't connectable, in fact, any url typed into command k in finder fails with the "malformed Url" message (not that big of a deal as i can use smbclient on the command line.

 

2. using the included Nvidia drivers/ktexts, I can't get qe/ working. What gives? :) I have a geforce 7900gt and have tried the device ID method with no luck. Anyone have any other ideas?

 

How do you use the smbclient at the command line?

cloudpjff7
cloudpjff7
Posted
Posted

Hello, I have recently download "Leopard-10.5.2-AMD-EFI-Rev2.iso" and burned it at 2x. I have a hp dv6748us laptop, you can find the specifications here: http://google3-cnet.com.com/laptops/hp-pav....html?tag=specs

When I boot from the dvd, I get the usual apple symbol and the loading, however, after a few minutes I get a little cross over the apple sign and it continues to load but will not launch the installer. When you boot with -v I get a "still waiting for root device" error, which repeats itself every few minutes. Here are some pictures:

http://c-pj.net/leopics/IMG_1584.JPG

http://c-pj.net/leopics/IMG_1585.JPG

http://c-pj.net/leopics/IMG_1587.JPG

ka911
ka911
Posted
  • Author
Posted

ok guys I did upload the file and you can download it from the first page! good luck

Hello, I have recently download "Leopard-10.5.2-AMD-EFI-Rev2.iso" and burned it at 2x. I have a hp dv6748us laptop, you can find the specifications here: http://google3-cnet.com.com/laptops/hp-pav....html?tag=specsWhen I boot from the dvd, I get the usual apple symbol and the loading, however, after a few minutes I get a little cross over the apple sign and it continues to load but will not launch the installer. When you boot with -v I get a "still waiting for root device" error, which repeats itself every few minutes. Here are some pictures:http://c-pj.net/leopics/IMG_1584.JPGhttp://c-pj.net/leopics/IMG_1585.JPGhttp://c-pj.net/leopics/IMG_1587.JPG
if this is your first time installing Leopard download my file and see if going to help you out!
cloudpjff7
cloudpjff7
Posted
Posted

Yes, I followed the directions, and burned my zephyroth disc. When I insert it and press enter, I get one of those cross, things on top of the gray apple screen. Right Now I'm trying a new AppleNforceAta.kext, like I was told on another forum, I'll tell you the results.

cloudpjff7
cloudpjff7
Posted
Posted

Hey ka911 I tried injecting AppleNforceAta.kext, and that didn't work it gives me about the same errors, It says something about sleep mode and then says still waiting for root device. Can you think of anything?

I'm using the zephyroth 10.5.2 rev. 2 disc btw.

ka911
ka911
Posted
  • Author
Posted
Hey ka911 I tried injecting AppleNforceAta.kext, and that didn't work it gives me about the same errors, It says something about sleep mode and then says still waiting for root device. Can you think of anything?

I'm using the zephyroth 10.5.2 rev. 2 disc btw.

 

ok! you are saying that you have installed Leopard on your PC right? and you have problem to boot to Leopard? and when you restart you PC to boot to your Leo it give you "waiting for root device" error?

 

download my attached file (AppleNForceATA.kext) the easy way I will do it by boot to windows and install MacDrive 7, then go to your Leopard HD and unzip AppleNForceATA.kext in System/Library/Extensions

and after you unzip the AppleNForceATA folder delete extensions.kext cache files then reboot and hit F8 then type -v -x then Enter

AppleNForceATA.kext.zip

ka911
ka911
Posted
  • Author
Posted

how do you have you Hardware set? do you have your DVD as Master or Slave? if so try to change it from Master to slave (for PC) and your HD from Slave to Master and run the Leo installation DVD again!

 Share
Go to topic listing
×
×
  • Create New...