KJP Posted February 8, 2010 Share Posted February 8, 2010 Well, I hinstalled iatkos v1.0i onto my sata hard drive with no problems at all. Everything went great but now I don't want to be swapping out HDs all the time so I tried to dual boot. No luck. I'm downloading iATKOS 7 now. I hope it will allow me to dual boot. Link to comment Share on other sites More sharing options...
IUiPodRepair Posted February 8, 2010 Share Posted February 8, 2010 Trying to install iATKOS v7 on my Asus W3J: Core Duo T2500 processor 320GB Blue Scorpio IDE (PATA) hard drive Mobile Intel® 945GM/GU/PM/GMS/940GML/943GML and Intel® 945GT Express Processor to DRAM Controller 2GB of RAM Atheros AR5008X Wireless Network adapter My main goal is to run a dual boot setup, with the possibility of a triple boot after I get a stable set up. I currently have the following partition scheme: 200GB NTFS (Win 7) 45GB FAT32 (MacOSX will go here) 45GB FAT32 (MacOSX backup will go here while I am tweaking with my hardware) ~9GB FAT32 (Planning to instal a small linux distro here) A small note regarding my partition scheme is that in Windows my hard drive shows as a "Dynamic Disk" and all my partitions show as "Simple Volume". I have tried to do some research regarding this but have not come up with any definitive answer. When I boot up with the iATKOS v7 disc I am able to detect my hard drive, but disc utility only recognizes two partitions, my 200GB NTFS partition and a 99GB "MSFT partition". My first time through I went ahead and formated the 99GB partition to HSF+ and installed MacOSX via the iATKOS v7 install DVD. Everything went fairly smooth, Chameleon bootloader allowed me to boot into MacOSX and recognized my Windows 7 partition (was unable to boot into it, but think I know how to resolve this). My mouse and keyboard were not working in Mac OSX but I think this is because I failed to install the proper kext during the install. I went ahead and restored my computer to an image just before my first attempt of installing OS X (couldn't go without my computer today at school). I am now at a point where I want to first ensure that my partition scheme (dynamic versus basic, simple versus primary) is correct. Anyone have any insight on this issue? Link to comment Share on other sites More sharing options...
Gorilla no baka Posted March 4, 2010 Share Posted March 4, 2010 Guys I am trying to install iATKOS v1.0i on my NecLavie laptop with the following specifications <pre>gorilla@gorilla-laptop:~$ sudo lshw [sudo] password for gorilla: gorilla-laptop description: Notebook product: PC-LL7509D vendor: NEC serial: Blah blah balah width: 32 bits capabilities: smbios-2.31 dmi-2.31 smp configuration: boot=oem-specific chassis=notebook uuid=0000001D-9409-45D3-81CA-386629E0A442 *-core description: Motherboard product: NR1 vendor: NEC physical id: 0 version: CH3M serial: Blah blah balah *-firmware description: BIOS vendor: NEC physical id: 0 version: NOTE BIOS Version /377A0900 (05/19/2004) size: 111KiB capacity: 448KiB capabilities: isa pci pcmcia pnp apm upgrade shadowing escd cdboot bootselect edd int13floppynec int13floppytoshiba int13floppy720 int5printscreen int9keyboard int14serial int17printer int10video acpi agp smartbattery biosbootspecification netboot *-cpu description: CPU product: Intel(R) Celeron(R) M processor 1200MHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: 6.9.5 slot: Socket uFCPGA size: 1200MHz capacity: 1200MHz width: 32 bits clock: 100MHz capabilities: fpu fpu_exception wp vme de pse tsc msr mce cx8 sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 tm pbe up bts *-cache:0 description: L1 cache physical id: 8 slot: Internal size: 64KiB capacity: 64KiB capabilities: internal write-back *-cache:1 description: L2 cache physical id: 9 slot: Internal size: 512KiB capacity: 1MiB capabilities: burst internal write-back *-memory:0 description: System Memory physical id: 1f slot: System board or motherboard capacity: 1280MiB *-bank:0 description: SODIMM DDR Synchronous 333 MHz (3.0 ns) physical id: 0 slot: DIMM1 size: 256MiB width: 64 bits clock: 333MHz (3.0ns) *-bank:1 description: SODIMM DDR Synchronous 333 MHz (3.0 ns) physical id: 1 slot: DIMM2 size: 512MiB width: 64 bits clock: 333MHz (3.0ns) *-memory:1 UNCLAIMED description: Flash Memory physical id: 20 slot: System board or motherboard capacity: 512KiB *-bank UNCLAIMED description: FLASH Non-volatile physical id: 0 slot: U27 size: 512KiB width: 8 bits *-memory:2 UNCLAIMED physical id: 1 *-memory:3 UNCLAIMED physical id: 2 *-pci description: Host bridge product: RS300 Host Bridge vendor: ATI Technologies Inc physical id: 100 bus info: pci@0000:00:00.0 version: 02 width: 32 bits clock: 66MHz configuration: driver=agpgart-ati latency=64 module=ati_agp *-pci:0 description: PCI bridge product: Radeon 9100 IGP AGP Bridge vendor: ATI Technologies Inc physical id: 1 bus info: pci@0000:00:01.0 version: 00 width: 32 bits clock: 66MHz capabilities: pci bus_master *-display UNCLAIMED description: VGA compatible controller product: RS300M AGP [Radeon Mobility 9100IGP] vendor: ATI Technologies Inc physical id: 5 bus info: pci@0000:01:05.0 version: 00 width: 32 bits clock: 66MHz capabilities: agp agp-3.0 pm bus_master cap_list configuration: latency=66 mingnt=8 *-usb:0 description: USB Controller product: OHCI USB Controller #1 vendor: ATI Technologies Inc physical id: 13 bus info: pci@0000:00:13.0 version: 01 width: 32 bits clock: 66MHz capabilities: bus_master configuration: driver=ohci_hcd latency=64 *-usb:1 description: USB Controller product: OHCI USB Controller #2 vendor: ATI Technologies Inc physical id: 13.1 bus info: pci@0000:00:13.1 version: 01 width: 32 bits clock: 66MHz capabilities: bus_master configuration: driver=ohci_hcd latency=64 *-usb:2 description: USB Controller product: EHCI USB Controller vendor: ATI Technologies Inc physical id: 13.2 bus info: pci@0000:00:13.2 version: 01 width: 32 bits clock: 66MHz capabilities: pm bus_master cap_list configuration: driver=ehci_hcd latency=64 module=ehci_hcd *-serial description: SMBus product: SMBus vendor: ATI Technologies Inc physical id: 14 bus info: pci@0000:00:14.0 version: 18 width: 32 bits clock: 66MHz configuration: driver=piix4_smbus latency=0 module=i2c_piix4 *-ide description: IDE interface product: Dual Channel Bus Master PCI IDE Controller vendor: ATI Technologies Inc physical id: 14.1 bus info: pci@0000:00:14.1 logical name: scsi0 logical name: scsi1 version: 00 width: 32 bits clock: 33MHz capabilities: ide bus_master emulated configuration: driver=pata_atiixp latency=64 *-disk description: ATA Disk product: IC25N060ATMR04-0 vendor: Hitachi physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: MO3O serial: Blah blah balah size: 55GiB (60GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=8f800000 *-volume:0 description: EXT3 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: 1.0 serial: 58f04f3c-8e9b-4e58-ac66-e2a02ce0192b size: 41GiB capacity: 41GiB capabilities: primary bootable journaled extended_attributes large_files ext3 ext2 initialized configuration: created=2010-02-25 14:09:02 filesystem=ext3 modified=2010-03-01 11:14:57 mounted=2010-03-01 11:00:28 state=clean *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 14GiB capacity: 14GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume description: Linux filesystem partition physical id: 5 logical name: /dev/sda5 logical name: / capacity: 14GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,barrier=1,data=ordered state=mounted *-cdrom description: DVD-RAM writer product: DVD-RAM UJ-820S vendor: MAT{censored}A physical id: 1 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd0 logical name: /dev/sr0 version: 1.01 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=ready *-medium physical id: 0 logical name: /dev/cdrom *-isa description: ISA bridge product: ATI Technologies Inc vendor: ATI Technologies Inc physical id: 14.3 bus info: pci@0000:00:14.3 version: 00 width: 32 bits clock: 66MHz capabilities: isa bus_master configuration: latency=0 *-pci:1 description: PCI bridge product: IXP200 3COM 3C920B Ethernet Controller vendor: ATI Technologies Inc physical id: 14.4 bus info: pci@0000:00:14.4 version: 00 width: 32 bits clock: 66MHz capabilities: pci bus_master *-pcmcia:0 description: CardBus bridge product: RL5c476 II vendor: Ricoh Co Ltd physical id: a bus info: pci@0000:02:0a.0 version: b1 width: 64 bits clock: 33MHz capabilities: pcmcia bus_master cap_list configuration: driver=yenta_cardbus latency=176 maxlatency=5 mingnt=128 module=yenta_socket resources: iomemory:b00603020-b0060301f *-pcmcia:1 description: CardBus bridge product: RL5c476 II vendor: Ricoh Co Ltd physical id: a.1 bus info: pci@0000:02:0a.1 version: b1 width: 64 bits clock: 33MHz capabilities: pcmcia bus_master cap_list configuration: driver=yenta_cardbus latency=176 maxlatency=5 mingnt=128 module=yenta_socket resources: iomemory:b00a07020-b00a0701f *-firewire description: FireWire (IEEE 1394) product: R5C552 IEEE 1394 Controller vendor: Ricoh Co Ltd physical id: a.2 bus info: pci@0000:02:0a.2 version: 06 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=ohci1394 latency=64 maxlatency=4 mingnt=2 module=ohci1394 *-system:0 description: SD Host controller product: R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter vendor: Ricoh Co Ltd physical id: a.3 bus info: pci@0000:02:0a.3 version: 15 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=sdhci-pci latency=64 module=sdhci_pci *-system:1 UNCLAIMED description: System peripheral product: R5C592 Memory Stick Bus Host Adapter vendor: Ricoh Co Ltd physical id: a.4 bus info: pci@0000:02:0a.4 version: 06 width: 32 bits clock: 33MHz capabilities: pm cap_list configuration: latency=0 *-system:2 UNCLAIMED description: System peripheral product: xD-Picture Card Controller vendor: Ricoh Co Ltd physical id: a.5 bus info: pci@0000:02:0a.5 version: 01 width: 32 bits clock: 33MHz capabilities: pm cap_list configuration: latency=0 *-network description: Ethernet interface product: RTL-8139/8139C/8139C+ vendor: Realtek Semiconductor Co., Ltd. physical id: b bus info: pci@0000:02:0b.0 logical name: eth0 version: 10 serial: 00:0d:5e:b4:2a:a6 size: 100MB/s capacity: 100MB/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=full ip=192.168.1.64 latency=64 link=yes maxlatency=64 mingnt=32 module=8139too multicast=yes port=MII speed=100MB/s *-multimedia description: Multimedia audio controller product: IXP150 AC'97 Audio Controller vendor: ATI Technologies Inc physical id: 14.5 bus info: pci@0000:00:14.5 version: 00 width: 32 bits clock: 66MHz capabilities: bus_master configuration: driver=ATI IXP AC97 controller latency=64 mingnt=2 module=snd_atiixp *-communication description: Modem product: IXP AC'97 Modem vendor: ATI Technologies Inc physical id: 14.6 bus info: pci@0000:00:14.6 version: 01 width: 32 bits clock: 66MHz capabilities: bus_master configuration: driver=ATI IXP MC97 controller latency=64 mingnt=2 module=snd_atiixp_modem *-scsi physical id: 3 bus info: usb@1:4 logical name: scsi2 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk product: Cruzer vendor: SanDisk physical id: 0.0.0 bus info: scsi@2:0.0.0 logical name: /dev/sdb version: 7.01 serial: u size: 3839MiB (4025MB) capabilities: removable *-medium physical id: 0 logical name: /dev/sdb size: 3839MiB (4025MB) capabilities: partitioned partitioned:dos configuration: signature=0046295d *-volume description: Windows FAT volume vendor: MSDOS5.0 physical id: 1 logical name: /dev/sdb1 logical name: /media/GORILLA SAN version: FAT32 serial: 644c-8056 size: 3837MiB capacity: 3839MiB capabilities: primary bootable fat initialized configuration: FATs=2 filesystem=fat mount.fstype=vfat mount.options=rw,nosuid,nodev,uid=1000,fmask=0077,dmask=0077,codepage=cp437,ioch arset=iso8859-1,shortname=mixed,utf8,flush state=mounted *-battery description: Lithium Ion Battery product: Blah blah balah vendor: NEC physical id: 1 version: 12/01/2003 slot: In the Front, on the left-hand side capacity: 651200mWh configuration: voltage=14.8V *-network:0 DISABLED description: Ethernet interface physical id: 2 logical name: pan0 serial: 16:3c:c6:a4:e6:54 capabilities: ethernet physical configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A link=yes multicast=yes *-network:1 DISABLED description: Ethernet interface physical id: 3 logical name: vboxnet0 serial: 0a:00:27:00:00:00 capabilities: ethernet physical </pre> http://www.insanelymac.com/forum/index.php...st&id=67931 The best i got to is seeing the apple logo flashing for a brief second and then the laptop restarts. That`s happening when i press enter at the prompt.If i let it boot by itself then i get the following error System config file`/com.apple.Bot.plist` not found I tried all the things suggested along of the years in this thread (Yes , i read it all from the beggining to the very end) No -s -x -F -v works...the result is the same : flashin glogo for a brief second then restart What am i doing wrong?? Any suggestions please? Cheers EDIT: I just downloaded and tried again with iATKOS_v7.iso.. Same story..No Dice... Any suggestions ... Guys?? Cheers Link to comment Share on other sites More sharing options...
Gorilla no baka Posted March 5, 2010 Share Posted March 5, 2010 Guys I am trying to install iATKOS v1.0i on my NecLavie laptop with the following specifications <pre>gorilla@gorilla-laptop:~$ sudo lshw [sudo] password for gorilla: gorilla-laptop description: Notebook product: PC-LL7509D vendor: NEC serial: Blah blah balah width: 32 bits capabilities: smbios-2.31 dmi-2.31 smp configuration: boot=oem-specific chassis=notebook uuid=0000001D-9409-45D3-81CA-386629E0A442 *-core description: Motherboard product: NR1 vendor: NEC physical id: 0 version: CH3M serial: Blah blah balah *-firmware description: BIOS vendor: NEC physical id: 0 version: NOTE BIOS Version /377A0900 (05/19/2004) size: 111KiB capacity: 448KiB capabilities: isa pci pcmcia pnp apm upgrade shadowing escd cdboot bootselect edd int13floppynec int13floppytoshiba int13floppy720 int5printscreen int9keyboard int14serial int17printer int10video acpi agp smartbattery biosbootspecification netboot *-cpu description: CPU product: Intel(R) Celeron(R) M processor 1200MHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: 6.9.5 slot: Socket uFCPGA size: 1200MHz capacity: 1200MHz width: 32 bits clock: 100MHz capabilities: fpu fpu_exception wp vme de pse tsc msr mce cx8 sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 tm pbe up bts *-cache:0 description: L1 cache physical id: 8 slot: Internal size: 64KiB capacity: 64KiB capabilities: internal write-back *-cache:1 description: L2 cache physical id: 9 slot: Internal size: 512KiB capacity: 1MiB capabilities: burst internal write-back *-memory:0 description: System Memory physical id: 1f slot: System board or motherboard capacity: 1280MiB *-bank:0 description: SODIMM DDR Synchronous 333 MHz (3.0 ns) physical id: 0 slot: DIMM1 size: 256MiB width: 64 bits clock: 333MHz (3.0ns) *-bank:1 description: SODIMM DDR Synchronous 333 MHz (3.0 ns) physical id: 1 slot: DIMM2 size: 512MiB width: 64 bits clock: 333MHz (3.0ns) *-memory:1 UNCLAIMED description: Flash Memory physical id: 20 slot: System board or motherboard capacity: 512KiB *-bank UNCLAIMED description: FLASH Non-volatile physical id: 0 slot: U27 size: 512KiB width: 8 bits *-memory:2 UNCLAIMED physical id: 1 *-memory:3 UNCLAIMED physical id: 2 *-pci description: Host bridge product: RS300 Host Bridge vendor: ATI Technologies Inc physical id: 100 bus info: pci@0000:00:00.0 version: 02 width: 32 bits clock: 66MHz configuration: driver=agpgart-ati latency=64 module=ati_agp *-pci:0 description: PCI bridge product: Radeon 9100 IGP AGP Bridge vendor: ATI Technologies Inc physical id: 1 bus info: pci@0000:00:01.0 version: 00 width: 32 bits clock: 66MHz capabilities: pci bus_master *-display UNCLAIMED description: VGA compatible controller product: RS300M AGP [Radeon Mobility 9100IGP] vendor: ATI Technologies Inc physical id: 5 bus info: pci@0000:01:05.0 version: 00 width: 32 bits clock: 66MHz capabilities: agp agp-3.0 pm bus_master cap_list configuration: latency=66 mingnt=8 *-usb:0 description: USB Controller product: OHCI USB Controller #1 vendor: ATI Technologies Inc physical id: 13 bus info: pci@0000:00:13.0 version: 01 width: 32 bits clock: 66MHz capabilities: bus_master configuration: driver=ohci_hcd latency=64 *-usb:1 description: USB Controller product: OHCI USB Controller #2 vendor: ATI Technologies Inc physical id: 13.1 bus info: pci@0000:00:13.1 version: 01 width: 32 bits clock: 66MHz capabilities: bus_master configuration: driver=ohci_hcd latency=64 *-usb:2 description: USB Controller product: EHCI USB Controller vendor: ATI Technologies Inc physical id: 13.2 bus info: pci@0000:00:13.2 version: 01 width: 32 bits clock: 66MHz capabilities: pm bus_master cap_list configuration: driver=ehci_hcd latency=64 module=ehci_hcd *-serial description: SMBus product: SMBus vendor: ATI Technologies Inc physical id: 14 bus info: pci@0000:00:14.0 version: 18 width: 32 bits clock: 66MHz configuration: driver=piix4_smbus latency=0 module=i2c_piix4 *-ide description: IDE interface product: Dual Channel Bus Master PCI IDE Controller vendor: ATI Technologies Inc physical id: 14.1 bus info: pci@0000:00:14.1 logical name: scsi0 logical name: scsi1 version: 00 width: 32 bits clock: 33MHz capabilities: ide bus_master emulated configuration: driver=pata_atiixp latency=64 *-disk description: ATA Disk product: IC25N060ATMR04-0 vendor: Hitachi physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: MO3O serial: Blah blah balah size: 55GiB (60GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=8f800000 *-volume:0 description: EXT3 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: 1.0 serial: 58f04f3c-8e9b-4e58-ac66-e2a02ce0192b size: 41GiB capacity: 41GiB capabilities: primary bootable journaled extended_attributes large_files ext3 ext2 initialized configuration: created=2010-02-25 14:09:02 filesystem=ext3 modified=2010-03-01 11:14:57 mounted=2010-03-01 11:00:28 state=clean *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 14GiB capacity: 14GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume description: Linux filesystem partition physical id: 5 logical name: /dev/sda5 logical name: / capacity: 14GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,barrier=1,data=ordered state=mounted *-cdrom description: DVD-RAM writer product: DVD-RAM UJ-820S vendor: MAT{censored}A physical id: 1 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd0 logical name: /dev/sr0 version: 1.01 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=ready *-medium physical id: 0 logical name: /dev/cdrom *-isa description: ISA bridge product: ATI Technologies Inc vendor: ATI Technologies Inc physical id: 14.3 bus info: pci@0000:00:14.3 version: 00 width: 32 bits clock: 66MHz capabilities: isa bus_master configuration: latency=0 *-pci:1 description: PCI bridge product: IXP200 3COM 3C920B Ethernet Controller vendor: ATI Technologies Inc physical id: 14.4 bus info: pci@0000:00:14.4 version: 00 width: 32 bits clock: 66MHz capabilities: pci bus_master *-pcmcia:0 description: CardBus bridge product: RL5c476 II vendor: Ricoh Co Ltd physical id: a bus info: pci@0000:02:0a.0 version: b1 width: 64 bits clock: 33MHz capabilities: pcmcia bus_master cap_list configuration: driver=yenta_cardbus latency=176 maxlatency=5 mingnt=128 module=yenta_socket resources: iomemory:b00603020-b0060301f *-pcmcia:1 description: CardBus bridge product: RL5c476 II vendor: Ricoh Co Ltd physical id: a.1 bus info: pci@0000:02:0a.1 version: b1 width: 64 bits clock: 33MHz capabilities: pcmcia bus_master cap_list configuration: driver=yenta_cardbus latency=176 maxlatency=5 mingnt=128 module=yenta_socket resources: iomemory:b00a07020-b00a0701f *-firewire description: FireWire (IEEE 1394) product: R5C552 IEEE 1394 Controller vendor: Ricoh Co Ltd physical id: a.2 bus info: pci@0000:02:0a.2 version: 06 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=ohci1394 latency=64 maxlatency=4 mingnt=2 module=ohci1394 *-system:0 description: SD Host controller product: R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter vendor: Ricoh Co Ltd physical id: a.3 bus info: pci@0000:02:0a.3 version: 15 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=sdhci-pci latency=64 module=sdhci_pci *-system:1 UNCLAIMED description: System peripheral product: R5C592 Memory Stick Bus Host Adapter vendor: Ricoh Co Ltd physical id: a.4 bus info: pci@0000:02:0a.4 version: 06 width: 32 bits clock: 33MHz capabilities: pm cap_list configuration: latency=0 *-system:2 UNCLAIMED description: System peripheral product: xD-Picture Card Controller vendor: Ricoh Co Ltd physical id: a.5 bus info: pci@0000:02:0a.5 version: 01 width: 32 bits clock: 33MHz capabilities: pm cap_list configuration: latency=0 *-network description: Ethernet interface product: RTL-8139/8139C/8139C+ vendor: Realtek Semiconductor Co., Ltd. physical id: b bus info: pci@0000:02:0b.0 logical name: eth0 version: 10 serial: 00:0d:5e:b4:2a:a6 size: 100MB/s capacity: 100MB/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=full ip=192.168.1.64 latency=64 link=yes maxlatency=64 mingnt=32 module=8139too multicast=yes port=MII speed=100MB/s *-multimedia description: Multimedia audio controller product: IXP150 AC'97 Audio Controller vendor: ATI Technologies Inc physical id: 14.5 bus info: pci@0000:00:14.5 version: 00 width: 32 bits clock: 66MHz capabilities: bus_master configuration: driver=ATI IXP AC97 controller latency=64 mingnt=2 module=snd_atiixp *-communication description: Modem product: IXP AC'97 Modem vendor: ATI Technologies Inc physical id: 14.6 bus info: pci@0000:00:14.6 version: 01 width: 32 bits clock: 66MHz capabilities: bus_master configuration: driver=ATI IXP MC97 controller latency=64 mingnt=2 module=snd_atiixp_modem *-scsi physical id: 3 bus info: usb@1:4 logical name: scsi2 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk product: Cruzer vendor: SanDisk physical id: 0.0.0 bus info: scsi@2:0.0.0 logical name: /dev/sdb version: 7.01 serial: u size: 3839MiB (4025MB) capabilities: removable *-medium physical id: 0 logical name: /dev/sdb size: 3839MiB (4025MB) capabilities: partitioned partitioned:dos configuration: signature=0046295d *-volume description: Windows FAT volume vendor: MSDOS5.0 physical id: 1 logical name: /dev/sdb1 logical name: /media/GORILLA SAN version: FAT32 serial: 644c-8056 size: 3837MiB capacity: 3839MiB capabilities: primary bootable fat initialized configuration: FATs=2 filesystem=fat mount.fstype=vfat mount.options=rw,nosuid,nodev,uid=1000,fmask=0077,dmask=0077,codepage=cp437,ioch arset=iso8859-1,shortname=mixed,utf8,flush state=mounted *-battery description: Lithium Ion Battery product: Blah blah balah vendor: NEC physical id: 1 version: 12/01/2003 slot: In the Front, on the left-hand side capacity: 651200mWh configuration: voltage=14.8V *-network:0 DISABLED description: Ethernet interface physical id: 2 logical name: pan0 serial: 16:3c:c6:a4:e6:54 capabilities: ethernet physical configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A link=yes multicast=yes *-network:1 DISABLED description: Ethernet interface physical id: 3 logical name: vboxnet0 serial: 0a:00:27:00:00:00 capabilities: ethernet physical </pre> http://www.insanelymac.com/forum/index.php...st&id=67931 The best i got to is seeing the apple logo flashing for a brief second and then the laptop restarts. That`s happening when i press enter at the prompt.If i let it boot by itself then i get the following error System config file`/com.apple.Bot.plist` not found I tried all the things suggested along of the years in this thread (Yes , i read it all from the beggining to the very end) No -s -x -F -v works...the result is the same : flashin glogo for a brief second then restart What am i doing wrong?? Any suggestions please? Cheers EDIT: I just downloaded and tried again with iATKOS_v7.iso.. Same story..No Dice... Any suggestions ... Guys?? Cheers /Bump Link to comment Share on other sites More sharing options...
Tam Mai Posted July 19, 2010 Share Posted July 19, 2010 May you add more kext into next release? I installed on my laptop, but network card, wifi and sound not working . My laptop is Lenovo Y430, NIC is Broadcom bcm5906, Intel wifi 5100 AGN and sound is Intel HDA. Missing them make me feel bore and don't want use OSX86 anymore. Thanks for your works. Link to comment Share on other sites More sharing options...
diazneoones Posted October 18, 2010 Share Posted October 18, 2010 MAJOR EDIT: iATKOS does NOT come with netkas pc_efi but they have complied their own efi, however this does still mean that you can have updates from official Apple Servers via Software Update - This is great news! What is so special about iATKOS? Well, it is one of the first FULLY patched Leopard v10.5.1 releases. It is also known to have a preinstalled complied efi which means that you can install legit Apple Updates without downloading any patches or 3rd party software and also you can stop worrying about reboots hanging on the "Loading Darwin" screen. It is known as a "White Box" install, this basically means that all you have to do is create a partition, format the partition and away you go without any other edits to your system configs and files. It is said to be a "fool proof" install, this means that you should not be running into any errors. So what is different? Another change to this Leopard version is that, it is 2.5GB and if you downloaded other versions you may have noticed they were 4GB. The reason why it is 2.5GB (When uncompressed) because they have slimmed the system down, meaning you won't have any non-useful kexts and other bits and bobs loading or taking up space, they also have removed the PPC code. Anything else to add? This version is also said to be containing all the files, kexts, patches we need! I am guessing that this version is going to work on people's computers whom may have trouble installing ToH's version. Others have also said, you shouldn't be experiencing any problems with any programs you may wish to install (people have stated that installing Photoshop or Adobe products damages their install; This version (iATKOS promises not to have problems with software). Also all files etc are all vanilla. What are the differences between v1.0i and v1.0u? There is two major differences, there has been developments of booting to original kernel with a modified bootloader and that is has been revised more! v1.0i is the only one that has been released to the public. As I understand it the "i" indicates Intel only code (as in Intel vs PPC, not Intel vs AMD), hence the smaller file size of 2 gigs, and the "u" indicates universal which will probably run the older mac stuff (PPC) and be a 4 gig download. Uphuck and Co did this with their last release but used different letters. v1.3 was "universal" and their other tiger releases were Intel code only. Wiki.. Vanilla means unmodified files aka legit files from Mac OS X Leopard. ToH is a guy whom have created many OSx86 versions (A simple search on the forums will give you more information about him) PPC is PowerPC files...(I'm not quite sure, can someone give more information about this?) White Box install, this basically means that all you have to do is create a partition, format the partition and away you go without any other edits to your system configs and files. EFI, this is something that integrates into your bootloader which allows you to upgrade to official apple versions so when 10.5.2 comes out in Jan 08 - you can upgrade to it the same time as legit Mac users. Extras..! For the unexperienced, when attempting to install OSx86, please install CPU-z and MAKE SURE your system either supports SSE2, SSE3 (SSE3+ for iATKOS) before going to install and versions of OSx86. A great guide can be found @ http://coolblog.profit42.com/2007/07/03/up...ual-boot-guide/ - The guide is about installing a dual boot system with OSx86 and Vista. The OSx86 wiki is very helpful, please search the forums and the wiki before asking anything or requesting anything. The wiki is located @ http://wiki.osx86project.org/ Questions As of now, there is no SSE2 or AMD support. It is said that an AMD and an SSE2 version will come around early 2008, I can't promise anything. I will do more research on ETA support Yes! The packages have been slimmed down, you should have the default apps that a real Leopard comes with. The stuff that have been removed are stuff that the PCs cannot use and they just take up space! I'm not sure, but I'm guessing these are going to be there: These Graphic cards should work, some may need editing and changing of kexts but these work! For more info @ http://wiki.osx86project.org/wiki/index.ph...#Graphics_Cards iATKOS should work on VMware, I'm pretty certain that it is going to work! First question: You might be able but I can assure you no has at this time of writing, I will be trying this for you! Second question: I'm not really sure since no one has tested that. Third question: There is a chance but you can repair it but going though the same steps when creating the dual boot. Forth Question: ? ...Geforce 7900 GS is stated to work! ... To use the complied efi in iATKOS, you must have MBR as it currently does not support GUID (Maybe in the future..) It might, I am unsure. More research will be done onto this! I'm not sure, pc_efi is installed on the default darwin bootloader. However you cannot use pc_efi on Windows Bootloader...So if you want to cross out efi, use windows bootloader. I don't recommend this. No news have been said about an exact date that the SSE2 version will be public. I am guessing it is going to be an white box install. I am guessing that it is going to be in English and Turkish however there is a chance for other languages. Moreover, you can download languages from Apple. I am guessing that it will work however no one knows if it works with 10.5.1 but the motherboard is known to work with 10.4.8 so therefore you have a strong chance of it working. I should re-read the FAQ, no, you can still dual boot, don't get me wrong but to use the complied efi you must use the default darwin bootloader. The efi is part of the bootloader to allow vanilla files to be able to open and run! You can dual boot with Grub, Windows Boot Loader....Anyone one of them But to use the integrated efi you must use the default darwin bootloader. If you wish to use Grub, you'll need to install netkas pc_efi on your Grub bootloader. Answers: 1. Yes- your XP partition is accessable within the Darwin Bootloader, just press F8 before darwin loads... 2. Vanilla basically means all legi files, with iATKOS you can install official updates (if you have installed efi) A release cannot support ALL sata drives however it can support a high amount of the sata drives. No, currently iATKOS supports MBR. You don't need to dedicate an whole harddrive for iATKOS, you can dualboot. READ ME (iATKOS v1.0i) An UPDATE will be coming to this FAQ about iATKOS, feel free to ask questions and post corrections or add-ons...Many thanks! A thank you to: ucan for providing the READ ME for iATKOS. shav4life for answering a few questions. Geeze for answering a question. Synaesthesia for making some corrections. ToT on #irc for telling that the complied efi in iATKOS only supports MBR eskurza for correcting efi errors! Hi Guys, Here its finally after many try's finally worked ,haha Mac leapord installed sucessfully,i registered just say thanks all post which was helpful in making it. procedure i followed. 1) downloaded ideneb ,installed sucessfully but booting problem, Now downloaded iaktos v7 leapord version. 1)intially it loops at start,finally came through a solution with typing cpus=1 as mine is dual core. 2)set iaktos dvd as first drive to boot. 3)press F8 as soon as it loads. 4)on boot option type cpus=1 -v busratio=30 then hit enter 5)Its checks and you get the loading screen,hit contiue 6)Goto utilities,disk utility,create a mac drive as journaled. 7)Hit next and important choose the following in IAKtos v7 on cutomize Chameloen v2 */extra *psdt *dsmos *9.5 version kernel vodoo *APIC DRIVER *DISABLER *OHR *REMOVE TYMCE *AHCI *INTEL SATA\IDE *JMICRON SATA\IDE *POST INSTALL ACTIONS. 8)hit done and install. install takes about 10-15 min on post we get some successfull messages. reboot and change bois to harddrive which you instaled as first boot. 9)Chameloen boot loader loads,hit any key 10)you would get mac icon drive name which you installed hit space to boot otion to appear 11)type cpu=1 busratio=30 as weset intially 12)you would get mac (apple white screen with loading symbol) 13)It might load sometime as stuck for loading symbol,wait it will still work as hardrive is read. 14)then comes your wha wha Apple welcome ,do post registration for logon ..haha you have a mac now tips:please set keyboard setting as it might be wierd untillits setup. had issue later fixed it. All works fine on my system no issues my comp spec Pentium ee5500 dual core supports sse(1,2,3,3s)vt-x and many more graphic:nvidia 7300 series ram 2 gb sata drives Link to comment Share on other sites More sharing options...
Recommended Posts