Intel Wireless driver

dmesg.txt ioreg.txt system.txt

sev7en · June 17, 2007

Thanks java for updates but... did you have any news about the 3945?

Cheers,

moseschrist · June 17, 2007

I'm having problems with the iwi2200 drivers... everything works ok until it has to get an IP address. It gets stuck there and just tells me "getting ip address..." and never ends up doing anything... I'm using uphuck's 10.4.9 v1.3 release.

maybe you are trying to connect to ad-hoc network ?

or maybe it's a secure network...

post some logs so we can see what is the problem..

jalavoui, the shift with network_cap..._ibss is ok, it was copied of the ipw_best_network(){..} function

and there is used to filter ibss and bss networks according to the card current mode...

dmtirygr · June 17, 2007

Intel 3945 card in pci express.

the utility does nothing. list of networks prints "hello world", turning LED on and off does not work, nor does changing mode, or anything else. Am I missing something?

PainToad · June 18, 2007

Yea ur manners! These ppl are dev these in their spare time for nothing...how bout some gratitude idiot

dmtirygr · June 18, 2007

i meant no disrespect, and I am a dev too, I'd love to help in development, but for now I was looking for a pointer in the direction of how to get this to work.

PainToad · June 18, 2007

Ok miss read ur 'tone' if its posible to have on online

the driver is not yet working for that card...look back on how to grab a log and submit it here to help them out

Focher · June 18, 2007

Here are my logs. I am using a Thinkpad T60p and have booted the machine with the wireless hardware switch on.

I have an open access point running with the ssid being broadcast. It seems to see the adapter but cannot do anything with it.

1) LED does not toggle.

2) No access points listed under Network List.

3) en1 adapter is showing in ifconfig with proper MAC address

4) Ethernet adapter showing in System Preferences - Network (PCI Ethernet Slot pci8086,4227) but says "not plugged in"

jalavoui · June 19, 2007

i've received this link related with the 4965AGN card

http://intellinuxwireless.org/?p=iwlwifi&n=Downloads

this can be a new iwi project. anyone with the card?

moses,

are you shure?

this code:

if ((priv.ieee->networks[ii].capability & WLAN_CAPABILITY_IBSS) ? 1 : 0)

{

NSString *temp = [[NSBundle mainBundle] pathForResource:@"enc" ofType:@"tif"];

prot = [[NSImage alloc] initWithContentsOfFile:temp];

}

else prot = [[NSImage alloc] init];

should be for WLAN_CAPABILITY_PRIVACY ?? otherwise the "enc.tif" will be set for ibss network

iwi3945

please look at the link above - can someone check if there's a new firmware for this card?

and build a new firmware header for iwi3945?

i can do this but, since i don't have the card, it's better to ask for help

this is the utility i used for converting the firmware - it should help

splitfw.zip

moseschrist · June 19, 2007

oh man, stupid me, how did i made such a mistake...

i'll fix it right away...

krick · June 19, 2007

Still nothing for the 3945ABG right guys ?

Arf. :tomato:

deandaman · June 20, 2007

hi folks

first i would like to thank the developers for the hard effort to get things working here

i've installed the latest version from the site and it went fine and told me to reboot

after the reboot i tried to open the nsgui with no luck

so i went to open the network selector and all it gave me is "Could not get ID for kernel control. 2"

i'm currently running version 10.4.8

my laptop is a sony vgn-a39gp

my wireless card is intel pro/wireless 2200BG

Plmcrzd · June 20, 2007

OK guys yet again another NOOB.

I am running a fujitsu lifebook and everything is great. Except.

1. Marvel Yukon 88E8055 PCI -E GB Ethernet card. It shows up in network preferences but it is greyed out and I can't do anything.

2. Pro/Wireless 3945 ABG. I see the guys are working on it. And I'll keep checking for the fix.

But can someone help with the NIC. A laptop with no network connection is useless.

Thanks in advance.

Focher · June 20, 2007

iwi3945
please look at the link above - can someone check if there's a new firmware for this card?

and build a new firmware header for iwi3945?

i can do this but, since i don't have the card, it's better to ask for help

this is the utility i used for converting the firmware - it should help

Is that uncompiled (it looks like it is). Can you provide a compiled version for those of us who are non-programmers and have neither the skills nor tools to compile anything.

I did a system update from Lenovo on my T60p today (3945abg) and so I should theoretically have the latest firmware.

moseschrist · June 20, 2007

hi folks
first i would like to thank the developers for the hard effort to get things working here

i've installed the latest version from the site and it went fine and told me to reboot

after the reboot i tried to open the nsgui with no luck

so i went to open the network selector and all it gave me is "Could not get ID for kernel control. 2"

i'm currently running version 10.4.8

my laptop is a sony vgn-a39gp

my wireless card is intel pro/wireless 2200BG

this could be a problem with the installer,

i'll check that out...

can you tell me if the file iwi2200.kext exists in your /System/Library/Extensions/ folder ?

jalavoui · June 20, 2007

iwi200

we need people to test the adhoc mode. if you have 2 wireless machines and a router please post some logs so we can improve it

thanks

iwi3945

last file i uploaded is for developers only - don't mess with it if you don't know what you're doing

Danl · June 21, 2007

Ok this may sound stupid, but I was trying to gather logs for the kernel panic on my 2100 (the latest revision) and the system.txt and the dmesg.txt are both empty... mind giving me a play by play of how I "should" be testing the driver :-)... thank you

Plmcrzd · June 22, 2007

Ok guys I have teh 2200 bg adapter. I tried running the .dmg and it went well. I see the card in the network preferences. and on the task bar I see teh wireless icon. I click that and it detects a few wireless signals. But when I try to attach to a network, it just sits there for a few minutes and never gets an IP address. Is there something I need to do or doing wrong.

PLEASE HELp... Total OS X noob........

bezdomny · June 23, 2007

Ok guys I have teh 2200 bg adapter. I tried running the .dmg and it went well. I see the card in the network preferences. and on the task bar I see teh wireless icon. I click that and it detects a few wireless signals. But when I try to attach to a network, it just sits there for a few minutes and never gets an IP address. Is there something I need to do or doing wrong.

PLEASE HELp... Total OS X noob........

Same exact thing happens to me on a Dell inspiron 9300.

GeraldS · June 23, 2007

I'm using osx 10.4.8, semthex kernel 8.8.1 on a hp compaq nx5000 (it has an ipw2100 wifi adapter)

Loading the current iwi2100 kext (revision 465 i think) gives me a kernel panic.

Log files are attached.

I also uploaded some pictures from the kernel panic in single user mode: Image gallery

Funny thing was, when I was running some version of osx 10.4.9 (not sure which one exactly) the driver loaded fine and even showed up in networking options. It finally crashed when I was running NetworkSelector.

I'll investigate it further as soon as I get my dvd with it back.

Btw, you should add the revision numbers and update dates to the download page, makes it much easier to check for newer versions.

moseschrist · June 23, 2007

guys, just wanted to let you know, my laptop suffered from a power surge which killed my HD

so i just finished re-installing osx86 and windows, now i have to redownload xcode which will only happen tomorrow since my d/l speeds here are too slow and in my university i can d/l the whole xcode dmg in 1min...

sev7en · June 23, 2007

iwi3945
last file i uploaded is for developers only - don't mess with it if you don't know what you're doing

jalavoui, first of all... thanks once again for your work. So did you have any (good :thumbsup_anim: ) news about it?

Cheers,

emymrin · June 23, 2007

Intel 2200bg, 10.4.8 Darwin 8.8.1 kernel, latest iwi2200 driver, testing ad-hoc mode.

Second machine is running XP-home and has unsecured ad-hoc network set up which can be used to connect to from XP-Pro without any problems. But it appears that I cannot connect to it from OSX using nsGUI. Ad-hoc is shown in network list but it is not marked as ad-hoc and in addition there is lock icon shown. Also nsGUI won't allow me to create ad-hoc network - "Create Network" button is always disabled.

Please let me know if I do something wrong or how I can help you more.

A stupid question: how can I know installed iwi2200 driver version?

Respekt

Shame on me. Figured out how to create ad-hoc using nsGUI

emymrin · June 23, 2007

Managed to connect to ad-hoc at XP-home machine after manually setting ip and mask. Otherwise ip configuring takes forever. Pinged XP machine. Don't know what else to do Attaching updated logs, sytem.txt size suddenly jumped to over 1Mb...