Jump to content

Leopard Perfect Install

Onetrack

By Onetrack,
in OSx86 10.5 (Leopard)

 Share
1041 posts in this topic

Recommended Posts

JonyBravo
JonyBravo
Posted
Posted
Did you use the right one? It's not the original Natit but that one that was modified around 15 Nov 2007 by Paulicat just for GMA 950 and X3100 laptops (and should be used with the original AppleIntelIntegratedFramebuffer). If not, you can get one following the link from my signature.

--S

 

I may need better instructions. I placed the natit following your link. OS states that it cannot use it and I should re-install it.

Jenn
Jenn
Posted
Posted

Hopefully I'm not jinxing myself, but... first try with installing and loading, and LEOPARD WORKS! :D

 

Computer specs:

HP ZD8000 series

 

3.0GHz Intel® Pentium® 4 Processor 630,SpeedStep, and HT Technology

2048MB DDR2 SDRAM (2 x 1GB) Dual Channel at 400MHz

ATI MOBILITY RADEON X600

80GB 4200 Hard Drive

 

So far EVERYTHING is working - sound, video, INTERNET. omg omg omg, I'm so excited about this. THANK YOU SO MUCH! ;)

nighthawk507
nighthawk507
Posted
Posted

CPU TYPE:petium d 940 @ 3.2Ghz

Memory:1 GB

Bus Speed:800 Mhz

mothere borad is asus p5e-vm

sse 3

now i have tryed to make a disk my self got it installed but trying to boot to it comes up blank no darwin looking i have tryied all kaywins and toh versions too the only one that seems to work of leopard is the flat img

any ideas please help?

guestora
guestora
Posted
Posted

For new laptops with intel 965 chips it's so easy to install x3100 with iATKOS first release and nearly perfect except audio phone jack and microphone that doesn't work.

When you install Leo don't remove thermal kekt because your CPU will hot above 80!

my laptop is Compaq Presario C712TU and it's run so smooth

although it's only Core Duo 1.46GHz. 15.4" with 2 Giga Rams

and iATKOS detect 144 shre Video Rams

 

Oh! another problems is sleep mode after installed don't forget to disable energy saver in system preferences. I use laptop like desktop so i don't need sleep mode.

Stravaganza
Stravaganza
Posted
Posted
I may need better instructions. I placed the natit following your link. OS states that it cannot use it and I should re-install it.

I found the original post here. This is what I used to fix my GMA 950 laptop.

--S

Macstevo
Macstevo
Posted
Posted
i have amd64 3200+ force4 chipset 2 hdds sata 2 both,nvidia 7300 gt.i just can't install os x on it.i made a partition primary active.it booted up from the dvd,then disk util,erase journaled,i selected only the amd patch.it starts to install then at some point it freezes.i tried kalyway 10.4.10 at 4% it freezes.i tried jas 10.4.8 ...freez.i tried ToH 10.5 and at the and on the installtion like 99% it freezes.i tried everything.nothing worked.i'm going nuts with this.please help.I'm sorry if i'm in the wrong forum ...i'm new here.

I have a similar setup to CMMA, but I am running the Kalyway 10.4.10 off an IDE DVD, does anyone know how to mount the iso onto a USB HDD and get it running off that rather than the DVD, or is that possible?? Any help appreciated

clouser
clouser
Posted
Posted

omfg...ive read about every post...and im so lost, i feel like a a complete retard cuz i installed tiger with no problems a while back...how do u make a brazilmac disk?? and i have the kalyway leopard 10.5.1 install dvd...and it gets 3/4 the way done and freezes, but completes and restarts, but goes right back to te beinginng to the language menu... {censored} skl;dafjaslkjfd

Discobob73
Discobob73
Posted
Posted
Does anyone know, why Leopard can't recognize my SATA controller? I have 945GCMX-S2 (F4 BIOS) and using iATKOS 1.0i version of Leopard.

 

Thanks

Greetings,

Igor

I had that problem and the only I fixed it was putting the SATA in SATA1 (not SATA0) and setting the BIOS to use "Combined" Now if you could tell me how your BIOS is setup to get 1333mHZ, it would be greatly appreciated. Mine hangs at boot when I set it that way. You may want to turn the "OC" option off to see if the install sees your SATA controller.

Racko
Racko
Posted
Posted

I've just enabled OC1333MHz option, nothing else. Try to disable OC option and put the FSB on 333MHz and voltage to 1,35V, and report what happens. I have also disabled 3 options, which automatic low down the frequency and voltage of your CPU, according to system use. I think, that you can find them in "Advanced BIOS features" menu. All 3 of them are listed together, so it isn't hard to find it. If you will have any troubles finding those options, let me know and I'll picture where they are for you.

 

Greetings,

Igor

Discobob73
Discobob73
Posted
Posted
I've just enabled OC1333MHz option, nothing else. Try to disable OC option and put the FSB on 333MHz and voltage to 1,35V, and report what happens. I have also disabled 3 options, which automatic low down the frequency and voltage of your CPU, according to system use. I think, that you can find them in "Advanced BIOS features" menu. All 3 of them are listed together, so it isn't hard to find it. If you will have any troubles finding those options, let me know and I'll picture where they are for you.

 

Greetings,

Igor

 

Good deal, I'll give it a go when I get home tonight. Have you tried turning off the OC and seeing if it sees your SATA?

Racko
Racko
Posted
Posted

SATA works like a charm now, when I turned off OC1333MHz option. Thank you! (now I'll have to reinstall my OS X) :blink:

 

EDIT1: Interesting... If I manually set FSB to 333MHz, SATA doesn't work anymore.

EDIT2: SATA2 does work with manually set FSB to 320MHz with Memory multiplier set to 2x.

EDIT3: All works even with multiplier set to 2,5x. I'll picture my settings, when I fresh install it.

 

Greetings,

Igor

Discobob73
Discobob73
Posted
Posted
SATA works like a charm now, when I turned off OC1333MHz option. Thank you! (now I'll have to reinstall my OS X) :angel:

 

EDIT1: Interesting... If I manually set FSB to 333MHz, SATA doesn't work anymore.

EDIT2: SATA2 does work with manually set FSB to 320MHz with Memory multiplier set to 2x.

EDIT3: All works even with multiplier set to 2,5x. I'll picture my settings, when I fresh install it.

 

Greetings,

Igor

 

Grats! Yup, sounds the same for me it seems. I'm thinking of picking up a E4500 to fill the gap and put the E6550 back into my Vista machine for now. Or, use a IDE drive...who knows. Post ur settings, much appreciated.

Discobob73
Discobob73
Posted
Posted
@Racko

if u turned off the OC1333...does it support ur E6750(1333FSB ryt?)..hows ur processor running after turning off the oc1333..can u post ur all bios settings?

 

I'm required to run mine with OC off (1066) on my E6550 (7x266). My BIOS settings with OC enabled were posted earlier in the thread.

 

http://img174.imageshack.us/my.php?image=cimg0284xp4.jpg

Macstevo
Macstevo
Posted
Posted

Hey CMMA seems nobody is replying to our problem, but I've done a bit more digging about and have found another thread on this forum that might help, its http://forum.insanelymac.com/index.php?showtopic=73524 and its for AMD architecture. I had the Kalyway disk with the patch too but I'm downloading the version this thread used, look for "Leopard 10.5.1 for AMD SSE2/SSE3 (32bits)" using google and it should be the 1st return.

 

Hope this is some help to ya and we get the ficon13.gifkin' thing working

Fortran
Fortran
Posted
Posted

Perfect Install

i dont know if im supposed to post any screen captures or not but i have everything working

no patching, just 3 measly kexts applied

 

Mobo: ECS P4M800-PRO (rev 1.1)

CPU: Intel Pentium 4 (socket 775) @ 2.66 (Works)

RAM: 2x512 Generic DDR 333

GFX: eVga 6200 (Works) - titan kext

LAN: Onboard VIA (Works) - ViaRhine kext

USB: Onboard 2.0 - (Works)

Keyboard PS2 : (Works)

Mouse PS2 : (Works)

Sound: Onboard Sound (Works) - AppleAC97Audio kext

FireWire : 3 Port Generic Card (Works)

DVD Burner : Samsung WriteMaster SH-S182D (Perfect)

OS : MacOS x86 10.5 Toh

 

:unsure:

 

Loaded and sucessfully installed FCP 6 (video was glitchy at the begining)

post-164651-1199903756_thumb.png

CBEugene
CBEugene
Posted
Posted

Reporting of an SUCCESSFUL install of an Mac OS X 'Leopard 10.5' operating system from BrazilMAC's DVD.

 

I get additional files from this topic, made things described in this instruction (actually i have an PC-EFI v8 installed, HD partitioned with GUID), by now i have inly two mod's over BrazilMAC DVD: AppleSMBIOS.kext replaced and dsmos.kext added. No kernel's replacements.

 

Info about my system main components:

 

1. 1x Gigabyte GA-945GCMX-S2 motherboard (i945 chipset, GMA950 integrated graphics, some audio codec, Realtec gigabit LAN, 2 memory sockets, 1 PCIe x16, 1 PCIe x4, 2 PCI slots)

2. 1x Socket 775 2MB L2 cache 800 MHz Intel Core 2 Duo 2.2 GHz processor

3. 2x 512 MB 667 MHz DDR2 DIMM from Hynix

4. 1x WDC IDE (PATA) 80 GB hard drive

5. 1x Optiarc IDE (PATA) DVD recorder

 

PS: Devices status:

1. GMA950 works out of box with QE supported, CI hardware accelerated, but no resolution change :unsure:

EDIT: Please pint me to a patch or technique to get res change on GMA950, please.

2. LAN works out of box.

3. Sound does not work, system preferences hangs while trying to demonstrate speech engine.

EDIT: Sound fixed with AzaliaSound.mpkg

4. USB, IDE, SATA is working.

 

PS: How do i check that i have original Mac OS kernel? Everybody talks about 'vanilla' and 'patched', i have one from DVD, actually i do not know what kernel do i have, (except that fact that i tried to install BrazilMAC at work same method and have an infinite reboot cycle because i have an Pentium 4 D at work, but not Core 2 Duo. and i read from this forum that unmodified kernel work only with Core 2 Duo processors).

 

PPS: Sorry for my bad English.

 

EDIT: Just updated to 10.5.1 with software update from internet. Everything still working.

UPDATE: first install was killed by trying to get GMA950 working. Reinstall and get Radeon X1600 from sapphire - working almost perfectly (no DVI output, no dual monitor support) with Natit and no binary patches (i have found that dev id ven1002 dev71C2 is also supported by kext's binary, all you need is to add this dev id to ATIRadeonX1000.kext plist!)

Discobob73
Discobob73
Posted
Posted
1. GMA950 works out of box with QE supported, CI hardware accelerated, but no resolution change :D

EDIT: Please pint me to a patch or technique to get res change on GMA950, please.

 

Check this out, I did it from my running install. Kudos to "Riot"

 

http://forum.insanelymac.com/index.php?s=&...st&p=539139

McIntosh
McIntosh
Posted
Posted

Hi folks who know so many things

 

Please help me find the right thread! I want to successfully run the Onetrack Perfect Install, so i got the brazilmac dvd and the kalyway format cd and efi 5.

 

BUT - I currently run an XP MediaCentreEdition computer (intel conroe), and want to still use XP MCE mainly. So the Mac partition should be the second one and non primary one, preferrably. (I only have One hd, and it's SATA)

 

SO, I started this guide, i made a Mac OSX partition after the NTFS one (with kalyway cd), and then tried the Brazilmac disk - and then I couldn't boot into windows without F8ing the mac login, which said "boot into foreign OS" (that's windows).

 

Next, the brazilmac loading Failed, stopped on the grey apple logo with the spinning loading thing at the start. There was a "not allowed" icon above the grey apple logo. I should have typed -v -s and stuff, but I panicked and aborted and I messed up my partition table and killed windows so I reinstalled windows, and surrendered.

 

So is what I want really possible or it isn't? I tried the Dual Booting sticky thread here, but it talks about XP 64 which I don't have and GUID which i don't understand. please don't delete this until you tell me what else to search for? Thanks mates!

 Share
Go to topic listing
×
×
  • Create New...