Jump to content

Problems with notebook speakers?


iNoob
 Share

120 posts in this topic

Recommended Posts

It's really simple. Thanks Taruga for that, the solution was made for the ALC883 codec, but it may work on others also.

Edit info.plist and change

<!-- HP -->

<array>

<array>

<array>

<dict>

<key>NodeID</key>

<integer>27</integer>

</dict>

 

to:

<!-- HP -->

<array>

<array>

<array>

<dict>

<key>NodeID</key>

<integer>21</integer>

</dict>

 

And give it a try

If it doesn't work, post here your linux dump and PM me.

Hope it works for you!

The Info.plist in question is the AppleHDA.kext's.

Hope your  Hacbooks/Hackbook Pros will work now ;)

Link to comment
Share on other sites

Kinda.

 

I had Outputs/Inputs shown in Preferences but no sound at all. Taruga said this is maybe some Mute issue and maybe will be fixed in new Patcher.

 

With the Patchers (all!) i dont have Output/Input in Preferences

 

 

greetz

Link to comment
Share on other sites

  • 2 weeks later...

Hi, i have Aspire 3680 NB with ALC883.

Only AppleAzilla works getting sound.

 

Patching Apple HDA+ALCInjekt gives Items in Sound Perferences but no output (nowhere).

 

vendor-id

0x00008086

subsystem-vendor-id

0x00001458

 

******** Linux output *******

Codec: Realtek ALC883

Address: 0

Vendor Id: 0x10ec0883

Subsystem Id: 0x10250000

Revision Id: 0x100002

Default PCM: rates 0x560, bits 0x0e, types 0x1

Default Amp-In caps: N/A

Default Amp-Out caps: N/A

Node 0x02 [Audio Output] wcaps 0x11: Stereo

PCM: rates 0x560, bits 0x0e, types 0x1

Node 0x03 [Audio Output] wcaps 0x11: Stereo

PCM: rates 0x560, bits 0x0e, types 0x1

Node 0x04 [Audio Output] wcaps 0x11: Stereo

PCM: rates 0x560, bits 0x0e, types 0x1

Node 0x05 [Audio Output] wcaps 0x11: Stereo

PCM: rates 0x560, bits 0x0e, types 0x1

Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital

PCM: rates 0x560, bits 0x1e, types 0x1

Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono

Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In

Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1

Amp-In vals: [0x80 0x80]

PCM: rates 0x160, bits 0x06, types 0x1

Connection: 1

0x23

Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In

Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1

Amp-In vals: [0x80 0x80]

PCM: rates 0x160, bits 0x06, types 0x1

Connection: 1

0x22

Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital

PCM: rates 0x560, bits 0x1e, types 0x1

Connection: 1

0x1f

Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In

Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1

Amp-In vals: [0x80 0x80] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x19 0x19] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]

Connection: 10

0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17

Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-In vals: [0x80 0x80] [0x80 0x80]

Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0

Amp-Out vals: [0x00 0x00]

Connection: 2

0x02 0x0b

Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-In vals: [0x80 0x80] [0x80 0x80]

Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0

Amp-Out vals: [0x00 0x00]

Connection: 2

0x03 0x0b

Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-In vals: [0x80 0x80] [0x80 0x80]

Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0

Amp-Out vals: [0x00 0x00]

Connection: 2

0x04 0x0b

Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-In vals: [0x80 0x80] [0x80 0x80]

Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0

Amp-Out vals: [0x00 0x00]

Connection: 2

0x05 0x0b

Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono

Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono

Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono

Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono

Node 0x14 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0

Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]

Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-Out vals: [0x00 0x00]

Pincap 0x083e: IN OUT HP Detect

Pin Default 0x0121101f: [Jack] HP Out at Ext Rear

Conn = 1/8, Color = Black

Pin-ctls: 0x40: OUT

Connection: 5

0x0c* 0x0d 0x0e 0x0f 0x26

Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0

Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]

Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-Out vals: [0x00 0x00]

Pincap 0x083e: IN OUT HP Detect

Pin Default 0x99130110: [Fixed] Speaker at Int ATAPI

Conn = ATAPI, Color = Unknown

Pin-ctls: 0x40: OUT

Connection: 5

0x0c 0x0d* 0x0e 0x0f 0x26

Node 0x16 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0

Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]

Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-Out vals: [0x00 0x00]

Pincap 0x083e: IN OUT HP Detect

Pin Default 0x411111f0: [N/A] Speaker at Ext Rear

Conn = 1/8, Color = Black

Pin-ctls: 0x40: OUT

Connection: 5

0x0c 0x0d 0x0e* 0x0f 0x26

Node 0x17 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0

Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]

Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-Out vals: [0x00 0x00]

Pincap 0x083e: IN OUT HP Detect

Pin Default 0x411111f0: [N/A] Speaker at Ext Rear

Conn = 1/8, Color = Black

Pin-ctls: 0x40: OUT

Connection: 5

0x0c 0x0d 0x0e 0x0f* 0x26

Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0

Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]

Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-Out vals: [0x80 0x80]

Pincap 0x08173e: IN OUT HP Detect

Pin Default 0x01a19830: [Jack] Mic at Ext Rear

Conn = 1/8, Color = Pink

Pin-ctls: 0x24: IN

Connection: 5

0x0c* 0x0d 0x0e 0x0f 0x26

Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0

Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]

Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-Out vals: [0x80 0x80]

Pincap 0x08173e: IN OUT HP Detect

Pin Default 0x99a30131: [Fixed] Mic at Int ATAPI

Conn = ATAPI, Color = Unknown

Pin-ctls: 0x24: IN

Connection: 5

0x0c* 0x0d 0x0e 0x0f 0x26

Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0

Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]

Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-Out vals: [0x80 0x80]

Pincap 0x08173e: IN OUT HP Detect

Pin Default 0x0181303f: [Jack] Line In at Ext Rear

Conn = 1/8, Color = Blue

Pin-ctls: 0x20: IN

Connection: 5

0x0c* 0x0d 0x0e 0x0f 0x26

Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0

Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]

Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-Out vals: [0x00 0x00]

Pincap 0x08173e: IN OUT HP Detect

Pin Default 0x411111f0: [N/A] Speaker at Ext Rear

Conn = 1/8, Color = Black

Pin-ctls: 0xc0: OUT HP

Connection: 5

0x0c* 0x0d 0x0e 0x0f 0x26

Node 0x1c [Pin Complex] wcaps 0x400001: Stereo

Pincap 0x0820: IN

Pin Default 0x411111f0: [N/A] Speaker at Ext Rear

Conn = 1/8, Color = Black

Pin-ctls: 0x00:

Node 0x1d [Pin Complex] wcaps 0x400000: Mono

Pincap 0x0820: IN

Pin Default 0x411111f0: [N/A] Speaker at Ext Rear

Conn = 1/8, Color = Black

Pin-ctls: 0x00:

Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital

Pincap 0x0810: OUT

Pin Default 0x01451120: [Jack] SPDIF Out at Ext Rear

Conn = Optical, Color = Black

Pin-ctls: 0x00:

Connection: 1

0x06

Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital

Pincap 0x0820: IN

Pin Default 0x411111f0: [N/A] Speaker at Ext Rear

Conn = 1/8, Color = Black

Pin-ctls: 0x00:

Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono

Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono

Node 0x22 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]

Amp-Out caps: N/A

Amp-Out vals: [0x00 0x00]

Connection: 11

0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b

Node 0x23 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]

Amp-Out caps: N/A

Amp-Out vals: [0x00 0x00]

Connection: 11

0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b

Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono

Node 0x25 [Audio Output] wcaps 0x11: Stereo

PCM: rates 0x560, bits 0x0e, types 0x1

Node 0x26 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-In vals: [0x00 0x00] [0x80 0x80]

Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0

Amp-Out vals: [0x00 0x00]

Connection: 2

0x25 0x0b

*************

 

 

Can you help me patching AppleHDA (for 10.5.X) ? Thanks

Link to comment
Share on other sites

Sorry, but I don't get it..

 

I have a Fujitsu Siemens Amilo M6450G with ALC880 Chipset.

 

I used lots of hda patchers, but none of them worked. Finally I got sound working by using beta4some861_880Installer. Now it works when I plug in my Headphones, but no sound at all from the speakers.

 

So my Question is, where is the file exactly located, which I have to edit ?

 

Thanks for your help!

 

EDIT: Sorry, found the file (where to know that "kexts" are archives), but your solution doesn't work for me. I tried the following:

 

- bootet into Ubuntu Live, got the dump info for my ALC880.

- booted into MacOSX, copied the original AppleHDA.kext from Kalyways DVD into /S/L/Extensions/

- let diskutility repair access rights

- reboot

- did the hdapatch 1.20 with my codecdump file

- rebooted, nothing worked, no input / output devices

- ran the beta4some861_880Installer

- rebooted, sound works like before (only headphones)

 

Note: In Ubuntu Live, I have the same issue, no Sound comes from the speakers, only from headphones. This problem only could be solved by compiling Alsa-driver |-utils |-libs 1.0.16 manually.

 

I don't know what to do, maybe somebody can help.

 

As described in the FAQs, I bootet most recent Version of KNOPPIX, and heres my codec dump. (In Knoppix the Sound workes perfectly, speakers sound is controlled by "Side", Headphones by "Front" Channel.

 

 

 

codec_dump.txt

Edited by sYsT3m
Link to comment
Share on other sites

 Share

×
×
  • Create New...