gzbenson Posted April 4, 2020 Share Posted April 4, 2020 On 4/3/2020 at 3:31 AM, namthienvo said: That's very odd considering booting from "internal storage" is the only option you have as an entry. I would try installing clover manually into your partition/drive, then use my clover. If that has not worked for you.. then sure, see if the boot folder helps BOOT.rar thank you again , i can boot into the clover interface normally when replace the boot file from you . Link to comment Share on other sites More sharing options...
gzbenson Posted April 4, 2020 Share Posted April 4, 2020 On 4/3/2020 at 12:39 PM, Fernando809 said: I already solved the problem (Use the kexts versions of my 10.14.6) how to modified the dsdt to display battery power percentage? Link to comment Share on other sites More sharing options...
Fernando809 Posted April 4, 2020 Share Posted April 4, 2020 13 hours ago, gzbenson said: how to modified the dsdt to display battery power percentage? A solution for the Surface Pro 2017 has not yet been found because the way to measure the battery percentage is very different from previous surfaces that have already been solved. Link to comment Share on other sites More sharing options...
Fernando809 Posted April 5, 2020 Share Posted April 5, 2020 I can't watch videos on apple tv + or apple music (Problem caused by DRM issue, someone to confirm if you are in the same situation as me) Link to comment Share on other sites More sharing options...
rdsgalid Posted April 5, 2020 Share Posted April 5, 2020 Has anyone OpenCore'ed this Surface Pro 2017? Would be interested to see the config. Link to comment Share on other sites More sharing options...
gzbenson Posted April 5, 2020 Share Posted April 5, 2020 14 hours ago, Fernando809 said: A solution for the Surface Pro 2017 has not yet been found because the way to measure the battery percentage is very different from previous surfaces that have already been solved. As i known that , surface pro 4 & surface pro 6 & Surfacebook1/2 also solved the display of power percentage reference: https://github.com/bigsadan/surface-pro-4-hackintosh https://github.com/molie34/Surface-Pro-6-macOS Link to comment Share on other sites More sharing options...
Fernando809 Posted April 5, 2020 Share Posted April 5, 2020 7 hours ago, gzbenson said: As i known that , surface pro 4 & surface pro 6 & Surfacebook1/2 also solved the display of power percentage reference: https://github.com/bigsadan/surface-pro-4-hackintosh https://github.com/molie34/Surface-Pro-6-macOS As I mentioned earlier on Surface Pro 4 if this worked, but since Surface Pro 5 there is no solution, in the link of github In a section of things that does not work he says ” 电量显示；” referring to the percentage of the battery that does not work Link to comment Share on other sites More sharing options...
Fernando809 Posted April 18, 2020 Share Posted April 18, 2020 macOS 10.15.5 Beta 2 is Out! Link to comment Share on other sites More sharing options...
ojm6 Posted April 18, 2020 Share Posted April 18, 2020 Thanks Thanks Link to comment Share on other sites More sharing options...
gzbenson Posted April 19, 2020 Share Posted April 19, 2020 22 hours ago, Fernando809 said: macOS 10.15.5 Beta 2 is Out! Is it work in 10.15.5 Beta 2 ? Link to comment Share on other sites More sharing options...
Fernando809 Posted April 20, 2020 Share Posted April 20, 2020 I don't think so because they are just minor changes Link to comment Share on other sites More sharing options...
gzbenson Posted April 21, 2020 Share Posted April 21, 2020 5 hours ago, Fernando809 said: I don't think so because they are just minor changes Hopefully the new kext will be completed soon for Surface series It looks like Linux already supports it Link to comment Share on other sites More sharing options...
omar jasim Posted April 26, 2020 Share Posted April 26, 2020 (edited) On 4/3/2020 at 6:45 AM, gzbenson said: Yes , 10.14.6 ,my following funtions are working, using this EFI https://github.com/bigsadan/surface-pro-4-hackintosh What is working: QE/CI (Ok) Audio (Ok) Brightness (Ok) Touchpad with gestures (Ok) Keyboard (Ok) NVMe (Ok) Battery (Ok) Sleep/Wake (Ok) What is NOT working: Wi-Fi Bluetooth Camera Touchscreen does it need internet connection to install catalina ??or even mojave? cause every time i try it needs internet connection and surface's wifi doesn't work as u know anyway to install without internet connection? or even using surface dock? Edited April 26, 2020 by omar jasim Link to comment Share on other sites More sharing options...
omar jasim Posted April 26, 2020 Share Posted April 26, 2020 On 4/1/2020 at 12:17 PM, namthienvo said: Temporary solution: if you need graphics on Catalina, downgrade back to 10.15.3. Everything works as it used to. Hopefully someone can fix the issue with 10.15.4 in the future. perhaps we jus have to wait for a clover patch, doesnt look like 10.15.4 is fully supported yet. installed it with internet connection? any advice how? Link to comment Share on other sites More sharing options...
Fernando809 Posted April 27, 2020 Share Posted April 27, 2020 On 4/26/2020 at 6:35 AM, omar jasim said: does it need internet connection to install catalina ??or even mojave? cause every time i try it needs internet connection and surface's wifi doesn't work as u know anyway to install without internet connection? or even using surface dock? you need to get the installer from another source because that installer needs to have internet active to do it and run the command {sudo ntpdate -u time.apple.com} (You can try checking the time in the terminal and changing it if necessary) Link to comment Share on other sites More sharing options...
rdsgalid Posted April 28, 2020 Share Posted April 28, 2020 11 hours ago, Fernando809 said: you need to get the installer from another source because that installer needs to have internet active to do it and run the command {sudo ntpdate -u time.apple.com} (You can try checking the time in the terminal and changing it if necessary) What you need is a full body Catalina installer in the USB. Follow my guide here: https://myopencore.wordpress.com/2020/03/21/fullinstaller/ Enjoy, and drop a comment. Link to comment Share on other sites More sharing options...
rdsgalid Posted April 28, 2020 Share Posted April 28, 2020 On 4/5/2020 at 8:54 PM, rdsgalid said: Has anyone OpenCore'ed this Surface Pro 2017? Would be interested to see the config. UPDATE! I have successfully (partly; haven't finished the full installation) OpenCore'd this machine (Surface Pro 2017 (i5 7300U, ALC298, Intel HD 620) with OpenCore 0.5.6 and Catalina 10.15.4--I have reached the Recovery/MacOS Utiliies stage ( but I am debating whether want to potentially mess up what's well working now (with Clover & Catalina 10.15.3) with continuing this OpenCOre 0.5.6 with Catalina 10.15.4 project.) Here's the EFI: https://www.dropbox.com/s/ef53e94scyhqfrq/surfacepro2017.zip?dl=0 Report back if you have a full installation, ok? Enjoy. 1 Link to comment Share on other sites More sharing options...
enfilator37100 Posted April 28, 2020 Share Posted April 28, 2020 hello me I'm interested in your config I have the same pro surface as you :-) Link to comment Share on other sites More sharing options...
rdsgalid Posted April 29, 2020 Share Posted April 29, 2020 On 4/28/2020 at 4:53 PM, enfilator37100 said: hello me I'm interested in your config I have the same pro surface as you :-) There is the link Link to comment Share on other sites More sharing options...
enfilator37100 Posted April 29, 2020 Share Posted April 29, 2020 9 hours ago, rdsgalid said: There is the link ok doesn't work for me after -V black screen mode: s Link to comment Share on other sites More sharing options...
enfilator37100 Posted April 29, 2020 Share Posted April 29, 2020 21 minutes ago, enfilator37100 said: ok doesn't work for me after -V black screen mode: s https://share.icloud.com/photos/0Qq3EPCyUUjAFvqCkEUSkg3UQ Link to comment Share on other sites More sharing options...
Fernando809 Posted April 30, 2020 Share Posted April 30, 2020 5 hours ago, enfilator37100 said: ok no me funciona después del modo de pantalla negra -V: s Ohhh man, You need to preare the Bios, do the following... 1-You have to enter the BIOS, when turning on the surface with the volume button + pressed to access the BIOS. 2- then we go to "Security" - "Secure boot" - "Change configuration" and set "None" We also disable Trusted Platform Module (TPM). Once we do this, Surface will allow us to start any other operating system. It will appear when we start it with a red stripe with a padlock (good sign) Link to comment Share on other sites More sharing options...
enfilator37100 Posted April 30, 2020 Share Posted April 30, 2020 4 hours ago, Fernando809 said: Ohhh man, You need to preare the Bios, do the following... 1-You have to enter the BIOS, when turning on the surface with the volume button + pressed to access the BIOS. 2- then we go to "Security" - "Secure boot" - "Change configuration" and set "None" We also disable Trusted Platform Module (TPM). Once we do this, Surface will allow us to start any other operating system. It will appear when we start it with a red stripe with a padlock (good sign) Buenos dias, gracias por su ayuda, pero la seguridad de bios ya está desactivada porque mi superficie y bajo osx de sierra alta :-) Link to comment Share on other sites More sharing options...
enfilator37100 Posted April 30, 2020 Share Posted April 30, 2020 Voilà la version rdsgalid fonctionnel sur la surface pro I5. la carte graphics 620 fonctionne pas correctement par contre :-( https://mega.nz/file/ztEm3SBS#26xPZ1tMi1HzRGstnV4IZlLVWgXkRoBNM0ofZu1vM1A Voilà la version rdsgalid fonctionnel sur la surface pro I5. la carte graphics 620 fonctionne pas correctement par contre :-( https://mega.nz/file/ztEm3SBS#26xPZ1tMi1HzRGstnV4IZlLVWgXkRoBNM0ofZu1vM1A Link to comment Share on other sites More sharing options...
Fernando809 Posted April 30, 2020 Share Posted April 30, 2020 6 hours ago, enfilator37100 said: Voilà la version rdsgalid fonctionnel sur la surface pro I5. la carte graphics 620 fonctionne pas correctement par contre :-( https://mega.nz/file/ztEm3SBS#26xPZ1tMi1HzRGstnV4IZlLVWgXkRoBNM0ofZu1vM1A Voilà la version rdsgalid fonctionnel sur la surface pro I5. la carte graphics 620 fonctionne pas correctement par contre :-( https://mega.nz/file/ztEm3SBS#26xPZ1tMi1HzRGstnV4IZlLVWgXkRoBNM0ofZu1vM1A You must enter "Graphics Injector" and change the values of "Platform-id: by 12345678 after the system loads rebuild the cache then restart and then again You must enter" Graphics Injector "and change the values of" Platform-id: by 0x59260002 Link to comment Share on other sites More sharing options...
Recommended Posts