[pre-release] macOS Sequoia

[cankiulascmnfye]

3 hours ago, robi62 said:

hi has any of you tech guys managed to install sequoia beta on an ivy laptop???

Mine after installation is finished and it boots up after finishing installation I get a kp 

I looked on the web can't find any solution 

This is config I use

 

 

config.plist.zip 5.41 kB · 3 downloads

 

 

Yes. I've installed it on my Lenovo T530

 

General Instructions for IvyBridge and OCLP for hackintoshes: https://github.com/5T33Z0/OC-Little-Translated/blob/main/14_OCLP_Wintel/Guides/Ivy_Bridge.md

[robi62]

30 minutes ago, cankiulascmnfye said:

 

 

Yes. I've installed it on my Lenovo T530

 

General Instructions for IvyBridge and OCLP for hackintoshes: https://github.com/5T33Z0/OC-Little-Translated/blob/main/14_OCLP_Wintel/Guides/Ivy_Bridge.md

My hp 9470m booting fine in sonoma is sequoia the pain

2 hours ago, robi62 said:

@Stefanalmare

this is kp I get with your config

 

[mek21]

1 hour ago, robi62 said:

My hp 9470m booting fine in sonoma is sequoia the pain

@Stefanalmare

this is kp I get with your config

 

 

Robi62, have you tried booting with -igfxvesa kernel flag?

[deeveedee]

@robi62 Just to clarify, you have the exact same laptop as Stefanalmare with the exact same BIOS version and configuration, and you experience the kp when you use Stefanalmare's exact same EFI booting the exact same version of macOS?

Edited September 5, 2024 by deeveedee

[Stefanalmare]

3 hours ago, deeveedee said:

@robi62 Just to clarify, you have the exact same laptop as Stefanalmare with the exact same BIOS version and configuration, and you experience the kp when you use Stefanalmare's exact same EFI booting the exact same version of macOS?

 

Is not the same laptop. I think @chris1111 has the same. This doesn't matter. What matters is that if you receive an EFI you must personalise it for your hardware. First you need to boot! Take out all fancy things, keep the important stuf and try to boot. After that try all things one by one according, like I said before, to your hardware.

Edited September 5, 2024 by Stefanalmare

[robi62]

15 minutes ago, Stefanalmare said:

 

Is not the same laptop. I think @chris1111 has the same. This doesn't matter. What matters is that if you receive an EFI you must personalise it for your hardware. First you need to boot! Take out all fancy things, keep the important stuf and try to boot. After that try all things one by one according, like I said before, to your hardware.

you are right there i managed to make it boot to installer he reaches the menu but after a few second it reboots 

I had to disable mimo to make it boot.

It takes trial and effort some are easier than other I can boot with my efi Sonoma Ventura working like a beauty but when i try Sequoia i cant ever reach the installer menu ...

Im not entirerly sure if it is worth to install Sequoia in such a old laptop but then you really want to succeed .

I rememeber my first hackintosh was with Atom cpu os snow. omg  those where the days

Edited September 5, 2024 by robi62

[Stefanalmare]

7 hours ago, eSaF said:

What if you remove the amfi=0x80 boot-arg and use the Amfi.kext instead?

 

amfi=0x80 boot-arg + amfi.kext in the same time is used by OCLP in some genuine Mac's. I had troubles on some rigs installing Sequoia until I applyed the both. It is not a mistake. It is a solution.

Edited September 5, 2024 by Stefanalmare

[cankiulascmnfye]

What's this boot-arg for?

root-dmg=file:///BaseSystem/BaseSystem.dmg

Isn't this for installation only?

[STLVNUB]

2 hours ago, cankiulascmnfye said:

What's this boot-arg for?

root-dmg=file:///BaseSystem/BaseSystem.dmg

Isn't this for installation only?

Wow It's Been A L O N G Time Since I've Seen That boot-arg

Was A Chameleon Boot-arg Back In The Day

[Rob65]

Realy old boot-arg  

"god and the way of the hack is inscrutable,

everything is possible at launch"

 

I just want to absolve a ssdt-gpu-spoof, but it can't fake dev id!  The Navi 21/23 hdmi works, the PCI list is also fine, but the radeon hardware identifiers remain 743f, neither 7340 nor 731b wants to come in, and VRAM is 4MB and kext does not load!  of course, I know that success does not depend only on this, RX6400 isn't supported!

I'm still trying to inject in preboot with the grub/ command and linux driver inject (the quote above can be used again)

 

 

SSDT-GPURX6400-SPOOF.aml.zip

[robi62]

22 hours ago, cankiulascmnfye said:

 

 

Yes. I've installed it on my Lenovo T530

 

General Instructions for IvyBridge and OCLP for hackintoshes: https://github.com/5T33Z0/OC-Little-Translated/blob/main/14_OCLP_Wintel/Guides/Ivy_Bridge.md

is that you GitHub page???

[BALDY_MAN]

 Z690  hack. At long last up and running again after receiving the replacement Nvme from crucial today

[deeveedee]

New SkyWalk for Sequoia is in the OCLP Repo.  If you're running with an older Skywalk kext, this might explain any Wi-Fi issues after patching with OCLP.

[robi62]

31 minutes ago, deeveedee said:

New SkyWalk for Sequoia is in the OCLP Repo.  If you're running with an older Skywalk kext, this might explain any Wi-Fi issues after patching with OCLP.

That could be my wifi problem with my lenovo m73 tiny

Where can I download it from??

Edited September 6, 2024 by robi62

[deeveedee]

@robi62 How have you been downloading sequoia-development source for your Sequoia OCLP patching?

[robi62]

45 minutes ago, deeveedee said:

@robi62 How have you been downloading sequoia-development source for your Sequoia OCLP patching?

Well latest one was the one with patches for metal for haswell 

The one you need internet to download components

[cankiulascmnfye]

8 hours ago, robi62 said:

is that you GitHub page???

yes, both

[robi62]

4 minutes ago, cankiulascmnfye said:

yes, both

It a wonderlfull github page I always go there to read things about how to do things.

Great work I appreciate what you do . You are a star

[asapreta]

On 6/16/2024 at 2:02 PM, cankiulascmnfye said:

@AlfredoM "EnableForAll" and the other Quirks are not from the official OpenCore boot mager but from the modded version by btwise. So you need to use the modded version and update the config.plist.

 

PS: Updating the modded version of OpenCore with files from the official version will result in the quirks of the modded version not working, since the code required to run these quirks is not included.

 

Well, I my Laptop requires 30+ kexts to work, so in my case I still need -lilubetaall.

 

Hello. 
I don't know why I also have these messages in my boot:

 

00:000 00:000 OCS: No schema for EnableForAll at 0 index, context <Quirks>!

00:000 00:000 OCS: No schema for EnableForAll at 6 index, context <Quirks>!

00:000 00:000 OCS: No schema for SkipCustomEntryCheck at 12 index, context <Boot>!

04:790 04:790 AAPL: #[EB.H.IS|!] Err(0xE) <- RT.GV boot-signature 7C436110-AB2A-4BBB-A880-FE41995C9F82
04:794 00:003 AAPL: #[EB.H.IS|!] Err(0xE) <- RT.GV boot-image-key 7C436110-AB2A-4BBB-A880-FE41995C9F82
04:796 00:002 AAPL: #[EB|H:IS] 0

 

I don't remember using patched OC.
Is it possible to just edit the config.plist to get rid of these errors?

 

Thank you!

 

[cankiulascmnfye]

OCLP 2.0.0 changelog: https://github.com/dortania/OpenCore-Legacy-Patcher/blob/main/CHANGELOG.md#opencore-legacy-patcher-changelog

 

"2.0.0
- Set `AssociatedBundleIdentifiers` property in launch services as an array
- Move to auto-generated pre/postinstall scripts for PKGs
  - Streamlines PKG creation process, ensuring Install and AutoPKG scripts are always in sync
- Add support for `gktool` in PKG postinstall scripts
  - Removes Gatekeeper "verifying" prompt on first launch after PKG installation
  - Note `gktool` is only available on macOS Sonoma and newer
- Resolve unpatching crash edge case when host doesn't require patches.
- Implement new Software Update Catalog Parser for macOS Installers
- Implement new Copy on Write detection mechanism for all file copying operations
  - Implemented using `getattrlist` and `VOL_CAP_INT_CLONE` flag
  - Helps improve performance on APFS volumes
- Increase model range for S1X/S3X patching to include Haswell Macs and `MacPro6,1`
  - Helps avoid an issue where older machines with newer, unsupported SSDs would fail to boot
  - Only affects building EFI from another machine
- Resolve AMD Navi MXM GPU detection for modded iMac9,x-12,x
  - Thanks @Ausdauersportler for the patch!
- Implement early macOS Sequoia support:
  - Supporting Macs with Metal-based graphics:
    - MacBook8,1 - 10,1
    - MacBookAir5,x - 7,x
    - MacBookPro9,x - 14,x
    - Macmini6,x - 7,1
    - iMac13,x - 18,x
      - iMac10,1 - 12,x included if Metal GPU installed.
    - MacPro3,1 - 6,1
      - MacPro3,1 - 5,1 require Metal GPU installed.
      - MacPro3,1 can only boot with 4 cores max currently
    - Xserve2,1 - 3,1
      - Requires Metal GPU installed.
      - Xserve2,1 can only boot with 4 cores max currently
  - Excludes the newly dropped MacBookAir8,x series.
    - No estimate can be given when support will be added.
...

"

 

Seems like it has been merged with the main branch now

 

Edited September 6, 2024 by cankiulascmnfye

[cankiulascmnfye]

43 minutes ago, robi62 said:

It a wonderlfull github page I always go there to read things about how to do things.

Great work I appreciate what you do . You are a star

 

Not really. I am one of the most hated guys to do it. Banned on r/hackintosh and discord But thanks

[ANTIKO]

21 minutes ago, cankiulascmnfye said:

OCLP 2.0.0 changelog: https://github.com/dortania/OpenCore-Legacy-Patcher/blob/sequoia-development/CHANGELOG.md#200

Spoiler

 

 

[cankiulascmnfye]

@eSaF@ANTIKO

 

As I said: the dev branch got merged with the main branch in the mean time!

 

https://github.com/dortania/OpenCore-Legacy-Patcher/blob/main/CHANGELOG.md#opencore-legacy-patcher-changelog

 

Artifacts:

 

https://github.com/dortania/OpenCore-Legacy-Patcher/actions/runs/10745634461

 

 

Edited September 6, 2024 by cankiulascmnfye

[jlrycm]

2 hours ago, asapreta said:

 

Hello. 
I don't know why I also have these messages in my boot:

 

00:000 00:000 OCS: No schema for EnableForAll at 0 index, context <Quirks>!

00:000 00:000 OCS: No schema for EnableForAll at 6 index, context <Quirks>!

00:000 00:000 OCS: No schema for SkipCustomEntryCheck at 12 index, context <Boot>!

04:790 04:790 AAPL: #[EB.H.IS|!] Err(0xE) <- RT.GV boot-signature 7C436110-AB2A-4BBB-A880-FE41995C9F82
04:794 00:003 AAPL: #[EB.H.IS|!] Err(0xE) <- RT.GV boot-image-key 7C436110-AB2A-4BBB-A880-FE41995C9F82
04:796 00:002 AAPL: #[EB|H:IS] 0

 

I don't remember using patched OC.
Is it possible to just edit the config.plist to get rid of these errors?

 

Thank you!

 

@asapreta if you are using the OpenCore official version you should remove the entries from the config file. If using OCAT just make sure you have not defined the modded OC profile in there, otherwise the entries would not go away. 

[robi62]

Finally I managed Sequoia on my hp 9470m 

Thank you for you that have helped me

I used config from t530 GitHub page modified for my hp @cankiulascmnfye thank you for making it easy

Every working good

@Stefanalmare Im going to try again with your config too now that I know why of the error