Jump to content

Pentium M "Banias" 1.4 GHz

MacFeast

By MacFeast,
in Hardware Components and Drivers

 Share
38 posts in this topic

Recommended Posts

MacFeast
MacFeast
Posted
Posted (edited)

I tried to run 10.4.3 (8F1099), with the SSE2/NX patches. I tried native (booting of a DVD+RW) and from Daemon tools/VMWare. In native the computer just reset and in VMWare it complained about PAE (message is hereEDIT: Removed content violating DMCA EDIT: Removed content violating DMCA urlObviously I tried to boot WinXP with /PAE and to add paevm=true to the vmware config. Nothing worked. According to the HCL, my processor is supposed to work with these patches (at least the 1.6 GHz "banias" but well...).

 

Any hints to what I've forgotten?

Edited by Metrogirl
Link to comment
https://www.insanelymac.com/forum/topic/5877-pentium-m-banias-14-ghz/
Share on other sites
MacFeast
MacFeast
Posted
  • Author
Posted (edited)

After more reading, this only gets more and more confusing. The HCL says the Banias is not supported, but still many users on this forum are using it with success. Please help me. I am totally lost. And after some more homework I find it very very very unlikely that my somewhat modern laptop should not have the PAE, when my ancient web server (celeron 900 mhz) has it (it does not have sse2 though).

 

If it is of any help, I have a Dell Inspiron 8600 (ATI Radeon Mobile 9600), the bus speed is 400 MHz. OSX 10.4.1 did work but I don't have it anymore. Again, any help is highly appreciated. I just killed my linux installation to get this going and I'm getting sick of Windows already.......

 

And I also tried the 8f1111... same problem

Edited by MacFeast
Scothiam
Scothiam
Posted
Posted (edited)

yeah, us pentium m folk seem to be out of luck (unless you have a 533mhz fsb). I found this link which has some info on PM systems, http://win2osx.net/wiki/index.php/Testspecs , but I think the best we can hope for is a 10.4.1 (with execpatch). That is, of course, till the real macintels hit the shelf :( cheers,

 

By the way, PAE was first introduced in the pentium Pro, and has appeared in all(most?) x86 (from intel at least) cpus since. Apparently, it is only in the early pentium Ms (banais and dothan1) that it does not function "completely"(?). So yep, your old celeron has what we need in our much newer systems, d'oh!

Edited by Scothiam
Technobob
Technobob
Posted
Posted

I have both 8F1099 and 8F1111a installed on my Banias CPU so it is possible.

Try using JaS's PPF files found here, they are the easiest to use and this one worked perfect for me.

http://forum.osx86project.org/index.php?showtopic=5710&hl=

MacFeast
MacFeast
Posted
  • Author
Posted

This does not work for me. Tried 8f1099 and 8f1111 with different patches. Native and VMWare, neither worked. I think that some of the (newer) Pentium M:s have PAE and mine does not. That is the only logical explanation. I'm hoping that there will be a no-PAE patch out eventually...

Technobob
Technobob
Posted
Posted
Ok I will give it another try with the JaS.All111aPatches. Maybe I did something wrong / in the wrong order. Luckily I've got a bunch of +RW:s otherwise I would have a nice coaster collection by now....

 

I did not notice you have a Dell you need to use this PPF patch.

 

JaS "This is for sse3 and sse2 systems,But aimed at users that need the RTC patch to the kernel to boot. (DELL computers)"

 

http://forum.osx86project.org/index.php?showtopic=5709&hl=

stmkjp
stmkjp
Posted
Posted
Okay, I got one step further this time. It actually booted to the install screen but then the dreaded multilanguage reboot screen came up as soon as it started copying files. Maybe it's a completely different problem, I don't know.

 

try boot with "-v debug=0x100" option and see what messages show up.

guismai
guismai
Posted
Posted
Okay, I got one step further this time. It actually booted to the install screen but then the dreaded multilanguage reboot screen came up as soon as it started copying files. Maybe it's a completely different problem, I don't know.

 

Hy MacFeast,

 

I want to know if you succed to install the 10.4.3 on your DEll 8600 ?

 

Thx

jcruzlara
jcruzlara
Posted
Posted

I had a problem installing it on my 1.4ghz pentium m too so I installed it on another computer and then copied the partition over to my laptop, but it's really unstable as some one said before you should try to put in -v and -s at the darwing thingy and then just type in sh /etc/rc when it saiys too that got it to work for me

MacFeast
MacFeast
Posted
  • Author
Posted
I had a problem installing it on my 1.4ghz pentium m too so I installed it on another computer and then copied the partition over to my laptop, but it's really unstable as some one said before you should try to put in -v and -s at the darwing thingy and then just type in sh /etc/rc when it saiys too that got it to work for me

 

Can you post the panic details, or at least compare to mine? Maybe we are sharing the same problem?

jcruzlara
jcruzlara
Posted
Posted

sorry took me so long but camera didn't work

 

 

Dec 21 13:55:54 localhost diskarbitrationd(33): unable to moutn /dev/disk0s5 (status code 0x00000047).

panic(cpu 0 caller 0x0019be02): Unresolved kernel trap (CPU 0, Type 0=divide error), registers:

CRO: 0x8001003B, CR2: 0XB820F964, CR3: 0x00d55000, cr4: 0x000006a0

about 14 more of those ^^^ with different numbers

 

Kernel loadble modules in bactrace (with dependencies):

com.apple.driver.appleacpiec(1.0.2)@0x1ea2c000

dependency: comp.apple.iokit.iosbusfamily(1.0.0)@...

dependency: comp.apple.iokit....

dependency: comp.apple....

comp.apple.driver.appleacpiplatform(1.0.2)...

dependency: comp.apple.iokit.ioapcifamily(1.7)@0x1b4da000

dependency: comp.apple.iokit.ioapcifamily(1.1.0)@0x1b4e6000

kernel version:

darwin kernel version 8.3.1: wed nov 2 21:12:54 pst 2005; bla bla bla

 

enterhet mac address: 00.... I'm sure you know the rest

 

 

and with -v -s it just crashes while im trying to clicl next on the first screen

Amazondani
Amazondani
Posted
Posted

Hi people, Hi recently Bought a Toshiba Satellite Pro, With a Pentium M (Banias core) And I`m Trying to innstall OS X 10.4.3 On My system.

I´m getting the sane problem With PAE, VMware Doesn´t boot, And I can´t try for now, a Native boot, because I don´t have a DVD burner.

Do There Is Any way to get 10.4.3 working on VMware?????

 

Thanks!

Amazondani
Amazondani
Posted
Posted

Thanks MacFeast for the wanswer, I´l try to find a compatible one for my notebook.

One more thing...

Could you tell me, witch patchs, i must apply on the iso and post here the links(if you don´t mind)???

And, if there is any kind of trick i must do, to have 8F1099 instaled, can you tell me too???

 

Thanks in advance.....

Technobob
Technobob
Posted
Posted (edited)
Thanks MacFeast for the wanswer, I´l try to find a compatible one for my notebook.

One more thing...

Could you tell me, witch patchs, i must apply on the iso and post here the links(if you don´t mind)???

And, if there is any kind of trick i must do, to have 8F1099 instaled, can you tell me too???

 

Thanks in advance.....

 

You will need this patch

EDIT: Removed content violating DMCA

Edited by Metrogirl
Amazondani
Amazondani
Posted
Posted

I applyed the patch,i get that gray windown with the spinning thing, but it stops there.

I tried -v and here is the result:

http://img335.imageshack.us/img335/1273/withv0qc.jpg

 

With mach_kernel.nonx( i dont know if realy worked) i get:

http://img335.imageshack.us/img335/7...nelnonx4eo.jpeg

 

With mach_kernel.cpuid( i dont know if realy worked too) i get:

http://img335.imageshack.us/img335/4...elcpuid5zd.jpg

 

 

Is Something related with usb???

Do there is any manner to make usb drivers, not to load???

 

In 10.4.1, everything worked very well, the usb was recognized, and every thing( i could see by the hardware information program on the install DVD.

 

Please, help me on gethin 10.4,3 working....

 

thanks in advance....

 Share
Go to topic listing
×
×
  • Create New...