ic005k Posted September 30, 2019 Share Posted September 30, 2019 Questions about ReleaseUsbOwnership? My Dell laptop (7472) must be selected by FixOwnership in Clover to boot normally, otherwise it will freeze at a certain kext during startup. Selecting ReleaseUsbOwnership in the OC does not solve the problem of screen freeze during the boot process. Or how can I replace the FixOwnership option in Clover? This problem has been bothering me for a long time! thank! Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/75/#findComment-2691786 Share on other sites More sharing options...
karacho Posted September 30, 2019 Share Posted September 30, 2019 (edited) 2 hours ago, Andrey1970 said: Therefore in an example it is shown: https://github.com/acidanthera/OpenCorePkg/blob/master/Docs/Sample.plist#L691 @Andrey1970 Ya, i know. But i choosed VboxHfs.efi in OC_EFI_Maker and i'm always wondering, why my Recovery won't boot, because macOS and Windows boot up fine. Somewhere i read, i have to wait. Sometimes it could take about 2 Minutes. Then i found this Threat and i swapped VboxHfs.efi with HfsPlus.efi and change the Driver entry in UEFI section. Now it works as expected. On the other Hand, i'm not able to boot into Linux an another SSD. I created an entry in Misc->Entries. I'm able to get the Grub Menu, but when i hit Enter nothing happens, but Display turns black and keyboard illumination and mouse sensor going off. Any suggestions? Edited September 30, 2019 by karacho_ak Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/75/#findComment-2691788 Share on other sites More sharing options...
Andres ZeroCross Posted September 30, 2019 Share Posted September 30, 2019 (edited) 23 hours ago, STLVNUB said: Thumbs UP!!! Tankx So what is different, I can't see! In your case,, you need to remove _STA Method from your RTC device. I just rename it with ACPI patch, so _STA of RTC will return 0x0f 14 hours ago, karacho_ak said: @Andrey1970 Ya, i know. But i choosed VboxHfs.efi in OC_EFI_Maker and i'm always wondering, why my Recovery won't boot, because macOS and Windows boot up fine. Somewhere i read, i have to wait. Sometimes it could take about 2 Minutes. Then i found this Threat and i swapped VboxHfs.efi with HfsPlus.efi and change the Driver entry in UEFI section. Now it works as expected. On the other Hand, i'm not able to boot into Linux an another SSD. I created an entry in Misc->Entries. I'm able to get the Grub Menu, but when i hit Enter nothing happens, but Display turns black and keyboard illumination and mouse sensor going off. Any suggestions? Maybe your patched DSDT is not compatible with your Linux system??? Edited October 1, 2019 by Andres ZeroCross 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/75/#findComment-2691802 Share on other sites More sharing options...
Erroruser Posted September 30, 2019 Share Posted September 30, 2019 (edited) on a laptop using HP Notebook - 15-ay028ca i get this before the boot picker what would it be that i am looking for to hide these or a fix, thank you Edited September 30, 2019 by errorexists Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/75/#findComment-2691804 Share on other sites More sharing options...
Andres ZeroCross Posted September 30, 2019 Share Posted September 30, 2019 (edited) 6 minutes ago, errorexists said: on a laptop using HP Notebook - 15-ay028ca i get this before the boot picker what would it be that i am looking for to hide these or a fix, thank you It's because you didn't read the DOC. There is no match Kernel in newest commit. Only MinKernel and max kernel,, try to read Doc of full sample plist in kernel section Edited September 30, 2019 by Andres ZeroCross Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/75/#findComment-2691805 Share on other sites More sharing options...
Erroruser Posted September 30, 2019 Share Posted September 30, 2019 1 hour ago, errorexists said: on a laptop using HP Notebook - 15-ay028ca i get this before the boot picker what would it be that i am looking for to hide these or a fix, thank you Solved Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/75/#findComment-2691810 Share on other sites More sharing options...
Andres ZeroCross Posted September 30, 2019 Share Posted September 30, 2019 (edited) 40 minutes ago, Blink.shadow said: Where can I get the official NvmEdpressDxe? thanks Why did you need this?? 6 hours ago, ic005k said: Questions about ReleaseUsbOwnership? My Dell laptop (7472) must be selected by FixOwnership in Clover to boot normally, otherwise it will freeze at a certain kext during startup. Selecting ReleaseUsbOwnership in the OC does not solve the problem of screen freeze during the boot process. Or how can I replace the FixOwnership option in Clover? This problem has been bothering me for a long time! thank! How about go to your BIOS, and search for XHCI Handoff and set it to Enable (or similar setting options) then you don't need this USBOwnership again in config.plist Edited September 30, 2019 by Andres ZeroCross Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/75/#findComment-2691822 Share on other sites More sharing options...
karacho Posted September 30, 2019 Share Posted September 30, 2019 3 hours ago, Andres ZeroCross said: Maybe your patched DSDT is not compatible with your Linux system??? @Andres ZeroCross It bootet with clover before. Do you mind there are so much differences between CL and OC? Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/75/#findComment-2691824 Share on other sites More sharing options...
Andres ZeroCross Posted September 30, 2019 Share Posted September 30, 2019 8 minutes ago, karacho_ak said: @Andres ZeroCross It bootet with clover before. Do you mind there are so much differences between CL and OC? CLOVER won't force your patched dsdt to be used in Linux, but OC is different. OC will use Patched DSDT to Windows, Linux, macOS and all OS that you booted with OC Bootloader 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/75/#findComment-2691825 Share on other sites More sharing options...
ic005k Posted September 30, 2019 Share Posted September 30, 2019 2 hours ago, Andres ZeroCross said: Why did you need this?? How about go to your BIOS, and search for XHCI Handoff and set it to Enable (or similar setting options) then you don't need this USBOwnership again in config.plist Thanks Reply. Because my notebook must rely on the FixOwnership option in Clover to boot normally, otherwise a freeze screen will appear during the boot process. My computer is a notebook. There is no such xHCI Handoff option in the BIOS. This is a common option on desktop computers, but laptops generally do not. Perhaps there are some problems with the ReleaseUsbOwnership option in OC. Isn't it exactly equivalent to FixOwnership in Clover? Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/75/#findComment-2691834 Share on other sites More sharing options...
Andres ZeroCross Posted October 1, 2019 Share Posted October 1, 2019 2 hours ago, ic005k said: Thanks Reply. Because my notebook must rely on the FixOwnership option in Clover to boot normally, otherwise a freeze screen will appear during the boot process. My computer is a notebook. There is no such xHCI Handoff option in the BIOS. This is a common option on desktop computers, but laptops generally do not. Perhaps there are some problems with the ReleaseUsbOwnership option in OC. Isn't it exactly equivalent to FixOwnership in Clover? But your notebook support UEFI boot. Just boot in UEFI instead legacy. This problem just for legacy boot only. UEFI Boot doesn't need USBOwnership/Permission 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/75/#findComment-2691839 Share on other sites More sharing options...
iGPU Posted October 1, 2019 Share Posted October 1, 2019 10 hours ago, Andres ZeroCross said: It's because you didn't read the DOC. There is no match Kernel in newest commit. Only MinKernel and max kernel,, try to read Doc of full sample plist in kernel section No Match Kernel in newest commit? v051 doc's page 18, Sections 7.3 and 7.4 have a MatchKernel, both are usually empty strings. Also, page 19, Section 7.6 has a MatchKernel. Meanwhile, I don't see any Min or Max Kernels in v051. Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/75/#findComment-2691848 Share on other sites More sharing options...
Andres ZeroCross Posted October 1, 2019 Share Posted October 1, 2019 (edited) 2 minutes ago, iGPU said: No Match Kernel in newest commit? v051 doc's page 18, Sections 7.3 and 7.4 have a MatchKernel, both are usually empty strings. Also, page 19, Section 7.6 has a MatchKernel. Meanwhile, I don't see any Min or Max Kernels in v051. Open SampleFullPlist and search for "Match", you will understand Edited October 1, 2019 by Andres ZeroCross Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/75/#findComment-2691849 Share on other sites More sharing options...
iGPU Posted October 1, 2019 Share Posted October 1, 2019 (edited) Sorry, but I don't see that in my latest compiled v051 (OCBuilder) SampleFull.plist, nor in the latest doc. Edited October 1, 2019 by iGPU Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/75/#findComment-2691850 Share on other sites More sharing options...
Andres ZeroCross Posted October 1, 2019 Share Posted October 1, 2019 5 minutes ago, iGPU said: Sorry, but I don't see that in my latest compiled v051 (OCBuilder) SampleFull.plist, nor in the latest doc: To read doc you only need to github and you can directly read it 1. Confguration.pdf = https://github.com/acidanthera/OpenCorePkg/blob/master/Docs/Configuration.pdf 2. Difference : https://github.com/acidanthera/OpenCorePkg/blob/master/Docs/Differences/Differences.pdf 3. Sample full plist : https://github.com/acidanthera/OpenCorePkg/blob/master/Docs/SampleFull.plist 1 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/75/#findComment-2691852 Share on other sites More sharing options...
iGPU Posted October 1, 2019 Share Posted October 1, 2019 1 minute ago, Andres ZeroCross said: To read doc you only need to github and you can directly read it 1. Confguration.pdf = https://github.com/acidanthera/OpenCorePkg/blob/master/Docs/Configuration.pdf 2. Difference : https://github.com/acidanthera/OpenCorePkg/blob/master/Docs/Differences/Differences.pdf 3. Sample full plist : https://github.com/acidanthera/OpenCorePkg/blob/master/Docs/SampleFull.plist You are correct. My v051 was compiled yesterday, but Doc is dated 10-Sept; the version you reference is 25-Sept. OCBuilder somehow didn't take the latest docs or plist files... Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/75/#findComment-2691853 Share on other sites More sharing options...
Andres ZeroCross Posted October 1, 2019 Share Posted October 1, 2019 Just now, iGPU said: You are correct. My v051 was compiled yesterday, but Doc is dated 10-Sept; the version you reference is 25-Sept. OCBuilder somehow didn't take the latest docs or plist files... 1. Open terminal type cd "~/Desktop" press enter 2. Then type "git clone https://github.com/acidanthera/OpenCorePkg.git" press enter 3. To check update latest commit just type "find . -type d -depth 1 -exec git --git-dir={}/.git --work-tree=$PWD/{} pull origin master \;" press enter 4. To build OC just type "cd OpenCorePkg" press enter, then type "./macbuild.tool" 5. Done. Repeat as you want for step 3 to check update latest commit, sorry for bad english 3 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/75/#findComment-2691854 Share on other sites More sharing options...
STLVNUB Posted October 1, 2019 Share Posted October 1, 2019 (edited) 13 hours ago, Andres ZeroCross said: In your case,, you need to remove _STA Method from your RTC device. I just rename it with ACPI patch, so _STA of RTC will return 0x0f Maybe your patched DSDT is not compatible with your Linux system??? Job well done, thanks, I'd have never been able to find that Edited October 1, 2019 by STLVNUB Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/75/#findComment-2691858 Share on other sites More sharing options...
Pavo Posted October 1, 2019 Share Posted October 1, 2019 9 hours ago, iGPU said: You are correct. My v051 was compiled yesterday, but Doc is dated 10-Sept; the version you reference is 25-Sept. OCBuilder somehow didn't take the latest docs or plist files... OCBuilder uses whatever version that is on the latest committed version on GitHub. So there is no way that OCBuilder gave you an older version of the docs or plist files. 3 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/75/#findComment-2691876 Share on other sites More sharing options...
mhaeuser Posted October 1, 2019 Share Posted October 1, 2019 @errorexists Cannot reproduce in userland, can you upload your prelinkedkernel too? Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/75/#findComment-2691916 Share on other sites More sharing options...
fangf2018 Posted October 3, 2019 Share Posted October 3, 2019 if ShowPicker: YES，The startup page gets stuck and can only be restarted. Show Picker: NO can enter the system normally。 EFI.zip Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/75/#findComment-2692127 Share on other sites More sharing options...
droples Posted October 4, 2019 Share Posted October 4, 2019 3 hours ago, fangf2018 said: if ShowPicker: YES，The startup page gets stuck and can only be restarted. Show Picker: NO can enter the system normally。 EFI.zip 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/75/#findComment-2692149 Share on other sites More sharing options...
Erroruser Posted October 4, 2019 Share Posted October 4, 2019 6 minutes ago, droples said: remove the emuvarible an apfs.efi not needed then set show picker to yes Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/75/#findComment-2692151 Share on other sites More sharing options...
ic005k Posted October 4, 2019 Share Posted October 4, 2019 Hello everyone! When I use VoodooI2C.kext on OC, all functions are normal, but I can't restart or shut down normally (the desktop freezes when I restart or shut down, the system does not respond). What is the problem with this? VoodooI2C.kext can be shut down or restarted normally in Clover. Please give pointers one or two, thank you! Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/75/#findComment-2692159 Share on other sites More sharing options...
mhaeuser Posted October 4, 2019 Share Posted October 4, 2019 @Blink.shadow Always provide a log along with the error description Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/75/#findComment-2692190 Share on other sites More sharing options...
Recommended Posts